Firefox crashes: does not start in any profile

Similar Questions

• Firefox Pei does not start the Profile Manager. Firefox version: 50.0

  Firefox Pei does not start the Profile Manager. Firefox version: 50.0

  Have you tried; Type of topic: profiles in the address bar.

• my computer told me to repair windows.and everytime I try I get a blue screen. It does not start in any mode without failure. I just get a blue screen. Thany you shane

  whenever I try to start my computer .a blue screen come often does not start in any of the modes security .He told me to repair windows recommended. can't do recovery or what he can be.wont start in safety mode.what can I do .thank you. Leonard.

  Hi leonardhurley,

  Since when are you facing this problem?

  You did changes before this problem occurs?

  What is the exact blue screen error message you received?

  Method 1

  I suggest that you perform the last good known Configuration

  http://Windows.Microsoft.com/en-us/Windows-Vista/using-last-known-good-configuration

  Method 2: disable automatic reboot in order to collect the Blue error screen, so in case the blue screen just flashes and dries on.

  Method 3:

  I suggest you to follow the article below for the Blue error screen.

  http://support.Microsoft.com/kb/958233/en-us

• TC - 705 crashed. does not start. error message

  My sucks TC-705 crashed.  It does not start.  error message saying lack driver DVD player.  At the beginning I was not too worried because my recovery is on a USB key.  He went through the installation process, but the re-boot did it again.  Endless loop.  I tried all repair options without success.  I went to the command prompt and run the scan and repair.  Scanned very well, she could not make the repairs.  If nothing worked the hard drive may be damaged, said a source online.  I put a new disc in, but there was no improvement.

  Where should I go from here?

  Ironfly,

  I downloaded vanilla but after I extracted it I could not make heads or tails of it.  The Readme went on and on the forums running with it but not said me something about how to launch it.  I have a question on how to launch online, but the first statement, I had was to open my WOW file.  I knew then that I had wandered in some elses universe.  After reading more later, I realized that he was playing.

  All of this is moot right now because my DVD drive and all my usb ports are dead.  There is nowhere where ever I go except in the bios.

  At this point, I don't think that there is nothing I can do.  The computer is still under warranty and I have a one year protection plan so I'll let Newegg and Acer deal with reclamation.

  I wish I could give you a hundred Bravo for all your efforts.  Thank you and all those who participated.

  unktim

• I installed jZip, it crashed Firefox and does not start again; How can I get Firefox to work once again, preferably without uninstalling?

  I installed jZip and it crashed Firefox, I tried to restart Firefox, but it wouldn't. I uninstalled jZip, Firefox didn't work; I restarted the computer and it still does not work. I can't use even run Windows to pull up the profiles. Is there something I can do to get Firefox to work again without reinstalling? I really like to use the session restore but its so erased its uninstalled.

  Yes to aid,

  Start > Search > firefox.exe /ProfileManager {ENTER}

  I got to the profiles.

  I'm fed up and uninstalled Firefox, when he asked if I wanted to erase all data associated with Firefox I did not and when I reinstalled it straight last session here, I assume that this sort of program file has been damaged and has stopped working. Put it back, fixed everything that was wrong.

• Have done everything I can think of. Firefox (Mac) does not start PERIOD! Read all messages and FAQ

  Nothing works. Cannot find the profile anywhere. Have uninstalled and reinstalled a dozen times. My drive is fine. Was working earlier today. I changed the privacy settings to erase everything once I close FF. This is when he started to hang. It will not reset or do anything all she is unresponsive. Help, please. Mac 10.8.4

  No, it is not distinct from regular firefox, you must download and install firefox again, then try the method of Profile Manager.

  • How to download and install Firefox on Mac

• Blue error screen 0 x 00000024 on Win XP Home SvcPK 3. CMP does not start in any mode. BIOS is fine. Surfact of drive test came out negative.

  Here is the full error:

  Stop: 0 x 00000024 (0 x 00190203, 0x88bc3390, 0xc0000102, 0x00000000)

  Whenever the machine is restarted, ^ this number above changes of carrot. all others remain the same.

  BIOS load properly and detect all need too.

  have you tried the following:

  I tried every avaible selection:
  Safe mode
  Safe mode with networking
  Safe mode with CMD
  Last known configuration
  Start WIndows normally
  Select VGA
  Enable Boot logging
  Disable the automatic restart in the event of system failure

  Debug mode
  Directory Services restore Mode

  Recovery Console

  .. .and when I than windows loading screen, I'm going in the restart of the bearing. When starting in safe mode, the list of pilots begins to scroll and always stops in the AVGIDSEH.sys

  System:

  Toshiba Satellite A-75

  WIndows XP Home Edition
  Fully updated with Svc Pk 3
  HITACHI Travelstar hard drive 80 gig

  History:

  When the first blue screen hit a week ago, I immediately rebooted in safe mode (windows always loaded then) and conducted an audit by virus with AVG. Then, I updated my Zone Alarm Firewall to the latest version and restarted. There was no sign of the problems that were to come. The next day, I did a little research to see that this error 0 x 00000024 indicates a corrupted registry or the NTFS loader file, among other things. Recommendations included disabling antivirus and programs bad-ware like Ad-Aware, or recently installed programs whose drivers may be at fault. I proceeded to the services.msc and disabled ZoneAlarm both AdAware, then restart. Windows has not been loaded since then this stop only error message I get now.

  I did a test of surface of disc with a utility of the UBCD and negative (found no errors) so I guess that the disk is physically very well. Also, re-installed memory that shows no sign of physical goods or damage.

  The laptop is a Toshiba Satellite and the folks at Toshiba have no respect for my data. They continue with option 1... Re-install windows. I'm not surprised that in the past they have never really been useful and stood by their products, that's why all the customer complaints.

  First of all I need a program utility loader initialization that will allow me to run chkdsk as diagnostic utilities. Please offer your expertise in this area.

  First, start in the XP Recovery Console and running a chkdsk/r.

  The question was preceded by a loss of power, aborted reboot or abnormal termination? (This includes the plug pulling, buttons power and removing the battery).

  These can cause corruption in the file system that must be fixed before you do anything else.

  If none of these events occurred (or even if they have not taken place), you must verify the integrity of your file system before anything else (especially "try" things).

  There is zero logic to begin to try to begin to try to modify or copy files to a hard drive that has a corrupted file system, so this must first be fixed using the XP chkdsk program and run chkdsk on your hard drives may solve your problem completely.

  Use the XP Recovery Console to check the file system on your HARD drive and fix the problems and then try to start your system - this may be all you need to do.  Or, you are welcome to just start trying things that might work.

  Boot into the Recovery Console Windows using an XP bootable installation CD.

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

• Windows XP Professional does not start in any mode

  I have a Dell Latitude D610 & I got it in 2005. Its operation under Windows XP service pack 3 & I do not have all disks is it came with.

  I recently received a security update that I got about 15 files corrupt on the laptop, when I went to check what they where I noticed I had to reactivate or buy the license for the software security so I thought I would like to remove this security software that was on it & replace it with the free version of AVG that I use on my home computer.

  I could not remove security software that I think Microsoft is up so I tried to install the AVG software in any case. The laptop would not download AVG completely, so I tried to manually remove the files that were corrupted.

  Now realizing that it was a mistake, because my laptop won't turn on, show the DELL page & then I see is a black screen, no errors or messages.

  I tried & brings me to the Blue & gray setup page, there is a list of folders as follows, most which have a list of the subfolders:

  System

  Onboard devices

  Video

  Security

  Power management

  Maintenance

  Docking station

  Behavior of PUBLICATION

  Wireless

  I tried & I can see the black & white boot which reads options page:

  Use the arrow keys up and down to move the pointer to the desired boot device. Press [Enter] to boot or ESC to cancel.

  Internal HARD drive

  CD/DVD/CD-RW drive

  Bus card NIC

  Integrated NETWORK interface

  BIOS Setup

  Diagnosis

  I tried & I can see black & advanced options menu white page which reads:

  Windows Advanced Options menu

  Please select an option:

  Safe mode

  Safe mode with networking

  Safe mode with command prompt

  Enable Boot logging

  Enable VGA Mode

  Last good Configuration known (your most recent settings that worked)

  Directory Services Restore Mode (Windows controllers only)

  Debug mode

  Disable the automatic restart in the event of system failure

  Start Windows normally

  Reset

  Return to OS Choices Menu

  Use top and down arrow keys to move to the highest of your choice

  (None of these options work for me)

  I also have triedpressing and and then by pressing . Then release both buttons at the same time. It doesn't matter, I thought it would allow me to do a restore on the laptop.

  Any advice would be great?

  You can try to run the CD created by one of those AV programs and see if that takes care of it, but I am not confident anything but a clean install will help at this point:

  http://www.techmixer.com/free-bootable-antivirus-rescue-CDs-download-list/
  -SC Tom
  -There is no such thing as TMI if you request technical support.

• When I open firefox, it does not start on my home page, but on a search page, I never intentionally downloaded and uninstalled from my computer. Why?

  Today, I had a lot of trouble with my computer. I think that he was attacked by something underhanded, but I managed to stop it and fix everything. Everything about this thing.

  When I open the firefox browser, it will not automatically to my home page, despite having followed all the instructions to do this. Instead, it opens in an engine search called 'awesomehp' that, previously, never heard and never installed. When I click on the 'home' - button, it goes to my real home page, and everything is ok.

  I tried to uninstall it... "awesomehp" engine of research, but it ALWAYS appears automatically when I open FireFox. Why? And this is even after I have reset FireFox settings by default once.

  Why this happens, and what can I do about it?

  Looks like you picked up a pirate of the page. See this for help to get rid of it:
  
  http://www.bleepingcomputer.com/virus-removal/remove-awesomehp.com-browser-hijacker

• Windows Vista does not start in any mode

  Okay, a month ago I lost power to my computer. When the power came back my computer would normally charge, but after the vista loading screen went the screen would remain just black.

  I loaded to the top of vista in safe mode and it worked for about 5 minutes, and then he said something about an error with the index then restarted itself.

  now I can't boot the system in any safe mode, run restore partion.

  I tried myltiple iso inages disc online including gateway recovery, windows startup repair, windows recovery, the diskette of starting windows and nothing seems to work.

  When I try to boot my pc in safe mode it hangs up on crcdisk.sys.

  At this point, I am open for review. I have a laptop that I can make records or whatever I have to do I just need to know what to do about it.

  http://support.gateway.com/s/software/MICROSOF/Vista/7515418/7515418asi.shtml

  Gateway Vista recovery info at the link above.

  http://support.gateway.com/s/software/MICROSOF/Vista/7515418/7515418su539.shtml

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Have you changed the boot order before trying to boot from disk:

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.gateway.com/support/default.aspx

  At this point, if all else fails, contact Gateway, as is their recovery process.

  Power outages can often damage material...

  See you soon.

  Mick Murphy - Microsoft partner

• After my computer will crash does not start has a black screen with message operating system not found. Responsible for recovery disc but wont start.

  not boot Vista after that computer crashed have a black screen with message operating system not found.recovery discs won't load

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  Above is the way you normally boot from the Vista recovery disks.

  If you have tried to boot from the recovery without success disks, contact the manufacturer of your computer.

  This isn't their recovery process, Microsoft.

  See you soon,.

  Mick Murphy - Microsoft partner

• XP does not start in any mode after update.

  No blue screen. Loop continues attempts to start.

  [Duplicate of http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/9ec0baff-5d84-4daf-8766-867bc77e34fd] ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Firefox does not start, no error message, only works in the background

  I click on Firefox it does not start
  no error message it does not start
  It works in the background in 32-bit
  I have re installed it but nothing changes

  It is possible that your security (firewall, antivirus) software blocks or limit Firefox or the process of plugin-container without you inform, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox and the plugin-container in the permissions list in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.org/KB/server+not+found
  • https://support.Mozilla.org/KB/firewalls
  • https://support.Mozilla.org/KB/fix-problems-connecting-websites-after-updating

• Bluetooth support service does not start on VISTA

  When I go into the Services Panel it shows of Support Bluetooth Service is set to automatic but not started. When I try to start this service, it gives me error: 1053 indicating that the service has failed within a reasonable time. I have a MX5500 Revolution keyboard and mouse combo that works very well. But when I try to put the mini hub so he could accept the other BT devices, it hangs, freezes or crashes. I tried to uninstall and reinstall the software several times with no luck. I know that the reason that this happens, it's the BT support service does not start. Any help is appreciated.

  Hello

  Hardware devices not detected or does not work - a Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  The problems with Bluetooth devices
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

  Set up a Bluetooth compatible device
  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device

  The problems with Bluetooth devices
  http://207.46.197.98/Windows/en-in/help/11a74104-645D-40D4-b933-bde5d15537bb1033.mspx

  How to set up a Bluetooth connection
  http://www.vista4beginners.com/how-to-setup-a-Bluetooth-connection

  The Bluetooth item in Control Panel on a Windows Vista SP2 computer does not work as expected
  When you click on the element - for Windows 7 this check manually
  http://support.Microsoft.com/kb/960531/en-us

  If you need drivers try the support site for the manufacturer of your system and/or the site of the manufacturer of the real device.

  BluetoothView is a small utility that runs in the background and monitor the activity of Bluetooth technology
  devices around you. For each detected Bluetooth device, it displays the following information:
  The device name, address Bluetooth, Major Device Type, minor device Type, first detection time,
  Last detection time and more. BluetoothView can also warn when a new Bluetooth device
  is detected, by displaying a balloon in your bar tasks or playing a little beep. -FREEhttp://www.nirsoft.net/utils/bluetooth_viewer.html

  BluetoothCL is a small console application that transforms all differential of bluetooth devices detected in
  the standard output. For each Bluetooth device, the following information is displayed: MAC
  Address, name, Major Device Type, minor device Type and possibly the name of the company of
  the device (if the external file of MAC addresses - oui.txt is provided) - FREE
  http://www.NirSoft.NET/utils/bluetoothcl.html

  ---------------------------------------------------------------------

  More information of possible interest to some:

  What is a Bluetooth personal area network (PAN) network?
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-a-Bluetooth-personal-area-network-Pan

  Connect to a Bluetooth personal area network (PAN) network
  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-to-a-Bluetooth-personal-area-network-Pan

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Adobe Bridge CS6 does not start.

  Adobe Bridge CS6 does not start. I installed it in Photoshop CS6, but Bridge does not start in my profile of 'owner '. (Photoshop works very well). However, when the reinstalled via a new profile of the administrator, bridge works. Any ideas why it won't work in the profile owner? Any suggestions on how to solve the problem? Support Adobe says it's a problem with Windows 7, but there is speculation on the Web that this is due to the installation of Bridge CS6 while Bridge CS2 remains installed on the PC.

  Found the answer - go - go to the process - task manager find Bridge cs6 - click on end process. Bridge works now - I need to do this each time that... (win 7 64 bit) :)