Firefox crashes until he could start up, can not even in safe mode.

Similar Questions

• Windows xp does not start, I can't even in safe mode. I Mindprint just a black screen with the mouse arrow. What can I do

  Windows xp does not start, I can't even in safe mode. I just get a black screen with the mouse arrow. What can I do

  Hello

  1 did you changes to the computer before the show?

  You can try the troubleshooting provided in the link below steps to fix the problem.

  Computer stops responding with a black screen when you start Windows XP

  http://support.Microsoft.com/kb/314503

• Windows xp does not start, I can't even in safe mode. I just get a black screen with the mouse arrow. What can I do

  Windows xp does not start, I can't even in safe mode. I just get a black screen with the mouse arrow. What can I do

  You have all the features non-essential related to the machine?
  Have you installed a new hardware or software recently?

  Try to do a repair install and see if it corrects the problem.

  How to perform a Windows XP repair install

• HP Pavilion Desktop Window Vista ultimate 64-bit. Failed to start. Can not put in safe mode, cannot restore the system.

  HP vista ultimate: commissioning can not repair computer: Signature of the problem, Startup Repair v2; ongoing state: the disc problem signing 01:system; 02: 6.0.6001.18000.6.0.6001.18000 04:196611 03:05 6: registry corrupted 06: no causes 07:0 08:2 09:WrpRepair cause of root of ID:1033 local 10:0 found: c0000218 Bugcheck. papameters = 0x9046cc98, 0 x 0 0 x 0 0 x 0 Action required: System Restore. Result: Failure error code: 0 x 490 of this office that I bought as recently used pc, I have No Boot up, recovery disks. Please can someone advise? »

  I think that some malware has been inadvertently downloaded and deleted the entry of game and ran anti-virus and found no malicious software, again, I think that this has caused the problem I have now.

  Any advice appreciated,

  KatyK

  Hello

  Yes, you can create a repair disk.
  a. Click Start.
  b. click on all programs.
  c. click on Maintenance.
  d. click on create a system repair disc.
  e. Insert a DVD into the drive, and then tap on create disc.

• iMac, 2012, 27″, will not start, not even in safe mode

  IMac my wife, 2012, 27″, El Capitan, will not start, not even in safe mode. The problem started during the installation of Mac Office 365 (2016), although the installation on my machine worked fine.

  The following two photos are sure Mac verbose mode. (Photos are from consecutive boots, that the camera did not focus, but the behavior of the Mac is constant in boots attempts.)

  http://www.jdawiseman.com/2016/20160218_230538_mac_wont_boot.jpg

  http://www.jdawiseman.com/2016/20160218_230059_mac_wont_boot.jpg

  Disc utilities reported an error. Although fsck - fy is not.

  Please, kind of people from the communities of Apple support, what should I try then?

  Thank you.

  Have you tried to boot into recovery mode. Combinations of keys start for Mac - Apple Support

  Select disk utility, then check the disc. Resolve startup issues and perform maintenance on disk with disk utility and fsck - Apple Support

  How much free disk space hard do you?

  What is the error Disk Utility has.

  Kim

• Windows Vista does not start, not even in safe mode

  I have a HP desktop computer comes with Windows Vista installed on it.  I have no recovery discs, I have a hard disk recovery partition.  I can't start in safe mode.  I ran startup repair, tried restore points and even tried a complete pc restore, nothing works.  I am still unable to start Windows, even in safe mode.  Here are my coordinates of startup repair problem.  Can you please point me in the right direction?

  Problem event name: Startup Repair V1

  Signature of the problem 01: Auto failover

  Signature of the problem 02: 6.0.6000.16386.6.0.6000.16386

  03:6 problem signature

  Signature of the 04:655370 problem

  Signature of the problem 05: installation failed

  Signature of the 06 problem: no boot failure

  Signature of the problem 07:0

  Signature of the 08:0 problem

  Signature of the 09 problem: unknown

  Signature of the 10:1168 problem

  OS version: 6.0.600.2.0.0.256.1

  Locale ID: 1033

  Thank you!

  Traci

  If the HP recovery process does not work, it seems to be a hardware problem.

  And now that you mention have a blue screen.

  If it was a software problem, the process of HP recovery to reinstall the operating system should fix (take it back in new condition).

  And this new condition would exclude any incorrect hardware drivers may have installed the original problem.

  Have you tried HP support?

  http://WWW8.HP.com/us/en/contact-HP/contact.html

  Or assistance HP Forums:

  http://h30434.www3.HP.com/

  See you soon.

  Edit:

  HP recovery process, you get the possibility of a destructive or non-destructive restore. If you use non-destructive recovery option, often have the same problems continue.

  The problem continues when you use destructive recovery too.

• Can not open in safe mode / clear the cache because firefox is frozen

  I tried to load a page which seems to have had a built-in buggy video ad, and now Firefox is stuck. It stops responding, but when I force quit and reopen it, it opens the offending page, still too and it freezes again. I tried to restart my computer and reinstall Firefox and the problem continues to be. I can't follow the advice I've seen here on open mode without failure or clear my cache, because Firefox crashes before I can do it. I there a way to make these Firefox outdoors? I use Mac OS X 10.6.8 if that matters.

  Thank you!

  Hello

  Try Firefox Safe mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that temporarily disables hardware acceleration, restores some settings and disables add-ons (extensions and themes).

  If Firefox is open, you can restart Firefox Safe mode in the Help menu:

  • Click the menu button

    

    click Help

    

    then select restart with disabled modules.

  If Firefox does not work, you can start Firefox in Mode safe as follows:

  • On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac: Hold the option key during the startup of Firefox.
  • On Linux: Exit Firefox, go to your Terminal and run firefox-safe-mode
    (you may need to specify the installation path of Firefox for example/usr/lib/firefox)

  When the Firefox Safe Mode window appears, select "start mode safe."

  

  If the problem is not present in Firefox Safe Mode, your problem is probably caused by an extension, theme or hardware acceleration. Please follow the steps described in the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. This might help others with the same problem.

• I uninstalled and reinstalled and Firefox for windows 7 does not open. There is no error message - it just does not, even in safe mode. What should I do?

  My computer is set to the automatic update in Windows 7 Home Premium and Microsoft Office Professional Plus 2010. I am also running Norton 360. There was a major update for the office on 10-12-14, which seems to be at the start of my problems. This month, whenever my updates caused a restart, Mozilla has failed to open. I uninstalled and reinstalled several times, and it lasted only a day or two before it crashes again. This last time it is still not open. All instructions to solve problems appear to be based on the idea that the program is open and just questions. I can't even open it in Mode without failure.

  I tried to reinstall, and it says it will launch automatically when the installation is complete, but it does not work. As Norton scan every download before it works, I am not sure if this is the problem since I never get the window that indicates the setup step by step for Firefox.

  What should I do?

  Some Firefox problems can be solved by performing a clean reinstall. This means that you remove Firefox program files, and then reinstall Firefox. A clean reinstall is not the same as a regular resettlement performed using built-in installer. Please follow these steps:

  Note: You can print these steps or consult them in another browser.

  1. Download the latest version of Firefox from mozilla.org office (or choose the download for your operating system and language on this page) and save the file to install it on your computer.
  2. Once the download is complete, close all Firefox Windows (or open the Firefox menu

     

     Click the close button

     

     ).

  3. Remove the Firefox installation folder, which is located in one of these locations, by default:
     • Windows:
       • C:\Program Files\Mozilla Firefox
       • C:\Program Files (x 86) \Mozilla Firefox
  4. Now, go ahead and reinstall Firefox:
     1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
     2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

  More information on the resettlement of Firefox can be found here.

  WARNING: Do not use an uninstaller to third parties as part of this process. This could permanently delete your Firefox profile data, including but not limited to, extensions, cache, cookies, bookmarks, personal settings and passwords saved. They can be retrieved easily unless they have been backed up on an external device! See back up and restore the information contained in the profiles of Firefox.

  Please report to say if this helped you!

  Thank you.

• I have win XP SP3, I ran a virus scan and I still can't open anything in the title of the standard account now the admin account does not work no more not even in safe mode what can I do?

  How can I fix the operating system of the issue I'm having with my computer I did a virus scan and now I can't even do anything under the admin account I could do before the scan I can't even do anything in safe mode the standard user account was seen maleware pop ups before I did the scan the admin account had no problem before the scan is carried out I used Mcafee and it did not work it seems to have done worse and windows defender was no use which can make?

  Hello

  • You receive an error message?
  • What exactly are you not able to access?
  "Your question contains all the required information necessary for us to help you. Please re - write your question, this time to ensure that you have included all the information required and we will try to help. »
  Refer to this link for more information on: How to ask a question
   
  In the meantime, you can try a full system scan just to be sure.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

• The system restore. I can't even to safe mode or a command prompt.

  How should I do system restore when I can't even at a command prompt or safe mode.  I tried to open using two techniques, but the computer crashes as drivers are loaded.  all this happened after I had an automatic download of the latest updates of microsoft xp.

  The good news is that you have an installation CD of Windows XP (from what you describe). The method described here should work for you:

  http://support.Microsoft.com/kb/307545

  Type carefully!

• My PC does not load, I need to do a factory reset, but I can not even enter the Mode without fail because of BOOTMGR is missing. Windows 7

  I'm at the stage where I should be able to load Windows. I don't care if I lose all my files etc.

  I hope someone can get to safe mode or some kind of reset where I can start everything again.

  I use windows 7

  Procedure A:

  Turn on PC

  Wait,

  Motherboard ASUS screen, (ignored)

  Black screen with message: BOOTMGR is missing.   Press Ctrl + Alt + Delete to restart.

  Steps in scenario b:
  Turn on PC,

  There is a screen of ASUS motherboard for less than one second,

  I can press F8 or del to enter this menu.

  That shows a menu, please select boot device:

  -SATA: ST30...

  -SATA: ST31...

  -Access configuration

  Choose any SATA translates BOOTMGR is missing.

  Enter the configuration doesn't have a lot of options and I can't access safe mode.

  So I'm all out of options.

  I want to do a factory reset or similar.  Please help ASAP

  There's probably a way to initialize the factory restore, but it varies depending on the brand.  Let us know the brand of your computer and that we are able to help you.

  On a computer Dell, for example, by pressing F11 at startup Initializes the factory restore.

• I can not using F8 safe mode, so I can not get access to my admin account and therefore cannot uninstall my program

  original title: administrator, f8 safe mode access

  My computer problem begins with not being about to uninstall a program. I need administrator permissions. I am the administrator with a password. I'm not invited to give a. Nothng happens when I press a button with a shield on it. I received another message that tells me "unable to open the access control editor: the system cannot find the specified file. I found the instructions online to restart the computer (by pressing the F8 key) in safe mode. Once in safe mode I can essentially take possession of the C drive and reset admin ACCT. in SUMMARY, I can't have with using F8 safe mode (I tried once bagillion) so I can not get access to my admin account and therefore cannot uninstall my program. Can anyone help?

  I don't know anything about "reset admin account" but here are two things that may help the case to start in safe mode.  First, enter the mode safe mode with f8 key is a matter of time.  On my computer (Dell) during the boot process, I'm going to get a screen send me options of start of f2 and f12, which is to enter the BIOS.  I can start hitting key f8 then but you will in safe mode unless I'm hit immediately after that the screen with f2 & f12 choices goes.  I just hit several times for a few moments at this time.

  If this does not work for you, here's another possibility: http://www.howtogeek.com/howto/windows-vista/force-windows-to-boot-into-safe-mode-without-using-the-f8-key/

• Firefox interface late bad (between tabs, menus from opening), even in safe mode.

  Switching between the tabs, playing GIFs, play YouTube videos, type some text, and open the menu of Firefox are sometimes lag.

  For example, sometimes when I click on a tab to view it, there will be a delay of one second before its content is displayed.

  I tried Google Chrome and it doesn't have this lag. My computer is powerful enough.

  I've tried safe mode, but the problem was present there, too.

  I tried to empty the cache, but not luck.

  I don't know what else to say, so if you want more information, please just ask! Thank you.

  I tried this and disable the Manager of Session add-on and Firefox seems to be back to his usual quick self.

• After installing Win7 x 32 SP1, I can't launch Firefox. Not even in safe mode. I uninstalled Firefox and re-installed the program. Does not start.

  After you have installed SP1 Firefox stop working and Internet Explorer stop working. I can only use Chrome as browser at the moment.

  See:

  • http://KB.mozillazine.org/Browser_will_not_start_up

  One possible cause is security software (firewall, antivirus) that prevents or limits Firefox or plugin-container process without informing you, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox and the plugin-container in the permissions list in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.org/KB/server+not+found
  • https://support.Mozilla.org/KB/firewalls

  Do a check with some malware malware, analysis of programs on the Windows computer.
  
  You need to scan with all programs, because each program detects a different malicious program.
  
  Make sure that you update each program to get the latest version of their databases before scanning.

  • http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
  • http://www.superantispyware.com/ - SuperAntispyware
  • http://www.microsoft.com/security/scanner/en-us/default.aspx - scan Microsoft Security
  • http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
  • http://www.safer-networking.org/en/index.html - Spybot Search & Destroy

  Alternatively, you can write a check for an infection rootkit TDSSKiller.

  • http://support.Kaspersky.com/viruses/solutions?QID=208280684

  See also:

  • "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

• No signal when start and can't get into safe mode.

  So, I have an E machine with microsoft xp on it. And last night I lost the signal of the monitor. But I just restarted it and she came back. But he started for about every five minutes after re boot. I put it in save mode, and he continued to do so. And then when I started again, there was a "serious error of microsoft" and I sent the error to microsoft, as well as something active desktop. Showing all the reasons of what can happen. My computer is really slow so I decided to just drive with flash reprogramming CD, I put in and restart it and I don't get any signal constantly even now when I reboot... Please help, thanks.

  Hi andreasburlet,

  ·         You see a message on the screen?

  ·         Have you checked for fine connections?

  ·         Do you want to say that you tried to reinstall Windows XP?

  Method 1: Ensure that all connections on the monitor are tight.

  Method 2: Connect and disconnect a RGB cable can help them as well and that could ensure a good signal. Look at the end of the cable to see if you have all the appropriate pins.

  Method 3: You can also try with another monitor, if possible. It could also be your video card. See if it is connected. If you are not comfortable doing so, communicate with a known person.