Fingerprint sensor satellite A100-912 does not correctly when the AC is connected

Similar Questions

• Satellite P205: Touchpad does not work when the new adapter is connected

  I got a replacement charger for my Satellite P205 but put it has A 4.19 instead of 3. 95 has, they said that it didn't matter, but since I use the charger, I have the following problems:

  -Does not load properly and turns off after an hour.
  -The touchpad has a mind of its own when the charger is connected (windows opens if hovering over button, through the screan jumps when I try to move it, freezes and disappears)
  -Charger Word to say the laptop plugged in but not charging

  What can I do to remedy these problems, the laptop works perfectly when the charger is not plugged in?

  See you soon!

  Hello

  I guess that the touchpad worked correctly in the past with the former sector adapter.
  Is this good?

  Well, it seems that these questions are related to the new power adapter and I would recommend using a 100% compatible adapter.

  Check the AC adapter s old part number and if the issues could be resolved using this adapter.

• ITunes does not recognize when the Ipod is connected. Help

  I have an ipod classic and only recently (Christmas 2015 day) itunes has ceased to recognize when my ipod is connected to my laptop. However, I know I tried three cables work because the ipod screen shows that it is connected and my laptop opens the file for my ipod, but this does not add to the music on it. How can I my itunes to work again?

  Thank you.

  

  It's what charge my laptop when I connect my ipod instead of loading of itunes.

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• Satellite A100-912 - does not start

  Hi all...

  I have a big problem... After that I open my Toshiba, everything worked well. Purpose to disassemble my phone was reset CMOS password and that went well. While it was open, computer was working fine but after a while, maybe five minutes, computer start making some problems on my head :)

  Now I see that after I press POWER / TURN on the computer begins to power, cooler is spining, it attempts to boot from the DVD - ROM, but there is no image on the screen, even when I connect it to the external display. I did not do anything with GPU, it should be OK.
  Is there maybe some types of "mine" or how to say, something that must be pressed which should work ok once again before start?

  PLEASE HELP ME

  Hello!

  Why did you disassemble your laptop?

  However, check if the RAM is placed correctly in the slot and put the new one.

  Try to remove the battery and the AC adapter, wait up to 1 hour and then connect the battery and AC adapter. Try restarting the laptop.

  In the worst case, there is something wrong with the motherboard and it should be replaced. :(

  Good bye

• Satellite A100 PSAA9C does not work without the battery inside

  I'm having a strange problem with a laptop Satellite A100 (PSAA9C-SK900E).

  The machine will not work without the battery in it. If the power supply is connected in the machine and the wall, it will power without the battery installed. If I install the battery, let it load completely (battery LED goes from orange to blue and the plug LED is blue) then start the machine it will work for a period of time (more than an hour depending on what I'm doing) then suddenly turns off.

  If I restart the machine, it will work for a very short period (sometimes only for a few minutes) just before going off.

  If I do this a couple times, the machine will be not even by post before turning off.
  If I let the machine to recharge, it runs for a while and then do the same thing after using it for a while.
  If the battery is pooched, which is fine with me. How to operate with only the power supply of the machine?

  As I type this I'm suspecting that the adapter cannot be taken out the required voltage/amperage. (adapter is not still hot when charging, are my other laptops) Any suggestions would be greatly appreciated.

  Thank you.

  Hello

  If I understand your assignment, the laptop does not power up without the battery
  But it will light if the battery is connected.

  The question is; Is the power led on if the AC adapter is plugged?
  If this isn't the case, then it means that the power adapter is faulty and so the laptop cannot be turned on by using only the AC adapter.

  I think you should test a new adapter. Maybe it helps!

• Satellite A660-186 does not start when the USB nano-receiver is connected

  Recently I bought a mouse a4tech g7-750 with the nano-receiver into usb port plug.
  After the nano-receiver is inserted into the USB before lighting, computer laptop does not start.

  Only the cursor is displayed, so that it is displayed before the screen with the ability to enter the F2 BIOS or select the F12 boot device.
  Without the nano-receiver laptop runs without problem.

  Any advice?

  Thank you much in advance.

  Hello

  During the POST (power on self-test) all parts laptop as RAM, motherboard (also of connected devices) is enabled.
  If a problem (compatibility problems, etc.) would be detected during POST, then the laptop would not initialize correctly.

  This mouse nano-receiver is unknown to me and I m not very well what s wrong with this unit, but I doubt that this problem is related to the laptop.
  I guess that the laptop starts properly with other devices connected to the laptop. right? Well well, in such cases, there s no question cell phone but the 3rd unit affect the functionality of the laptop.

• Satellite A30 161 does not work when the battery is installed

  Hello

  I have a problem with my Satellite A30-161. The laptop works perfectly without the battery installed. With the battery installed and the AC adapter plugged the power supply and battery (light orange) are turned on.

  When turn on/off, as soon as WXP loaded the battery light turns off and the laptop turns off. With battery only laptop does not start. There is no dirt on the heat sink and it doesn't seem to be a problem with the connector DC and power lights still on.

  Any ideas?

  Hello

  This behavior is not easy to give an accurate diagnosis, but according to your description, I assume that there is a problem of electronic power supply. Just using special diagnostic tool, it is possible to check if there is a problem serious.

  To be honest, I don't think you can do it alone. The only thing you can try is to test it with new battery. Maybe you should contact the service authorized in your country. talk with them and you will see what they say.

• Satellite A120: Microphone does not work when the power cable is unplugged

  I have a Toshiba Satellite Pro A120, which has just begun to play up...

  I regularly record music of my DJ Mixer in microphone of my laptop entry, recording in Adobe Audition.

  Because the power supply makes a buzzing sound, I can't register with the power cable plugged... If I always record with the unplugged power cable, running off battery.

  I've never had any problems before, but what has caused the problem, I now, was earlier the battery ran out while recording, put the laptop into hibernation mode.

  Since then, I can't register with the power cable disconnected. He recorded only with the cable - which is not a good cause snoring.

  It is not a problem with hearing, because in Windows Vista its implemented the problem proved too. As soon as I unplug the power cable, microphone disappears from view.

  I used to work in IT support, so I'm not a technophobe - but I can't for the life of me works why it would suddenly start to occur, power is not related to the entrance it is micro... !

  One of you lovely people have ideas? I checked power options and the Device Manager to see if theres no hardware issues, but there isn't.

  I also reinstalled my sound card drivers.

  It's strange. I guess you tried a boot cold fresh. Hibernation can sometimes cause problems with the devices.

  Try to update the BIOS.

  If all else fails, you may need to reinstall Windows. (Backup your data and run recovery by holding down the button reset during power on)

• Microphone does not work when the headset is connected (Windows 7 with Realtek HD Audio).

  I am a user in advance, but this got to be one of the funniest problems ever. First, I had 2 headphones with microphone.

  1. An old helmet specified with microphone
  2. A new headphones A4Tech HS-100 with microphone that I just bought

  Problem:

  • Using the new helmet I bought, when I plug the microphone (pink jack even) it works, but also when I plug in the headphones (same headphone jack), the microphone no longer works (cannot receive all the sounds, even if it is detected clear as already plugged) and only the work of helmet.

  The most funny thing is:

  • The old headset works fine when I plug the microphone (jack Pink) and headphones (headphones) to my ASUS N81V laptop.
  • When I plug the microphone on my laptop and plug the headphones to my iphone, the microphone and the headphones work!
  • To experiment more, my laptop has a HDMI output connected to an external HDMI monitor, when I connect the microphone on my laptop, only it works, but as soon as I connect the headphones to the headphone jack on the external HDMI monitor, the microphone works again!

  Things, I tried and does not work:

  • Maximize the microphone amp
  • Separate entry made in the audio Panel
  • Ensure the microphone is not dumb anywhere
  • Install the latest drivers from the manufacturer and realtek Web sites

  I want to get both my mic and headphones works when plugged the laptop, what exactly is the problem? Any help? Thank you very much.

  I have a similar problem with my netbook a built-in microphone running Windows Starter, that's how mine to get the fix:

  Control Panel - his - recording tab - click on Configure button - set up micro - Configuration of the Microphone Wizard.

  You'll see three choices 1. Headphones Microphone 2. Table microphone 3. Others.

  All what I have to do to fix my netbook is to select the desktop instead of headphones with Microphone Microphone (it has been revived somehow).

• No sound from speaker, but sound does not return when the headphones are connected

  I have an Acer ASpire V3 - 572G
  When I unplugged my headphones don't switch on my speakers. When I reconnected my headphone the sound returned ony through the headphones.

  Things Ive tried
  Checked in the playback devices to see if the speakers have been checked as audio by default
  Reinstalled and updated my Realtek Audio drivers.

  Was finally able to get the sound back to my speakers. Seems it was my audio jack, sensing that something was plugged when none existed.

  I'm a Manager DD Realtek Audio and messed with the retasking speaker options. With the help of user help? "s solution and audio in my speakers briefly returned." Then went away.

  So I turned off my laptop has had little compressed air and a toothpick and went slightly on the edges of the socket. Transformed sound and return on return.

• Satellite A100-383 does not - the battery is not

  Hi all

  I own a satellite A100-383 (PSAARE) that does not start when the battery is totally empty, or if I leave without the battery of the day to the next. The battery will charge not façade is and all the lights are off. I should always have a load on my battery and don't let not unplugged more than 2 days.

  If for some reason, my battery was completely empty, Plug and unplug the power supply from the wall outlet would make all the lights increase and charge the battery again.

  Unfortunately, I went on vacation and I forgot my pc unplugged and it does not charge or turn on. ? The headlights are off. Tried my dear old method to connect the unit several times with battery and without it with no luck... I could see a connection for a second or two, but I wasn't fast enough to plug in and they are off.

  I would be so grateful to you all if you give me a help to put it on my pc. Once I have it on the load and back I'll buy a new battery for sure.

  I look forward to reading your advice.

  Thank you all in advance!

  Post edited by: Soneu
  The battery will charge not façade is and all the lights are off, when the battery is completely empty.

  Post edited by: Soneu
  Running Windows 7 32

  Thanks for the comments. I just want to say that you should buy high quality and Toshiba of origin of the product and not a cheap no. product name.

  Good luck.

• I have an index page that does not correctly load the css and css works on all other pages of the site.

  http://www.boulderridgecondos.com/ does not correctly load the css, but all other pages of the site loading the css correctly. There is nothing (that I can identify) between pages.
  http://www.boulderridgecondos.com/news.htm

  I guess something is wrong in the css, I inherited this site and have exceeded the css but can't find a problem that would cause this to happen.

  Any help or suggestion looking for something would be appreciated.

  This page is saved in UTF-16 format (Content-Type: text/html (UTF-16 BOM, litte-endian)) in your text editor. The CSS file is sent as ISO-8859-1. Firefox fun to see all the files in the same encoding. The other pages are send as ISO-8859-1 and so use the CSS file. You will need to re - save this page as ISO-8859-1 and download the corrected version.

• Acer site does not correctly display the specification.

  Acer site does not correctly display the specification.

  Example when you click on the link on M5 Explorer - 581 T-6405 please as to the specification of the model of S7-191-6447. Please check

  Thank you bring to our attention. We will ensure that it is transmitted.

• Satellite Pro L20: battery not charge when the power adapter is connected

  Hello

  all advice appreciated.

  I had a Satellite Pro L20 for about 18 months. Recently, battery does not charge when the power adapter is connected. The battery light starts yellow (which means more liberated, I think?), then will both green, the machine sat for awhile. However the ACPI often said that AC is "offline."

  There are two recent occurrences that coincide with this problem, I try to eliminate:

  1. my friends rat chewed by the feeder for pets! Power is Mobile OK insofar as he fled sector - the rat seems to have simply chewed by the outer cover (I see some threads, but I think that is just a shield, although I'm not an electrician).

  2. I put the laptop in hibernation for the first time. That seemed to mess up the system a bit, which was what initially drew my attention to the problem. This question is a bit complicated because I'm under Linux (Xubuntu).

  I updated the drivers etc from windows when I bought the laptop. Never had any problems until now and have been running linux for centuries. Also, I have mainly the laptop the power supply turned off, but do not remove the battery (is that really a problem these days?)

  I obviously need to replace the adapter, but is - it is likely (and how I can check) that the battery was borked until?

  see you soon
  Chris

  First, please check if the other are lit.
  If the AC led and power led are on the adapter sector is ok and it provides the power to the laptop.

  > The battery light starts yellow (which means more liberated, I think?), then will both green, the machine sat for awhile
  If the battery LED is yellow, this means that the battery is not fully charged and if the Green led changes then recharging is caught and the battery has been recharged.

  So I really don t see any problems with the charge process.

  Maybe the battery is old and so you cannot use it for an extended in such a case only the replacement of the battery could help.

• While the loop does not stop when the two values are equal using equal to comparitor

  Hello world

  I have a really, really strange bug. I have a LabVIEW VI that change a chain on a power supply. I have a start and a stop voltage and use a while loop to increment the device. For example if I want to scan from 1, 2V to 2.2 V in 0.2 V incremements, the program will end when "The current tension" = "stop the tension." And it works very well!

  However, when I start - 3 V and want to stop to say-0.8 (new in 0.2 V incremements) the program does not stop when "The current tension" = "stop the tension." I checked with the probe close to what should be the end of the race and - 0.8 V goes both of the entries ' equal to ' comaprison operator, but that his can't trigger a real result.

  It's very strange for me. Espeically as if I'm going - 0.8 V to-2 V but decrement of-0.2 V, the program stops correctly!

  I am very confused!

  See you soon!

  Search on: comparison of floating-point numbers

  The second thread is particularly relevant. This discussion was 2009, but you can find that the same "bug" being reported to enter the end of the 1980s.

  Mike...