Firefox continues to run even after the release in Manager Windows tasks and has about as much memory to affect other applications

Similar Questions

• Processor/fan continues to run even after turning off the laptop

  I'm using Inspiron 15 3542

  I've updated my OS to Windows 10, but sometimes will not stop the fan from the processor/even after discontinuation of the laptop (as well as the display goes off)! The fan continues and continues. And after this laptop won't turn on even! I have to open the battery, and then it lights up!

  I downloaded almost all the software required for my laptop dell for Windows 10 x 64 software download through bit.

  PS: I searched the forum google/checked, and the solution I found was to download Intel Management Engine. I did download and install it, but the problem seems to stay...

  Kindly help and thanks in advance!

  Sorry for the double post!

  Found a solution: https://www.dell.com/support/home/in/en/indhs1/Drivers/DriversDetails?driverId=NFY3D&fileId=3497768106&osCode=WT64A&productCode=inspiron-15-3542-laptop&languageCode=EN&categoryId=FW

  I have installed, be informed after several tests

• Recently, my laptop was hacked despite the defender of the window and the firewall running. After the accident, I have WINDOWS DEFENDER IS SETTING SWITCHED ON

  Recently, my laptop was hacked despite the defender of the window and the firewall running. After that accident, I reinstalled vista Dell supplied CD. Initially defnder window was running, but I discovered it suddenlly, if off. Attempts to change IT is futile because it shows Run Time error

  There is an installed antivirus program? Windows Defender is not an AV, it protects the system of spyware and potentially unwanted programs.
  Is there an antivirus or Security Suite program that is installed with Windows Vista included on the Dell disk?

  If so, what is disable Windows Defender, such as AV/SS can have a spyware component included with what is supposed to disable Windows Defender to not cause conflicts.

  Expert MowGreen Windows IT Pro - consumer safety

• Equium A100 - fan runs constantly after the release of sleep

  I was faced with a problem with an Equium A100, if the system is put into mode 'sleep', and when he took over this mode the cpu fan runs constantly never turn off, this only happens when I get out of sleep mode

  Apart from this, the fan works normanly turn on for a short time, when the temperature rises and then turn off again unless I wake up sleep mode windows.

  Hello

  You didn t show all details on the installed system. However, I think that its system related issue possibly some processes that run in the background constraints and to lock the CPU, causing a higher activity of the fan.

  It would be interesting to know if the same problem occurs with the help of a new OS installed.

• Firefox process is left running in memory after the release

  The firefox * 32 process remains running in memory after the release of Firefox. You cannot restart firefox without killing the process (ctrl-alt-delete...) or by restarting the computer.

  I'm running Windows 7 pro 64-bit and the Swedish version of Firefox 6.0.2.

  I did have this kind of problem with previous versions of Firefox.

  Firefox is already running but is not responding

  • https://support.Mozilla.com/en-us/KB/Firefox%20is%20already%20Running%20But%20is%20not%20responding

  Profile in use

  • http://KB.mozillazine.org/Profile_in_use

  Check and tell if its working.

• Update via subject: Firefox after the release date

  I noticed that in the latest versions of 4-6, after the official release date (for example today Firefox 38.0 was moved to release and pushed to free servers and for manual download on the site) as the day coming on: firefox does not update the program and said I use the latest version (37.0.2).

  Is there a reason for this?

  My guess: version stable/Adaptive QA in the case of a major bug
  -Tire due to an uncorrected critical vulnerability
  -Not overwhelming the server load
  -Help organizations deployment of delay of 1 day instead of trying to push several critical supplier updates every 2nd Tuesday of the month.

  I bet on the top 2 reasons.

  More information available on the subsequent restitution process after the release date? Is there a period of 1 to 2 days before the additional downloads are allowed via the built-in updater?

  • I read the timing of the release, but after the next day of the release date, there is no additional info provided

  Thank you in advance!

  fired 38 of Firefox version and updates are disabled for the time being to investigate and resolve some crashes on Windows and a version of Firefox 38.0.1 is underway and will be published in the next few days.

  You can continue to use Firefox 37.0.2 for now.

  • http://download.CDN.Mozilla.NET/pub/mozilla.org/Firefox/releases/37.0.2/Win32/en-us/

• [noob] Help understand why the event listener continues even after the withdrawal.

  Hey again,

  I'll try to do my best to explain. I can get this to work properly, but I'd like to understand why what I did before was not working.

  I have a little trouble understanding why an event listener continues listening to even after that I delete it. I have a facility where a Parent MovieClip ("CampScene") is established and an event listener is added to the look for a function ("walkUpToCampfire") to see if a condition is true ("comingFromAx is true", that won't be true until later).

  If it is true, an animation plays, an event listener is added to see if the animation is made and if it's an event listener is added to listen for a click ("campScene.goToAx") to a new animation to play and other events. (It won't be true until later.)

  If this isn't true (which is the situation that I work with at the start), the event listener said listening for a click on "campScene.goToAx" is implemented immediately. The function following removes the event listener, so it is supposed to stop listening to a click and let an animation play throughout.

  The problem is a continuous click to be listened to and if you keep clicking on the reboot of animation every time, which is what I don't want to happen.

  --------------------------------------

  I'm able to resolve the problem by adding the line "campScene.removeEventListener (Event.ENTER_FRAME, walkUpToCampfire)"; or in mouseEnabled affecting false for "campScene.goToAx", but I try to understand what is happening.

  It is, even if I'm deleting the listener ("campScene.goToAx") in a function ("goToAxScene"), "campScene.addEventListener (Event.ENTER_FRAME, walkUpToCampfire)"; continues to wait for a mouse click, unless it is removed also?

  Again, I am trying to understand how it works.

  --------------------------------------

  This should be all ACEs. Of course, I would like to know if you need more information. (I can post the FLA / AS files if need be.)

  public void practice_adventure8() {}

  ...

  initial event listeners

  addEventListener (Event.ENTER_FRAME, CampScene);

  }

  public void CampScene(event:Event) {}
  
  remove the event listener
  removeEventListener (Event.ENTER_FRAME, CampScene);
  
  Add the first camp scene
  campScene.x = - 120;
  campScene.y = - 10;
  addChild (campScene);
  setChildIndex (campScene, 0);
  
  Add the event listener to see if guys works with camp fire or not
  campScene.addEventListener (Event.ENTER_FRAME, walkUpToCampfire);
  
  }

  IF RETURNING TO CAMPSCENE
  public void walkUpToCampfire(event:Event) {}
  
  If the guy is walking back to axe
  If (comingFromAx == true) {}

  event listeners
  campScene.guyAtCampScene.gotoAndPlay ("guyComingFromAx");
  campScene.addEventListener (Event.ENTER_FRAME, ifGuyDoneWalking);
  
  otherwise if initial creation
  } else {}
  
  remove the old event listener
  campScene.removeEventListener (Event.ENTER_FRAME, walkUpToCampfire);
  
  trace ("comingFromAx = false");
  event listeners
  campScene.addEventListener (Event.ENTER_FRAME, sceneHoverInfo);
  campScene.goToAx.addEventListener (MouseEvent.MOUSE_UP, goToAxScene);
  campScene.goToBridge.addEventListener (MouseEvent.MOUSE_UP, goToBridgeScene);
  }
  }

  IF RETURNING TO CAMPSCENE FACT
  public void ifGuyDoneWalking(event:Event) {}
  
  If the guy ended up in foot
  If (campScene.guyAtCampScene.currentLabel == "guyAtCampSceneNormal") {}
  
  reset the Boolean values of scene
  comingFromAx = false;
  
  Add event listeners
  campScene.addEventListener (Event.ENTER_FRAME, sceneHoverInfo);
  campScene.goToAx.addEventListener (MouseEvent.MOUSE_UP, goToAxScene);
  
  }
  }

  GET READY FOR THE NEW SCENE

  public void goToAxScene(event:MouseEvent) {}
  
  delete movement event listeners
  campScene.goToAx.removeEventListener (MouseEvent.MOUSE_UP, goToAxScene);

  
  stop all sounds
  SoundMixer.stopAll ();
  
  play the clip of guy walking to AxScene
  campScene.guyAtCampScene.gotoAndPlay ("guyGoingToAx");
  
  check the label to see if axScene must appear
  campScene.guyAtCampScene.addEventListener (Event.ENTER_FRAME, addScene);
  }
  

  Your best bet to solve why things happen is to make use of the trace function.  In this case, you may have a trace run every time this listener can addedand any time it is deleted.  In this way, you should be able to see if it was added in after he deleted.  If there are several places where it is added, then adjust your tracks to indicate which line is involved as well.

• Since this morning updated (01/11), my policy is so tiny that I can't read anything. This, even after the DOUBLING of the size of my font in tools. Unless this is addressed, I can't use Firefox more, because I don't SEE anything.

  Since this morning updated (01/11), my policy is so tiny that I can't read anything. This, even after the DOUBLING of the size of my font in tools. Unless this is addressed, I can't use Firefox more, because I don't SEE anything.

  I tried NoSquint (looked simpler) and that did the trick... I am now back to where I was before this upgrade. Thank you.

• After the release of windows vista service Pack 2 and flash 10 my system continues to blue screen

  After the last update of windows vista service Pack 2 and flash 10 that my system continues to blue screen, the solution has advised windows that will fix it is to uninstall flash and reinstal, it dosent solution work any ideas? I tried to roll back to Flash 9 and it's less, but happens again... someone has any ideas?

  First, uninstall Flash to make sure that's not the problem.  If the problem persists and if the problem is related to the installation of Vista SP2 (as seems to be the case), then Support Microsoft offers free technical support for installation of Vista SP2 issues at: https://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034&st=1&wfxredirect=1&sd=gn.  They are experts on these issues and you should take advantage of the offer, although it is still free.  I'm sure they will be able to help you.  Minimize (but do not deny) the update of Flash and to focus on the installation of SP2 when you explain the problem.

  I hope this helps.  If this isn't the case, after return and we'll see what we can do.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Question of Bootcamp, even after the restoration process...

  Hello

  I still have this problem Bootcamp launch even after trying restore OS X via Internet and Time Machine

  Please can someone help me rebuild my disk of any merger manually?

  

  Here is my list under terminal diskutil:

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * TB 2.0 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_CoreStorage Macintosh HD 1.4 TB disk0s2

  3: disk0s3 Apple_Boot Recovery 650.0 MB HD

  4: EFI 104.9 MB disk0s4

  5: disk0s5 Apple_HFS UNTITLED 16.8 MB

  6: EFI No. 104.9 MB disk0s6 NAME

  7: Apple_HFS BOOTCAMP 543,5 GB disk0s7

  / dev/disk1 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 121,3 disk1

  1: EFI EFI 209.7 MB disk1s1

  2: disk1s2 Apple_CoreStorage Macintosh HD 121.0 GB

  3: disk1s3 Apple_Boot Boot OS X 134,2 MB

  / dev/disk2 (internal, virtual):

  #: NAME SIZE TYPE IDENTIFIER

  0: Apple_HFS Macintosh HD + 1.6 TB disk2

  Logical volume on disk1s2, disk0s2

  BFB9BB15-3247-48C4-A376-F329FBC563C3

  Fusion unencrypted drive

  Thanks a lot for your help

  Do you have a backup of Mac OS x Time machine?

  Please after the release of cs diskutil list.

• Shut down the PC after the release of the labview application.

  Dear friends,

  I want to make application in labview so that... when somebody will start PC this labview application should run. and PC shouldn't be able to do any other task instead of running the labview application. and PC should get the stop after the release of the application in labview. Please tell me how to do this.

  Kind regards

  Vijtin

  I think you're able to rebuild on a photo (I can't record to 7.0). If this isn't the case you take a Labview courses such as 'introduction to the introduction to the Labview programmers' and if you see in my first post to you, you will find the description of the shutdown command.

  

• Problem of scanning even after the use of HP print & scan doctor

  Hello

  I have printer HP Deskjet 2050 J510 which gives me an error message "scanner communication cannot be established. I had visited the HP support portal & downloaded HP print & scan doctor. After you run this tool, it is said that it cannot solve the problem. It detects the first two steps of pilot (or can be) Manager & pilot agreed. But in the third stage it gets stuck to the top (win scanning can be, even after the restaring the computer). I use 32-bit windows.

  It seems that HP can't valer'evne fix bugs in its own products. It's pathetic.

  A real quick help will be appreciated...

  Hi alb7039,

  Follow the steps below to update the software to the latest version.

  First step: clear temp directory

  1. tap folder in the race or search programs and files of field

  2 Select all the files in this folder, and then press the delete key to remove. If you receive a message that the file is in use, you will need to ignore this file (s).

  3. proceed to step 2 below

  Second step: downloaded and extracted to your system:

  1 download the drivers and full software features

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-79309-1&CC=US&DLC=en&LC=en&os=4063&Product=3635399&sw_lang=

  2. once the download is complete, double-click the file to extract the software.

  3. when the installation window opens, press the Cancel button to stop the installation

  4. tap folder in the race or search programs and files of field

  5. Locate and open the folder starting with 7z (example: 7zS2356)

  6. right click on the folder and select copy

  7. close this window and all open windows, and then in the Middle the desktop right click your mouse and select Paste. This will move the 7z folder on your desktop.

  8 open the 7z, that you just copied on your desktop

  9 open the Util folder

  10 open the CCC folder

  11 start the uninstall_L4

  12. once the uninstall is complete, restart the computer

  13. run disk cleanup from the tools Accessories\ system under all programs folder

  14. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  15 open the 7z folder and then double-click the Setup.exe file that will be towards the bottom of the open window. Follow the instructions on the screen to reinstall your printer.

  Let me know what you find?

• HP Director launch even after the installation of the updated software. HP Officejet 5510.

  Problem launching HPdirector even after the installation of the updated driver.  Also not scan; message machine wants software installed.  Did not have this right?

  Any ideas?

  [Personal information]

  Hello drudgedread

  Follow the steps below and let me know what happens? These instructions will be clean your temporary folder (a folder that contains temporary data such as data configuration / installation) and rub the printer software with the most recent uninstall.bat utility for your printer.

  First step: clear temp directory
  Type %temp% term or search programs and files of field
  Select all the files in this folder, and then press the delete key to remove. If you receive a message that the file is in use, you will need to ignore this file (s).
  Proceed to step 2 below
  Second step: downloaded and extracted to your system:
  1 download the drivers and full software features
  Complete features Officejet 5510 software
  2. once the download is complete, double-click the file to extract the software.
  3. when the installation window opens, press the Cancel button to stop the installation
  4. tap folder in the race or search programs and files of field
  5. Locate and open the folder starting with 7z (example: 7zS2356)
  6. right click on the folder and select copy
  7. close this window and all open windows, and then in the Middle the desktop right click your mouse and select Paste. This will move the 7z folder on your desktop.
  8 open the 7z, that you just copied on your desktop
  9 open the Util folder
  10 open the CCC folder
  11 start the uninstall_L4
  12. once the uninstall is complete, restart the computer
  13. run disk cleanup from the tools Accessories\ system under all programs folder
  14. download and install the latest version of Adobe flash player
  Adobe Flash Player
  15 open the 7z folder and then double-click the Setup.exe file that will be towards the bottom of the open window. Follow the instructions on the screen to reinstall your printer.

  Let me know if you are able to successfully install the software and driver and are able to print & scan? Also, if there are errors or messages just them down and let me know.

• I CAN QUERY A TABLE EVEN AFTER THE DELETION OF THE DATA FILE

  Hello

  Can someone explain to me the reason why I am able to interview some tables even after the deletion of the data that are associated with file?

  SQL > select table_name, tablespace_name from dba_tables where owner = 'SCOTT ';

  TABLE_NAME, TABLESPACE_NAME

  ------------------------------ ------------------------------

  TEST2 USERS

  TEST USERS

  SALGRADE USERS

  USERS OF BONUS

  USERS OF THE EMP

  USERS OF DEPT

  6 selected lines.

  SQL > exit

  Disconnected from the database to Oracle 11 g Enterprise Edition Release 11.2.0.1.0 - Production

  With partitioning, OLAP, Data Mining and Real Application Testing options

  [oracle@localhost orcl] $ rm /app/oracle/oradata/orcl/users01.dbf

  [oracle@localhost orcl] $ sqlplus scott/scott

  SQL * more: Production version 11.2.0.1.0 on Mon Mar 30 21:35:54 2015

  Copyright (c) 1982, 2009, Oracle.  All rights reserved.

  Connected to:

  Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production

  With partitioning, OLAP, Data Mining and Real Application Testing options

  SQL > select count (*) from test2;

  Select count (*) from test2

  *

  ERROR on line 1:

  ORA-01116: error opening the database file 4

  ORA-01110: data file 4: ' / app/oracle/oradata/orcl/users01.dbf'

  ORA-27041: could not open the file

  Linux error: 2: no such file or directory

  Additional information: 3

  SQL > select count (*) of the test;

  COUNT (*)

  ----------

  5000

  SQL >

  The first output is as expected. But why am I still able to query the table of test, even if the data file has been deleted.

  Hello

  The process of database have a file handle for the data file - this remains even when the file is deleted (it disappears from the normal file system navigation)

  You can see if you have lsof installed

  just try

  lsof | grep datafile_name

  Once the database is restarted and the released file handle so you will not be able to do this any more - and in fact you will get errors when it can't find the file.

  See you soon,.

  Rich

• The host has not enough space on the boot partition to store the image upgrade. It takes a minimum of size_in_MB. After the release of space or perform an installation from the CD-ROM.

  Hi everyone, the difficulties in trying to update the Update Manager. ESX4.1 to ESXi5.0

  Error I get is below to correct the scan before update:

  The host has not enough space on the boot partition to store the image upgrade. A minimum of 299MB is necessary. After the release of space or perform an installation from the CD-ROM.

  There is enough space in the local disk

  Size of filesystem used Avail use % mounted on
  / dev/sdd5 4.9 G 1.6 G 3.0 G 35%.
  / dev/sdd2 2.0 G 107 M 1.8 G 6% / var/log
  / dev/CCISS/c0d0p1 99 M 67 M 27 M 72% / Boot
  / dev/CCISS/c0d0p2 4.9 G 1.6 G 3.1 G 34% / esx3-installation
  / dev/CCISS/c0d0p1 99 M 67 M 27 M 72% / esx3-installation/boot
  / dev/CCISS/c0d0p7 2.0 G 101 M 1.8 G 6% / esx3-installation/var/log

  Cannot continue installation due to the lack of space and don't have the option upgrade CD directly (of complicated issues)

  Do you have any suggestions?

  Thank you

  It sounds like this host has already been improved 3.x! In this case you will not be able to upgrade to 5.x using the Manager to update because of the small partition/boot (99 MB).

  to remedy the hosts against a basic upgrade

  ... You cannot use Update Manager to upgrade to 5.0 ESXi host, if the host has upgraded ESX 3.x to ESX 4.x. These hosts have not enough free space in the partition/Boot to support the process of update Update Manager. Use either interactive or scripted upgrade.

  André