Fine to start Windows and the computer works correctly for 5-10 minutes and locks up.

Similar Questions

• Windows displays the device works correctly. However, the device does not appear in windows Explorer. also, I can not format disks.

  Windows displays the device works correctly.  However, the device does not appear in windows Explorer. also, I can not format disks.

  What should I do next

  Hello

  1. Are you referring to the NEC USB Floppy Driver?
  2. You try to format floppy disks?
  3. Was - this earlier work, if so, did the chnages on the computer before this problem?

  If it worked, I suggest the following methods and check the status of the issue.

  Method 1:

  Open the hardware and devices troubleshooter.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2:

  Update a hardware driver that is not working properly.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• After that the computer is idle for a few minutes, you receive an error message. "Vtdispl display driver does not work properly, please restart the computer to solve the problem."

  I rebooted and turned power off the computer several times and always get the same message. The size of the text on the screen and the icons are larger than the way in which they should appear. How can I solve this problem?

  Consult the manufacturer of your so great PC OEM, for example Dell / HP or laptop and install the latest drivers.
  If a visit generic PC your graphics card maker or manufacturer of the motherboard and install drivers lates
  Do NOT get the drivers of MSUpdate

• Start Windows - unlock the computer screen - how to change the name that is displayed?

  I have fixed a older laptop.  It works very well.  But at the start, the old owner name appears in user name (no password required).  It is a small irritation but still...  I tried to go under control panel users and I changed administrator to my name, but it has not changed the other name at startup... ideas?  Thank you!

  Hello

  Here's how you can accomplish this:
  a. click on edit accounts in the choice of a task list box.
  b. click the account you want to change.
  c. Select the element you want to change:
  d. click on change the name to change the name that appears on the Welcome to the account screen.

  How to create and configure user accounts in Windows XP
  http://support.Microsoft.com/kb/279783

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I configured the netgear wireless router and works fine but when I turn the computer power off and back on I can't get connection

  Hi can anyone help, I am with AOL, I just switched to the Platinum service, I configured my router netgear DG834G wireless and that's all works fine, but if I turn the computer then turn it back I cannot get a connection and when I ask her to fiind wireless networks the computer tells me that windows does not support my wireless network and I must have another program running , but I didn't so I have to reload the settings again for windows to set it up. What happens whenever I turn off the computer. AOL are without help please someone has any ideas - I use windows xp service pack 3

  Hi Timstimpson,

  It is possible that the Automatic Configuration Windows wireless service is not configured to run at startup.
  Try the following:
  1. click on Start and run
  2. type in the box to run services.msc
  3 scroll down and look for the Automatic Wireless Configuration service
  4. double-click on the service and make sure that the Startup Type is set to Automatic
  
  
  Let me know if it works for you!

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error when you try to start the Medal of Honor Allied Assault: a problem caused blocking the program works correctly. Windows will close the program and notify you if a solution is available.

  Medal of honor allied assault has stopped working?

  This message seems to me when I start the Medal of honor Allied:

  (a problem caused blocking the program works correctly windows will close the program and notify you if a solution is available)

  Hello

  ·         How long have you been experiencing this problem?

  You can reduce hardware acceleration and check if the problem persists:

  1. right click on the desktop and choose personalize.

  2. click on display settings.

  3. in the display settings window, click on advanced settings.

  4. display the Troubleshooting tab.

  5. click on change settings.

  6 reduce hardware acceleration.

  Also try the procedure from the following link: http://windows.microsoft.com/en-US/windows7/Fixing-game-performance-problems

  Also try to check if the game works the clean boot: http://support.microsoft.com/kb/929135

  NOTE: make sure that you start the computer in normal mode after troubleshooting is done

  You can also post your questions on: http://support.ea.com/

• Installation/uninstallation program has stopped working.__A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available.

  I tried to download a program: System Mechanic Professional 9.0 www.Iola.com
  I recorded it on the desktop, right-click to run as administrator, at this stage, it starts to download but the following message comes to the screen: install/uninstall program has stopped working.
  A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available.
  Of course, nothing happens after that and I close the message. I bought this on the internet and I have the activation code. It's good for 3 pc. I put it on my desktop and it works very well. My laptop is Vista Home Premium with 64-bit operating system. Everything else seems to work fine on my laptop but I desperately need this program. Laptop is so slow and Firefox takes forever to open the pages. I get a lot of messages it does not!
  So I appreciate any help you can offer.

  Hi luv2shop,.

  This problem may occur because of the conflict by the present security software on the computer.

  I suggest you try the following steps:

  Step 1: Disable security software, follow the steps mentioned below

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Important: Activate security software once everything is done.

  Step 2: use the Windows Installer Cleanup utility for delete all entries that are related to the product you have installed wrong:

  Download and then install the Microsoft Windows Cleanup utility. To do this, see the Microsoft Web site:

  http://download.Microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1bd/msicuu2.exe

  Save the file to the desktop. When the download is complete, double-click the file and then follow the directions. When the installation is complete, click Start, point to all programsand then click Windows Installer Cleanup.

  In the list of the products installed , delete all entries that are related to the product you have installed wrong. If there are too many entries, click select all, and then click Remove. When you have deleted all entries, click exit, and then start the installation of the product

  Description of the Windows Installer Cleanup utility

  http://support.Microsoft.com/default.aspx/kb/290301

  Step 3: Set the clean boot computer and try to install the program

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7 
  http://support.Microsoft.com/kb/929135

  Important: n ' forget not the computer to start normal follow step 7 in the link.

  If the problem persists, you can check with iolo for known problems

  http://www.iolo.com/customercare/

  Note: Make sure that (double check), you install the right version (32bit\64bit) for your computer.

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot start Windows and "Begin repair of launch" or "Start Windows normally" did not work.

  Original title: need help URGENT

  The normal Windows Vista (Home Premium 32 Bit) updated on my DELL INSPIRON laptop... Cannot start Windows

  'Launch Startup Repair' or 'Start Windows normally' did not work.

  What to do next without deleting my data? Thank you.

  Hello

  1st thing to try is a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  Data recovery, if required

  1. remove the hard drive and it slave in another computer

  2 buy or borrow a USB disk drive hard put in yout case then plug it into another computer and read the hard drive like this

  3. try Knoppix

  http://www.Knopper.NET/Knoppix/index-en.html

  BUT this method depends on your hardware in the computer that failed

• "windows has no start windows on the local computer search... code error 2147218141".

  I had to fix it several times and now does not yet: "windows does not have start windows on the local computer search... code error 2147218141".» I ran sfc/scannow, not received any error.

  Microsoft FixIt couldn't help.

  How can I do this time?

  I tried method 2, but things have just gotten worse.

  I see now 3 new errors:
  1: TL - bootstrap.exe has encountered a problem. I believe that it's associated with my smartphone.
  2: exception processing message c0000013 parameters 75b65f7c 75b65f7c 4 75b65f7c
  3: DrWatson Postmortem Debugger has encountered a problem and needs to close.

  Ugh!

  ------------------------------------------------------------------------------------------------------------------------
  Looks like I found a solution. I found that I still had
  WindowsSearch-KB940157-XP - x 86 - enu.exe in my file of download of one of the (now how many) times past, I had to solve this problem. I did a re-install and it seems that the Outlook and the Office up and running again.

  Phew!

• iTunes has stopped working. A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available

  Original title: the iTunes does not work

  every time I want to launch the iTunes, my computer shows "iTunes has stopped working.  A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available.

  Hi Winston,

  Were there any changes made on the computer before the show?

  I suggest you refer to the article to fix the problems with iTunes:

  iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits unexpectedly, freezes, or launch issues

  http://support.Apple.com/kb/TS1717

  I suggest also refer to the link to support Apple iTunes:

  https://discussions.Apple.com/community/iTunes/itunes_for_windows

• Implement the application has stopped working. A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available. »

  Try to install a CD "the Start-Stop software installation", but whenever I try, I get the following. Implement the application has stopped working. A problem caused the blocking of the program works correctly. Windows will close t he program and notify you if a solution is available. I sent the company and the school several times and have not yet received a response, maybe someone out there could help. Thank you!

  Ok.

  See if they have a patch for it.

  If this isn't the case, you may need to shopping for a similar program.

  Or repost in the Forum of programs on the link I gave you; they can learn more on this subject here.

  See you soon. Mick Murphy - Microsoft partner

• Math (s) program has stopped working. A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available,

  Mathematica, matlab and Powersim all receive the error at startup «empty program stopped working. » A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available. " The programs worked in May when I left for vacation and now they do not work. I tried to uninstall/re-installing all programs - it did not work. Programs opened by operating in safe mode with network. I can't find out whether the problem is caused by a windows update. I can't do a restore of the system to an earlier period of time because the only active restorations are after programs stopped working. Any advice is greatly appreciated!

  Hello

  It seems that the module defective sdb4mdu.dll is the cause of the crash. According to my research, sdb4mdu.dll is a driver printer interface module - which means that it is related to your printer drivers. Assuming that this module belongs to your default printer (which it might not, it is hard to say), disable it would risk instability. I recommend you to run the System File Checker. See this article: http://support.microsoft.com/kb/929833/en-us

  Don't forget to restart your computer after you run it.

  If this does not work, try to uninstall and reinstall the drivers for your printer.

  If it does not either, we can try to turn off the TPM. (first of all, creating a restore point in case something goes wrong)

  I hope this helps!

  Mithrandir

• Windows Update - it gets to the final stage of the update every time it goes to "Starting Windows" and then it all comes back to the update

  Original title: Windows Update keeps reseting

  My computer had a mandatory update that began when turned on. Happens to the last step of the update every time, it goes to the "starting Windows" and then it all comes back to the update. Turn on the computer and then next turn has not changed anything either, and I can't after that.

  Hi Reilly,

  Thank you for the update on that.

  Please follow the steps in method 1, by our Support Engineer Ganesh Achar B replied on 12 February 2015 on the last response.

  If you are able to start the computer in safe mode, take note of the number of KB updates which fails to install.
   

  Also you can restore the system in safe mode.

  Check out the link below to perform a restore of the system.

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  Warning: System Restore affects file system of Windows, programs and registry settings. It can also make changes to scripts, files, batch and other types of executable files created under any user account on your computer. System Restore does not affect personal files, such as e-mail, documents, or photos, so it cannot help you restore a deleted file. If you have backups of your files, you can restore files from a backup.

  Please answer us with the State to proceed to further troubleshooting.

• Media Player error "a problem caused blocking the program works correctly. Windows will close the program and notify you if a solution is available.

  Hello

  Whenever I try to play something or burn something using Media Player, I get a message.  "A problem caused blocking the program works correctly.  Windows will close the program and notify you if a solution is available.

  Help

  Jason

  No worries, go to the start screen and find the Green store icon.  When you open it will let you know if the update is available.

• Trying to update my video player, I clicked on 'file' and then download it and I got was a full window of the computer language without option "run".

  Trying to update my video player, I clicked on 'file' and then download it and I got was a full window of the computer language without option "run".

  To jscher2000 ~ I did what you said and it says "Media player could not be verified for use in Firefox. Proceed with caution. My husband told me to just delete, so I think I'll do it. Thanks for your help! Nice day.