Firefox crashes constantly. I have restart firefox. It does not work. I restart the pc and then reopen firefox. It's still freezing?

Similar Questions

• In the United States, I can use selector locale quick to get U.S. locale of Russia but in Russia, it does not work to go the other way or any other premises than elsewhere. After selecting a new language and restarting firefox, it remains on the Russian

  In the United States, I can use selector locale quick to get us to the locale of Russia (ru - RU), but in Russia, it does not work to go the other way or any other premises than elsewhere. After you have selected the local new and restart firefox, it remains on the Russian locale. Y at - it a fix for this problem?

  This has happened

  Each time Firefox opened

  == Looks like it started with a newer version of firefox, but this may have been coicidental

  You have other language packs languages installed?
  Tools > Modules > languages

  There is no module language en-US, to achieve that you must install the version of Firefox en-US and install other languages in the version.
  http://releases.Mozilla.org/pub/mozilla.org/Firefox/releases/3.6.6/Win32/XPI/

  See also http://kb.mozillazine.org/Language_packs

• Error "Windows Setup cannot continue. To install windows, click ok to restart the computer, and then restart the installation. "When you try to install Windows.

  How can I configure my windows 7 after restoring my laptop to the factory conditians?

  My laptop had a blue screen and I couldn't get rid of it, I went into safe mode and restore my computer to factory conditions. When the computer says "the installation program starts services" you stop and I couldn't turn it back on for 15 minutes. When I turned on and tried to contained my setup, a message keeps poping up "the computer restarted unexpectedly or encountered an unexpected error." Windows Setup cannot continue. To install windows, click ok to restart the computer, and then restart the installation. "But no mader, how many times I reboot my laptop, the same message appears. What should I do? I've restored my computer several times and never had this problem.

  You should try another recovery.

  New computers coming often pre-installed with Windows 7 have what is called a recovery partition. This is used to reinstall an operating system in the case of a system failure. To access it, you need to start when you start your computer by pressing a function key. This can be either F1, F2, F9, F10, F11, F12 key DEL or tab. See the manual that came with your PC for instructions on how to reinstall Windows.

  If your recovery partition is not available or damaged, you must contact the manufacturer of your computer, and request that a defined recovery disk you can use to reinstall Windows 7. They could practice a small shipping and handling.

• I bought adobe photoshop elements13 & adobe first elments 13 and it keeps out error tells me to restart the computer, and then try to reinstall and it keeps it doing so. How to download or do I return to the store and make it

  I bought adobe photoshop elements13 & adobe first elments 13 and it keeps out error tells me to restart the computer, and then try to reinstall and it keeps it doing so. How to download or I have to take back to the store and ask them to help me.

  You try to download at the bottom of link?

  Download Photoshop Elements | 10, 11, 12, 13

  Or are you any error messages during launch or installation?  If so, post the exact error message.

• I upgraded to Keynote 6.0 and now have a new logo to Keynote 6.0 in my Dock and a Keynote 5.0 Logo in the Dock. Tried to drag the logo 5.0 on the dock does not work according to the instructions. Comments?

  I upgraded to Keynote 6.0 and now have a new logo to Keynote 6.0 in my Dock and a Keynote 5.0 Logo in the Dock. Tried to drag the logo 5.0 on the dock does not work according to the instructions. Comments?

  If you have any documents open in Keynote 5 then you will not be able to drag it to your Dock. IF a right-(control) - click the Keynote icon 5 shows Quit in the drop - down and then select Exit. Now you should be able to slide your dock.

  It is often necessary to drag it from the dock, drag the icon quite some distance from the dock (to what the REMOVAL appears on the icon).

  You can also right-(control) - click the icon select Options, and then, in select Options remove the dock.

• installed vista by mistake and now I have my product key does not work

  ORIGINAL TITLE: HELP PLEASE

  I had my hard drive wiped clear windows xp a friends vista installed by mistake and now I have my product key does not work what do I do? Help, please

  Two options

  But a vista license or re - install XP

• Windows vista installation interrupted, click OK to restart the computer, and then restart the installation

  I was doing a reformat of the factory for windows vista on the laptop of my son (packard bell EasyNote LJ 65) when the battery is dead and the computer turned off. When I started it back up it gives the message: the computer restarted unexpectedly or encountered an unexpected error. Windows Setup cannot continue. To install Windows, click OK to restart the computer, and then restart the installation.
  Everything I try, I get no further than this message, I don't know where to go to continue the installation. The computer does not see that the installation was not completed. I tried to enter the menu with F9 where I had to do the reformatting of the factory of windows but it will not give me the option to continue installation, it shows just the vista Windows, but when I click brings back me to the error message
  Help, please!

  http://support.PackardBell.com/UK/

  For questions about the recovery process, contact the manufacturer of the computer.

  This isn't their recovery process, Microsoft.

  See you soon. Mick Murphy - Microsoft partner

• Hi, I have installed sqldeveloper - 4.0.3.16.84 - x 64 with JDK and tried to run SQLDeveloper.exe its does not work. A flash comes and goes. It worked fine until two days ago. Don't know what happened all of a sudden its not working. Need help.

  Hi, I have installed sqldeveloper - 4.0.3.16.84 - x 64 with JDK and tried to run SQLDeveloper.exe its does not work. A flash comes and goes. It worked fine until two days ago. Don't know what happened all of a sudden its not working. Need help.

  I use Windows 7 Pro.

  I have read other threads and tried to launch SQLDeveloper.exe from the CMD prompt, nothing is shown a flash comes and goes.

  Tried to change of SetJavaHome sqldeveloper.conf to the path JDK that it didn't work.

  Please guide me.

  Thank you

  Maybe there is a problem with SQL Developer, being able to write to the network share of desktop directory.  Add the following to your sqldeveloper.conf file to force the settings of the user to store locally also:

  AddVMOption - Dide.user.dir = some_local_dir_to_own_system4.0.3.16.84

  I hope this helps...

• I don't know how I can attach files and photos, but now hotmail does not work, click on attach ways and nothing happens, I use hotmail, firefox, vista, hp. Please help me

  but now Hotmail does not work, I can't join because the browser will not open click on attach ways and nothing happens, I use hotmail, firefox, vista, hp. Please help me

  Hello

  for Firefox questions, ask in their forums:

  http://support.Mozilla.com/en-us/forums

  _____________________________________________________

  Hotmail questions:

  I'm sorry, but we cannot help with hotmail problems in these forums in response to vista

  Please repost your question in hotmail in the hotmail link below forums

  http://windowslivehelp.com/product.aspx?ProductID=1

  Forums

  E-mail client and the appliance issues

  Hotmail Sign In questions

  Lost or deleted emails

  People and Contacts

  Reading, writing, and formatting mail

  Sending and receiving mail

  Sign in, and sign to the top and account security

  Using the Hotmail calendar

  Using Web Messenger

   

   

  Consult with Microsoft Certified Solutions

  How to work the views Active Hotmail?

  Your account has been temporarily blocked

  What to do if you can't connect to Windows Live Hotmail

  Compromised account - unauthorized account access

  Reset your Windows Live ID password

  Error when you try to send an e-mail: your message seems to have triggered our spam filters.

  Change your Windows Live ID password

   

  ____________________________________________

   

   

  Welcome to Windows Live Solution Center

  http://windowslivehelp.com/

• Firefox does not work after all, uninstall them and reinstall.

  Very few of the buttons are used in the firefox menu. Add ons will not open the Manager. None of the buttons on the open Help menu, open only a few menu options. Does not work in safe mode. I completely uninstalled, went into effect the deleted data from the preferences file. Reinstalled several times and nothing... Kind of frustrating. Any ideas?

  In case someone else runs into this I thought about it. I had to remove the program, remove the Preferences folder in Appdata, then click on registry local machine > software > mozilla and then delete the registry keys. There are three folders, I don't remember the exact name, but they all began with Mozilla. Once I did, I rebooted and reinstalled. Now it works...

• I have acidently deleted my eviroment. now I can not install anything or change my settings in my control panel. Msconfig does not work this is the messege I get: the system cannot find the environment that was entered

  I have acidently deleted my eviroment. now I can not install anything or change my settings in my control panel. Msconfig does not work. Cannot change network settings. This is the messege I get: the system cannot find the environment that was entered

  Hi kotipelto.

  To better understand the issue, we need the following information:

  Are what environment you referring?  What did you delete?

  Let us know if you can start the computer in safe mode and works as expected.

  Access the menu advanced startup options by turning on your computer and pressing the F8 key before Windows starts. Boot advanced options, select the menu safe mode.

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  If you can start the computer in safe mode, perform the system restore.

  System Restore: System Restore to put the computer's system files to an earlier point in time.

  Search the steps mentioned in the link below:
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-sytem-restore

   

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Restart-VMHost does not work after unplug the vCenter

  Hello

  Hope someone can help me with this.

  The restart-VMHost does not work in my script. The output says vCenter connection error is required by the current operation. The connection does not exist, perhaps because it was actively closed or expired.

  What I try to achieve in the next script is all virtual machines stop and then restart the host. Since the vCenter is a virtual machine that needs to be stopped. If the script connects to each guests instead of vCenter

  SE connect-VIServer-get server #to "vcenter01", a list of hosts before stopping the vCenter
  $hostlist = get-VMHost
  Disconnect-VIServer *-confirm: $false

  {foreach ($string in $hostlist)
  SE connect-VIserver-server $string - user 'root' - password "abcd".
  }

  $vmlist = get - VM
  

  {Foreach ($vm to $vmlist)
  write-host 'Shutting down $vm' - blue BackgroundColor - ForegroundColor white
  $vm | Stop-VMGuest-confirm: $false
  }

  Sleep 10

  {foreach ($path in $hostlist)

  Restart-VMHost $path - force - confirm: $false
  write-host "$path restart" - blue BackgroundColor - ForegroundColor white
  }

  I suspect that the message could be caused by the parameter that you pass to the Restart-VMHost cmdlet.

  You use the retrieved by Get-VMHost VMHost object when you are connected to the vCenter.

  You can try this part of the code as follows

  ....

  {foreach ($path in $hostlist)

  Restart-VMHost $path. Name - force - confirm: $false
  write-host "$path restart" - blue BackgroundColor - ForegroundColor white
  }

• After update Windows 7, have to reinstall firefox 26, session restore button is available but does not work even if the sessionstore file is there

  I am running Firefox on Windows 7 26. Last Windows necessary to make some updates to safety, the night I closed Firefox I normally do it, use the tab out and let windows to go forward with its updates. This morning I found that Firefox has been removed. I tried to find out that my last night sessionstore.js file still exists and it does. When Firefox came all my tabs have disappeared, also my favorites, modules, etc. I clicked on "restore previous session", but nothing happens. I have a file of last night bookmarks in the bookmarks folder, and the file sessionstore.js is dated last night when I closed Firefox in a normal manner. I'm puzzled. Firefox didn't fail, I closed it as I always do before that I have authorized Microsoft Windows Update and restart. Who am I lack/hurt? I leave this open session so that I can continue to have access to this file sessionstore, as I have it copied in a folder that I use for this kind of disaster. This windows necessary also deleted my MailWasher Pro program update, changed how the Windows Explorer and more 'fun '. Thank you, Microsoft. It is barely possible that I can recreate my tabs and it would be extremely aggravating, but I have no way to re-create all my favorites. I need help.

  Hello
  If you have not closed since the last time that you can type in "subject: sessionrestore ' on the page and there should be a list of tabs from last time. If this consistantly come please see the history on open gint settin settingand

  Firefox > General Options-> view my tabs from last time
  Privacy > history

  Have these options will prevent tabs away, after the browser is closed.

  Please let me know if this does not resolve the question of restoration session being closed. We can help if it is touched by a plug-in by starting the browser in safe mode.

• xdg-open does not take into account the url and opens the different website when Firefox is the default browser in Ubuntu

  I am running Ubuntu 14.04 64 bit with Firefox version 38 for Ubuntu
  It is complected, and I tried to explain everything clearly.

  Today, I noticed a strange behavior.
  I have several URL saved as .desktop files.

  I use webupd8.org as example.
  The code for the exec in the desktop file is:
  Code:

  Exec=xdg-open http://www.webupd8.org/
  

  Today, I noticed that if I try to go to webupd8.org, or most of the other sites, by launching the .desktop file for this site, or by typing the url
  Code:

  http://www.WebUpd8.org/

  in the dashboard Firefox opens to a completely different site. The site that opens is a site that I set up for my children's grandparents to watch videos and see photos of the children. This Web site opens each time. I'm not be directed to a site at random each time. This is the case when I try to visit the webupd8.org OR one of several websites using .desktop file or enter the url you want in the dashboard. Whenever I went to my own domain.

  It happens that I have also several sites registered in a reminder in the Firefox icon in the Launcher sidebar thing in Ubuntu.
  In the case of the beast, the exec code is slightly different and it still responds as it should. In this case, I have:
  Code:

  Exec = firefox-new-tab http://www.webupd8.org/

  Also, if I change my default in opera browser, for example as .desktop files and entering the url directly in the dashboard work as it should.

  To recap:

  When Firefox is the default browser, enter a url in the dashboard or use a to surf to a desired site .desktop file causes my be redirected to my own domain name (which is hosted remotely and not on this computer).

  If, however, I change the Exec command in the .desktop file
  Code:

  Exec=xdg-open <url>
  

  TO
  Code:

  Exec = firefox-new-tab < url >

  the .desktop file will open Firefox and go to the desired site.

  If I change the browser by default Firefox to another browser, everything works as it should and has always so far. That is, with the Opera for example, both
  Code:

  Exec=xdg-open <url>
  

  and
  Code:

  Exec = firefox-new-tab < url >

  result in the browser by opening and going on the planned site. Typed a url in the dashboard is not a problem if the default browser is not Firefox.

  Anyone seen this before? If so, how to solve it?

  Thank you very much for your answers!
  I checked the url of the home page in Firefox and it has been set at startpage.com, but then when I looked at the default programs in Ubuntu, I noticed that the default program for the web had been unintentionally configured to use a .desktop file that leads to t he admin for my Web site login page.

  I changed this back to Firefox and the problem was solved.

• My firefox does not work llook like the most recent version. I downloaded it on my aunts comp and in the corner upper lft, there's a firefox orange box but still just mine has firefox symbol.

  I had firefox for over a year and I recently installed on my computer of aunts. When I've done in the upper left corner, there was an orange box that says firefox on it. I have recently installed on my computer and it's always the same, as I had before. (Just the symbol of firefox) How can I get the latest version? It does not say I have the 6.2 or what is the most recent. Thank you in advance for the quick response to my question.

                                      Amy Vitko
  

  The current stable version is Firefox 6. 0.2

  https://support.Mozilla.com/en-us/KB/how-do-i-get-Firefox-button
  Why can't I see it?

  To make Firefox look like other programs in Windows XP, the menu bar is displayed instead of the Firefox button, while under Windows Vista and Windows 7, the button is displayed by default in Firefox.