Firefox does not fill the screen

Similar Questions

• Games running in lower resolution on the desktop resolution does not fill the screen

  I have a laptop HP ENVY 17 TS with NVIDIA GT 740 M and Intel 4600HD graphics drivers and running Windows 7. Whenever I want to change the resolution in games at a lower resolution on the desktop resolution, the game shrinks to its view, leaving the couple of inches black bars on the edges. For example, if my the desktop resolution is 1920 x 1080 and I want to start a game in 1600 x 900, the game does not fill the screen, instead, it leaves an amount of empty space on the edges of the screen.
  
  In order to solve this problem, I tried the following steps:
  
  I first tried to locate the view tab in the NVIDIA Control Panel in order to define the scale/stretch in "Full screen", but my version of NVIDIA CP isn't the view tab (my NVIDIA drivers are the latest version).
  
  Then I discovered that I should do this in the Intel HD Graphics Control Panel. My Intel HD Graphics CP has an option named "Calibration" under display > display settings and it doesn't show the option to retain display scaling that is checked by default and does not change. Also, after searching the Internet I saw that some people suggested entering the 'advanced settings' and try to make changes. When I try to enter advanced settings, under view, it says 'this screen does not support advanced settings'.
  
  After trying without success, I tried the update driver Intel via their website, hoping that it can fix the problem. I ran the small Intel application on their Web site that identifies my chipset and offers me the latest driver for this chipset. Web site told me that the driver is installed on my computer is 10.18.10.3304, and there is an update for what is 15.33.18.64.3496 (or 10.18.10.3496). So I downloaded the file, but when I tried to run, it gave me this error message: "the drivre being installed is not validated for this computer. You can get the correct driver from the manufacturer of the computer. Setup will now exit. "that makes no sense.
  
  After trying the above steps, I'm not able to solve the problem, and I need help from someone who really knows how to solve this problem.
  
  Thank you.

  Solution (I hope)

  1. choose the properties of the graphic (logo Intel) option when you right click on the desktop

  2. go in view

  3. go through the resolutions on the 'Resolution' and change to this resolution (do not click Apply)

  4. for everyone to go to 'Scaling' at the bottom of the screen and change it to scale full screen (do not click Apply)

  5. Repeat until you get back to the higher resolution (that won't let you change the scale).

  6. quickly choose a few resolutions from the drop-down menu to make sure that they have changed their scale.

  I had a problem with some resoultions changing the way they were, but which should solve most of the problems.

• DVD burned in first pro cc does not fill the screen. Desire a 4:3 aspect ratio

  I use first pro cc. I burned a dvd several times, trying different presets. Every time the dvd never fills the screen. It does not lool like box (16 x 9) letters. There is space around the photo / video. Need quick assistance, project is already late. Thanks in advance.

  Theo Smith

  Have you used one of the mpeg-2 DVD presets?

  Which one?

  MPE or Premiere Pro?

  Please show a screenshot of your output settings.

• Program BACK in Guest XP on Windows 7 does not fill the screen

  Hello world

  I have a quite unique due to many circumstances situation and several months of research to get to a decent workaround.

  I have a tool written in Basic for MS-DOS. I need to use this tool and the interface with the files created in Windows 7. VMWare Player with no very good support for sharing files between DOS with Windows 7 clients, I have opted for a guest of Windows XP on my computer Windows 7 host and who go through the program. In this way, I can share files between XP and 7 and run the program correctly in the XP VM. Note that this program doesn't work at all on Windows 7 due to some problems graphics driver, hence the need for such a solution.

  When I run the XP VM, it is able to match the resolution as expected. However, when I open the program BACK, he is not full screen as it does on a native XP machine or even a VM XP in VMWare Fusion on a Mac. Is there a way to force it to fill the screen? The graphics full screen are vital for visibility - I can barely see anything on the screen of dinky little 640 x 480 without blowing up to its maximum potential.

  I tried several other options, including a Windows VM (I'm under Windows 7 Enterprise) and DOSBOX. Windows VM has the same problem resolution in addition to requiring the integration of features enabled to share files and requiring the same integration disabled features in order to run the program and the DOSBOX not full screen but the performance is much too slow to be practical (it is similar to take 2 minutes to scroll through a web page that is several pages a notch long) even at maximum settings.

  Please no suggestions ' do you have the printer "-I am part of a team of average size on how it works and it's pretty much the last roadblock after several months of work. We probably tried everything which is immediately obvious, including the recompilation of the source code for the program BACK (that we had to do anyway to remove a lock imposed by a society that no longer exists).

  The closest that I have is to reduce the resolution of the host Windows 7 in 800 x 600, which makes the VM a bit larger but still not quite full screen. I try to activate the VGA 640 x 480 mode, I guess? Even in this case, however, the need for constantly changing screen resolutions makes this solution less than ideal.

  Thank you for all the suggestions/help.

  Do I understand correctly:

  -It is an application with a fixed resolution of 640 x 480 fullscreen

  -You want that he developed the scale to fit to your screen

  As far as I KNOW, VMware Player is not just what to do.

  There is a tutorial in the section documents for a workaround (using the changer display to automatically change the resolution of the host).

• Why some pages on mobile phone does not fill the screen?

  I just created a desk and a telephone mobile version of a Web site for my wife - http://sandravollmer.com . The desktop version works fine except that sometimes, the home page is not rendered correctly (and look great) even if the other pages that are well appear.

  My main problem is with the mobile phone version which has two pages that do not display when you go home. You can double-click and they will fill the screen but otherwise they fill about half to two-thirds of the screen. These pages are pages of opportunity and the video evidence.

  I am not entirely new to Muse that I created my site with it after it first came out, but I'm no Designer Web site in no way am baffled by this question. I tried to change several things on the relevant pages and even on the master page, but nothing seems to work.

  A cure or your suggestions will be GREATLY appreciated!

  David Vollmer

  I'll answer my own question because after doing a "select all", I discovered that there is something on each of the pages that I didn't and forced as a result page is smaller. After removing the offending element on each page, everything seems normal and large.

• Firefox loads, icon on the bar of tasks but when you click the slide of graphics off to the right, but does not fill the screen & when you right-click again, falls back into the icon

  Firefox, Thunderbird and Quicken were active when I loadad & ran a slot machine game. When I left the game & click on icon to return to Firefox full screen, I could see the flash of the image to the right of my screen and disappear. When I clicked on the icon in the taskbar, the reverse happened - the image flashed from the right down to the icon. When I hover the mouse over the icon, the open screens appear with the red X to close, but the same thing happens when I click on this box. Two other programs that have been opened, while the game was active work correctly, only Firefox has been affected. I can't open the program to access one of the menu items that I can't get the image of the screen on the monitor. I did uninstall and reinstall a freshly downloaded copy, I had to use IE, as I am now) but with the same results when I run. I did chose to save my settings, so if something has changed here so maybe that's the problem.

  Hello

  Try Firefox Safe mode to see if the problem goes away. Safe mode is a troubleshooting mode, which disables most of the modules.

  (If you use it, switch to the default theme).

  • You can open Firefox 4.0 + in Safe Mode holding the key SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • Or open the Help menu and click on the restart with the disabled... modules menu item while Firefox is running.

  Once you get the pop-up, simply select "" boot mode safe. "

  If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. To do this, please follow article Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems .

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. It might help others who have the same problem.

  Thank you.

• Whenever I try to maximize a window, it does not fill the screen

  I'm running a new Dell laptop on Windows 7 and whenever I try to maximize a window (a web browser, for a folder of files, etc.), display is not going to the top of the screen and there is a 'gap' where I can see my desktop.  Changing the resolution did not help, nor has using the extension/retraction button in the upper right of the browser. Any idea on how I can do this deficiency disappear and displays her fill the entire screen?

  Hello

  I suggest you perform a clean boot and check if that helps, by following the link:

  How to troubleshoot a problem by performing a Clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Refer to, step 7 'reset the computer to start as usual', after the clean boot is performed.

  I hope this helps.

• Window does not fill the screen of the computer

  I have a black margin of 1 inch on each side of the window on my laptop.  How can I get the entire screen to be filled?  I don't know how I messed up this - but I don't know that there is this operator error!

  the cursor won't go the black margn. Thblack margins are around the entire screen with a box in the middle with the window. Help please!

  Next time please start your own thread. This began in July 2009. That is 1 year and 3 months.

  Try this:

  1. set the resolution of the screen
  Right-click on a free space of your desktop computer > click Customize > click on display settings > use the slider to change the resolution > click OK when finished.

  Resolution based on the screen size

  Monitor 15 inch	1024 × 768
  17 to 19 inch monitor	1280 × 1024
  monitor 20 inch and liked	1600 × 1200

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Google does not fill the screen

  Hi just received a pavilion amd a8 with radeon graphics card

  the screen on google don't go full screen, even if it is checked on the radeon interface guide

  the internet screens are articulated with the white blank areas of 1.5 inch on each side

  How can be done to adapt to the screen

  also, some of the subway tiles are very dark and jerky when they open

  is this related?

  Thank you

  Hi sorry
  Thanks for the reply
  I have a hp pavillion 500 242 ea Office
  A8 5500 AMD
  With Radeon r5 235 + 7560 hd graphics card
  The monitor is a dell e173fp. Dated flat screen it worked perfectly with my old xp system.

  Hope that helps it means nothing to me

  Some of the subway tiles also do not work properly, very dark and a little nervous

  Thanks nigel

• Windows 8 screen does not fill the screen of my laptop, how to correct?

  Just installed windows 8 on my laptop, but it is less broad than the laptop screen (there are black stripes down each side approximately 1 "wide).

  Tried to set the resolution, but it will not let me, how do I fix this please?

  Welcome,

  step 1: download your graphic driver.
  This link might help you:
  http://answers.Microsoft.com/en-us/Windows/Forum/hardware/display-driver-issues-in-Windows-8-consumer/93866a8c-4ef6-4ae5-BD46-58d3e3def5e9
  http://Windows.Microsoft.com/en-pH/Windows/hardware-drivers-help#hardware-drivers-help=Windows-7
  Then, you can change your resolution in the Screen Resolution settings window, or click with the right button of your office.

  
  This site might help you

  http://Windows.Microsoft.com/en-in/Windows-8/get-best-display-monitor

  resolutions of laptop are usually:

  1400 × 1050

  1280 × 800

  1024 × 600 (unusable due to the conflict in the requirements)

• Video does not fill the screen

  My porca miseria! "Mi sento come to fossil su una isola deserta in mezzo all'oceano mentre sto lanciando una bottiglia con dentro UN bigliettino recante the written form: ' save! » ....!! Not so the inglese, e is c'avessi avuto modo, voglia e tempo per impararlo non avrei aspettato to reach a 49, perdipiu by return anni con una assistenza di first pro!  Therefore, optimizing che nobody leggera cio che mi sento di esternare "libera", sewn it senso di impotenza mio. He e questo problema. Sull'anteprima, L'immagine mi compare molto piccola, quasi UN francobollo. E' al 75%, risoluzione massima. Come negli altri progetti, nei quali invece e molto più great. The impostazioni con cui ho fatto riprese sono the stessa. COSA e successo? COSA's modificato?  Rinfrazio anticipatamente, qualora may qualcuno di trovasse, nell'oceano, a party of mie navigare slab...

  [title published by mod]

  

  

• Have 2 websites that does not fill the screen

  My site of newspapers and websites foodnetwork now find Miss and in the middle of the screen... very hard to see. All the others are so far OK.

  Check your zoom controls. Hold the (Mac = Options) key, press; + (more) to enlarge - (less) reduce restore 0 (zero)

• Image used as background is larger than the screen resolution but does not fill the screen

  My laptop resolution is 1600 x 900, the image I want to put it under wall-paper is easily bigger than what is 1775 x 1235.   I understood the bars on each side, if the image was smaller than the resolution of my screen but the image is much larger.   Why then should I always get these black bars?

  Click with the right button on the desktop background and select Customize,

  Click the downstairs desktop background link on the left

  Use fill or adapt.

  

• When I open explore the shape does not fill the screen. I have to click the button of "maximum".

  At the same time, stretching the form to fit the window would result in the form still open in full screen.  That no longer works.  Is there a way to make forms of full screen automatically whenever they are open?

  HP Pavilion e9150t Vista 64-bit

  Hello

  I don't know what shape are you talk, but for Windows Explorer, you can use the expand in the upper right. To remember the next time when you use Explorer again.

  Kind regards

• BUG: Tablet Mode does not fill the screen

  Hi all

  See this file:

  Dropbox - MicrositeRedesign05.muse.zip

  You will see that I have nothing to off on the side that would cause this behavior I learned other threads.

  Here is the live site:

  Home

  Not sure what's the bug, but I really need to know what it could be. This information is copied/pasted my version of office.

  Thank you!!!

  Dave

  See http://prntscr.com/4wpigl .

  Liberty Mutual Insurance logo at the bottom is placed much too right.

  See you soon,.

  Vikas