FireFox has gone completely transparent and nothing works

Similar Questions

• My I Pad has gone completely dead. It is a model and just completely dead tw vertion. Anyone has an explanation please

  My I Pad has gone completely dead. It is a version2model and just completely dead. Anyone has an explanation please! I turned on and off and the top (or at least gone through the process) charged no sign of life at all. ???

  How long have you leave the charge for the iPad? It will take at least 30 minutes on the charger before an iPad with a completely dead battery react. Be sure to use the charger supplied with the iPad, or its equivalent. Do not recharge an iPad by connecting it to a USB port on the computer. After 30 minutes on the charger to reset the iPad. Press and hold the Home button and the sleep/wake button until the Apple logo appears. Then release the button and let the appliance restarts. You lose no data by doing this. It's like a restart of the computer.

  If the unit still doesn't start not to make an appointment at an Apple store to have a technician look at your device. Or contact the Apple Support.

• OfficeJet 6500 has 710n all LEDs on the front panel are flashing and nothing works. Any suggestions?

  As indicated in the subject line, all of the lights on the front panel are flashing and nothing works.  Will not communicate via cable or wireless. Green light is visible on the power supply. Suggestions?

  It seems that the printer needs to be reset.

  Cut the power to the printer for a minute. Reconnect the power to the printer and turn it on.

  Does have an effect?

• I recently had a new hard drive installed in my 2008 iMac. I'm trying to re - install office and the computer does not recognize my password. I tried all the passwords I can think of and nothing works and it wont let me continue

  I recently had a new hard drive installed in my 2008 iMac desktop computer, because right now I can't afford a new computer.   I am now under OS X El Capitan 10.11.4 and my password no longer works so that I can reinstall office microsoft for Mac.  I'm trying to change my password, but you must enter the old password and it does not recognize the password.  I tried every password I use and nothing works.  How can I change or get a new password?

  Reset the password.

  OS X 10.7 Lion, Mountain Lion, Yosemite 10.9 10.8, Yosemite 10.10 and 10.11 El Capitan

  Shut down the computer.

  Start the computer, and then press on and hold the command key and the R key to boot from the recovery partition.

  When you see the Apple logo, release the keys.

  Wait until the OS X Utilities window appears.

  Move the mouse pointer to the bar menu at the top of the screen, click on "Utilities" and select "Terminal".

  in the menu dropdown.

  Terminal window is displayed.

  TypeRegeditdans resetpassword and press enter on the keyboard.

  Reset Password Utility window will open.

  Leaving the Terminal.

  Select Macintosh HD, if not already.

  Select the user account in the menu popup box under "Select user account.

  Enter a new password.

  Re-enter the new password for the user.

  Enter a hint.

  Click on the Save"" button.

  Click  in the menu bar, and then select restart.

  Open a session.

  When Keychain dialog box appears, select "create new keychain".

• I tried to reinstall windows xp on my computer and I got a message < root windows > \systems32\hal.dll. I tried to use a disc of windows xp cd and nothing works for me. my pc came with windows pre-installed on it btw. can someone help me fix it

  I tried the suggestion on the error message and nothing works

  Hi Honee,

  Please, try the following.

  You must boot your PC with the XP cd-rom Setup disk, if you have
  one.

  Then, when you get to the screen with the following option appears:

  To repair a Windows XP installation using
  Recovery Console, press R.

  Then press [R] to launch the "Recovery Console".

  When confronted by a prompt asking for the administrator password - just
  Press [ENTER]

  After his start in RC - type the following command:

  Expand x:\i386\hal.dl_ c:\windows\system32\hal.dll

  (where [x] is the letter of your cd drive)

  * NB If SP3 is installed - then the command that you type must be:

  Copy c:\windows\ServicePackFiles\i386\hal.dll c:\windows\system32

  ... instead, because the files are of two different levels of review
  (versions).

  Then restart.

  I hope this helps!
  Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• How to change the size of taskbar buttons? I did everything that I've seen proposed in these pages, and nothing works.

  How to change the size of taskbar buttons?  I did everything that I've seen proposed in these pages, and nothing works.

  The buttons of programs open in the taskbar are tiny and square.  I want them to be of normal size (by default).  I have locked and unlocked the task bar.  I moved the "three vertical lines composed small points."  Nothing works.

  If you want to enlarge all the icons in the taskbar, and then increase the point size of buttons of legend to a larger number of advanced appearance settings.
  Follow these steps:

  1. click on start, Control Panel, personalization, window color and appearance.
  2. on the window color and appearance, click "Classic appearance open for more color options" (link below).
  3. in the box "Appearance settings", click on the button "Advanced".
  4. in the box "Advanced appearance" under "Item:" dropdown, choose "buttons".
  5 set your size
  6. click on the OK button.
  7 on the "Appearance settings" box, click on the button 'Aplly', wait.
  8. click the OK button if you are uncomfortable with the size to change, or just click on the "Advanced" button to set the size.

  I hope I could help

• I double clicked on update of programs and I wonder now run a legacy cpl high. When I click ok it says script errors and nothing works.

  original title: run a legacy cpl high?

  Hi all. on my control panel I double clicked on update of programs and I wonder now run a legacy cpl high. When I click ok it says script errors and nothing works. If I click on details until I click on continue it says; "C:\Windows\System32\RunLegacyCPLElevated.exe" Shell32.dll, Control_RunDLL "C:\Windows\system32\ISUSPM.cpl",Program updates I'm not very technical and well I tried to look on the search engines, I can't find anything to help me.

  Hope someone can advise me please

  Thank you aypee74

  I figured how to stop my warning high. I just got an answer and it reminded me that I now know why my computer was giving this prompt. This may help a bit there. So I decided to write.

  In my case it was my 'Sigmatel Audio Control Panel.
  I had disabled "allow reconfiguration pop ups".
  This will make the warning "Run a legacy CPL high" lights up to chance that your system can access this audio program. Once I've rechecked. The warnings went away unless I open the control panel. But it's a normal warning according to the manufacturer of my computer.
  Some of you may have something much more serious, but for the few who becomes confused by the latter and have this audio driver, this may help.

• Impossible to update LR CC ~ my one day to change and nothing work updated my Mac and all LR will do is CRASH!  Need help.  Tried to stop CC and remove the 1.0 file already and who does not work for me.  What can I do?

  Impossible to update LR CC ~ my one day to change and nothing work updated my Mac and all LR will do is CRASH!  Need help.  Tried to stop CC and remove the 1.0 file already and who does not work for me.  What can I do?

  If lr crashes repeatedly, reset preferences.   http://www.lightroomforums.NET/showthread.php?14226-resetting-%28or-trashing-%29-the-light file-Preferences-room

• Firefox has detected that the server redirects the request for this address in a way that will never end. I followed your instructions and nothing works. This just started happening today.

  I was watching www.ustream.tv/decoraheagles for months. I started using Firefox about a month ago. Earlier today, when I tried connecting to the site, I received the message "Firefox has detected that the server redirects the request for this address in a way that will never end."
  I went on your site and follow the instructions. This Web site was not in the blocked sites. He told me how to add it, and I did.
  She still refuses to open this site.
  Internet Explorer WILL open this site.

  Clear the cache and cookies from sites that cause problems.

  "Clear the Cache":

  • Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Tools > Options > privacy > Cookies: "show the Cookies".
  • http://KB.mozillazine.org/The_page_is_not_redirecting_properly

• How to uninstall Firefox. It apears no uninstall program for Mozillla Firefox on my computer. I tried all the suggested and nothing works.

  I did everything what your website says to uninstall Firefox. Nothing works. Windows message says no uninstall program of Mozilla Firefox on my computer. Do I need special download on your part to uninstall?

  Thank you, whiskeydog

  This issue arose in April. I was able to solve it using Revo Uninstaller.

  Concerning

• AutoComplete does not work on Mozilla, I see the shadow of the box. I've done all the troubleshooting recommendations and nothing works. Upgraded to latest version, Mozilla checked the parameters of confidentiality/history, cache cleared, Java Update.

  AutoComplete worked this weekend, and now it doesn't. I made no changes to my computer right now. For example, I can't fill the bar below to say "it happened...". "cannot see the drop down menus... just a little flicker. problem is on mozilla and every program I opened w / Mozilla.
  Before contacting you I searched the forum, done all the things suggested above and nothing has fixed or even partially improved.

  I also have IE on my computer and it works fine.
  

  my contact: [email protected]

  Do a clean reinstall.
  If there are problems with the implementation at day then best is to download the full version and uninstall the currently installed version and remove the Firefox program folder to remove all remaining files.

  • Download a new copy of Firefox and save the file to the desktop.
  • Firefox 7.0.x: http://www.mozilla.com/en-US/firefox/all.html
  • Uninstall your current version of Firefox.
  • Do not remove the data of a personal nature when you uninstall the current version or you lose your bookmarks and other data in the profile folder.
  • Delete the program folder Firefox before installing newly downloaded copy of the Firefox installer.
  • It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.

  Your bookmarks and other profile data stored in the Firefox profile folder and will not be affected by a relocation, but make sure that you do not select delete data of a personal nature if you uninstall Firefox.

  • http://KB.mozillazine.org/Profile_folder_-_Firefox
  • http://KB.mozillazine.org/Profile_backup

  It is perhaps not necessary to create a new profile, so first try if it works with your current profile, and if not then create a new profile.

  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

• Why is my desk top empty and nothing works for pictures of office except those provided with plan computer?

  Desktop is empty I ran Mcafee security scan it quarentined, and fixed a problem of what was stated, but all the info has been removed from the desktop, pictures, movies, videos and music by virus. Now, I want to have a new image of the desktop, but nothing works... On the other hand, internet works just as it should to exployer

  Hi, Carlos.

  Restart the system and at the sign of the logo of the manufacturer to start typing F8

  Select Mode safe mode with networking

  Download the following tool, then select Full Scan to eliminate malware.  If your system has been infected, antivirus software has been compromised.

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&id=16

  I suggest to turn off System Restore before proceeding with the analysis.

  Turn off System Restore in Windows 7 and Windows Vista

  http://www.howtogeek.com/HOWTO/Windows-Vista/disable-System-Restore-in-Windows-Vista/

  How to turn on and off on system restore in Windows XP

  http://support.Microsoft.com/kb/310405

  When the analysis is complete, restart and open a command prompt window.  Type the following command:

  Chkdsk /r

  Press enter

  You will receive a message about the volume of confinement.  Press y and press ENTER to scan on restart.  Restart your computer.  The analysis will take some time.  You will find the crawl log located in Event Viewer > Windows > application log.  Search for Winninet when the computer restarts.

• Lost the back, front, refresh etc. buttons on the navigation bar. Everything on the fact help page and nothing works

  I have the navigation bar checked, restore the default toolbar, reset firefox, restarted with Add ons disabled, restarted the computer, restart firefox and update my plugins. Firefox is also updated. Nothing works. Thank you for your help and care.

  When you open the toolbar customization panel, the Stop/Reload point at the end of the address bar will be "magically" turn into buttons that can be dragged around. If you put them next to each other, they will be combined into a single button, but if you want them separate, I think you can, but a separation between them.

• Firefox has disabled arbitrarily IDM cc which worked fine for months, how can I reinstall it I won't stop using Firfox if I can't use IDM.

  Firefox has arbitrarily disabled the IDMcc even if I used it several times a day for months with no problems. I want to reinstall IDM and use it. If I can't I will stop using Firefox and come back to IE. I prefer to stay with Firefox, but I won't be using a browser that doesn't let me use IDM which worked very well.

  == I reloaded Firefox I told what IDM has been disabled

  
  

• NETWORK DISCONNECTS RANDOMLY, I READ EVERYTHING HERE AND NOTHING WORKS, PLEASE HELP ME! :(

  Lenovo G510
  Intel core i5 - 4210M
  Windows 7 ultimate
  Broadcom 802.11n network adapter

  For almost a month I had problems with my laptop because it disconnects randomly the system for some reason, I can't identify.
  It can operate correctly for one hour, then disconnects the wireless network card. Every now and then, or every 10 minutes, depends on the day I guess.
  I had a lot of reading the forums on this topic and found nothing to work up to now
  That's what I tried:
  -everything is on maximum performance
  decliques-i 'allow the computer to turn off this device to save power ".
  -disabled some 'ip helper' in services
  -check all that relates to the router (change channels, interference with other routers or wifi), the hardware part SEEMS very well (the laptop is fairly new, it's like a year and never had any problems with it)
  -verification of updates of drivers, it says I have the latest version
  -fully scanned the laptop for viruses and none has been detected
  n ' install any programs lately that could cause this
  -network, signall is excellent

  And still nothing worked. NOTHING. I'm really desperate now. The only thing that makes the network working again almost instantly (like5-10 sec then that if I let him restart itself it takes 2 minutes for even 30-40 minutes), turn and turn again on the wireless network card (I have it by pressing the airplane mode)
  If no help pleaseeee? I noticed that it happens to many other users also.

  If the steps we have provided above has not resolved the problem with intermittent wireless connectivity, then what Canadian technology said, it is likely that the problem lies in the material.

  Intermittent wireless connectivity are often caused by loose or defective air intakes to the wireless card, or a faulty card as well. This is the reason why Canadian Tech informed on the use of an external USB wireless device.

  Another option is to contact the manufacturer of your device, which is Lenovo, for repair options based on security they provide. You can contact them via this link.