Firefox doesn't recognize the new printer.

Similar Questions

• BIOS doesn't recognize the new drive to CD/DVD on TECRA S1

  Replaced my default drive SD-R2412 with a new SD-R2512. Unfortunately, when I boot the drive is not recognized. Any help or advice gratefully received.

  Thank you very much

  Kevin

  Hello

  Don t think you would be able to solve this problem without to replace the CD/DVD drive again.

  You get an IDE #1 error message. Am I wrong? This happens because your CD/DVD drive supports master/slave/c-salt settings wrong!
  Because no compatible settings BIOS cannot recognize it properly.

  In your case I would contact the local ASP for more information on compatible CD/DVD players and get a new one.

  Good luck

• Problems connecting to a projector. Laptop recognizes the new monitor but projector does not display anything.

  I have a Macbook Pro (non-retina display) mid-2012. I have a mini VGA screen that worked throughout the year and all of a sudden, it doesn't seem to work. My computer recognizes the new monitor (screen flickers and flies all content secondary screen) but the projector does not display anything. I tried to reconnect the cable, the cable VGA switch to turn on the projector and turn off, restart my computer and clouds of dust on the connections. Sometimes if I move the connection just that will work, but if I so much as breathe on it or watch funny it stops and I can't get it back.

  Jiggle the cable or adapter is something different, you have a physical adapter or cable problem. Any bit-reversal can help that.

• Western Digital WD10EARS internal hard drive Caviar Green 1 TB - my system does not recognize the new drive

  I recently bought a computer Dell 4700 to a friend with Windows XP installed. I've updated the memory to 2 GB and now seeks to install a WD10EARS 1 TB harddrive. The new works of fine memory is not the hard drive. My system does not recognize the new drive. I contacted WD for help and they told me to try diferent rider combinations that were Jumper 1-2 and 5-6, still does not work, I checked the hardware compatibility list and he said he would start uo without modification. This isn't. I would be very greatlyful for any suggestions, to HELP!

  I've had several people tried to help me solve my problem. They were all, I thought, more than I am computer savvy. As time progressed, solutions became more complex. After they all left without resolution I thought and it appeared to me that the simplest solution might be correct. One person had checked. I turned on the computer and when the Dell logo came I pushed the F12 key to open the Dell configuration screen. The drive on which the new drive has been installed has NOT been activated! Duh! I activated the he and the program Acronis recognized and everything went like clockwork after that. Phew! What relief! Thank you for your comments I am just glad that my problem it doesn't require resolution. Are Mod

• C4385 does not recognize the new router

  Just changed internet service providers.  Although I used this vendor before and not had any problems with my printer, I now have a problem.  My C4385 will not recognize the new network.  Hp network connection software that I run has no effect.   It will not detect a network even if my computer shows an excellent connection to the network.

  When I run the wireless network test report it shows "FAIL" next to "Network Name (SSID) Found."  The recommendation is to "check that your HP printer (SSID) name exactly matches your name (SSID) wireless router.

  I am completely baffled by the present.  I've seen other questions that are similar to this, but none that refer to my model exactly.  Any help is appreciated.

  Please, try the following:

  1. disconnect the USB cable from your printer

  2. make sure to delete any previous copies of your HP printer from the printers (in Control Panel) screen

  3. restart your PC

  4. under the printers screen, enter the following print server properties screen:

  XP: File > print server properties

  Vista: right click on the area of the screen information, and then select run as administrator > print server properties (law as Administrator option will not allway appear)

  Win7: Select any other printer in a left click and you will see the properties of the print server to the Menu bar top

  On the Ports tab, be sure to remove any existing TCP/IP port.

  5. remove temporarily disable your firewall software

  6. start the installation and select reconfigure the network connection / add a device.

• OfficeJet Pro 8100 does not recognize the new router

  I saw this question for other printers, so I hope that there is a response to mine.  I just upgraded the speed of my internet service which involved a new router.  We made sure all the computers in the House worked with her, but I forgot to try the printer before the technician left.  Now my computer thinks printer Officejet Pro 8100 is offline (turned off) and the blue light on the printer blinks.  How can I get the printer to recognize the new router?  I guess I have to add that I do not know where to find the code of the intellectual property that is asked for when I go to the start menu, the HP folder, select my printer, etc.  He said: push the button on my printer wireless, so I push button blue flashing light but that does not produce a number.  Help appreciated!    It's an ATT router and I have the WiFi network name and wireless password.

  Replacement of your wireless router try here.

  http://www.HP.com/global/au/en/wireless/reconfiguring-system-Help3.html

• I want to import bookmarks from Safari on same Mac computer. Said Firefox Help Bar Menu/file/import. My Firefox doesn't have the file/import option. How to import bookmarks from Safari to Firefox?

  I want to import bookmarks from Safari on the same Mac computer. Firefox
  Aide said use bar Menu/file/import.
  My Firefox doesn't have the file/import option.
  How to import bookmarks from Safari to Firefox?

  10.2 Firefox on Lion does not import and backup under Show all bookmarks or the file import wizard and the option to import during the installation of Firefox did not work. Private browsing is not on. How to import bookmarks?

• Tecra P4 not to recognize the new HARD drive

  Hi all

  I have a Tecra P4 - PTS40A-02100V, which does not recognize the new drive of 80 GB Hitachi (HTS541080G9SA00). The laptop is out of warranty and replacement drive was purchased. This is the second new floppy disk that the supplier sent me. The provider is an official supplier of Toshiba in Australia. Customer paid ~ $400AUD to the drive, if that could be a costly exercise.

  I am able to get a vanilla Toshiba restore to work on the PC, but our organization uses WinPE based boot environment PXE for the kickoff of image and the version of Windows XP. It is not possible to use a generic Windows XP in our environment.

  DiskPart in WinPE will not recognize the disc. Partition Magic and other popular applications will recognize the disc, others not. I can create an NTFS partition and format. Can create basic MBR and MFT, no chance to recognize. Also, I can use the drive in a caddy USB Windows XP on another end PC.

  This new drive appear the same questions in a known working P4. I don't see any option in the BIOS to work around the problem. I updated the BIOS to v3.20, but the result is the same.

  Clues?

  Hey Buddy,

  Just to test: is it possible to install Windows from the Toshiba Recovery disk? Have you tested this?

  And interesting to know what the authorized service provider said of this behaviour. Did you already ask guys?

• I'm trying to get my computer to change printers, but it does not recognize the other printer.

  I have HP 2410 PhotoSmart all-in-one printer.  I used this drive to install it on three other computers.  So I know it's the right disc for this printer.

  I now have a NEW computer and a printer that I used.  The new printer is giving me.  He came with a disk and it says that I need a "Reinstall".
  Instead, I decided to just go back to my old printer for awhile.  But now the drive will not pick up the old printer.  He is looking for the newest printer is out of use.
  At least that's MY opinion.  What now?

  Hello

  1. What is the brand and model of the new printer?

  2. these computers is on a domain network?

  3. what happens when you tried to install the new printer?

  Looks like that the printer needs a new together drivers to make it work. The best thing you can do is that you can download and install the drivers manually on the printer manufacturer website. You need to find the correct drivers.

  Reference:

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Update drivers: recommended links
  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

  Once the printer is ready, you can change the printer and set a default to use according to your wish.
  Note: applies to Windows Vista and more.

  Reference:
  Change your default printer

  http://Windows.Microsoft.com/en-in/Windows7/change-your-default-printer

  Hope this information helps. Response with status so that we can help you.

• Epson sx438w does not recognize the new ink cartridge

  Epson sx438w does not recognize the new ink cartridge, when change original are

  Contact Epson.  This isn't a problem of Windows or Microsoft.  They should be able to help or offer troubleshooting instructions.

• Windows Media Player doesn´t recognize the subtitles on my movies

  Windows Media Player doesn´t recognize the subtitles on my movies

  Hello

   
   
   
  1. what operating system is installed on the computer?
  2. If it works well before?
  3 did you changes to the computer before the show?
  
   
  Method 1: Open the troubleshooting Windows Media Player settings Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter
  
  Method 2:
  
   
  Follow the steps mentioned below:
   
  (a) open Windows Media Player
  (b) click the game menu, point to lyrics, captions and subtitles, and then click the applicable.
  
  Reference:
   
  Show or hide the menu bar in Windows Media Player
  http://Windows.Microsoft.com/en-us/Windows7/show-or-hide-the-menu-bar-in-Windows-Media-Player

• HP Solution Center does not recognize the network printer

  Network has a hp 309 a printer, can print from the computer, the problem is:

  HP Solution Center not load-says incomplete installation.  If I plug in the USB cable and let it continue, it sets up a second printer that only works on the USB cable and it still does not recognize the network printer.

  Question how can I get the Hp solution program to reward the network printer.  If I reload the CD, then reinstall the will other people on the network of the problems?

  Resettlement on your machine won't affect only you, no other machines on the network.

• Fuze doesn't recognize the MPEG-4 audio layer - any suggestions?

  Fuze doesn't recognize the MPEG-4 audio layer - any suggestions?

  I have loaded a series of MPEG-4 audio layer files on my rocket. I can see them on the "rocket" when I consider my computer but not the "rocket" itself.

  Anyone know what I'm doing wrong?

  Thank you

  Donn

  The Sansa times .mp3, .wma. OGG, FLAC and .wav. It cannot decode m4a or mpeg-4.

  Are downloads of iTunes? Apple doesn't want read you elsewhere on your computer and whatever this dopI little pocket music player they do is called?   M4a and .aac are owners of Apple formats.

  You must extract these files from CDs in mp3, or if you do not have CD you will need to convert m4a to mp3. Download the free media encoder and conversion (transcoding) these files mp4 to mp3 high quality, 192 Kbps or higher. If you use more low-quality mp3 will save you space, but the sound quality will suffer.

  And if you use iTunes to rip a CD, you can change the settings (in Edition/Preferences/Advanced/import music, which differs from the advanced visible tab) to mp3 instead of m4a files when rip you.

  If your files are m4p, the p is for protégés who are protected against copying the files, which means that you're not supposed to move on another device.  The only way to convert is to go into the underground world of pirate.

• Doestnt Smartphones blackBerry Desktop Manager recognize the new operating system

  I downloaded the new OS device for 8520 in my PC, but the Director of office don't informs me of the new OS.does this 7.1 version recognizes the new device OS after being downloaded on PC? Help me guys

  BlackBerry Desktop Software will recognize an OS that is released by your carrier.  If you downloaded from another carrier and has not removed the 'seller .xml' file, he will see that it is not your provider and it will not show depending on availability. If you have downloaded it from another carrier, look in these forums for instructions on how to load an operating system on your phone and you will be shown how to properly remove this file, which is located in several locations.

  I hope that helps you.

• How to get Camera Raw to recognize the new Nikon D500 camera raw files?

  How to get Camera Raw to recognize the new Nikon D500 camera raw files?

  Devices supported by Adobe Camera Raw

  The D500 has been supported since camera 9.5 Raw which is only compatible with versions of Photoshop CS6 and Cloud.

  What version of Photoshop are you running?