Firefox does not start after the computer restarts

Similar Questions

• Firefox does not start after the places.sqlite opening in Notepad

  Firefox does not load again. I tried to create a large folder of bookmarks, but I wanted them to hide so I tried to be clever and create a copy of my current places.sqlite who had no bookmarks added and moved elsewhere, then I added bookmarks and once that replace the current places.sqlite then I created a copy of this and put it elsewhere for more security and then I replaced it with the first places.sqlite I had copied. I had to go through that much trouble because for reasons, I was unable to delete the bookmarks by right-clicking and selecting delete. I had already tried to open places.sqlite in Notepad and since then is when it started to happen. I tried to reset the file extension type, or rather detached, but I can't figure out how. I also tried to remove completely any Mozilla partner, restarted my computer and then reinstall Mozilla, but it didn't work and I prefer not to try again or uninstall it because my computer has a very difficult time even boot Windows 10. He likes to get on the desktop and then never hang while I have to restart the computer continuously until it works.

  Can someone tell me what to do or where it is that I was wrong?

  Do a clean reinstall and delete the program folder before Firefox to (re) install a new copy of the current version of Firefox.

  • Download the installer of Firefox and save the file to the desktop
    https://www.Mozilla.org/en-us/Firefox/all/

  If possible to uninstall your current version of Firefox to clean the Windows registry and settings in the security software.

  • Do NOT remove the "personal data" when you uninstall your current version of Firefox, because this will remove all profile folders and you lose personal data such as bookmarks and passwords including data profiles created by other versions of Firefox.

  Delete the program folder Firefox before installing newly downloaded copy of the Firefox installer.

  • (32-bit Windows) "C:\Program Files\Mozilla Firefox\"
  • (Windows 64 bit) "C:\Program Files (x 86) \Mozilla.
  • It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.
  • http://KB.mozillazine.org/Uninstalling_Firefox

  Your bookmarks and other personal data are stored in the Firefox profile folder and will not be affected by a uninstall and (re) install, but do NOT delete personal data when you uninstall Firefox which removes all Firefox profile folders and you lose your data.

  If you keep the problems, and then create a new profile.

  • http://KB.mozillazine.org/Profile_folder_-_Firefox
  • http://KB.mozillazine.org/Profile_backup
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

• Firefox does not start after the 3.0.1 update

  I have Firefox 3.0.1. I would like to upgrade to 3.6, but if I try to upgrade to any version, I can't open Firefox. It is not like the other problems "Does not", because in the Task Manager, firefox.exe appears, then disappears instantly. I tried in Safe Mode, do a clean install of uninstall Firefox and my profile, cleaning the registry, then using CCleaner, then try reinstalling but the problem persists. Sometimes firefox.exe is not even appear in the Task Manager. I can also use any version of IE (even if I wanted to), Safari or Chrome. They have all the same results. I suspect that this isn't a problem with Firefox, but with my computer, but I don't what is wrong. Can someone help me?

  This has happened

  Each time Firefox opened

  == I upgraded from 3.0.1

  Thanks for your tip on the killer of program. There was a program on my computer called Naomi Filter. I didn't know what it was until I saw this and he looked up. It turned out to be an internet filter which automatically closes the browser. I don't know why 3.0.1 works, but I deleted it and Firefox and Chrome work perfectly now. Thank you!

• Firefox does not start after the upgrade: error code 2324

  I updated Firefox on my desktop running Windows 7 Enterprise (64-bit). Installer stub downloads and works through the installation, but does not automatically start Firefox. If I click on the link in the task bar, nothing happens. Same thing with that pinned to the start menu. If I go to the Mozilla folder and load Firefox from there, I get a message saying "Setup has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2324. »

  Hello

  Some Firefox problems can be solved by performing a clean reinstall. This means that you remove Firefox program files, and then reinstall Firefox. Please follow these steps:

  Note: You can print these steps or consult them in another browser.

  1. Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
  2. Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
  3. Remove the Firefox installation folder, which is located in one of these locations, by default:
     • Windows:
       • C:\Program Files\Mozilla Firefox
       • C:\Program Files (x 86) \Mozilla Firefox
     • Mac: Delete Firefox in the Applications folder.
     • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
  4. Now, go ahead and reinstall Firefox:
     1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
     2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

  More information on the resettlement of Firefox can be found here.

  WARNING: Uninstaller or the use of Firefox and not run a third remover as part of this process, because who could permanently delete your Firefox data, including but not limited to, extensions, cache, cookies, bookmarks, personal settings and passwords saved. These can be recovered, unless they have been backed up on an external device!

  Please report back to see if this helped you!

  Thank you.

• Satellite P300 - Value Added package does not work after the computer restarts

  Hello

  I have a Toshiba Satellite P300 PSPCCA Windows vista ultimate x 64. I can't do my work button soft touch. I downloaded latetest VAT package and installed. After installation it asks to restart but I restart my laptop and I make just restart Flash Card and my button works all good touch app that is silent, Media Player, etc., but once I restart my laptop it stops working.

  I tried the uninstaller and reinstalling but no luck. I read in the forum toshiba on running CCleaner and do a fresh install but still have the same problem.

  Does anyone of you knows how to solve this problem.

  BTW, I got the software AVG internet security on my system, but have added folder toshiba for exclude of realtime scanning just in case if its causing problems but not luck. I searched qurantine folder and its nothing in there.

  Please help me get my work button soft touch.

  Thank you.
  Kind regards
  Jay

  Post edited by: Jay Padia

  Hello Jay

  I agree with Akuma. All you can do is remove VAP preinstalled system and reinstall the latest version. Why you didn t follow the instructions to restart the computer after the installation of VAP?

  I installed VAP several times on my Satellite P200 and Satellite A300 without any problem, but after installing the latest version, I rebooted phone immediately. The procedure of the facilities has been completed and necessary processes started in the background. I guess that's the problem on your Satellite P300.

  If nothing is done the last step is to install the OS by using the DVD facilities. After doing this you will own preinstalled OS and everything works well again.

• Firefox does not start after the installation of the XP patch on the day the day

  One night XP installed a patch and restarted my PC. This morning, I can't Friefox to start. I tried the xpicleanup.dat file by following the instructions here (search hidden etc folders), but search ends without locating the file. Does anyone know where Firefox parks this file normally? If this isn't the case, I don't know what to do next?

  • Start Firefox in Mode safe holding the SHIFT key while starting Firefox
  • As alternative method, select "Start-> run" and type one of the following values in the box run Windows:
    • Firefox-safe-mode
    • "C:\Program Files\Mozilla Firefox\firefox.exe"-safe-mode

  -> Safe mode of Firefox window will appear-> don't SELECT ANY OPTIONS, just click continue in Safe Mode

  -> Themes and extensions troubleshooting

  • https://support.Mozilla.com/en-us/KB/troubleshooting%20extensions%20and%20themes

  Check and tell if its working.

• Suddenly wifi does not work after the computer restarts

  After that I restarted my netbook, it is no longer connect to any wifi public my ipod has no problem. It seems that I can connect to the router but no internet and no ip address. When I connect woman manully, it acquires the router's ip address. I can't even restore the system. When I tried to open IE, my alerts firewall running TCP/IP. Please help me.

  Hi yuanlinsh,

  · What is the number and the model of the computer?

  · What is the service pack installed?

  Follow the methods below:

  Method 1:

  Disable security software and firewall temporarily on the computer and then try to connect to the internet.

   

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2:

  Follow the steps from the link below: Troubleshooting network connection problems:http://www.microsoft.com/windowsxp/using/networking/maintain/troubleshoot.mspx

  Method 3:

  Also, try to reset the TCP/IP Protocol and check the results: how to reset the Protocol (TCP/IP) Internet:http://support.microsoft.com/kb/299357

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Firefox does not start after the update?

  Apparently my system crashed during a win7 64 update from one day to the next. I have restored a previous value of the restoration and was able to get windows back and will again. Then, when I clicked on my shortcut of firefox to open the browser and restore my previous session, he said that the browser has been updated and that he would begin shortly. He never did. A few minutes later, when I tried to click on the usual shortcut I now get the message "the"firefox.exe"item that this shortcut refers has been changed or deleted...". »

  How can I do to fix this without losing my history, bookmarks and the ability to restore my last session? I had many open tabs that are important and I would like to come back to this session so I can their favorite.

  Using the system restore can cause your installation of Firefox get corrupted because only the whitelist files are restored, so always be careful with the system restore function.

  • You may lose data in the profile Firefox as to .ini (sessionstore.js) and .js files folder
  • http://KB.mozillazine.org/Profile_folder_-_Firefox

  You can reinstall Firefox.

  • Download the full Firefox installation program and save the file to the desktop
    https://www.Mozilla.org/en-us/Firefox/all/
  • Remove the Firefox program folder to do a clean reinstall
  • Start the installation by double-clicking on the desktop icon
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

• computer does not start after the Windows XP logo window

  Windows xp home edition
  service pack 2
  Dell inspiron 1501

  1. computer does not start after the Windows XP logo window
  2 works well in safe mode, even connect to the external monitor
  3. I reinstalled xp many times, problem stil exist.

  All the answers?

  Hi dhanushm,

  1. What happens after the Windows logo screen?
  2. You receive an error message?
  3. You have security software installed on the computer?
  4. Have you performed an installation clean Windows XP and even after that this problem exists?

  Method 1

  As the computer starts up fine in safe mode there is a possibility that some third-party programs installed on the computer is the origin of the problem.

  I suggest that you configure the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. Click Start , and then click run.
  2. Type msconfig , and then click OK.
     The System Configuration utility dialog box appears.
  3. Click the general tab, click Normal Startup - load all device drivers and services , and then click OK.
  4. When you are prompted, click restart to restart the computer.

  Method 2

  If fails it above step can refer to the article below and try the steps mentioned, check if it helps.

  After the Windows Logo appears or after you log in to Windows, a Windows XP computer cannot display the wallpaper, a black screen or a blue screen

  http://support.Microsoft.com/kb/318027

• Computer does not start after the screen of the bios, Compaq Presario SR1023WM

  Ok. Trying to fix a friend's computer and seem to have met a strange barrier.

  Problem: The computer does not start after the bios screen.

  Details: When you turn on the computer, the compaq logo with intel inside is and has the < F1 Setup > and < F10 System Recovery > options listed as well.  And that's it as far as the computer becomes.  After that the computer just locked up, no work of buttons on the keyboard lights keyboard ect ect.  I tried the puree on the F1 key, as soon as I turn on the computer and I can handle so he can say * entering setup * but it freezes again after this point.  I already tried to eliminate the possible sources of the problem, removed all expansion cards, HDD and Dvd Rom module only disconnected, only memory (256 MB ddr 2700), power, vga and keyboard connected.  Ive also used the jumper on the motherboard to clear the cmos, hoping that would solve the problem without success.  I tried using a different memory stick and different memory as well...  Tried to use both a ps2 and a usb keyboard... Ive even tried pulling the rider for the protection of the bios password (even if she did not have a password on it, just try everything I can think of).

  The installed bios version is 3.1, and that's all that I know on the computer at this point, except that the website tells me to him.

  http://h10025.www1.HP.com/ewfrf/wc/product?product=411354 & LC = on & CC = US & DLC = in & Submit.y = 5 & Submit.x = 3 & lang = to & CC = US <-link to the Web page for the model #.

  I'm basically at a loss on this one, so if someone feels scroll line-by-line of their brains on this one, I'd be very happy.

  I have a pretty strong understanding of computer repair, so feel free to give me something to try.

  If you need more information out of me, let me know as well.

  Try to clear the CMOS again but this time remove CMOS battery and hold the power button on a few seconds. Replace the battery, then try to start back to the top.

  At the back of the pc is the condition of the PSU led green or flashing?

• Z600: computer does not start after the installation of the 5 TB SATA drive

  My z600 refurbished does not start after the installation of a SATA of Toshiba 5 to disk.  After removing the drive, the computer starts.  I have my computer too old to handle a 5 TB drive, I something wrong or is the DOA drive?

  Thanks for the info.  I added the GPT to my search and discovered what had to be done in disk management.  Here is a page with step by step instructions and photos.  http://www.howtogeek.com/193669/whats-the-difference-between-GPT-and-MBR-when-partitioning-a-drive/

• computer does not start after the installation of vista updates.

  computer does not start after the installation of vista updates. Startup Repair is also not working. event name: Startup Repair v2, prob GIS. 1: automatic failover, prob GIS 2: 6.0.6000.16386.6.0.6001.1800, prob 3:6, prob prob 5 and 6 GIS GIS sig, 4:720907: corrupt file, prob GIS 7: 3221226021, 8:3, prob GIS GIS prob 9: repair wrp, prob GIS 10; 2, 0 s version: 6.0.6000.2.0.0.256.1. In addition, none of these advanced recovery options seem to work.

  Hello

  Try the steps suggested by David Y post dated November 2, 2010 in the link given below and check if that helps.

  http://social.answers.Microsoft.com/forums/en-us/w7repair/thread/a6071159-db22-4076-b5d8-31f446dbdf32

  Hope that information was useful

• XP does not start after the installation of avira. Blue screen: STOP: 0 x 00000024 (0 x 00190203, 0 x 87174270, 0xc0000102, 0x00000000)

  Original title: xp does not start after the installation of avira

  I have a HP Slimline s7410
  XP Home Edition SP3
  I had Norton free with Comcast, but since I have no more Comcast became Norton expired. So I uninstalled Norton and installed the free version of Avira, he scanned the computer and it was clean. I went to reboot and now it does not start.
  I have a cd/dvd drive of work.
  I don't have an XP bootable installation CD

  My system worked well until: I installed the free version of Avira

  Whenever I select one on the XP advanced options options menu start, it goes into a boot loop.
  I turn off the auto reboot system failure although it seems only work once, as the next time he's trying to start up it goes into the boot loop.

  Here's what my BSOD looks like:

  Disable or uninstall any anti-virus, disk defragmentation or backup utilities. Check the configuration of your hard drive and check the updated drivers. Run CHKDSK /F to check for hard drive corruption, and then restart your computer.

  Technical information:
  STOP: 0 X 00000024 (0 X 00190203, 0 X 87174270, 0XC0000102, 0X00000000)

  Any help is greatly appreciated! :)

  My first suggestion is to do a system restore at this time point.

  second suggestion is to keep your external drive connected to the pc at all times.  only detach when necessary.   of course, it would be better to install a second hard drive in the computer instead.   in any case, keep your personal files out of the system disk is a wise thing to do.   You can also download and store files for free on the Microsoft Skydrive site.

  third suggestion is to keep your system set upward through executing a check disk and Defrag at least once a month.   Basically, you can open the Explorer and right-click on the drive letter.  then select Properties, and on the Tools tab, you will have the opportunity to run the disk check.  then reboot and do a Defrag.   where this disk check fails, then you will need to run it to the drive via a bootable cd prompt.

  Interestingly, I don't know if the bootable cd that you made you allows to run the disk check.

  so my suggestion is to do a series of tests using your cd bootable your computer works.  see if you can actually run a chkdsk/r at the moment with them.    If Yes, then if your constant worries are having bad sectors on the hard disk, chkdsk/r will identify and mark so windows will jump on them.    in any case, see if your boot at the moment media can run a check disk at all, and let me know.

  fifth proposal is to install "microsoft security essentials" like your anti virus program.  even if you have run ubantu, it is not likely to have been an infected copy.   anti - are most critical virus for windows and not not so much for ubantu or linux is because windows is a system of world class operations.    the people who make the virus deliberately their engineer for the windows operating system.   If, however, ubantu and linux have been just as popular as Windows, virus engineers would make infections for the o.s. too.     Although they no doubt, attacks are more frequent for the windows os.

• Firefox does not open after the update. Cannot open the profile technical, even when you use the directory in cmd line path

  I'm using Firefox on a Windows 7 computer. Firefox does not open after the last update. I read the help articles and it seems that I need to create a new profile because my settings were probably corrupted. I'm unable to open the profile technical, even when you use the directory in cmd line path. I tried the following commands in the command line:

  Firefox Pei
  "C:\Program Files (x 86) \Mozilla" PEI

  Nothing happens with every order.

  I am also running Norton Internet Security. I read a help of virtual navigation features Re article that can cause a problem. The article says to check the setting of virtualization in the internet security software and to clear the virtual cache. I went through all the menus of settings in Norton Internet Security version 21.6.0.32 and I don't see anything that looked like in "virtualization" settings, so I guess that does not apply to me. "

  If you have any ideas, I had appreaciate that your expertise!

  Hello arcandl, at the launch of the firefox is not after you double-click the shortcut, it is sometimes also a sign of active malware on a system.
  you might want to try running a scan with some various other security like the free version of malwarebytes and adwcleaner tools that are specialized to remove the adware and browser hijackers.

  Fix Firefox problems caused by malicious software

• Two iMacs does not start after the 10.11.4 update.

  Two iMacs does not start after the 10.11.4 update.  Progress bar starts moving and then text appears on the black screen saying unexpected sigkill to launchd.  He then gets stuck in a loop trying to start.  Tried to reset the SMC and LANDAU.  Without success.  Started in recovery mode and ran disk utility.  Discs said OK.  Chose to reinstall OS X from the list of options in the recovery mode (assuming it would be 10.11.4).)  Installation is finished but still once does not start.  Reinstalled on 10.11.0 successfully from a USB key and downloaded the 10.11.4 combo updater.  Installation seems to work, but once again, the macs will not start.  Same 'unexpected launchd sigkill' error.  A mac is now back working properly with 10.11.3 the other will be shortly.  Is there a problem with the accession?  Our COMPUTER support use Munki to get updates from one day to the next.  Fortunately, we were able to stop it before the other 20 or if Mac had the same problem.

  More information: two bricks iMacs were late 2013 models.  A 21 "and a 27.  We have just updated a test iMac which was a late model 2012 using the 10.11.4 combo updater.