Firefox 7.0 is not supported by my Blackboard Vista required at school

Similar Questions

• Selected physical channel DAQmxCreateAIVoltageChan OR-USB-9237 VB6 does not support the type of action required

  I have a VB6 program with code that correctly reads the analog inputs of a NOR-USB-6008.

  I tried to re - use the code in a module of extensometer OR-USB-9237, but at the stage of DAQmxCreateAIVoltageChan, I get the following error:

  "Measurements: physical channel selected does not support the type of measure required by the virtual channel you create."

  Create a channel to a type of measure that is supported by the physical channel, or select a physical channel that supports the type of measure. »

  Should I call one function other than DAQmxCreateAIVoltageChan?

  If so, what is it, or where can I find the reference for these functions?

  Or - if it of the right function, should I pass different arguments?  Currently, I'll call you:

  DAQmxErrChk DAQmxCreateAIVoltageChan(taskHandle, "Dev1/ai1", "", DAQmx_Val_Cfg_Default,-10, 10, DAQmx_Val_VoltageUnits1_Volts, "")

  Thanks in advance for your help

  -Alas

  I thought she 372251a. PDF

  Firstly, the correct function is DAQmxCreateAIVoltageChanWithExcit

  Second, you can't just ask for a sample single channel - ask for 2 samples instead.

  -Alas

• Physical channel selected does not support the type of output required by virtual channel

  I use a box USB-6251.  Inside of MAX, I can set the device to Dev1 / ao1 sine wave generation and if he have output a sine wave.  When I use DAQmx DAQmxCreateAOFuncGenChan function I get error: selected physical channel does not support the type of output required by virtual channel.  The pilot DAQmx does FuncGen on the box USB-6251 or MAX out a set of tensions?

  Hi Paul,.

  Welcome to the Forums EITHER!  The DAQmxCreateAOFuncGenChan is supported only on products Elvis II.  For other devices, including the 6251, you must use the ordinary DAQmxCreateAOVoltageChan and create your own data buffer.  I would recommend looking in the following example:

  Start > all programs > National Instruments > NOR-DAQ > textual Code > ANSI C examples...

  Analog on > generate voltage > Cont Gen Volt Wfm - Int Clk

  In MAX the Sinewave output is used as a test signal - in this case MAX is a period of the wave sine values to write to the buffer and generate these data.  Again, you can produce a sine wave (or any other function) using the AOVoltageChan, but the AOFunctionGenChan is used only with Elvis II.  Just generate data points for the sine wave that will produce DAQ hardware.

  -John

• My Mac with OS 10.5.8 says I can't open Firefox because it is not supported on this architecture. I tried to update my version, and that's all I get now. What can I do to use Firefox again? Thank you.

  My computer is not allowing me to use any version of Firefox, after several attempts to download. Simply, I get a message that Firefox is not supported on this architecture, and the Firefox icon in my toolbar now has a circle with a line through it top (cancelled). I hope someone can explain what I need to do to be able to use Firefox once more. Thank you, TC

  As you have a PPC or Power Mac the last form of waiver Mozilla to work on the PPC is Firefox 3.6. *

  3.6.23 Firefox can be found at http://www.mozilla.com/en-US/firefox/all-older.html

  Since you have a PPC Mac, there is this option of third-party for Firefox 7.0.1
  http://www.floodgap.com/software/tenfourfox/

  From Firefox 4.0, a Mac Intel with OS x 10.5 + is required for versions of Mozilla's Firefox. http://www.Mozilla.org/en-us/Firefox/7.0.1/system-requirements/

• my java is not supported with my windows (vista)?

  my java is not compatible with my windows (vista)?

  Hello

  Try to reinstall a Vista Javadriver.

  See the following Web site for more information:

  http://www.windowsreference.com/Internet-Explorer/how-to-install-Java-in-Vista-and-enable-Java-in-Internet-Explorer/

  Kind regards

  Joel

• Why am I periodically the message that my version of Firefox is exceeded or not supported?

  On my 2008 MacBook Pro with OS 10.6.8 I use Firefox 17.0.1.

  It's because your User Agent string (what websites the browser you are using) is corrupted. You can fix it by following these instructions: http://support.mozilla.org/en-US/kb/websites-say-firefox-outdated-or-incompatible

• Only my Gmail open in HTML and claims that my 22.0 Firefox is a browser not supported. Running Mac 10.6.8

  My Gmail opens only in basic HTML so I lose Google voice. They're trying to make me look the Chrome browser?

  After you have your Mac? Your text 'user agent' is:

  Mozilla/5.0 (X 11; U; Linux i686; en-US; RV:1.9.0.3) Gecko/20100101 Firefox/4.0 Ubuntu/8.04

  Assuming that isn't true, see this article to find out how to fix it: sites say that Firefox is obsolete or incompatible, even if it's the latest version.

  A little luck?

• I may have inadvertently downloaded Firefox 5 instead of 4 and cannot open the application because it is not supported. Can I still download Firefox 4, which I was planning to do?

  I tried to update to Firefox 3 Firefox 4. But, after completing the download and then tried to open the Firefox application, I got a message saying: "Cannot open the application"Firefox"because it is not supported on this architecture." Is it possible that I may have inadvertently downloaded Firefox 5? I do not think that my system support
  Firefox 5. I'm not a geek, so I really appreciated any help you can give me. Thank you.

  • Versions of Firefox 4 and later do not run a Mac PowerPC.
  • Firefox 4 and later requires at least OS X 10.5 and an Intel Mac.
  • http://www.Mozilla.com/Firefox/5.0/system-requirements/

  For a non-official Firefox 4 compatible version (TenFourFox) which works on Mac PowerPC with OS X 10.4.11 or OS X 10.5.8, you can consult:

  • http://www.floodgap.com/software/tenfourfox/

  Firefox 3.6.x (Mac OS X 10.4 and later versions) can be found here:

  • http://www.Mozilla.com/en-us/Firefox/all-older.html

• I use Mac OS 10.4.11 and after downloading firefox 4.0, I get a circle + bar symbol oblique covering the logo of firefox - and it will not work after copy in my applications folder. What is the problem? Had to reinstall 3.6

  I followed the instructions on the screen to download firefox 4.0. After the launch of the dmg image in the window of firefox dmg is the symbol of firefox with a "do not go" symbol on it (for example as a sign of the universal movement for "don't go this way" - red red circle with a diagonal line). "

  Copied on ANYWAY - which was stupid - and he says: "Cannot open the application"Firefox"because it is not supported on this system."

  I couldn't find documentation saying my OS has not been supported by firefox 4.0.

  Is there away around this problem?

  Firefox 4 will not work on OS X 10.4, it requires at least OS X 10.5 and an Intel Mac.

  There is an accumulation of third party that runs under OS X 10.4 and Mac PPC, for more details, see http://www.floodgap.com/software/tenfourfox

• MEDIA IN CD/DVD DRIVE IS NOT READABLE (ATAPI DVD A DH16AYH ATA DEVICE) IS IN THE DRIVE OR THE MEDIA FORMAT IS NOT SUPPORTED

  I recently had to change the map media on my pc and now I can't get the cd player to read any CD or DVD, now I get this message when I run the troubleshooter of hardware and devices "MEDIA IN the READER of CD/DVD IS NOT PLAYS (ATAPI DVD A DH16AYH ATA DEVICE) THE DISC IS EMPTY OR THE MEDIA FORMAT IS NOT SUPPORTED" I have windows vista.
  Thank you

  Hi Euro Italia stone,

  Thank you for your message.

  What is the make and model of the press you card changed?

  You can try the DVD drive in another computer to see if it's a failure?

  What is your computer make and model?

  I suggest you check the cables connected to the training to see if they are loose.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I get Nitro PC installed properly, so it does not say that he may not support a file or a codec required that it blocks and other problems.

  How can I get Nitro PC installed properly, so it does not say that he may not support a file or the required codec, which it does in Windows Media Player, everything seems to go through there and Nitro prevents me from opening photos or electronic-mail/transfer their. Also, what are the appropriate programs to run files in the documents library and photos. recently, I lost all my documents, the files are there but now empty. It happened a little while before had spoken, by buying the GoFlex Seagate plug of iYogi I was stupid enough to buy their storys. Now that I told them that I used to pay $ 400 to renew my contract, which has more than a year and a half left in this regard that they were still treat me worse than ever. I even bought a program that is supposed to protect your bank account, but only have a debit card which they protect not only credit cards, it was not even mentioned in the contract or the sales pitch. The Seagate GoFlex is sitting here unplugged after that they could not challenge or whatever it is to recover after at least 4 attempts. Brief this cowboy got scalped, but if I can get the Nitro to block all my stuff I would be off to a good start to correct things. Also, I had a printer that was supposed to be a fax with all sorts of other gadgets they had me plug with a wire and wireless and never had to use the fax once and continue receiving invalid messages when I try to put in place something like snapfish, which seems to be an automatic link to my set of requirements. I'm lost.

  Maybe their support/forums?

  http://support.nitropdf.com/home

• 11.1.2.4.0: Java version 1.6.0_24 not supported. ... must be 1.6.0_35

  Hello
  
  Yesterday, may 2, 2013 Oracle JDeveloper 11.1.2.4.0 released
  See http://www.oracle.com/technetwork/developer-tools/jdev/jdev-11gr2-nf-404365.html
  
  I downloaded the Studio Edition 11.1.2.4.0 Windows Installer (jdevstudio11124install.exe).
  During installation, I used JDK provided as part of the install file.
  
  When I tried to start it I got the message
  "Java version 1.6.0_24 not supported. The minimum version required is 1.6.0_35. "
  See http://www.consideringred.com/files/oracle/img/2013/jdev111240-java-not-supported-20130503.png
  
  Clicking OK showed a dialog box to select a path to a JDK
  See http://www.consideringred.com/files/oracle/img/2013/jdev111240-path-to-JDK-20130503.png
  
  After downloading and installing 'jdk-6u43-windows - x 64 .exe' I walked into "C:\Program Files\Java\jdk1.6.0_43" which allowed me to run JDeveloper.
  
  Maybe I missed something, but it seems strange that the installation file comes with a version of Java not supported, right?
  
  concerning
  Jan Vervecken

  Thanks for reporting this. It was an oversight on our part.

  Just a quick recap for all those who may come across this post more later. In JDeveloper 11.1.2.4.0, to group us JDK 1.6 update 24 in (jdevstudio11124install.exe and jdevstudio11124install.bin) platform-specific installation programs. We had originally planned to capture and include a newer version of the JDK 1.6 in the 11.1.2.4.0 version, but due to reasons I will not here go into, we have been unable to do. However, we had already begun to change some of the user interface (more precisely the error message you get started if you are using a version of the JDK does not support) based on the JDK version that is presumed, and we have failed to regularize this UI change.

  So, it follows that the JDK 1.6 update 24 is the minimum version required for 11.1.2.4.0. The message error say otherwise is our error. Needless to say, it's rather embarrassing, and we want to solve this problem as soon as possible. In the coming days, we intend to publish an 11.1.2.4.0 update release with this code, return to the display of an error only for versions prior to version 1.6 update 24 JDK.

  What should you do? If you do not see the error (because you are using JDK 1.6 update 35 or higher, or you are on a non-Windows platform), you don't need to make any changes. If, however, you see this error and you want to go far, you can either install a JDK 1.6 update 35 or later version (instructions on how to do so are caught later in this thread) or you can re - download and re-install JDeveloper a few days from now, when we release the update. In this update, the only included bug fix will be to change the condition in which the error is reported. There will not be a corresponding update ADF version, because this problem applies only to the Launcher JDeveloper on Windows code.

  We apologize for the confusion and thank you for your continued support.

  -Brian

• WebEx does not support Firefox 64; is there an alternative to return to Firefox 41, 32-bit?

  I spend at each opening of webex session you transfer files to temporary webex because Firefox 64 is not supported. I don't understand why Mozilla and Webex need to make things difficult for customers not to overcome differences. Should I go back use of considerably older Firefox which is always in 32-bit code? Can I load both Firefoxe versions on the same machine or they will conflict?

  DonJoyceWard said

  Should I go back use of considerably older Firefox which is always in 32-bit code?

  The current version of Firefox 42.0 (Win32/Win64) is not older. Firefox 45.0a1 nightly compilations you are testing is in development and not even close release. Release of < beta < Aurora (developers edition) < every night

  If you wanted to Win64 Firefox there is a release of 42.0 Win64 Firefox it is, however, not so public on mozilla.org
  https://archive.Mozilla.org/pub/Firefox/releases/42.0/Win64/

  The Win64 Firefox 42.0 has 64-bit Flash Player white listed. The next exit Win64 Firefox 43.0 looks like 64-bit plugin Silverlight will be white listed.

• PC firefox guard asks me to install firefox on my android, which is not supported.

  The version of Firefox PC appears and request "do install you Firefox on your Android device. When I try, I am told that my phone is not supported. Later, the popup appears again. And once again.

  Hey people. The bug has been fixed in blink of an eye, and you should not see the prompt. I understand that it was boring, I say all the time by disabling the functionality of browser.selfsupport.url.

  Heartbeat is the main duct, we have to communicate with our users. Based on the responses that we get to our research of current heart rate programs we change the future of Firefox. We are committed to building products for our USERS. The only way for us to do is to communicate with our user base impressive on a regular basis.

  Then please consider Heartbeat on now that the problem has been resolved. If you see a heartbeat prompt asking you your feedback, please consider replying. We want to hear from you!

• some sites do not supported by firefox

  Example, jcpenney, not supported, why

  https://support.Mozilla.org/en-us/KB/Firefox-cant-load-websites-other-browsers-can