Firefox 4 will be not updated to firefox 5

Hello

I have 2 PC, both very similar set up.
1 PC: that I am on, is the version 4.0.1
2nd PC: version 5.0
Both have gotten to these steps via update through the "Check for Updates". Problem is 1 PC says it is up-to-date. So I'm confused and I was wondering why 1 PC does not update?

If there is any other information needed, please let me know.
Thank you!

Firefox 5 is without doubt a 5.0 (beta) version b1.

Have you ever install a version of Firefox 4 beta or release candidate?

It is possible that you are still on the beta channel.

You can check pref app.update.channel on the subject: config page.

If the value of this pref is beta so it is best to download and install the full version of Firefox 4, or edit the file \defaults\pref\channel-prefs.js in the folder of installation of Firefox 4 and change the line to:

pref("app.update.channel", "release");

Tags: Firefox

Similar Questions

  • Update Windows in Windows 7 will be not updated. Error code 80244008. Troubleshooting report says 'device or resource (web proxy) is not configured to accept connections on port "8080".

    Update Windows in Windows 7 will be not updated.

    Error code 80244008.

    Troubleshooting report says 'device or resource (web proxy) is not configured to accept connections on port "8080".

    You may encounter temporary connection errors [for example, 0 x 80244008] when you use Windows Update or Microsoft Update to install updates
    http://support.Microsoft.com/kb/836941

    What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

    A (another) Norton or McAfee application has already been installed on the computer (for example, a free trial version which is preinstalled when you bought it)?

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • I did a clean install of Windows XP Pro: Service Pack 1; Update will be not updated: 0x8024400A error

    I did a clean install of Windows XP Pro: Service Pack 1; Update will be not updated: 0x8024400A error

    Pass on several machines, cannot not run fix - it because I don't have the right to service pack cannot update the service pack because I can't update because of the 0x8024400A error

    About to panic. Could use some real help on this and not only refers to

    http://support.Microsoft.com/kb/836941

    The computer is a Dell Optiplex GX280

    What I installed is the chipset & drivers for the controller of the motherboard & ethernet.

    Internet works fine on the device, I am writing to you from him.

    Also, tried installing IE8 on one computer and run windows update, same error.

    I did a clean install of Windows XP Pro: Service Pack 1; Update will be not updated: 0x8024400A error

    Pass on several machines, cannot not run fix - it because I don't have the right to service pack cannot update the service pack because I can't update because of the 0x8024400A error

    About to panic. Could use some real help on this and not only refers to
    http://support.Microsoft.com/kb/836941

    The computer is a Dell Optiplex GX280

    What I installed is the chipset & drivers for the controller of the motherboard & ethernet.
    Internet works fine on the device, I am writing to you from him.

    Also, tried installing IE8 on one computer and run windows update, same error.

    Relax and breathe.

    FIRST: Uninstall IE8 and IE7 if they are installed.  Back to all the way back to IE6.  You want other patches before you get those.  Reboot after doing this.

    You are not the first to ask questions about how to upgrade a clean Windows XP - not even installation in the last week. In fact, I will just cut and paste my answer here... here:

    Get SP2 (manually) and save it to your desktop. (There's a link here.) [You are a COMPUTER professional for now.]

    Install it.

    Then restart at least a couple of times for a few minutes between each restart.

    Get SP3 (manually) and save it to your desktop. (There's a link here.) [You are a COMPUTER professional for now.]

    Install it.

    Then restart at least a couple of times for a few minutes between each restart.

    Download at least Internet Explorer 7 (if it is not Internet Explorer 8).

    Install it.

    Reset.

    Now, try to get the updates through the normal web page (http://windowsupdate.microsoft.com/) and see how much more you can get (100 +) and keep checking until you no longer have.

    Back - let everyone know if it worked for you.

  • Home premium Windows Vista 64-bit SP2 installed - will be not updated, still just trying to find loop updates

    Home premium Windows Vista 64-bit SP2 installed - will be not updated, still just trying to find loop updates.  He worked for years until now.

    How to fix?

    Thank you

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-update/Vista-Windows-Update-does-not-work/8385103e-4117-4b0c-B21F-27a266fdf4a9

  • HP Pavilion p6-2133w: graphics card will be not updated of the drivers

    My Amd Radeon HD 6530d will not update the drivers I have tried everything to update the drivers from 15.201.1151.0 to Crimson Edition Beta 16.2.1 any help will be appreciated

    @drago72, welcome to the forum.

    Normally, the drivers other those provided by HP will not work with their motheboards.  I suggest you go to Device Manager / graphics cards / right click on your video card / select Update driver software / search automatically for updated driver software.  If there is an updated driver, it will be found and installed.  If this is not the case, he will tell you that it is up-to-date.

    Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

  • MAIN titles, a gadget for Windows Vista availbale, will be not updated

    My MSNBC title, feed, an available Windows Vista Gadget, did not update itself with the titles of all day for about 10 days.

    How can I fix this and restore my daily headlines of food?

    Hello bob1063,

    Thank you for using the Microsoft Windows Vista Forums.

    Sorry, you have a problem with that.  I suggest trying to uninstall this gadget and then reinstall.  If you open the sidebar click on the (+) sign add a gadget at the top.  Then right-click on this gadget and select Delete.  You can then search gadget to reinstall.

    Please let us know status.  Thank you! Engineer James Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

  • iPad will be not updated to iOS 10

    My iPad will not recognize iOS 10.  I've updated my two iPhones (6) easily and successfully.  However, when I click on "Check for Updates" on my iPad, I get a message that the 9.3.5 version is the "current version".  It does not produce an error message.  It's an iPad 3.  I never had problems before update.  Recently, I did a restore of backup because he refused to play the video on one of my apps.  Restoring corrects this problem, but did not affect my inability to update the iOS.  I tried to install wireless and wired with iTunes on two different computers.  He said still 9.3.5 is the latest version.  I stopped and restarted several times iPad.  No luck.  I tried on several different networks.  No luck.

    This is because the iPad 3rd generation don't is not supported in iOS 10 (http://www.apple.com/ios/ios-10/).  9.3.5 IOS is the latest version of iOS for your iPad.

  • The Messenger app will be not updated. Stuck on "Waiting."... "and the logo in grey. How can I fix this or return to the previous edition that worked?

    I received a prompt on my Ipod touch 5th generation yesterday, that there is a new update of the Messenger application. So I tried to update, however, the app is now stuck on the phase "Waiting."... "and the logo has been disabled. I still get notifications of new messages from the app, but I can't open. I tried to remove and then reinstall the application but the application did not and the app store think that I always opened it. How can I fix this or return to the previous edition that worked?

    Thank you in advance!

    Hello cfossum,

    Looks like you have problems with a third party on your iPod touch app, since the Messages belongs to iOS and you would receive separate not quickly update.

    The resources below will provide some troubleshooting steps for the problem you are having with the Messenger application.

    If an application you have installed unexpectedly closes, unresponsive, or does not open

    Take care.

  • My 2007 iMac will be NOT updated! Help!

    My iMac mid 2007 was download OS X El Capitan during the night and the next morning, he says: "an error has occurred", now it will not let me update, how do I solve this problem? Last night, I upgraded the RAM to 4 without any problems. GB available 310. Im running mountain Lion. Help

    You can get in the Mac at all?
    Have you tried safe mode?

    You may also go up to 8 RAM for optimal performance

  • HP Envy Phoenix h9 - 1420t: Support Assistant will be not updated

    Computer model: HP Envy Phoenix h9 - 1420t

    OS: Win 8.1 Pro 64-bit

    HP Support Assistant

    Version: 8.3.27.17

    Framework: 12.5.26.37

    Since the upgrade to the latest version of the Support Assistant, I am unable to check the updates. The program has successfully completed phase "connect to HP servers", but then fails (x-watch gray instead of green check mark) to complete the remaining steps:

    • Download messages and updates of definition
    • Gathering configuration information
    • Scan your system
    • Preparation of the list of actions

    Any suggestions on arises at work?

    The steps I've tried: uninstallation with Revouninstaller, resettlement, reset

    @troubleshoot411, welcome to the forum.

    I agree with using Revo.  This is my go to app for malware.  When you used Revo, you use the advanced option?  This will not only remove the program from the HARD disk, but it removes remnants of the BIOS.  If this is not the case, this could be the problem.  I suggest to try the advanced option to remove HPSA and shut down the computer.  Then, start and reinstall HPSA here.

    Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

  • IPhone 6s don't sync for mac needs to date, but don't will be not updated for mac

    It drives me crazy, I need help that Mac is about to go out the window!  I downloaded itunes and installed as I needed to update the new 6 s sync and back up 5 old! and it will not again I checked all possiable for other updates and still no joy I can't get my new phone on sync or my Mac to synchronize with it!  Help!

    Hello! To sync an iPhone with iOS 9 or more on board, you need iTunes 12.3 or higher, which is not compatible with OS X 10.7.5.

    You need to upgrade your operating system or use another computer.

  • Pavilion g7-1269nr: Intel Chipset will be not updated.

    I always updated operating system and the programs, but never update of drivers. I didn't updated drivers, I thought, well I never think, just never heard of updating drivers, so never have.  Right now, I've updated all the drivers I think, will explain.

    I have the Raptr desktop application, and it checks your GPU for updates.

    It is said - driver Intel GPU (9.17.10.3347) update available

    So, I clicked on the button (the driver update), and it took me to Intel.com for I can download the "Intel Driver Update Utility.

    I downloaded and scanned my PC. The pilots, she showed was the GPU and Chipset.

    Under GPU, it says:

    A custom computer manufacturer driver is installed on your computer. The Intel Driver Update utility is not able to update the driver.< meaning="" there="" is="" one,="" and="" intel="" can't="" update="">

    Raptr and The Intel Driver Update Utility both suggest that I need a GPU update. When I go on the site of HP, scan the PC and watch the updates available under driver-graphics and there were 3; Intel, AMD and Nvidia. So, I downloaded the Intel one and check my PC with the Intel driver update utility. He said the same thing, like Raptr.

    Under Chipset, it says:

    Version of Intel Chipset Device Software (INF Update Utility-(EXE only) - installed 9.2.0.1011, latest version - 10.0.27

    So, I download, then installed. There as well.

    I don't know if it's important, but in my opinion, it might be.

    I bought my PC to Aaron, and he had stuff all this Aaron on him and all the apps pesky that HP puts on the PC there are.

    So, I came here to see what I could do about it. I didn't know that it's just that I bought a pc and it came with tons of additions that I don't want. I wanted to just simple Windows 7 operating system. I think that the person who helped me was named Sheryl, not for sure. But she suggested a. ISO. So I downloaded and installed. Entered my key for Windows authenticate and was in business.

    Since I installed the. ISO, under Device Manager, there is a unit named "Teredo Tunneling Pseudo-Interface and can not find the program for her." He has one of those yellow triangle with an exclamation mark inside.

    Any help would be greatly appreciated

    Hello

    Please pass the link below, download them and install the Intel® driver update utility, it automatically identify and find drivers for your device.

    http://www.Intel.com/p/en_US/support/detect

    Intel (r) Driver Update Utility download version allows users to scan their computing devices for the latest updated drivers available from Intel.

    Supported with release products: graphics, chipset (Chipset INF), wireless, the mothers Intel (r), BUD Intel (r)

    If above utility does not work, here is the link for the support and drivers for you unit. Please visit the link and download the necessary drivers.

    http://support.HP.com/us-en/drivers/selfservice/HP-Pavilion-G7-1200-notebook-PC-series/5145712/model/5177934#Z7_3054ICK0KGTE30AQO5O3KA30R1

    Please go through the link below on how to manually install a driver for Microsoft Windows 7 *.

     

    http://www.Intel.com/support/graphics/sb/CS-033915.htm

     

     

    Hope this helps, for other queries in response to the post and feel free to join us again

    * Click the "Thumbs up" button on the left to say thank you *.

    Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

     

     

  • Windows 7 Pro will be not updated for Windows: fails with the error code 1 (0 x 000000000000001), which is a problem of language pack, version __Pro DON 'T SUPPORT SEVERAL LANGUAGES '.

    Windows colleagues for support.

    My windows install/windows update is broken; There will not be security critical update, installers fail with the error

    code 1, indicating a problem with language packs; I use widows 7 pro for software development.

    Several lanagues packs are not part of windows 7. should I upgrade to ultimate for your problem?

    More sophisticated repair attempt, SFC/scannow indicates corruption, but cannot fix it.

    Hand, install the update package out of work.

    Your opinion is welcome. I have

    Hey Hey Hey Doc K whadu say?

    I solved my problem;

    the problem was owner and permission on my programs, all users, the program data and my programs (86).

    As I type this i / m re - run SFC/verify only and a big pile of sucessfully some updates installed.

    What have I done? I took possession of the special directories above from "TrustedInstaller".

    Even when owned by TrustedInstaller, it does not have permissions. Some places I found rejection specific to the owner of the network.

    -What happened? Do you have a trusted Installer get stuck Mid-install?

    I took possession of SYSTEM, and made sure the CREATOR had every right, as in the SYSTEM and

    USER, AUTHENTICATED USER. I was perhaps too broad.

    I took possession, and then all of the repressed, updates windows are presented themselves to install,.

    and I expect /VERIFYNOW SFC before as I mark this as running.

    I'm fairly certain VS2008 and VS2010 now repair and install.

    Hmmm... always to see funny error message in SFC...

    We need a tool to give an overview of a directory tree ownership and permissions.

    dB

    Hey Hey Hey Doc K whadu say?

  • Office home and Student 2007 will be not updated

    I just bought this package of office 2007, it installed on my laptop Vista well, the only problem is that it will not be updated with the update program.

    I also tried to install some updates manually, no use.

    I'm now 14 updates (Important).

    I tried to go into the office and selected updated by Word and got a message saying "this operation has been cancelled due to restrictions in effect on this computer. Please contact your system administrator.

    I am the owner of account on this laptop. With administrator rights.
    Help, please
    Thank you

    Thank you very much M Amrita,

    One of my friends opened the administrator account and used to update my office package.

    Thanks anyway

    Duane.

  • Windows will install not update (Cumulative Security Update for Internet Exp 9 for Windows Vista - KB2722913

    I tried to download the update above from 16/08/12 and it will never end.   I tried to install it by itself and it always fails.  Help

    Hello
    1. What is the full error message received when the problem occurs?
    2 is the issue limited to 2722913 Ko?
    3. what the hell are you talking to "by himself"?

    Method 1:

    You can temporarily disable the antivirus software, and then try to install the update to see if that helps.

    Rrefer link for more information.

    http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

    Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

    Method 2:

    You can download the update from the link following and installing it manually in a clean boot state:
    Download link:

    MS12-052: Cumulative security for Internet Explorer update: August 14, 2012
    http://support.Microsoft.com/kb/2722913

    To help resolve the error and other messages, you can start Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
    How to solve the problem by running the clean boot in Windows Vista or Windows 7:
    http://support.Microsoft.com/kb/929135

    Note: Once you have completed troubleshooting, perform step 7: to reset the computer as usual.

Maybe you are looking for