Fine continuous with G Router but not with N

Similar Questions

• Laptop HP G70 connection to the router but not the internet

  I have a laptop HP G70 running windows 7, I got a new router installed. My computer to the router, but not to the internet links. I tried the software updates for my drivers running, doing all used to end router for example change etc channel/parameters/IP wifi. I tried to turn off the wireless, reset the router and re enabling it does not work.

  It will connect to the internet ethernet of nis.

  My laptop connects fine with other networks if it is not wireless.

  All other devices are connected to the router.

  Please help this is extremely frustrating.

  You are the very welcome.

  I compressed the file and downloaded on my Skydrive account, which I shared the link below.

  Download, unzip and run the file called sp54972.

  https://onedrive.live.com/redir?RESID=832F4957D2E51B93! 263 & authkey =! AEOhdjA3QVhETy0 & ithint = % 2czip

• Satellite L455-S5045 laptop Realtek8187B wireless 802. 11b / g connects to a d-link router, but not internet access.

  PC laptop Toshiba Satellite L455-S5045, Realtek8187B wireless 802. 11b / g connects to a d-link router, but not internet access. go to google.com and States page cannot be displayed, I ran diagnostics and reports, everything is configured properly. the wireless signal that d-Link has is 802.11n with a WiFi Code and running XP, I have WIN 7. Do I need to driver 802.11n, if I do, why I can not download it

  Hello

  To help you better, please answer these questions.

  1. don't you say no Internet access in the notification bar?

  2. what diagnosis you have to run?

  3 did you do changes on the computer before the show?

  To solve your problem, try the provided items.

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-in/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  You can check the link:

  Troubleshooting Wizard

  Reference (my computer can not connect to Internet)

  http://support.Toshiba.com/support/troubleshootSelfService?PRDTYPE=computers

  If you need help with the Windows operating system, just tell me and we will be happy to help you.

• Office jet pro 8600 connect with router but not recognized on the network

  I just installed new router e1200 lonksys. JO HP 8600 pro connects with the router, but the printer cannot see 8600. IP 169.254.223.37 on said install ip is the placeholder and printer not connected. have restarted once 1000 and tried to reconnect. New router has OMP and thrust of 3 seconds the button on the router. Also failed to connect on the router definition reviews

  8600 worked fine on the old router. Problem started when I connected the router after that cable modem connected then modem vonage. Previous setting was cable - vonanage and wireless router - all worked well then.

  Also downloaded 8600 new complete software after losing the Wi - Fi connection - please help!

  If the Ethernet cable is plugged into the printer, it will disable the wireless radio.

  If this is not the case in the network menu, network by default.  Then, in the same network menu, run the Wireless Setup Wizard.

  If this does not work, we will come on your new router a bit.

• Site to site VPN, can ping router but not customers

  I set up a site to site between an ASA5505 (company) and a router of the 871w (remote control).  The tunnel is up, and I can ping anything on the remote network business network.  However, with the passage of the company remotely, I am only able to ping the router, but no clients are connected on it.  The IP address for the router is on the same subnet as the rest of the guests (192.168.1.0/24).  I looked at the logs on the ASA5505 and it seems to be the way the traffic fine, so the problem seems to sit on the 871.  To reinforce this, to actually start the tunnel linking the corporate network using a ping to one of these customers (even if the ping command:------)

  I'll be happy to provide any additional information necessary.  Thank you.

  Hey Marshall.

  Can you confirm for me that there is no firewall on clients that might be blocking pings? The problem description that you provided it seems that as long as the clients initiate the ping, it is successful, but the reverse is not true. This seems to indicate something about customers may be blocking traffic. Also since you say that you are able to ping the router with the ip address in the same subnet as the clients it further strengthens my conviction that the issue could be with the customers.

  Kind regards

  ATRI.

• Can connect to the wireless router, but not to the Internet

  Because I could not find this post, I published in my problem to

  Windows 7, connecting Local only, no Internet

  I think I described the problem a bit better here.

  I had a Gateway DX4300-17 with Windows 7 Home Premium for about six weeks. I connect to the Internet via a Netgear wireless router. My Internet connection dropped often, but I've always been able to reconnect to the Saturday. Since the start-up my computer Sunday, when I try to connect to the Internet, the system tells me that I am connected to the router, but there is no connection between the router and the Internet. I did a system restore to Friday, but it did not help. I searched the Knowledge Base and tried several things I found there. Running "sfc/scannow" indicates that all is well. I disabled the '6' Protocol (I don't remember the letters that were with this, but you probably know what I mean). This made no difference either. I thought I would ask for help here in the hopes of not having to restart the computer to the "hospital". That's a very different problem here barely a week. I need help, please.

  Hello Bill6009,

  Have you tried to boot your computer in SafeMode w/network to see if the problem persists?

  If so, try to perform a clean boot to see if you encounter the same problem.

  Please post back your results if we can help get your problem solved J

  Adam
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Re: office jet pro 8600 connect with router but not recognized on the network

  BUT... it did NOT work for me.

  I have the same situation:

  1. I bought and installed e-8600 HP OfficeJet Pro on my Linksys wireless network, while it was usable by anyone with connectivity to my wireless network.  It is installed without problem.

  2. I need to reconfigure and move my Pro e-8600 to my Linksys Wireless to my network routers NETGEAR AC1450 wireless, so I removed the printer and uninstalled all the software Pro e-8600 my laptop ACER running 7/Windows-b4bit.  I have restored the default settings on my Pro e-8600, reconnected to my network NETGEAR Wireless and restarted all power of the State.

  3. when I downloaded the latest driver for the Pro e-8600 to hp.com and tried to reinstall the e-8600 Pro on my NETGEAR network, the installation software couldn't recognize the e-8600 Pro on my NETGEAR network.  During the process, the software recognized the network, but the printer is not found.

  Help!

  Hello-

  Have you checked your router settings?

  Although the wizard detects the printer and you can reach the built-in Web server, the printer is not communicating with the router effectively.

• Attempt to connect wi fi on my Dell computer, running windows XP? Have DSL but not Ethernet. Faced with problems. Checked with CISCO router but not help there. CANY anyone help

  I have a problem connecting to a Cisco E100 router to my computer. My count (office) does not have a wireless. I have DSL from. Cisco tells me to plug a router using Ethernet cable to connect. I don't have an Ethernet connection on my computer. At present I have USB connect the computer to the Westell modem.  Can anyone help? I hope this is enough information. Basically what I'm hoping to do is to install the WiFi so I can use a tablet now and maybe a laptop this last on.

  Thank you

  On the routers only house you can use USB connections are those provided by some ISPs.  An Ethernet connection between the router and the computer is far more preferred.

  Your router a Cisco E1000 or is it really E100 (I thought that Cisco makes a model with this designation not)?

  It is quite surprising that you don't have an Ethernet connection that is built into your computer.  What is the complete model number (or, preferably, the Number of Service Dell)?

  Open the Device Manager (start > run > devmgmt.msc > OK).  Expand the "Network card" category by clicking on the + next to him.  What devices are listed in this category.

  If you don't really have an Ethernet or an adapter wireless built into your computer, you can add one, using a PCI internal (if you have a desktop/Tower computer) or external (PC card for laptops) or USB to laptops or desktop/towers.

  Also, the normal configuration is to connect your DSL modem to the router and then the router to the computer.  If your Westell modem has an Ethernet connection, you must use your new router in a non-standard configuration.  Even if the Westell modem has an Ethernet port, you may need to do some reconfiguration for her as well.  What is the complete model of the Westell modem number?

• Portege M400 connected to the WiFi router, but not the navigation of Web pages

  Hello

  I use M400 laptop computer series that I bought in 2005 and do not know if the guarantee was already finsihed, although I paid extra for an extended warranty.
  You should check a second time.

  My wireless connection was working fine with my conection DSL broadband 2 years ago, I was using router Netgear wireless. In the last 2 years that I did not use wirless conection, recently I bought Thomson TG585 router to my ADSL connection wireless broadband. This wireless router works fine with my other Mac desktop computer but my laptop is not browse a Web page if it says connected with WiFi router.

  I went through all the settings and even I have discussed this question with the technical team bradband and say there is problem with my computer laptop bcz Mac Desktop works fine.

  I checked in the wireless troubleshooting setting and still not able to solve this problem.
  I use KesperKey Internet Security and I tried to turn it off for the test connection wireless but always face same problem.

  I wonder if anyone can help me?

  Thank you.

  Hello

  Disable all the security settings on your router and then try to connect the M400 protected wireless.
  If you will be able to connect to the WLan and will be able to navigate a few s webpage you could activate step by step all the security settings such as encryption of WLan, Mac address filtering, SSID hidden, etc.

  By the way; Have you tried to update the driver WLan?

• Wusb300n connects to the router, but not to the Internet

  Recently I have formatted my hard drive and reinstalled Windows XP Home Edition. Initially, wireless has functioned well. Now he works briefly then stops. The router works fine (another I have it right now). The strange thing is that the utility monitor wireless network which is installed with the drivers for the USB wireless network card says that I'm connected to the network, shows the correct information, and shows even the networks belonging to the neighbors. Everything looks OK. But there is no connection to the Internet and I can't share files with my other computer. What is going on?!

  Another detail: it works for a while at first, allowing me to connect to the other computer on the network and browse the Web, but then it stops without any indication that something is wrong.

  Help!

  Here is how I solved this problem. I found using the Troubleshoot utility of connection IE 8.0 security protocol used by my wireless router was different from the one I had chosen when I set up the connection (WPA or WEP or somesuch) wireless network. By matching them up, I avoided having then off the connection behavior.

  In addition, it cannot help I installed the wireless card until I installed the drivers of general network for the computer. By removing the two and their resettlement in the proper order (second wireless card) I think I contributed something to address the issue.

• connected to the router but not on internet

  Hi guys... First sorry for my English. Since Sunday that I'm not being able to go on the internet, and I don't know what happened, dor I have nothing.

  I get the correct configuration IP form the router, I've seen with other portable router to register my PC connected, but nothing impossible to navigate. I tried also with static IP address.

  I try a lot of time, disistalled and reinstalled NIC Driver restard PC, router, reset the TCP/IP stack. I am not able to also connect to the router configuration page. If I try to go to 192.168.1.1 a reception "site online, but is not responding...". »

  If I Ping 192.168.1.1 I have recevive request timeout, if I try it with another PC works and go quickly online reaaly. But i have installed in my PC with Virtual BOX, a virtual machine with windows XP and I go online, I can connect to 192.168.1.1.

  I've also tried sfc/scannow, but nothing...

  What happened?... and what I can do?...

  GIO tanks

  You have McAfee? McAfee has been updated at the same time as the last batch of updates from Windows 7 and it seems to be the cause of this problem for most, if not all, users.

  See the communication from this "criticism" - McAfee

  Some customers may experience a loss of network connectivity and/or errors in McAfee Security Center after a recent update

  You should make the fix McAfee, if necessary. There are corresponding communications for their enterprise products.

  I had to run the removal of McAfee Development tool a few times before and it caused a problem with the license if the PC was not connected to the internet during the abduction. Due cat of McAfee support reset their files in order to allow the relocation-reactivation. Here is their link cat - McAfee - media contains the link to the cat

  I got McAfee, but the connection has started working again on its own so I thought I was clear of problems. However, when I checked it says he was doing routine checks the updates in vain when I told it to do a manually. So stick with McAfee you don't follow their procedure of fix would have upgraded my PC at risk by not updated and, like other McAfee ads have since explained, the application did not refer to its database of threats correctly [and this could explain part of the variability of the symptoms of failure but all involved loss of internet connection]. Actually, I removed McAfee then installed Microsoft Security Essentials rather & my answer IE is faster I knew it [even though I had the Add-ons McAfee disabled for centuries].

  - - - - - - - - - - - - -

  If you do not have McAfee then Windows update than kb2705219 can also be a cause as the uninstall that appeared to solve the problem for some users [but I'm not particularly convinced by this]. To uninstall an update - control panel, programs & features, [left side of the window] see installed updates. Wait until the system has finished the research for the list of updates. Select update required, then right click and Uninstall.

• Why my program runs fine in execution of climax, but not normally?

  Hey everybody,

  So I created a program that works very well (to produce a graph of intensity) when I select run, but then when I run the program without execution of climax, the output intensity graph does not appear. I enclose a copy of my program for reference. Thanks in advance for the help!

  What kind of error do you see? What does not work?

  I have all the subVIs that make up your VI you have posted and it would be difficult to say what is happening, but I suspect that you run in some sort of timing issue. When you run with execution highlighting turned on you slowly run downhill. During normal execution things can run before the system is ready. Maybe your initialization of the camera takes time to complete (on the hardware itself) and when you run in normal mode you are trying to access it until it's ready.

• can connect to my laptop to router but not the internet

  I got my son a laptop is a fujitsu, XP home, 1.73 dual core. When I try to connect to the wireless network, it finds my router Belkin Surf N, but it connects with local access only, or limited access when I connect via an ethernet cable to the Web without problem.

  Help, please.

  Hi kevinattard,

  Did you do any hardware changes or software on your computer before this problem?

  You can follow this link completely and check if the problem persists:

  Windows wireless and wired network connection problems

  Hope the helps of information.

• slideshow works fine in ' mode live view ", but not"browser preview ".

  My slideshow looks very well in 'live view' but when I "saw in the browser" it does not appear in Firefox and is a blue square with a question mark in Safari.  It was created in Dreamweaver and the slideshow is 'Advanced Random Images' of Dreamweaver Exchange.

  He worked in browsers, but I had to make some changes. I put the slideshow in 'content' to be centered on the page.

  Centering has worked very well, but now it does not appear.

  Here's that section of my code:

  <! - end .sidebar1 - >
  < /p >
  <! - InstanceEndEditable - > < / div >

  <! - ARI KW Image - >
  < div class = "content" >

  < div id = "slideshow" style = "width: 600px;" margin: 0 auto; padding-bottom: 15px; ">

  < script language = "JavaScript" >
  Beginning of the advance of the Random Images
  Copyright 2001 - 2006 all rights reserved, by Paul Davis - www.kaosweaver.com
  "" "var j, d =" ", l =" ", m =" ", p =" ", q =" ", z =" ", KW_ARI = new Array()
  KW_rs [5000]
  KW_ARI [KW_ARI. Length]='/Gallery_images/slideshow/Auditorium.jpg';
  KW_ARI [KW_ARI. Length]='/Gallery_images/slideshow/boardrm.jpg';
  KW_ARI [KW_ARI. Length]='/Gallery_images/slideshow/classroom.jpg';
  KW_ARI [KW_ARI. Length]='/Gallery_images/slideshow/Conference.jpg';
  KW_ARI [KW_ARI. Length]='/Gallery_images/slideshow/conference2.jpg';
  KW_ARI [KW_ARI. Length]='/Gallery_images/slideshow/courtrm.jpg';
  j = parseInt (Math.Random () * KW_ARI.) Length);
  j = (IsNaN (j))? 0:j;
  document. Write ("< img name = 'randomSlideShow' src ='" + KW_ARI [j] + "" > "");
  function rndSlideShow (t, l) {/ / random slideshow by Kaosweaver}
  x = document.randomSlideShow; j = l; While (l == j) {}
  j = parseInt (Math.Random () * KW_ARI.) Length); j = (IsNaN (j))? 0:j; }
  x.SRC = KW_ARI [j]; setTimeout ("rndSlideShow("+t+","+j+")", t);
  }
  rndSlideShow (5000,0)

  End of the advance of the Random Images
  < /script >
  
  < / div >

  <! - end slide show - >

  <!-InstanceBeginEditable name = 'content'-> < script language = "JavaScript" >

  < /script >

  Any suggestions?

  Thank you!

  Your answer makes me think that an include file is missing on the remote server.  Can you put a link to the page in question?

• Carpet * a DVD UJ850s on Satellite L30 works fine to read the CD but not DVD

  Hello.. This seems to be a different problem with the other DVD problems on the forum.

  I have a brand new PSL33E L30 - 10V running Vista Edition family Basic. It has all the critical updates installed.
  He pre-recorded bed and house burned audio and data CD and burn the CD readable on other machines.
  Device Manager reports DVD works well and the driver is up-to-date.

  However, it will not read blank pre-recorded (correct region) or home burned DVD or DVD format with the
  applications provided or with any other applications, I installed after trying.
  There is no reading error messages - it just hangs and the activity of the DVD light is solid in
  a player and do nothing if you use explore to watch.
  When you try to format - you get "windows is unable to complete this operation."

  Someone at - it ideas if this is likely to be hardware, driver or a vista registry problem and
  How to solve it. Bought online and don't want to send it if there is a software fix.

  Thank you

  Can you start with DVD recovery delivered? Please test and let know us what exactly is going on.