Fingerprint reader does not work on Windows 7 64 bit

T410 and use the latest version 5.9.4.

Can I register my fingerprints and I can slide my finger to get access to the software.  However, when my computer is locked I can't use my fingerprint to unlock the computer.  If I use a finger not enlisted, she'll tell me it failed, but if I use a valid finger, nothing happens.  If I drag with a valid finger hurt, she'll tell me of poor quality.

The previous version of the software was working before.  Having however not lucky with the latest version.

Any ideas?

Thank you

I found a previous version of the software http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/fprx64_593_6264ww.exe

I have he will try tonight.

Edit: 5.9.3 works.

Tags: ThinkPad Notebooks

Similar Questions

  • My fingerprint reader does not work for windows log on


    aiv1bct,

    Please take a look at the following file.

    Find, open, and read the file named: simple instructions for upgrade HP SimplePass

    NOTES

    • Order of events is important, in other words, you must reinstall the driver first and then deal with the software.
    • Version is important - use the latest 6.x version available in the help document.
    • If all else fails, you can try to create an additional administrator account – allows to implement your SimplePass.

    Click on the star of congratulations !

    It's a nice way of saying 'Thank you' for help.

    Although I strive to reflect best practices of HP, I do not work for HP.

  • (SimplePass) fingerprint reader does not work or missing? (Windows 8)

    Hey guys,.

    I see many people running on the issues where he fingerprint reader does not work after the upgrade. Most of these problems come from the books that is not supported by Windows 8.

    If you run a question using biometric (fingerprint reader) missing or does not work to all install IT.
     
     
    THX

    Hope it will be useful.

    THX

  • Fingerprint reader does not work after the laptop awakens from his sleep.

    Pavilion DV6-6c15nr

    Windows 7 Home Premium

    Fingerprint reader works fine when the computer starts. The drive works fine if I manually lock the system. When the computer enters mode "sleep" through inactivity, then wakes up from his sleep, the fingerprint reader does not work. The player power led does not illuminate, the player does nothing if I drag a registered fingerprint. I must select use authentication information and enter the Windows password. Device Manager says device working properly but it doesn't help. I checked for BIOS, Windows and driver updates but I run in all aspects.

    Hello

    Uninstall the software and current driver for the fingerprint reader.

    Resources:
    Uninstall software in Windows 7

    Uninstall or change a program in Windows 7

    Download and install the latest driver from here.

    Download and install the latest version of the software from here.

  • U2413 SD card reader does not work with Windows 8.1

    My SD card reader does not work with Windows 8.1. There is no problem with the USB ports. Anyone else with problems?

    I have the same problem here too.

    The driver above does not work.

  • I just dug my copy of train simulator, and it does not work on Windows 7 64-bit. Ideas please

    I just dug my copy of train simulator, and it does not work on Windows 7 64-bit. Ideas please

    Thank you very much for all your suggestions. "Iwent with."

    This can help with some (but not all the) programs/drivers:

    (1) uninstall the program, if it is already installed. Then when install you / reinstall instead of double click on the Setup file, right click and select 'resolve compatibility issues.

    (2) then click on 'Try recommended settings' and in the next window, click on "Start the Program" to install it.

    (3) after he set up see if it works properly. Note: some programs may not be able to run in Windows 7.

    and it worked.

    did anyone tried the version updated? I read some rather disappointing reveiws.

    Once again my kind thanks for all your suggestions

  • Satellite A210 (PSAEG) - Microphone does not work on Windows 7 64 bit

    Hello, the microphone does not work on windows 7 64-bit, the driver that I use is 64-bit Windows Vsta. The volume is implemented maximum and so is the amplification but no way to make it work with the software assistant camera Skype or toshiba.
    Can someone help me?

    Thank you

    Hi Largo09,

    Usually, you need to install the webcam driver and sound to get the microphone working. The microphone is a part of webcam

    As you wrote, Satellite A210 is not Windows 7 64 bit supported, so the only option you have the Vista 64 bit drivers

    In my opinion, you should check if the Microphone is turned on in Windows audio settings. There you can also activate the Microphone Amplifier, which can increase the volume of the microphone.

  • My on-screen keyboard does not work on Windows 7-32 bit...

    My on-screen keyboard does not work on Windows 7-32 bit...

    It displays error "could not start on-screen keyboard.

    Please help me and tell what to do...

    Hello

    • It worked before?

    I suggest you follow the methods that can help you reslove the problem below.

    Method 1:

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

    http://support.Microsoft.com/kb/929833

    Method 2: You can also try to disable and enable the on-screen keyboard and check if it works well or not. So follow the steps:

    1. Press the Win + U keys together to launch the accessibility.
    2. Then click on "Use the computer without a mouse or keyboard" (probably the 3rd option in the list).
    3. Then on the next page, uncheck the box that says "use on-screen keyboard.
    Method 3:

    If this does not work, create a new user account and check. If it works in a new user account, then probably your user account have been damaged and would need a fix.

    Create a user profile

    http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

    Now search for the question.

    Follow the link provided below to fix the damaged user profile.

    http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

    It will be useful. Let us know for help.

    Kind regards

    Ramata Thakur.

  • Cisco Anyconnect VPN does not work in windows 7 64 bit

    Hello
    I found that the cisco anyconnect (version 3, any series) does not work in windows 7 (64-bit).
    The vpn is connected, but there is not any internet access.

    I tried to solve the problems of:

    -Disabling the firewall.

    -disable the anti-virus etc.

    But while I tried using with 32 bit, it works very well.

    Also, I found that there is not a specific version of anyconnect vpn for only 64-bit.

    Do any body have the idea how to solve this problem, either it's a bug of cisco vpn itself?

    Certainly, you just need to install a later version of AnyConnect.  You need a Cisco, for example a SmartNet maintenance contract, to download the new versions.

  • DV7-4073nr - fingerprint reader does not work after the upgrade to HP Support Assistant

    Hello

    I have a problem right now. The HP support assistant suggested that I had to upgrade the software of fingerprints to be upgraded and I did it without delay. Restart, the drive does not work. Windows 7 says it's a bad data. no password HP does. What should I do?

    Turn the computer off, and then once you turn on, keep the F8 key several times to load the "Windows Advanced startup options" screen. In this screen either select mode safety/Safe mode with networking and log in to your user account by entering the password manually.

    Once that is done, do a restore of the system through the control panel and restore your computer to an earlier date, whenever it was working fine. Once the restore process is done, change the settings for HP Support Assistant auto do not install updates

  • My built-in memory SD card reader does not work on Windows 8

    I installed Windows 8 on my new Acer AspireOne AO756 and the SD card reader does not work. I looked for some drivers and drivers Acer only give x 64 for Windows 8, but I only have x 32.  Everyone knows about this problem, and if so how to solve? Thank you

    Hello

    I understand that the casting of card reader does not work on your laptop.

    1. you get any error message?
    2 have you tried with different memory cards?

    I suggest you follow the steps mentioned below and check if it helps.

    Method 1:

    You can try to run the hardware and devices Troubleshooter and check if it helps.
    a. press the Windows key + R, type Control Panel.
    b. type troubleshooting in the search bar, click Troubleshooting.
    c. click on hardware and sound, click hardware and devices.
    d. follow the steps in the wizard to run the troubleshooter.

    Method 2:

    You can download the driver for the reader from the link below and install it in compatibility mode.

    http://Acer.supportscentre.com/driver-of-Acer-Aspire-one-ao756-Windows-7-32-bit.html

    You can follow the link given below to install the driver in compatibility mode.

    What is program compatibility?

    http://Windows.Microsoft.com/en-us/Windows-8/what-program-compatibility

    Make the programs more compatible with this version of Windows

    http://Windows.Microsoft.com/en-us/Windows-8/older-programs-compatible-version-Windows

    Hope the helps of information. If you have questions related to Windows, please do not hesitate to post, we will be happy to help.

  • X1CT - fingerprint reader does not work

    Hi all

    The reader of fingerprints on my X1CT does not work. When I ran Lenovo Fingerprint Software, I got an error message with the error code "E7210001." Someone knows how to fix this?

    Thank you.

    Best,

    Ahn

    Thank you very much for your message.

    Windows ran just automatically being updated, and then the device of the fingerprints came back to life. I did nothing special.

  • HP Envy dv6 7323 CL: my fingerprint reader does not work

    My fingerprint reader has stopped working.  It is a validity sensors (WBF) (PID = 0018). It worked once I updated to Windows 10 but has stopped now. I opened the Device Manager, the device was hidden, and when I tried to update the drivers of the update of the driver indicates that all the drivers are current, this is checked when I open the 'Détails' tab and go to the section selected user driver installed (). I then checked the "General tab" which had the following message now, "this hardware device is not connected to the computer. (Code 45); To resolve this problem, reconnect this hardware device to the computer. "Then I checked under"location information"that are listed as port #0003. Hub_ #0001. Additinally, verifying the Universal Serial Bus controllers it lists a device with the following message, "unknown USB Device (device descriptor request Failed)."  Under details, I noticed the following: location information is port #0003. Hub_ #0001. The problem code is 0000002B. On the tab "Général" is the message "Windows has stopped this device because it has reported problems. (Code 43) »

    Hello @Skipnielsen,

    Thank you for visiting the HP Forums! A place where you can find solutions for your problems, with the help of the community!

    I read your post on the fingerprint reader and wanted to help you!

    Try uninstalling the driver and let the search system for a compatible driver.  If you still have problems, try to review the following document and let me know if this can help:

    HP Notebook PC - a (Windows 8) fingerprint reader troubleshooting

    Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

    Have a great day!

  • Shaker movie 3.1 does not work with Windows 7 64 bit

    I have a DCR - IP5 camcorder and shaker movie 3.1 does not work with the 64 bit version of Windows 7. Is it possible to make it work.


  • Xerox workcentre ss16 does not work with windows 7 64-bit version

    According to Microsoft the xerox workcentre pe16 works perfectly with windows 7 64-bit version (see link http://www.microsoft.com/windows/compatibility/windows-7/en-us/Details.aspx?type=Hardware&p=Xerox%20WorkCentre%20PE16%20All-in-One%20Printer&v=Xerox&uid=PE16&pf=1&pi=5&c=Printers%20%26%20Scanners&sc=Multifunction&os=64-bit)

    However, in reality, it doesn't work and I can't find a driver. what Miss me?

    THX.

    If use you Windows Update, it will install a printer driver, but the scanner does not work, Xerox has not yet developed a driver for Windows 7 for this printer/scanner. The latest driver is for Windows Vista since 2008. I hope they won't disappoint us and come up with some appropriate support of Windows 7. If anyone has a work around to install the scanner, I'm all ears.

Maybe you are looking for

  • Important not all VCF contacts

    I had a timing problem, where almost every card has been duplicated, but all data; for example, for two cards, one would not be complete, but the other lacks State or, say, data from LinkedIn. I went through over 2,000 maps and fixed them. I exported

  • Is there an equivalent to press a hashing key when asked to do so during the phone call on Apple Watch?

    Is there an equivalent to press a hashing key when talking about Apple Watch phone app. ? I tried to leave messages on the voicemail of the recipient but to end leave my message, I wonder to press the pound key, which I can't do the watch.  I tried p

  • Update the BIOS from the corrupted file Satellite R830

    Hi all I tried to download the update to the newest BIOS for the model R830, but I find myself with a corrupted zip file each time: http://Support1.toshiba-tro.de/Tedd-files2/0/BIOS-20110908125815.zip Does anyone else have this problem?Any person who

  • Voice modem on Satellite A100-787 PSAANE-02Q01LAR

    I tried to install a software of voicemail as an answering machine for a telephone line but noticed that my computer does not support this function. If the hardware is missing or it is possible that the software on the modem is not installed correctl

  • T510 factory reset question

    Windows 7 64 bit on my T510 is dead. When you connect, it hangs on the forever login screen. Windows Recovery failed too. It lasted eight hours and reported an error (something like error to restore a file and the disk is full, although my C drive is