Firefoox isn't work welll with Windows 10

Similar Questions

• RoboForm does not work with your new browser. It is very fustrating and works only with Windows Explorer. I need to reinstall the old FIREFOX program?

  RoboForm does not work with your new browser. It is very fustrating and works only with Windows Explorer. I need to reinstall the old FIREFOX program?

  RoboForm has already released a version with support for the latest version of Firefox. See http://www.roboform.com/support/news. Try upgrading to the latest version of Roboform.

• How do I know if a site Web Builder software work well with Windows

  I create websites in My spare time for a little extra income I wanted to know how do I know if a software will be safe and work Weel with Windows.i ask because I am thinking to buy a new one from the site Builder that's Coming Out and the last thing I need is a computer crashing here is the software in Question self build product review can someone tell a way to ensure that its windows compatible? and if not how to know? Thank you

  You'd better post this question in the Forum of Windows answers to the following address

  http://answers.Microsoft.com/en-us/Windows

  In any case, for compatibility with Windows 7, you can use the Windows 7 Compatibility Center website at the following address

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Good bye.

• SENTINEL HASP KEYS 3.25 WORKS ONLY WITH WINDOWS 7

  I lived several of these posts here about the hasp and windows keys 7 and I tried many suggested fixes, but nothing works. I installed the software using Windows XP Mode in Virtual PC, I've updated, uninstalled drivers, reinstalled with and without the hasp key inserted. I use the Sigmanest V4, Mastercam9, and Mastercam10 software. All three of these programs worked fine with Windows XP service Pack 3. I did everything that I mentioned above and some of which you try to run the software in compatibility mode. Nothing I try works, Sigmanest software seems like it is recognizing the hasp key because it will be open, but it will not open in demo mode. The two programs Mastercam do not even recognize the hasp key. They open up and say that there is no present hasp key, then close. After years that Windows 7 has been out someone got a solution for this. Maybe they have, but I can't?

  Hello Chad,

  Thanks for posting your query on Microsoft Community forum.

  According to the description of your problem, it seems that you are trying to install the drivers for the Sentinel 3.25 HASP key. I checked the official site, it shows drivers for Windows, but did not mention the version of Windows.

  Here is the link: http://sentinelcustomer.safenet-inc.com/sentineldownloads/?s=&c=End+User&p=HASP+HL&o=Windows&t=Runtime+%26+Device+Driver&l=all#.

  I also checked this device and software Center of Microsoft Compatibility, and I couldn't find any information out there in that regard. So I suggest you to contact technical support SENITEL for troubleshooting further because they are the best people who can say that this device is compatible with Windows 7 or not.

  Hope this information is useful. Do get back to us after contacting them and please update your question on the forum.

  Thank you.

• Glarys works best with Windows 7

  Glarys utilities works better with Windows 7?  It's the only one I am using since end of 2013! I have most of Windows security.

  http://support.Microsoft.com/kb/2563254

  See the following compliments of quietman7 MS MVP: why you should not use the optimization tools and registry cleaners

• Canon S820Printer my printer was working fine with Windows 7 Home Edition, then it stopped, magenta and yellow print. Ink tanks are full.

  My printer was working fine with Windows 7 Home Edition, then it stopped, magenta and yellow print.  Ink tanks are full.  What bad past and how to fix it?

  If you are sure that the ink cartridges are full, then try to re-seats and cleaning the heads - http://kbsupport.cusa.canon.com/system/selfservice.controller?CONFIGURATION=1011&PARTITION_ID=1&secureFlag=false&TIMEZONE_OFFSET=&CMD=VIEW_ARTICLE&ARTICLE_ID=8783

  - http://kbsupport.cusa.canon.com/system/selfservice.controller?CONFIGURATION=1011&PARTITION_ID=1&secureFlag=false&TIMEZONE_OFFSET=&CMD=VIEW_ARTICLE&ARTICLE_ID=8844
  If all goes well.

• How can I make my Saitek X 52 Pro USB flight game controller work propperly with Windows 7?

  How can I make my Saitek X 52 Pro USB flight game controller work propperly with Windows 7?

  I'm sure I installed the correct drivers and software, but when I press a button on the X 52 flight control freezes (for example in FSX).

  Kind regards

  Niels

  Hello

  Have you downloaded the drivers from this link in the last answer?
  Click on this link and make sure you have your version of Windows 7 selected; 32-bit or 64-bit.
  Then there will be the hyperlink that says "free download required.
  Click on that and install the drivers for this device.

• HP cp1700 printer works only with Windows 8

  My HP cp1700 printer no longer works with Windows 8, but worked well with Windows 7. It is visible in printers and faxes, but displays always 'offline '. This utility is not correct the problem and I could not find any solution working on the forum. HP support reminds me of Windows drivers, which are installed. I uninstalled and reinstalled the printer with hard boots but I have always the same question. Any ideas?

  Problem solved with the driver HP CP1700 for Windows 8

  1 module printer via a usb cable to your pc

  2 turn on your printer and let windows to install the printer

  3. go to control panel of configuration, devices and printers, and locate the hp cp1700

  4. right click, properties, hardware, again, then click on to the left of the change settings tab

  5. on the driver tab, click roll-back of driver which previous version of 2012 at the 2006 pilot

  6 follow steps 3 and click on put updated driver and click search automatically and the winows 8 will find for the driver you on the internet and you will have all the features that have been installed for your printer in the end.

  Hope you enjoy this :)))

• Flash CS4 works only with Windows 7 64-bit and Kaspersky Internet Security

  I have a new computer to core i5 Windows 7 64 bit retail. With Kaspersky Internet Security 2010 installed Flash CS4 answers so that it is completely unusable. Uninstall KIS and it works quite well. I already read on another forum that someone of another encounter the same problem with the same combination of products. Does anyone else have this problem amd If Yes, how do you solve? I posted on the forum of Kaspersky without solution so far.

  Norton works OK with Windows 7 (64) and CS4?

  Your chance.  After a week of research I found someone who has thought about it.  Apparently his self-defense of Kaspersky which is causing the problem.  Under options disable control external sevice disable.  For me, that did the trick.  If it does not for you also try to disable self-defense under both options.  Once I did it was moving smooth again.

• NB100 3 G Ericsson F3507g works only with Windows 7

  I did everything and I can't get it to work under Windows 7, although it works on Windows XP.
  I already updated the firmware of the modem to the last R1D06 (I had to downgrade to XP to do it, because in windows 7, program reviews "No module" find.)
  I installed the latest drivers for win 7 32 Toshiba, as well as the latest Wireless Manager (R2V2)
  What is happening is as follows. I start Wireless Manager, and request the SIM PIN code. After I insert the code PIN SIM "success" icon appears. After a few seconds of this 'Success' icon the icon "the mobile broadband device is not found" is displayed briefly and then the animation "initializing the device mobile brodband" appears... After the PIN code request page back... If I insert the PIN again once I have the same story...
  Can someone please help me, because it's driving me crazy?
  Thank you.
  Manuel Quinaz

  Hey Buddy,

  This really strange story... I tested the modem 3G with Windows 7 and the drivers of Toshiba page. In my case it works correctly, I have problems.
  The only problem I've had is that the SIM card was not recognized, but the solution was a simple reboot.

  You have another SIM card that you can test? The SIM isn't working properly and to test another might be worth a try. ;)

• integrated cam works only with Windows 7

  I did every possible thing but I always stuck with the same problem

  Hi sherry WAM.

  You'll want to go to the website of the manufacturer of your system to get the latest drivers for Windows 7.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Re: Toshiba Store Alu 3.5 "1 TB HARD drive works only with Windows 2008 64-bit

  Just bought this as a backup device for Small Business Server 2008 running on Windows 2008 64-bit. However it does not? Are there drivers anywhere for this or it is simply not supported and I need to buy an alternative solution?

  Plugged into my laptop Windows 7 64 bit and no problems.

  Someone else had the same problem?

  Hello

  Unfortunately, there is no other software by download.
  I checked the driver page Toshiba in the Options area but didn't find anything

  AFAIK it of a plug & play HARD drive if you n t need any software to recognize the HARD drive

  There may be a password.
  Try this:
  Connect your HARD drive to the computer when the HARD drive is working
  Select the CD drive with your browser (password)
  Run the ONSPCLCK.exe
  Select 'Options '.
  Select "Disable security password"
  Enter your current password
  Unplug the HARD drive
  connect the HARD drive

  Now, it will work, but with no password protection. Perhaps it would work

• (E1P43AV) HP Pavilion 17 Notebook can work well with Windows?

  I want to use laptop with windows 7 because I have software that is not supported in Windows 8 AT ALL! I just also dispise Windows 8 and wish to return to the real world in the land of happy Windows 7 where do everything presence and is where I left it. I can't return this laptop apparently ill try to make it work, but before I do, I want to ask the world or even HP SUPPORT themselves and whether someone had a bit of luck this improve lappy by switching to windows 7.

  Thank you!

  Hi SwaggaSamurai,

  Thank you for visiting the Forums HP's Support and welcome. I read your thread on your HP Pavilion Notebook 17z-e100 and wanting to downgrade to Windows 7. The hardest part might be some of the drivers. You have a copy of Windows 7 Professional? All the drivers can be found by doing a Google search. If you need help with drivers, I'd be happy to help you. Here is a document on Windows downgrade rights. I recommend to read this document and save all documents before you start, just so that you don't miss something important.

  Please let me know.

  Thank you.

• On Satellite A200 (PSAE6E) FN key works only with Windows XP Home edition

  Hello

  I just get my Toshiba Satellite A200-2BH, (PSAE6E), included with windows Vista. I'm not comfortable with that OS so I formatted the hard drive and install win XP pro SP3 all seem to be fine with the driver downloaded from driver support Toshiba on the line, but the FN key do not work in certain combinations, for example:
  FN + F5 or + F6 or + F7 do not work
  someone say online in this forum that I should install updated BIOS, but this note on the Toshiba support website me resist:

  * "This Bios update adds functionality to your system *."
  * This Bios is NOT compatible for notebook computers equipped with Windows Vista! "*

  What should I do?
  My current setup is:
  Satellite A200 PSAE6E with WXP PRO SP3 with the FN key does not
  Should I install this update to fix this problem?

  Please help me with the path I should follow
  Thank you very much

  FN feature under Windows XP Home edition is supported with the latest version of the BIOS update. So don't be afraid. Download the right BIOS update and update Windows XP Home edition.
  Before start you BIOS updated to close all running applications and make sure that the laptop is connected to the power supply do not do this with battery power!

• Pavilion laptop: SD card reader works only with windows 10

  The SD card reader does not work after installing windows 10. I contacted Microsoft... they fixed other issues but said HP drivers needed to be updated to read SD cards.  Help, please. I am a professional photographer and NEED to use SD cards!

  Hello:

  What is the number of full model of your laptop?

  So most of the new laptops pavilion equipped with a Realtek card reader, try the first driver on the list from the link below.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=15&PFID=25&level=4&Conn=3&DownTypeID=3&GETDOWN=false