Firefox does not start after the upgrade: error code 2324

I updated Firefox on my desktop running Windows 7 Enterprise (64-bit). Installer stub downloads and works through the installation, but does not automatically start Firefox. If I click on the link in the task bar, nothing happens. Same thing with that pinned to the start menu. If I go to the Mozilla folder and load Firefox from there, I get a message saying "Setup has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2324. »

Advertisement

Hello

Some Firefox problems can be solved by performing a clean reinstall. This means that you remove Firefox program files, and then reinstall Firefox. Please follow these steps:

Note: You can print these steps or consult them in another browser.

  1. Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
  2. Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
  3. Remove the Firefox installation folder, which is located in one of these locations, by default:
    • Windows:

      • C:\Program Files\Mozilla Firefox
      • C:\Program Files (x 86) \Mozilla Firefox
    • Mac: Delete Firefox in the Applications folder.
    • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
  4. Now, go ahead and reinstall Firefox:
    1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
    2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

More information on the resettlement of Firefox can be found here.

WARNING: Uninstaller or the use of Firefox and not run a third remover as part of this process, because who could permanently delete your Firefox data, including but not limited to, extensions, cache, cookies, bookmarks, personal settings and passwords saved. These can be recovered, unless they have been backed up on an external device!

Please report back to see if this helped you!

Thank you.

Tags: Firefox

Similar Questions

  • Firefox will not start after the upgrade to 27. Seen an error message during the upgrade process.

    Firefox will not start after the upgrade to 27. Seen an error message during the upgrade process, but do not remember.
    Tried running firefox.exe Pei but error message:

    XML parsing error: the undefined entity
    Location: chrome://mozapps/content/profile/profileSelection.xul
    Line 18, column 1:
    "< dialog < =" "^ =" "p =" "> < / dialogue >

    Running on Windows XP SP3. No problem whatsoever before moving to 27. Sending of Chrome that I can't open Firefox at all.

    Thank you, jschaer2000. In the meantime, he works. How long, we'll see ;-)

  • Does not start after the upgrade to 1.5.

    Does not start after the upgrade to 1.5.  "EdgeAnimate.exe - not found entry Point? -Point procedure entry GetGestureInfo is not found in USER32.dll dynamic link library. »

    All ideas

    No problems in the past with edge since September 2012.

    =============

    Laptop HP Pavilion dv7-2185dx

    Dv7-2185dx product name

    #ABA product number NV023UA

    Microprocessor 2.00 Ghz Intel Centrino 2 Processor Intel Core 2 Quad Q9000 processor technology

    The microprocessor Cache L2 6 MB Cache memory

    6144 MB of memory

    Memory Max 8192MB

    Graphic ATI Mobility Radeon HD 4650 (M96)

    Video memory up to 2815 MB (1024 MB dedicated)

    500 GB (5400 RPM) hard drive

    Multimedia drive LightScribe SuperMulti 8 X DVD±R/RW with Support Double layer

    17.3 "diagonal HD + LED display high-definition HP BrightView Widescreen Display (1600 x 900)

    Fax/Modem high speed 56 k modem

    Network integrated 10/100/1000 Gigabit Ethernet LAN adapter

    Wireless Connectivity Intel WiFi Link 5100AGN

    The Altec Lansing SRS Premium Sound technology with subwoofer

    101 keyboard compatible with the keyboard keys full size numeric keypad with integrated

    Pointing device touch pad with On / Off button and dedicated vertical scroll up/down pad

    PC Card Slots 1 Slot ExpressCard/54 (also supports ExpressCard/34)

    External ports

    5-in-1 Integrated Digital Media Reader for cards Secure Digital, MultiMedia Card, Memory Stick, Memory Stick Pro, or xD Picture Card

    4 universal Serial Bus (USB) 2.0, 4th port shared with eSATA

    2 headphone

    1 microphone input

    HDMI

    1 VGA (15-pin)

    eSATA + USB 2.0

    1 RJ-11 (modem)

    1 RJ - 45 (LAN)

    expansion port for computer 1 cell 3

    1 IEEE 1394

    irewire (4 pin)

    1 consumer IR (remote receiver)

    Other devices HP Webcam with integrated digital microphone

    Dimensions 16.2 "(W) x 10.9" (D) x 1.37 "(min H) / 1.70" (maximum H)

    Weight lbs 7,74

    Housing for Kensington MicroSaver Security lock

    Turn on the password

    Accepts 3rd party locking safety devices

    Software

    Operating system:

    Genuine Windows Vista Home Premium 64-bit with Service Pack 1


    Hi, people.

    I was able to reproduce the problem here, so the good news is that you're not imagining things.  We are looking in the options right now for you guys, and I will contact you individually by private message to start again at the top.  This being said, please note that our techniques, Vista is an operating system that is not supported, and our team is not stable time on this platform.  We will do the best we can and we will keep you guys, update as to what status is.

    Thank you

    -Elaine

  • Firefox does not start after the computer restarts

    Install Firefox, works great. Restart the computer, Firefox does not start, or finally when it tries to start the script errors occur. If I reinstall Firefox after restart of a computer, it works fine, once again when the computer is stopped at the next startup it is, will not be able to use Firefox. Firefox does not start in Firefox Safe mode, does not start in windows safe mode. Do not add now, nothing has been added, just the Firefox installer played complete the system restore on the computer, same problem. Windows 7 Pro. Remove Firefox from windows control panel, restart your computer, install firefox, will take place. shut down the computer, put on the computer, firefox does not start, or crashes. I am exploring now Web interface.

    I reinstalled Firefox, so it will run in order to perform the steps below.

    Here is the answer which took care of the problem,

    http://KB.mozillazine.org/Browser_will_not_start_up#Problematic_plugin_prevents_browser_from_starting

    "Site Web TrueSuite Log On" plugin (AuthenTec), is the question.

  • vCenter does not start after the upgrade from 5.1 5.1 U1b (UNIQUE authentication failed)

    Hello

    We have upgrade to vCenter Server (build 880146) 5.1.0a to vCenter Server 5.1. U1b and now vcenter service does not start

    This is the log:

    2013 10-21 T 10: 58:40.221 + 02:00 [02800 info '[OSP]'] [UserDirectorySso] GetUserInfo (Administrators, true)

    2013 10-21 T 10: 58:40.221 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [GetDomains]

    2013 10-21 T 10: 58:40.252 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [LazyInitAdmin] initialization

    2013 10-21 T 10: 58:40.252 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [InitSsoAdminServices]

    2013 10-21 T 10: 58:40.252 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [CreateAdminSsoServiceContent] try to connect to the administration of the SSO server.

    2013 10-21 T 10: 58:40.330 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [InitSsoAdminServices] successfully.

    2013 10-21 T 10: 58:40.330 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [LoginToAdmin]

    2013 10-21 T 10: 58:40.330 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [CheckTokenValidity]

    2013 10-21 T 10: 58:40.330 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [CheckTokenValidity] refreshing SSO token...

    2013 10-21 T 10: 58:40.330 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [RefreshSsoToken]

    2013 10-21 T 10: 58:40.408 + 02:00 [02800 error "[OSP] [SsoAdminFacadeImpl]"] AcquireToken [RefreshSsoToken] exception: failed authentication: authentication failed

    2013 10-21 T 10: 58:40.408 + 02:00 [02800 info '[OSP]'] [UserDirectorySso] GetUserInfo NormalizationException: RemoteGetDomainNames RuntimeServiceFault exception: sso.fault.RuntimeServiceFault

    2013 10-21 T 10: 58:40.408 + 02:00 [02800 error '[OSP]'] [UserDirectorySso] NormalizeUserName AuthException: allow exceptions

    2013 10-21 T 10: 58:40.408 + 02:00 [02800 error '[OSP]'] [UserDirectorySso] GetDefaultPrincipal AuthException: allow exceptions

    2013 10-21 T 10: 58:40.408 + 02:00 [02800 info '[OSP]'] GetDefaultPrincipal(, true) [UserDirectorySso]

    2013 10-21 T 10: 58:40.408 + 02:00 [02800 info '[OSP]'] GetUserInfo(, true) [UserDirectorySso]

    2013 10-21 T 10: 58:40.408 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [GetDomains]

    2013 10-21 T 10: 58:40.408 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [LazyInitAdmin] initialization

    2013 10-21 T 10: 58:40.408 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [InitSsoAdminServices]

    2013 10-21 T 10: 58:40.408 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [CreateAdminSsoServiceContent] try to connect to the administration of the SSO server.

    2013 10-21 T 10: 58:40.439 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [InitSsoAdminServices] successfully.

    2013 10-21 T 10: 58:40.439 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [LoginToAdmin]

    2013 10-21 T 10: 58:40.439 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [CheckTokenValidity]

    2013 10-21 T 10: 58:40.439 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [CheckTokenValidity] refreshing SSO token...

    2013 10-21 T 10: 58:40.439 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [RefreshSsoToken]

    2013 10-21 T 10: 58:40.502 + 02:00 [02800 error "[OSP] [SsoAdminFacadeImpl]"] AcquireToken [RefreshSsoToken] exception: failed authentication: authentication failed

    2013 10-21 T 10: 58:40.502 + 02:00 [02800 info '[OSP]'] [UserDirectorySso] GetUserInfo NormalizationException: RemoteGetDomainNames RuntimeServiceFault exception: sso.fault.RuntimeServiceFault

    2013 10-21 T 10: 58:40.502 + 02:00 [02800 error '[OSP]'] [UserDirectorySso] NormalizeUserName AuthException: allow exceptions

    2013 10-21 T 10: 58:40.502 + 02:00 [02800 info '[OSP]'] GetUserInfo(, true) [UserDirectorySso]

    2013 10-21 T 10: 58:40.502 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [GetDomains]

    2013 10-21 T 10: 58:40.502 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [LazyInitAdmin] initialization

    2013 10-21 T 10: 58:40.502 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [InitSsoAdminServices]

    2013 10-21 T 10: 58:40.502 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [CreateAdminSsoServiceContent] try to connect to the administration of the SSO server.

    2013 10-21 T 10: 58:40.533 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [InitSsoAdminServices] successfully.

    2013 10-21 T 10: 58:40.533 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [LoginToAdmin]

    2013 10-21 T 10: 58:40.533 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [CheckTokenValidity]

    2013 10-21 T 10: 58:40.533 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [CheckTokenValidity] refreshing SSO token...

    2013 10-21 T 10: 58:40.533 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [RefreshSsoToken]

    2013 10-21 T 10: 58:40.595 + 02:00 [02800 error "[OSP] [SsoAdminFacadeImpl]"] AcquireToken [RefreshSsoToken] exception: failed authentication: authentication failed

    2013 10-21 T 10: 58:40.595 + 02:00 [02800 info '[OSP]'] [UserDirectorySso] GetUserInfo NormalizationException: RemoteGetDomainNames RuntimeServiceFault exception: sso.fault.RuntimeServiceFault

    2013 10-21 T 10: 58:40.595 + 02:00 [error 02800 "Default"] cannot add the default permission: user not found

    2013 10-21 T 10: 58:40.595 + 02:00 [error 02800 "Default"] cannot start allow - system has no access rule

    2013 10-21 T 10: 58:40.595 + 02:00 [error 02800 'Default'] [Auth] initialization failed: < class Vmacore::Authorize:AuthException(Authorize_Exception) >

    2013 10-21 T 10: 58:40.595 + 02:00 [02800 error 'authvpxdAuthorize'] could not initialize security

    2013 10-21 T 10: 58:40.595 + 02:00 [02800 WARNING "VpxProfiler"] ServerApp::Start [TotalTime] took ms 27456

    2013 10-21 T 10: 58:40.595 + 02:00 [02800 info 'Default'] judgment of VMware VirtualCenter.

    Hello

    VMware support solve my problem:

    We have seen two issues after the update.

    First of all, there is no user of the solution for the virtual center when I checked the application users with SSO to the webclient service administration page.

    Solve us this problem of repointing Virtual Centre to the next according to the kb SSO instance;

    http://KB.VMware.com/kb/2033620

    1. repoint.cmd configure vc - search server https://vcenter.com:7444/lookupservice/sdk - password "laquesea" - openssl-path of the user "[email protected]"-"C:\Program Files\VMware\Infrastructure\Inventory Service\bin."

    After that, the modules in the vpxd.cfg solution was not properly updated and an operation manual.

    C:\ProgramData\VMware\VMware VirtualCenter\SSL\sso.crt

    vCenterServer_251703

    C:\ProgramData\VMware\VMware VirtualCenter\SSL\sso.key

    Above is the corrected version having replaced "null" with the correct path to the files of certificate and key.

    This allowed vcenter service start successfully.

  • Firefox does not start after the places.sqlite opening in Notepad

    Firefox does not load again. I tried to create a large folder of bookmarks, but I wanted them to hide so I tried to be clever and create a copy of my current places.sqlite who had no bookmarks added and moved elsewhere, then I added bookmarks and once that replace the current places.sqlite then I created a copy of this and put it elsewhere for more security and then I replaced it with the first places.sqlite I had copied. I had to go through that much trouble because for reasons, I was unable to delete the bookmarks by right-clicking and selecting delete. I had already tried to open places.sqlite in Notepad and since then is when it started to happen. I tried to reset the file extension type, or rather detached, but I can't figure out how. I also tried to remove completely any Mozilla partner, restarted my computer and then reinstall Mozilla, but it didn't work and I prefer not to try again or uninstall it because my computer has a very difficult time even boot Windows 10. He likes to get on the desktop and then never hang while I have to restart the computer continuously until it works.

    Can someone tell me what to do or where it is that I was wrong?

    Do a clean reinstall and delete the program folder before Firefox to (re) install a new copy of the current version of Firefox.

    If possible to uninstall your current version of Firefox to clean the Windows registry and settings in the security software.

    • Do NOT remove the "personal data" when you uninstall your current version of Firefox, because this will remove all profile folders and you lose personal data such as bookmarks and passwords including data profiles created by other versions of Firefox.

    Delete the program folder Firefox before installing newly downloaded copy of the Firefox installer.

    • (32-bit Windows) "C:\Program Files\Mozilla Firefox\"
    • (Windows 64 bit) "C:\Program Files (x 86) \Mozilla.

    Your bookmarks and other personal data are stored in the Firefox profile folder and will not be affected by a uninstall and (re) install, but do NOT delete personal data when you uninstall Firefox which removes all Firefox profile folders and you lose your data.

    If you keep the problems, and then create a new profile.

  • Lightroom does not start after the upgrade to Windows 10, Version 1511, 10586

    Hi all

    After the upgrade to Windows 10, 1511 Version, lightroom 10586 CC can't be launched. Adobe cloud nor any link office or file system path to the files directly program. Lightroom.exe can be seen in the Task Manager for a second and then disappears to nirvana. No answer, no trace.

    What should do?

    standard things as uninstall - re - install, stop between the two, log out of the clouds - connect to the cloud, register of audit were made in several variants without success!

    Kind regards

    Robert

    Thank you hipolitorodrigues,

    your answer showed me the way. I found a solution more simple in a parallel thread, whose response brought back LR to life.

    CU, Robert

    8  re: does not start Lightroom CC

      

       Tanuj Sandal   14.12.2015 19:41 (als Antwort auf: antonk97314826)

    Go to the Panel, then programs and features.

    Please select Microsoft Visual C++ 2012, 2013, and fix it.

    Restart the computer and then let me know if the application works.

  • Firefox does not start after the 3.0.1 update

    I have Firefox 3.0.1. I would like to upgrade to 3.6, but if I try to upgrade to any version, I can't open Firefox. It is not like the other problems "Does not", because in the Task Manager, firefox.exe appears, then disappears instantly. I tried in Safe Mode, do a clean install of uninstall Firefox and my profile, cleaning the registry, then using CCleaner, then try reinstalling but the problem persists. Sometimes firefox.exe is not even appear in the Task Manager. I can also use any version of IE (even if I wanted to), Safari or Chrome. They have all the same results. I suspect that this isn't a problem with Firefox, but with my computer, but I don't what is wrong. Can someone help me?

    This has happened

    Each time Firefox opened

    == I upgraded from 3.0.1

    Thanks for your tip on the killer of program. There was a program on my computer called Naomi Filter. I didn't know what it was until I saw this and he looked up. It turned out to be an internet filter which automatically closes the browser. I don't know why 3.0.1 works, but I deleted it and Firefox and Chrome work perfectly now. Thank you!

  • Windows XP mode virtual machine does not start after the upgrade to Windows 10

    Hello

    After the upgrade to Windows 7 Pro for Windows 10 Pro, my virtual Windows XP machine (which was created from the "XP" mode in Windows 7) no longer starts.

    It shows:

    This system is not allowed to run "Windows XP Mode". Now, the virtual machine will be turned off.

    How can I activate the Windows XP Mode in Windows 10 Pro? I mean, I have not lost my right to run Windows XP Mode, just because I've upgraded to Windows 10, right?

    VMware Workstation 12.1

    Hello

    How can I activate the Windows XP Mode in Windows 10 Pro? I mean, I have not lost my right to run Windows XP Mode, just because I've upgraded to Windows 10, right?

    I fear that the statement is pretty much on the mark.

    Microsoft caught only supported XP Mode in Windows 7, it has been since Windows 8.

    See also:

    https://support.Microsoft.com/en-us/KB/2724115

    You might be able to extract the folder integer vhd it and import it in VMware Workstation as a separate virtual machine. In the end, 'XP Mode' just was running a virtual machine in your Windows 7 after all.

    --

    Wil

  • My Xperia Mini does not start after the upgrade (flashing red), WHY?

    I just updated my Xperia Mini for Android 4 use Upadate Service, once the installation is finished the phone does not start, and instead of green light, red light flashing, WHAT should I DO?

    the indicator turns yellow/orange, if you are connecting to the carger wall?

    Don't forget to mark the correct answers & useful answers

  • Pavilion DV6-2140ED: Pavilion DV6: 10 Windows does not start after the upgrade memory (4 GB-&gt; 8 GB)

    After I upgraded the RAM in my HP DV6 from 4 GB to 8 GB (2 x 4 GB Kingston KTA-MB1333 / 4G), Windows no longer starts. I get a blue screen and it keeps restarting.

    I think that the memory specifications are similar to the Samsung M471B5673EH1-CH9 original memory: Ghz 1333, non - ecc, 1.5 volts, case latency 9 etc.etc.

    It's a laptop DV6-2140ED HP with a processor Intel i5 - 430 m and Intel mobile chipset HM55.

    The bios detects 8 GB and it also passes the check/test of memory. As far as I know that I have also installed the latest bios firmware: F.1D. Reinstall my Windows 10 64 bit does not work either: with 8 GB I also get blue screens, after I try to boot my Windows 10 bootable USB drive.

    I read other people having the same problem, but I have not read a solution yet. What can we do about it?

    Hello:

    Please see this discussion.  You buy a very specific memory for any HP laptop with Mobile Intel 5 series chipset.

    http://h30434.www3.HP.com/T5/notebook-hardware-and-upgrade-questions/memory-upgrade-6550b/m-p/5340551/highlight/true#M207994

  • Pavilion HDX 16: Windows 7 does not start after the upgrade to Windows 10

    Hello

    I have a system to dual-boot with windows 7 and ubuntu (with Windows 7 and NeoGrub Bootloader Windows Boot Manager).

    Recently, I upgraded from windows 7 to windows 10 via free upgrade offered by SM. However, I didn't like windows 10 and tried to upgrade to windows 7 by the following settings-> update of the security & -> Recovery-> Go Back to Windows 7.

    After the long process of decommissioning, cannot start windows 7 and the "Startup Repair" tool began to run. However, he could not solve the problem. Other recovery options 'system restore' and 'image system recovery' is not such that it could not find any restore point or the image created previously (I'm sure it were created before upgrade restore points).

    So, although I can boot ubuntu without any problem, I can't start windows 7. After the "starting windows" screen, I get the blue screen (a problem has been detected and windows has been shut down...).

    I intend to use the DVD to install windows 7 for repair, but

    (1) I don't know if I can boot from the CD because it is a dual-boot configuration

    (2) I'm afraid of losing work ubuntu OS.

    I appreciate if someone can help me find my Windows 7. I thank very you much for your time.

    Sorry, but there are a lot of reports on forums of Win10 the option of GoBack does not always work correctly.

    You should be able to boot properly from the same DVD of Win7 if you dual-boot with Ubuntu, but be aware, if the startup repair works (you may need to run three times), it will replace the link to start Linux in the MBR and after that, the machine starts immediately to Win7.  You will need to reinstall GRUB to get Ubuntu boot back.  You may be able to fix the boot of Ubuntu using repair boot: Boot-Repair - Community Ubuntu Documentation

  • XPS 8700 does not start after the upgrade memory RAM

    Dear members of the Forum.

    I have a XPS 8700 with the following specifications:

    Core i7 4770 k

    2 TB HARD DRIVE

    16 GB of Ram (4 x 4 GB)

    NVidia GTX 660 (1.5 GB)

    BIOS version A10 (later).

    RAM sticks in my current system are all Micron Tech (here) 4 GB DDR3 SDRAM PC3 12800 240pin 1.5V 1600 MT/s.

    I had two RAM modules of tech Micron (here) 8 GB DDR3 SDRAM PC3 12800 240pin 1.5V 1600 MT/s so that I can move on to a total of 24 GB.

    After the discussion here and here, I installed the modules in slots 1 & 2 (both white) so that the system is not able to start. Not even got the bios screen. I also tried 3 & 4 configuration (both black) I ran my computer with the two 8 GB sticks only, with the same unfortunate results.

    I also saw that it is a normal problem of compatibility problems between the types of ram, but I consider that this is not the case. In addition, bad positioning of the modules is not also the case because if I put my old ram glue the computer starts normally.

    I used tape you will static isolation.

    Is the problem, a problem of compatibility between my computer and the RAM modules?

    If the RAM is damaged does these effects (do not start)?

    How can I check if the RAM modules are damaged?

    What would be your suggestions?

    I thank very you much in advance!

    Mauricio

    Hmm, I'd say you two bad sticks of RAM.  If the system POST even with them, I would swap them if you can.  We know that the RAM slots work because you have 4 x 4 sticks without any problem and your computer can take up to 32 GB of RAM.  Your admission that you bought the right kind of RAM, voltage, and speed, etc., so that shouldn't be a problem.  I would say as bad RAM.  When you do not install, just check that you make pairs in each of the colored slots, for example. matching pairs in the slot of white and black.

  • ISE Application does not start after the upgrade to version 1.2

    Hello

    We have a customer who uses a device of ISE-3315 hardware running 1.1.4.218 Patch1. He had to take 1.2 Patch 2 to support iOS7. There is no secondary device so it is a stand-alone deployment.

    We did the upgrade according to Cisco documents (backup, patch the current to the last patch, perform the upgrade). It all seems to have gone through successfully. I can access the CLI through SSH, but application services will not start. I tried to stop and start services (application stop ise / ise to start the app), but I get the following message:

    LSE / ise to start the admin application #.

    Waiting up to 20 seconds to lock: APP_START for complete

    Database is always blocked by lock: APP_START. Abandonment. Please try again later

    % Error: another process ISE DB (APP_START) is current, cannot perform to start the Application at this time

    I waited for half a day, but it remained the same. Also configure the controls as application or application config-reset do not work. restart the ISE has failed as well.

    A someone has encountered this problem and solved? My next idea would be a pure re install 1.2 ISE and then restore the backup.

    Kind regards

    Patrick

    I had a problem with the upgrade of MnT DB for an ISE 1.1 to 1.2 upgrade ISE.  It got stuck for hours.  On appeal by TAC, that is exactly what they advised.  Install a fresh node and restore the backup.  It converts it to 1.2 during restoration.

    The TAC engineer, I rubbed also admitted that they had very mixed in the 1.1-> 1.2 upgrade so that they were recommending new installation and restore the configuration.

  • Lightroom 6 (not CC) does not start after the upgrade of the LR5

    Hi, first of all, I don't use CC.

    I upgraded my copy of Lightroom 5.7 last week and used LR6 for about 2 days before this problem started. I opened LR6, the splash screen appears and nothing else happens. The Task Manager shows LR6 does not, and no amount of lift tasks or reboots gets my open catalog.

    I uninstalled LR6, then reinstalled. It seemed to work, but only the first time I opened my catalog. I tried again, the upgrade of my old catalog again, but the same problem. It's been a week later, I'm still not able to use LR6 and would like to know what the problem is. I have no intention to move towards CC either.

    I'm on PC, i5, 8 GB of RAM, NVIDIA GTX 660 video card. I moved my catalog of a second disc on my c:. My photos are on a third internal drive.

    I've never had a problem with previous versions of Lightroom like this before. In addition, my cpu is overclocked to 3.4 GHz to about 4 GHz. I have normally no crashes or programs not responding.

    can anyone help?

    Thank you

    We got your back, right on the first page of this forum!

Maybe you are looking for

  • Caseback C655 15.6 fit model C665

    I have a satellit c665 pro can't find a botom deal because it bur I can find deal bottoms for the c655 both are 15.6. On the photos, they are exactly the same. Can someone tell me if it will work. Thank you

  • Problem with the multiline ToolTip

    I like tooltips (even if I open many wishes, see here, here, here, here, here and here ), but now, I found a problem if we use a ToolTip that consists of several lines and its control is located near the bottom of the screen. ToolTips are smart enoug

  • service pack 1 error

    "Windows vista service pack 1 (KB936330), download size 1.9 MB keeps getting proposed in windows update, but does not appear in the Windows edition, or in ' view installed updates ', what should I do?

  • write database sometimes fails

    Hi, I was alerted to a problem by the users of my application that I was finally able to see for myself. My app creates a .db to the folder shared/misc if does not already exist for the part without head can also be accessed. I can reproduce the erro

  • DVD RW drive properties window: what "use error correction" average / under Rip options when digital is selected?

    I noticed that an option in the Properties window of my Player DVD RW - under "Rip", when "Digital" is selected, there is the possibility to check a box "use error correction. I'm a DJ some of my older CD digital - ripping so I wonder if this option