Firefox comes back to the top of the page when returning from a url why

Similar Questions

• If I have a virus and I restore my computer, the virus will come back to the computer when the files are restored.

  Original title: computer viruses.

  If I have a virus and I restore my computer, the virus will come back to the computer when the files are restored.

  Hello

  to be Safe side scan always media files are on before you reinstall your data

  using drives flash etc is a well known to transfer viruses, etc.

• How get control back to the page when OAException is raised

  Hello
  
  I am facing a problem where I need to get control back to the page after the oaException has been lifted on the page for a scenario (with custom Message).
  Because we have some javascript validations to be run on the same page, even if a warning is lifted through OAException for a few reasons.
  
  Please suggest me if there is no function to take in charge control once after the exception is thrown with the personalized message in the page (or) is there another class or function can be used to send a message with the symbol 'WARNING' that returns control to the page once it is made to go ahead with the postings.
  
  
  I appreciate your valuable answers.
  
  
  Thank you
  Trehout

  Hello

  I think that since this is a warning message, you can use the API putDialogMessage on the code of the controller, then you can do this by using:

    if (test_warning) {
        // Warning condition, adding a warning display to page
        OAException warning = new OAException("APP","MSG_NAME", tokens);
        pageContext.putDialogMessage(warning);
        // Since putDialogMessage does not stop processing,
        // we can call App Module logic or further processing
        am.invokeMethod("DoSomethingAfterWarning");
    } else {
        // Process without warnings
    }
  

  In this way, you can put a Message of dialogue as does an OAException, without harming the javascript validation, I think. Pay attention to the fact, however, that although an OAException stops the treatment at the time wherever it is thrown, a call to putDialogMessage does not stop the code below himself to run. If you need to stop treatment, join this call in an IF block so that it is running and then jump at the end of the processFormRequest or processRequest method.

  It will be useful,
  Thiago

  Published by: Thiago on December 26, 2008 11:48

• Why Firefox does not scroll the page when choosing & the cursor reaches the bottom of the screen

  The selection of text on a page of the screen when the cursor reaches the lower edge of the screen in Firefox (version 9.0.1) does not scroll. Other programs (including IE) do, so it doesn't seem to be a local computer problem.
  I don't see a setting in the page options that enables / disables this then what is the solution?

  Activate the module bar (Firefox > Options or view > toolbars;) CTRL + /) or find bar to make Firefox scroll the page while selecting the text (Ctrl + F).

• Restart the computer when returning from hibernation

  I'm a noob to PC, with a renovated 3440 of Dell with Windows 7 Professional. I have problems with my computer restart when he returned after hibernation. I looked on other posts, and it seems as if others have had the same trouble. Unfortunately, I don't know enough to understand the explanations.

  The error message I receive after reboot is as follows:

  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7601.2.1.0.256.48
  Locale ID: 1033

  More information about the problem:
  BCCode: 7A
  BCP1: FFFFF6FC50010370
  BCP2: FFFFFFFFC00000C0
  BCP3: 0000000011065880
  BCP4: FFFFF8A00206E000
  OS version: 6_1_7601
  Service Pack: 1_0
  Product: 256_1

  Files helping to describe the problem:
  C:\Windows\Minidump\051114-16099-01.dmp
  C:\Users\Tony\AppData\Local\Temp\WER-58266-0.SysData.XML

  Read our privacy statement online:
  http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

  If the online privacy statement is not available, please read our offline privacy statement:
  C:\Windows\system32\en-US\erofflps.txt

  --

  Help, please. Thank you!

  td3323

  Although not directly involved in accidents, the referenced third-party only processes are mcshield.exe and mctray.exe, both belonging to The Antivirus Mcafee and Trend micro tmlisten.exe.

  It seems that you have items of Trend micro remaining on your system and causing corruption and the issue of the conflict with Mcafee.

  Error_code: (NTSTATUS) 0xc00000c0 - this device does not exist.

  BUGCHECK_STR: 0x7a_c00000c0

  CUSTOMER_CRASH_COUNT: 1

  DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

  Nom_processus: McTray.exe (Mcafee AV)

  CURRENT_IRQL: 0

  Error_code: (NTSTATUS) 0xc00000c0 - this device does not exist.

  BUGCHECK_STR: 0x7a_c00000c0

  CUSTOMER_CRASH_COUNT: 1

  DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

  Nom_processus: TmListen.exe (trend micro)

  CURRENT_IRQL: 0

  Remove Mcafee completely, the remains of Trend micro cleaning and replace with Microsoft Security Essentials.

  McAfee uninstall utility

  http://service.McAfee.com/FAQDocument.aspx?ID=TS101331

  Uninstall Trend Micro program thanks to the Trend Micro Diagnostic Toolkit

  http://eSupport.trendmicro.com/solution/en-us/1037161.aspx

  Microsoft security essentials.

  http://Windows.Microsoft.com/en-us/Windows/Security-Essentials-download

  Run the Chkdsk command from an elevated command prompt window.

  CHKDSK c: /r

  You also can run the memory test (memtest86). Check the initial link predict how.

  Let us know the results of the tests.

• Query regarding different refreshing data from the grid when returned from a workflow

  Hi Experts,

  JDEV version is: 11.1.1.5

  Our application uses dynamic tabs the user interface shell.

  Whenever the user connects, it is taken in A TAB.

  Since the TAB A, the user navigates to TAB B.

  TAB B has a GRID B(table with a few records).

  Column A on TAB B has a hyperlink which, once clicked on will open a stream of different tasks in a different tab.

  Click on the column of hyperlink for the different lines will open different tf (under certain conditions).

  By clicking on the hyperlink, that the method _launchActivity(String title, String taskflowId, boolean newTab) is used, which the TF open in a new tab.

  The user works on the TF (in a new tab) which opened on click of a hyperlink in the column is and click on SAVE.

  Click to save some operation and removeCurrentTab method is called which will close the current tab, and control passes to the first tab (TAB A).

  The problem:

  Once the user tries to click or to return to the TAB B the WHAT GRID B is never updated that we cannot get the descriptor to refresh the data in the grid.

  Any suggestions would be much appreciated.

  Thank you

  Jean Claude

  huh, I thought it was another library in question.

  In all cases, you can use contextual event (when you close the current tab).

  The second option is to navigate to the method executeQuery by code call activities:

  https://blogs.Oracle.com/jdevotnharvest/entry/how-to_navigate_in_bounded_task_flows

• Skip the password when returning from sleep

  I'm really embarrassed to ask this question again.

  Shorlly after that I first set up my mini ipad4 I did something that allowed me to go to the lock screen directly without having to give a password every time the Ipad is awake or started cold...  For the life of me I don't remember how I did it I can't find the "how to" instructions, I found on the web somewhere.  I need this because I just do a restore to Icloud and the device wants a password to access the lock screen every time.

  Could someone please refresh my memory so that I don't have to type in the access code?

  Thank you very much.

  Do you mean open the iPad and get to the home screen of the iPad without having to enter a password? If you do then settings > password > (enter password) > disable password

• A problem of time unusual Windows: time of Windows always comes back to the year 2005

  Specifications:

  Microsoft Windows XP Professional
  Version 2002
  Service Pack 3

  AMD Athlon XP 2700 +.

  At the start, and sometimes even if the computer is running, the windows of time always comes back to the year 2005, while maintaining the right hour, minute, second, day and month.

  I tried a number of solutions such as the "authoritative time server configuration", analysis of the computer for viruses and restarting the service of time via the command prompt, but without success. I am able to synchronize the time with a server, but only after the change of the year 2011.

  My installation of Windows is updated regularly and I'm always connected to the internet. I'm pretty sure that this is not a BIOS problem I replaced the CMOS battery and have ensured that the BIOS time is correct.

  In addition to the usual questions that arise in some programs due to an incorrect time, I noticed that when you use Firefox 4, the Google search engine always resets to "Instant Search" despite my having the clocks to the correct year.

  Any ideas?

  If I read your messages, I have that, amongst other times, pick up this always happens at startup.  This is the case, you can first check that the time is set correctly in the BIOS before you boot into Windows.  If it is, and, as you think, a program is causing this problem so the task is to know which.  A lot of startup programs each time you start Windows.  The boot configuration with minimum nude of running processes is called "Safe Mode".  So start your computer Safe Mode (press F8 as your computer starts).  When he arrives, check the date and time.  If it of OK and has not changed, then one of the other optional components must be the cause.  To narrow down that one, you can use "msconfig" to toggle the startup items groups until you find the one that is causing your problem.  The procedure for doing this is described in this article:

  "How to solve configuration errors by using the System Configuration utility in Windows XP"
    <>http://support.Microsoft.com/kb/310560 >

  I start by disabling everything in the "Startup" tab  If this solves the problem, then I start allowing things in this tab a little at a time until I have find the culprit. If the Startup tab does not resolve the problem, then I try disabling items in the tab "Services".  I usually start with non-Microsoft services.

  Of course on the machine who recently had this problem, you could try a shotgun approach and do a simple "System Restore" to a point in time before this problem.  It will probably fix the problem, but you will not know what caused it.

  "How to restore Windows XP to a previous state"
    <>http://support.Microsoft.com/kb/306084 >

  HTH,
  JW

• If I lose LTE when I come back on the cover he always says 3g

  I think I need to reset something, do not remember what.

  If I get out of the cover, when I come back on the cover custom phone access back to the tower or signal.

  Brand new 6 s, darnit

  How do I please you?

  Hey Randyaaaa,

  Not being is not able to connect to the cellular network when he returned in coverage areas. I had something like that happen to me before.

  What I would say is first reboot the phone by holding down the button on/standby 15 seconds, and then dragging the cursor on the screen.

  Once restart you the phone see if it connects properly. If this does not work I suggest to reset the network settings. This clears things like networks and Wi - Fi passwords remembers.

  To reset all network settings tap Settings > general > reset > reset all network settings. The phone will reboot and that usually solves problems like this.

  See you soon

• Given that I have updated to IOS 9.3.1 my iBooks PDF documents are uploaded to the cloud so that they can be shared on multiple devices, however when I rename a PDF, it comes back to the original name every time iBooks is updated.

  Given that I have updated to IOS 9.3.1 my iBooks PDF documents are uploaded to the cloud so that they can be shared on multiple devices, however when I rename a PDF, it comes back to the original name every time iBooks is updated.   Anyone who has similar problems and no one knows if there is a resolution?

  Thank you

  Johanine

  I hope that they address it quickly.  It is painful to have discovered my renowned PDFs are to difficult to identify file names their given by their authors.

• I bought an iPhone 6s and more in the United States, now its screen is broken, I live in China, personal APPLE let me come back to the United States for maintenance!  So ridiculous, help! Thank you!

  I bought an iPhone 6s and more in the United States, now its screen is broken, I live in China, personal APPLE let me come back to the United States for maintenance!  So ridiculous, help! Thank you!

  the iPhone may be served only in the country where it was purchased. Nothing strange in this situation. You can ask your friends or relatives in US to take your device at the Apple Store it.

• My toolbar was at the bottom and is not on the right side of the screen when I turned on the PC. How do come back on the bottom?

  How do you reposisition the toolbar background down

  Wednesday, June 13, 2012 19:45:28 + 0000, BJWoodham wrote:

  My tool bar downstairs was on the right side of the screen when I turned on the PC this morning. How do come back on the bottom?

  You say "toolbar." Do you mean the taskbar?

  Although by default, the taskbar is displayed on the bottom of the screen,
  It can be on any of the sides on what you prefer. To move any
  side to side, simply click an unused portion and drag
  where you want it. Don't forget to click inside it, not on the edge.
  by clicking on the edge and dragging will resize not move.

  If it does not move, it can be locked. In this case, right click on it
  and uncheck "Lock the taskbar", then try again.

  Moreover, with the screen monitors wide today, I prefer the taskbar
  on the left or the right of the screen. I think that allows a better
  use of real estate than have it at the bottom of screen.
  Ken Blake, Microsoft MVP

• Windows Update - it gets to the final stage of the update every time it goes to "Starting Windows" and then it all comes back to the update

  Original title: Windows Update keeps reseting

  My computer had a mandatory update that began when turned on. Happens to the last step of the update every time, it goes to the "starting Windows" and then it all comes back to the update. Turn on the computer and then next turn has not changed anything either, and I can't after that.

  Hi Reilly,

  Thank you for the update on that.

  Please follow the steps in method 1, by our Support Engineer Ganesh Achar B replied on 12 February 2015 on the last response.

  If you are able to start the computer in safe mode, take note of the number of KB updates which fails to install.
   

  Also you can restore the system in safe mode.

  Check out the link below to perform a restore of the system.

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  Warning: System Restore affects file system of Windows, programs and registry settings. It can also make changes to scripts, files, batch and other types of executable files created under any user account on your computer. System Restore does not affect personal files, such as e-mail, documents, or photos, so it cannot help you restore a deleted file. If you have backups of your files, you can restore files from a backup.

  Please answer us with the State to proceed to further troubleshooting.

• When you use the Brush tool, it always comes back to the single stroke and no fill. How can I fix it? I have already disabled the new art of a choice of the basic look.

  When you use the Brush tool, it always comes back to the single stroke and no fill. How can I fix it? I have already disabled the new art of a choice of the basic look.

  Double-click on the Brush tool and you will see important option.

  Please also read the manual on the other options.

• How can I disable him flipping back between the pages with PgUp and PgDn? Please tell me that I can!

  From Firefox 4, it seems to have been decided that PgUp and PgDn are now buttons with which you return back between the pages. For me, this means essentially almost lose valuable information, because I actually use up and down pages, so I wonder. How can I disable this new and quite bothersome?

  Please tell me that I can!

  In the details of your system, I see this card installed: Macromedia Shockwave for Director Netscape plug-in, version 8.0

  You also seem to have the last, although always obsolete installed namely Adobe Shockwave for Director Netscape plug-in, version 11.5

  First, click on the orange button Firefox, go to add-ons and Plugins and disable the version of Macromedia.

  Then go to http://get.adobe.com/shockwave/ and update it.

  If the problem persists then, try running Firefox in Firefox to solve the issues in Safe Mode. If it works properly in this configuration, then one of your modules is the culprit.