Firefox 4.0 than flash menus as a key on the keyboard is pressed. Can not access even with all the plugins turned off. Same issue on multiple machines with different versions of Windows. How this can be solved?

Similar Questions

• I want to connect to a network printer hp cp1518ni with different versions of windows (win7 & winxp)

  I want to connect to a network printer hp cp1518ni with different versions of windows (win7 & winxp). My pc with win 7 work ok, but the pc with win xp not 'see' the printer on the network. What is the additional driver should I install?

  Thank you

  Hi @OHIMATAS,

  I see by your post that you are unable to network that is connected the printer to the Windows XP computer, but Windows 7 computer. I can help you with this.

  Make sure that the Windows XP computer is connected to the correct network name, not a guest or the other network.

  Print a configuration page to get the IP address of the printer.

  Print a Configuration Page.

  Try and access the printer on the Windows XP Embedded Web server.

  Type the IP address in the address bar of your web browser. (Internet Explorer)

  It loads the page Web has?

  If you are unable to access SAP of the printer, check the IP address on the computer to see if the first 3 sets of numbers match the printer IP. They must match to be on the same network.

  Go to start, type executer run in the start search box, type cmd, and then type ipconfig.
  Check the IPV4 address.
  Now, check the IPV4 address for the printer.
  Do the first 3 sets of numbers match?

  Try and ping the printer.

  In the same window, type ping printers (space between ping and IP address) IP address
  What are the results?

  Run the Wizard add printer in printers and faxes, if you were able to access EWS of the printer.

  Please provide detailed results if you're still having problems.

  Good day!
  Thank you.

• File sharing between two computers with DIFFERENT Versions of Windows (XP & Vista)

  I just bought a WRT54G4 Wireless-G router broadbad & am a n00bie to this any thng in network.  I like the current state of things now, all considering that both my desktop PC (Windows XP Home Edition) & my laptop wireless PC (Windows Vista Home Premium) are online (local & Internet) BUT I can't seem to get things while my desktop PC sharing files which can then be read and otherwise accessible by the laptop.

  Here's what I'm trying to...

  * Have BOTH computers access the Internet via a private network (which I already managed to do)

  * Having the Office to share files that are accessible (wireless or not) from my laptop

  Essentially, I want to be able to use the TWO HDs according to needs.

  My office is an old computer AMD Duron 1 Ghz. with 512 MB RAM & can handle a FEW small spots, but the big gun is my laptop (A 1.86 Ghz. Intel Pentium with 3 GB of RAM). Because of his speed & memory, I would like to have the laptop handle larger & more intensive tasks.

  Although my laptop has a smaller hard drive compared to my office (A 136 GB HD in the office (200 GB) compared to a 141 GB (I guess this HD is around this size, but since it came pre-installed, & I am currently leasing to buy, I don't know), I would like to be able to use if possible of the TWO HDs.)  All I need is for both computers see the two HDs & all the files on it.

  I tried implementing the sharing of files, as shown elsewhere on the Linksys site, but he lost when I rebooted both my computers, since that's what the page told me to do (I followed Windows XP as the Office has all the files that I want to share & Windows XP is the operating system of the desktop).  Should I have not done this?

  In addition, my ultimate goal is to GET RID of the big bulky monitor I connected to the back end of my desktop PC & all simply use the laptop instead, because it does not take a lot of desktop space.  Y at - it an emulator "Virtual monitor" or software of some sort that I can download (for FREE please ) that will allow me to see the jobs of all the computers on my network, just as if I

  had REAL monitors?  If so, where could I find one?

  In short, together, I have accomplished a lot lately since I bought the router & linked computers, as you can see, I still need help & I've got some learning to do.

  Any help I can get would be MOST appreciated.

  See you soon

  Pat Cook

  Denver, CO

  Make sure that the file and printer sharing is enabled...

  Also, make sure the computer are in the same workgroup...

  Default workgroup in Windows Vista has been renamed to WORKING group. In Windows XP, the default workgroup name is MSHOME...

  Also go into the computer on each computer software firewall and set it to "trust", other computers on your network.
  If your firewall or PC security program maintains a list of approved applications (also known as a "zone of confidence"), so make sure that your router is in the zone of confidence on your firewall...

• How can I get the screensaver to stop after a few minutes, while the screen turns off.

  original title: computer sleeps

  I leave my computer on all night.  When I'm done with it for the day, after 5 minutes, the screen saver turns on.  How can I get the screensaver to stop after a few minutes, while the screen turns off.  What we call that?  Sleep is - this Mode?  Hibernate? Thank you!

  Hi miztex37,

  ·         You want to put the computer in sleep mode?

  See the following article to see if it helps.

  Microsoft Windows XP - automatically put your computer into standby mode

  See also:

  Microsoft Windows XP - manually put your computer in sleep mode

• Cannot boot from the Windows 7 installation DVD. Error when installing XP "this installation disc is not compatible with your version of windows. To upgrade, you need the correct installation disc.

  Please help me

  Why my cd not DVD boot? will have a difficult time install my win7 home ed I have xp and the note ""this installation disc is not compatible with your version of windows. " To upgrade, you need the correct installation disc. For more information, see your computer system information. To install a new copy of Windows, restart (boot) your computer using the installation disc, and then select custom (advanced option). "always keep flashing... I already did your post, but I cant stand dvd always turn to windows xp? and my driver working I just installed win xp months ago

  Hi the prey,

  ·         What is the brand and model of the computer?

  You should check the settings of the computer BIOS (Basic Input\Output System) to boot from the CD/DVD. Check the manual or the support of the computer Web site for the same.

  Note: Be careful when you change the BIOS settings. The BIOS interface is designed for advanced users, and it is possible to change a setting that can prevent your computer from starting properly.

  Run the Windows 7 Upgrade Advisor to see if your computer is compatible to install Windows 7.

  Windows 7 Upgrade Advisor - download - Microsoft Windows

  See also:

  Installation and reinstallation of Windows 7

• Everything was fine until my Windows 10, lost the start feature, if I ever go back to Windows 7, in this process, I lost my Adobe Reader software, I tried about ten times with different versions and different locations, all with the same download error

  Please forgive me for not knowing how to use this forum, I am an old man and not good at computers, I called Adobe, they said it was my only hope!

  Sorry to repeat

  Everything was fine until my Windows 10, lost the start feature, so I had to go back to Windows 7, in this process, I lost my Adobe Reader software, I tried about ten times with different versions and different locations, all with the same error message that is download "the feature you are trying to use is on an unavailable network resource"... are looking for It seems that it does not find when I search there, and I no longer seem to have the AcroRead.msi... the most difficult file, I try, I get deeper and deeper into things I don't know... I am looking for a simple solution!

  When it gets to this point, it is probably better to start from scratch.

  First of all, download, install and run Adobe Reader cleaning tool to get rid of all remains little. Here is a link to the tool: Download Adobe Reader and Acrobat tool - Adobe Labs

  Then go to the following link to download the full installer for the reader.

  https://get.Adobe.com/reader/Enterprise/

• "This installation disc is not compatible with your version of Windows.

  I have a center of Lenovo think that I got from a friend. When I tried to install Windows 7, I get a pop up window that says: "this installation disc is not compatible with your version of Windows.

  Contact Lenovo and get a set of discs of recovery/restore the system if you want to reinstall the version of Windows that comes with it.  Now, your most likely problem is that you have a record of 64-bit and you try to install it inside the XP which is a 32-bit operating system.  Will not work.

• How Brussels a printer on a home network using two different versions of windows/XP and 7?

  I am using an HP printer installed on my home network and my Windows XP with my new Windows7/64 bit. Windows XP is 32-bit.

  Someone at - it the key?     Jack

  Hello

  If your network contains computers running different versions of Windows, put all computers in the same workgroup.

  I suggest you to refer the steps mentioned from the link, this could help you share the printer on the network.

  http://Windows.Microsoft.com/en-in/Windows/sharing-files-printers-help#sharing-files-and-printers=Windows-XP&V1H=win8tab1&V2H=win7tab5&V3H=winvistatab1&v4h=winxptab4

  Additional information:

  http://Windows.Microsoft.com/en-in/Windows7/networking-home-computers-running-different-versions-of-Windows

  For all windows questions do not hesitate to contact us and we will be happy to help you.

• Networking of computers running different versions of Windows

  I'm trying to set up a home network between my laptop (vista) and the computer (xp) that has the printer and internet connection. How can I set up? My laptop keeps telling me that I have to enter the network password, which I never put in place? Thank you!

  Hello

  Here's an article that talks about the same thing. If please go through it and follow the instructions on it. This will help you set up a home network between your computers.

  Networking of computers running different versions of Windows
  http://Windows.Microsoft.com/en-us/Windows-Vista/Networking-home-computers-running-different-versions-of-Windows

  Try that and check if it solves the problem. Hope this information helps you.

• U2715H - Windows automatically resized when the screen turns off then turn it back on

  • Windows 8.1 Pro
  • 1 single monitor connected to the PC
  • native resolution 2650 x 1440 at 60 Hz the value
  • through CDM of the monitor to the RFP the ti EVGA 750 SC (cable Dell)
  • all drivers updated on 28/12/15

  I just bought this monitor and I noticed this strange behavior. Whenever I have turn off the monitor (or it will turn off by itself), if I didn't have a maximized window, all windows (regardless of size) gets automatically resized to fit in the left upper quadrant when the screen turns back on again.  If I had something full screen, this behavior does not occur.

  I find this very annoying. This behavior happened with my previous monitor, which was only 1080 x 1200.

  I was unable to find any setting for the U2715H disable this "feature". This isn't because EasyArrange from Dell. I do not use this feature. And this always happens with Display Manager not installed.

  Is it just a 'feature' of Dell U2715H? Is responsible for Windows? Help, please.

  TIA

  There was no pilot or changes to the hardware of my first post.  BTW, my monitor is a Rev A02.

  A few days after my previous message, another question emerged.  Monitor flash intermittently ON / OFF every few seconds.  I unplugged/replugged the cable CDM - DP and that seems to fix things... until the next day.  This time, I nothing could fix the random rotation power SWITCH of the monitor.  Desperate, I decided to plug an old HDMI cable, I had to hang out.  Flashing problem has been resolved.  Not only this, using HDMI solved my original problem of auto resizing windows.

  The solution to my original problem: use an HDMI cable.  I went to the Dell CDM - DP cable and the problem has been resolved; no more windows resize automatically when the monitor turns off in sleep/towers.  I always get the native resolution at 60 Hz and there is no noticeable disadvantages to the use of the HDMI versus DP interface.  I've been using the HDMI cable for about a week and there is no other issue.

  Just for additional verification, I bought an Accell UltraAV DP - DP 1.2 cable (B142C-007 b-2), one of the few officially approved by VESA (see link below).  Using this cable does NOT my automatic window resizing problem original.  I do not use it long enough to see if they would prevent the random flashing question.

  I still don't know the exact cause of my original question.  I guess it's a driver problem with DisplayPort standard.  But if you do not need DP 1.2 functionality, I suggest that you just use your GPU HDMI output (if she has a).

  www.DisplayPort.org/.../How-to-Choose-a-DisplayPort-Cable-and-not-get-a-Bad-One

• Problem and error install monkey island 4 (escape from Monkey Island) - not compatible with my version of windows.

  This is to say that it is not compatible with my version of windows, I tried to open it with other versions of windows, xp, or 2000 and it does not open. He refuses to install and I am really frustrated. The bed 16-bit application error is...

  Any help would be greatly appreciated.

  Thank you

  Hi kirsteenie,

  1 Windows operating system you are using?

  2. you use 32-bit or the 64 bit version of Windows?

  16-bit applications are not supported in 64-bit Windows versions.

  If you use Windows 7, then you can install Windows XP mode and then install the game in XP mode and check if you can play the game or not.

  You can view the following link to use Windows XP mode:

  Install and use Windows XP Mode in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/install-and-use-Windows-XP-mode-in-Windows-7

  Note: Windows XP mode will run only in Windows 7 Professional, full and business editions.

  You can also contact the game manufacturer support and check.

  http://forums.LucasArts.com/index.jspa

  http://www.LucasArts.com/support/

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Defrag file version is not compatible with my version of windows

  I'm running vista 64, I tried to run a Disk Defragmenter, but it keeps telling me the dfrgui.exe file version is not compatible with my version of windows, where I can download a update to this file?

  Please start the command prompt (cmd.exe) with admin rights [1] and run sfc [2]:

  sfc.exe/scannow

  He is able to find and repair broken files? Are now able to run Disk Defragmenter?

  Best regards
  André

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-run-an-application-once-with-a-full-administrator-access-token [1]
  [2] http://support.microsoft.com/kb/929833 "a programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• How and when the computer turns off automatically?

  Listen to internet radio, Sys Pref > saving energy on the default setting, wake up and radio program cut.

  This is great... .buth how and when the computer turns off?  When I reopen it wifi comes back, I'm correct when she stops she also turns off wifi?

  Hello allan299,

  Thank you for using communities of Apple Support.

  According to your post, I see that you have any questions on how and when your computer shuts down, and how the WiFi on your Mac is affected. I know it's nice to be able to properly manage what happens when your computer stops and starts in mode 'sleep'. I'm happy to help you find the best resolution.

  You're right, when your computer stops completely it will turn the Wi - Fi. If you enable the wake for network access, Wi - Fi remains lit, and you can access shared resources on your computer, such as printers or iTunes shared playlists even when your computer is in "sleep". Definition of a calendar closing and start on your Mac can also be useful.

  Check out the following resources that will help the set options that control the energy use of your computer, sleep, and wake-up times for your Mac and the calendar from your Mac to turn on or turn off or go to sleep:

  OS X Yosemite: energy saver Preferences

  OS X Yosemite: set sleep and wake up on time for your Mac

  OS X Yosemite: A schedule for your Mac to turn on or turn off or go to sleep

  Best regards.

• Then the display turns off I can't get it back without force restart

  When the display switches off the power due to the low battery power & I can't get this back even when I plug it into the sector and having to force the computer to restart.
  Is there a pref somewhere to turn it off?

  Hello

  When the screen turns off, exactly? How much capacity has battery at the moment? 5 % ? More?
  Try to higher level.
  When you work with your laptop and the battery level is low battery and the alarm alert will appear in the taskbar, but you will be able to continue your work several minutes or connect the power running.

  I'm afraid that your laptop reaches the critical battery level and then maybe is too late for any action.
  Set the low battery level to 10% and when the notification is shown connect power adapter immediately.
  I imagine that the screen doesn't have to be out of all.

• The Magentic program does not work with newer versions of windows

  Original title: Programas compatibility application applications app applications Juego Juegos Heredado USO caudal Cuelgue Cuelgues

  The Magentic program does not work with newer versions of windows

  Hello danielbrauer,

  The magnetic site says the requirements are for Windows XP or higher. However, it is not on the Windows Vista or the Windows 7 Compatibility Center.

  You can try the following to see if it will help with compatibility. If the program is not compatible, then you try to install and run the program in compatibility mode.
  Use the following steps:
  (1) right click on the program
  2) click Properties
  3) click on the Compatibility tab
  (4) select run this program in compatibility mode and select Windows Vista or other operating system, the program has been run successfully.

  Check out the link here: make sure to run older programs in this version of Windows
  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  If this does not help, you can contact the magnet to see if they have an updated version.

  Sincerely,

  Marilyn