Firefox drops letters when using Franklin Gothic times, but not Safari

Similar Questions

• Disable the menu bar, the option apears in my Firefox 3.6 X using Windows XP SP3, but not in the same version with Ubuntu 10.04

  With the help of dual boot OS, Windows XP SP3 / Ubuntu 10.04. Even Firefox v3.16.13. In windows, using the button display in the menu bar, I can't turn off the menu bar. You use Ubuntu, the same option is available in "display".
  I used "subject: Config" before, but I'm very careful and document all changes. Any time I need to access the menu items, using windows, I just use alt = _.

  In versions of Firefox 3.6 you can hide the bar of menus under Windows and not Linux. In Firefox 4 beta current versions you can hide the Menu bar and have the greyish Firefox button instead and use F10 to temporarily show the Menu bar, so you need to wait or try the beta version .

• distortion sound when using the media player but not any other media suite e.g., be able to go

  I have a new samsung 305th and sound playback for the media player is distorted on the helmet and built in speaker, but all the others like suite of media and power go her crystal clear. makes all kinds of settings and checked sound card, what is the problem? Fix, it has found a problem but says to contact the manufacturer.

  Hello

  1. what fixit did you run?
  2 were there any hardware or software changes made on the computer before this problem?

  Carry out the methods to solve the problem.

  Method 1
  Run the troubleshooting windows media player setting and check if the problem persists. Follow the steps described in the following link:
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

   

  Method 2

  Try disabling audio enhancements and check if that helps.

  (a) open her by clicking the Start button, then Control Panel. In the search box, type sound, and then click sound.

  (b) on the playback tab, click speakers, and then click Properties.

  (c) click the enhancements tab, and then select the checkbox disable all improvements .

  If you do not see the enhancements tab in the speakers properties dialog box, these features are not available for your speakers, and this procedure is not applicable to your computer.

  If disabling audio enhancements solves the audio problem you are having, this indicates usually that your audio driver needs to be updated.

  Also remove the audio codec in Windows Media Player.

  (a) open windows media player, and then press Alt key.

  (b) click on Tools, select plug-in and click on the option.

  (c) select plug-ins tab, and then under category, click Audio DSP.

  (d), select all the files in the DSP Audio box and click Remove.

   

  Method 3: Check if the problem persists in the boot.

  To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to solve the problem by running the clean boot in Windows 7
  http://support.Microsoft.com/kb/929135

  Note: Once you have completed troubleshooting, perform the steps in the step 7: to reset the computer as usual.

  See the help article
  Tips for solving common audio problems.
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

  Let us know the status of the issue.

• My panels are not displayed when I click on it in the menu drop-down windows. The box appears but not the Panel. Can anyone help?

  My panels are not displayed when I click on it in the menu drop-down windows. The box appears but not the Panel. Can anyone help?

  Try to reset your preferences using Cmd (LTRC) - Opt (Alt) - move when restart you the version of AI. Did you once two monitors?

• rolling works 1st time but not 2 times

  / * _parent._parent._parent._parent.rackImage.loadMovie ("test.jpg", rackImage_mc) * / works fine the FIRST time but not the second time.

  It deletes the variable / * var rackImage * /?

  function rackBtn (point) {}

  _parent [point + "_mc"] .onRollOver = function () {}

  _parent._parent._parent._parent.rackImage.loadMovie ("test.jpg", rackImage_mc);

  }

  _parent [point + "_mc"] .onRollOut = function () {}

  _parent._parent._parent._parent.rackImage.removeMovieClip ();

  }

  }

  It accesses this variable...

  var rackImage = this.createEmptyMovieClip ("rackImage_mc", 30);
  rackImage._x = 0;
  rackImage._y =-300;

  This line:

  _parent._parent._parent._parent.rackImage.removeMovieClip ();

  delete _parent._parent._parent._parent.rackImage

  and generally, everything that should be displayed onRollOver shouldn't be charged: Add this image to your library and use attachMovie().

• I made a music video in Flash and it won't play on the timeline, and I can't scroll through it either. He plays when I press Ctrl + Enter, but not in the timeline panel. It worked perfectly before, but now for some reason it doesn't. Help, please

  I made a music video in Flash and it won't play on the timeline, and I can't scroll through it either. He plays when I press Ctrl + Enter, but not in the timeline panel. It worked perfectly before, but now for some reason it doesn't. Help, please

  It is the nature of the movieclips. They play only when you make a film Test. If you want an animation that plays when you scrub the timeline, select the element and change it to be a chart instead. You can do this in the properties panel.

• When I click on the shortcut it does not open firefox but if I hold the cursor on the short cut it shows tabs from last time, but not open them

  But if I hold the cursor on the short cut, that it shows the last tab and how many pages come from my last visit, but will not open them no matter how many times I click it

  If you think that your Firefox window can be "off-screen" somewhere, what happens sometimes to certain users, this discussion has a few things to heal that: when I go to open firefox it appears on my toolbar, but not on my screen where it is?

• Ive lost my dock when using lightroom. He's not going anywhere! How can I fix it?

  Hello!

  I have an old program macbook and lightroom. I need access to the docking station to get my photos in the card from there and the camera raw in Photoshop and it will not come to the top (usually it is hidden at the bottom of my screen) the docking station is still on display in other programs, but not in lightroom.  What is going on? Help!

  You are probably using full screen.

  Try pressing SHIFT + F or twice.

• Step VI works at the time, but not by operating normally

  I am very new to LabView and have created a simple VI to register a single measure of my multimeter HP 34401 via a RS 232 connection.

  The problem I encounter is that the VI works when I run one step at a time (clicking the button on the stage has ended).  When I try to run the whole thing well, I get the following error:

  1073807339 error occurred read visa in Untitled 2

  Possible reasons:

  VISA: (Hex 0xBFFF0015) timeout expired before the operation is complete.

  After reading the help page for this error, I tried to add a delay time, but that did not fix the problem.

  (http://digital.ni.com/public.nsf/allkb/874B379E24C0A0D686256FCF007A6EA0)

  Trace of e/s NOR provided no answers for me, but I have attached a screenshot.  Lines 1-13 are the only step to run, the rest is to try to run the whole thing at a time.

  Can someone please help me understand what is happening here?  Thanks in advance!

  If anyone is interested:

  Windows 7

  LabVIEW 2009

  HP 34401 multimeter

  RS 232 connection is via a USB-serial adapter

  The only thing I can think is that you send the remote command and then do not wait long enough so that it complements.  The manual States:

  It is very important that you send the

  System: REMote command

  to put the multimeter in remote mode. Send or receive data

  via the interface RS - 232 when not configured for remote operation can

  give unpredictable results.

  And I think that we live unpredictable results.

  I don't know if you can change the command in a query using the * OPC? command, but use that could solve it - or we could run into the same issue due to the above caveat.  You may need a manual wait between the remote control and the "write" command.

• Firefox crashes at startup for a single user, but not another

  Crash ID: bp-df3a48d7-363c-4d2f-87d3-f73902140723
  Version: 31
  Crashes at startup for a single user, but not another. Both are directors.
  I uninstalled and reinstalled. No change to each user.
  Crashes in safe mode as well (hold down the SHIFT key)
  No present addons in the other user.
  Ran Malwarebytes and cleaned
  Ran CCCleaner and clean up all registry including uninstalled Firefox entries.

  This is not useful if firefox crashes at startup. because you cannot start to create the new profile.

• Why does my site display properly in Firefox but not Safari/Chrome?

  I have looked through all my code and do not understand why my previews site perfectly well in Firefox, but in Safari or Google Chrome all elements of the site work but the images that make up the background appear empty or with a blue question marks in a box on them.  I made the site by slicing layers in Photoshop then saved the HTML as a template and added the relevant divs.

  It displays a good overview on Dreamweaver as well but it is precisely these browsers on that it does not work.  It is used to preview very well on these browsers while I was doing it until I added the flash element to it, so I don't know if this has something to do with it, although all Flash elements appear and function ok.

  methumeddwl wrote:

  Thanks SnakEyes, I managed to get rid of the Alt error now.  My structure automatically becomes a tabular presentation due to the importation of the slices directly from Photoshop in a fixed layout?  All of a sudden I have all these new upcoming errors for no leftmargin, topmargin, marginWidth don't and marginheight as well as the height, so it would be ok if I just deleted all references to the latter in the code?

  Nancy Merci for these links to page layouts ready to use, they will definitely come in handy for my next site.  As I want my site to be a fixed 1024 x 700 does what a function table plan?  I want it be fixed instead of liquid that I want all the Flash animations to show in specific locations on the site.

  This is why you should not export the HTML from Photoshop.  To answer your question that exports only Photoshop like HTML 4.01, which is why he has these attributes.  In addition, everything is an image in a table cell, which leads to many problems.  Learn how to cut out pictures and use everything that CSS can offer will make better code.

• Keyboard type numbers instead of letters when using certain keys

  original title: NEED HE3 * 5T5TH 2EYS

  CAN N6T TY * E 5 LACK. THE N40BERSEE * 2EE * SH6W5NG 4 *.

  Looks like you have a laptop with the numlock. several letter keys are your keypad.

  for example.
  j = 1, k = 2, l = 3, u = 4 I = 5, o = 6, p = *.
  turn off the Numlock.

• Why Firefox will allow me to have several tabs, but not allow me to switch between tabs and can only watch a new tab when closing the previous?

  Everytime I open a new tab, it appears on the tab bar where it should, but if I click on it nothing happens, the tab does not open, and I can't switch between multiple tabs. The only way to get a new tab is to close one on that I am currently, and even then it will only open the next tab in the order of precedence, so I can't even choose which tab is next to see. This problem makes it impossible to use firefox as a research tool that requires quick change back and forth between pages in multiple tabs at the same time.

  Try Firefox Safe mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that disables certain parameters, disables most Add-ons (extensions and themes).

  If Firefox is open, you can restart Firefox Safe mode in the Help menu:

  • In Firefox 29,0 and above, click on the menu button

    

    click Help

    

    then select restart with disabled modules.

  • In previous versions of Firefox, click on the Firefox button in the upper left of the Firefox window and click help (or click on help in the Menu bar, if you do not have a Firefox button) and click on restart with disabled modules.

  If Firefox is not running, you can start Firefox in Mode safe mode as follows:

  • On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac: Hold the option key during the startup of Firefox.
  • On Linux: Exit Firefox, go to your Terminal and run firefox-safe-mode
    (you may need to specify the installation path of Firefox for example/usr/lib/firefox)

  When the Firefox Safe Mode window appears, select "start mode safe."

  

  If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. Please follow the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. This might help others with the same problem.

• Someone else has Apple Airplay jumping and drop outs when streaming music?  WiFi is not the problem, and there is nothing around the units of airtime to interference.  Impossible to listen to music.  Thanks for any advice.

  I've recently updated several broadcasts in my house from V1 to V2 in the hope of resolving a constant jumping and abandonment problem I always had when playing music with Airplay.  I have a unit of airtime plugged directly on my stereo receiver that feeds music throughout my house.  My WiFi connection is not the problem and there is nothing to cause interference.  Airplay modules are not more than 15 feet distance modem or range Extenders.  Someone else has this problem and, hopefully, a solution?   I'm tired of doing factory reset all the time.  Many thanks for any advice.

  I've recently updated several broadcasts in my house from V1 to V2 in the hope of resolving a constant jumping and abandonment problem I always had when playing music with Airplay.

  By "Airplays" what are you actually refers to... Base station airPort Express, Apple TV, or something else?

  ... and "V1 to V2" do you mean you replaced a 1st generation 802.11n AirPort Express with a 2nd generation?

  Airplay modules are not more than 15 feet distance modem or range Extenders.

  When steaming audio with AirPlay, the flow goes first to the device host to iTunes to the router Wi - Fi, this unit is connected to. From there, he will travel to the AirPlay "speaker". A president could be an AirPort Express, Apple TV or an AirPlay device ready another manufacturer. If you use line extensions, the flow must go through those as well... so there is potential bottlenecks between the host and the speaker. One of these could be the cause of the issue you found.

• Micro works not when using Skype. Problem is not with the microphone, but with Skype. Ive tried

  When you use Skype, my internal microphone does not work - friend says that he can not hear the voice, but he can hear other sounds - music on youtube for example. Ive tested the microphone on Skype Echo - it wasn't working at all. I tested it on a voice recorder - MIC was working properly. Also when I just started to use this laptop (3 days ago), I spoke with a friend through Skype for about 3 hours, and then he couldn't hear me suddenly annymore. If something is wrong with Skype. Computer consultant suggested me to contact Skype support technicians.

  In Skype, open Tools-> Options-> Audio settings. There is more than one option available in the selection box for Microphone?