Firefox mobile not supported for lg optimus zip

Similar Questions

• Why mobile Firefox is not available for Symbian ^ 3 (anna) or Symbian ^ 4 (beautiful)?

  Why mobile Firefox is not available for Symbian ^ 3 (anna) or Symbian ^ 4 (beautiful)?

  Nokia has moved from Windows Mobile development. New Symbian phones are not in Nokia's long-term plans.

• Firefox is not install on my Optimus S android phone.

  I downloaded Firefox mobile on my phone android spring Optimus S and it will not be installed.

  Sorry, we are not actively working on adding support for the Optimus S and other phones ARMv6. We will expand support for more devices in a future version.

• Your browser is not supported for this program. This program is expected to be launched above IE4 version!

  The provider's Web site will not reflect orders/quotes...
  We get this message
  "Your browser is not supported for this program.
  This program is expected to be launched above IE4 version! »

  URL of affected sites

  http://

  To work around this problem, you can also try using the User Agent Switcher add-on to give the impression that you are using IE on the site.

  You can contact the site owner to inform them of their poor support for Firefox.

  Alternatively, you can report a broken help site.

• WebVPN - error: access method is not supported for the capture of WebVPN

  I'm watching a capture of webvpn on the SAA. I start the capture:

  test type webvpn user capture (entering a valid user name)

  Then I connect to the ASA to try to see track with "Using a browser to capture displayed data" as described in the setup guide.

  https:// / admin/capture/test/OCAP

  After login, I get this message in the browser:

  "Error: access method is not supported for WebVPN capture."

  If I stop the capture (capture test) before you try to connect, the error in the browser is:

  "404 not found".

  The/admin/capture/test/OCAP requested URL was not found on this server. "

  Any ideas greatly appreciated. Thank you!

  After some research, I finally found it

  DOC: Webvpn catches are recorded only in zip format

  
  

  CSCtg79320

  Symptom:

  WebVPN captures are only saved in zip format.

  Conditions:

  According to the following doc:

  http://www.Cisco.com/en/us/docs/security/ASA/asa82/configuration/guide/WebVPN.html#wp1153077

  WebVPN captures can be recovered in the pcap format using the browser, which is incorrect. The document must be corrected.

  Workaround solution:

  N/A

  Thank you for your time and cooperation

  Portu.

  In case you have any other questions please note all useful messages and mark this question as answered

• LabVIEW does not support for NI-DAQmx.

  Hello fellow programmers.

  I am an absolute beginner with LabVIEW and I have the problem that even if I installed the latest versions of the NOR-DAQmx (9.7.5) driver and LabVIEW (2013) I get the error message "LabVIEW does not support for NOR-DAQmx. Please reinstall.

  I created a task in the NOT-MAX. According to the tutorial now there should be an element in LabVIEW under "Measure i/o", but it is not. I carried the task via drag & drop in the block diagram, but when I want to turn in code, I get the above message.

  Operating system: Windows XP SP3

  Any suggestions?

  Thanks in advance

  Laura

  crossrulz,

  Thank you for your response. Well, I installed the latest version of NOR-DAQmx (9.8) and this time I also installed packages for the former executives etc and now it works.

• DMA between host and target FPGA is not supported for this remote system.

  I try to cover with my FPGA (on the cRIO-9002) of the RTO.  I have install upward of anOpen good VI reference without error, but as soon I try to access thefifo I error-63001 and the attached message wrote:

  Error-63001 occurredat reference FPGA VI opened in the target - multi rate - variables - fileIO_old.vi

  Possible reasons:

  NOR-RIO FPGACommunications framework: (Hex 0xFFFF09E7) DMA from the host to the FPGA targetis not supported for this remote system. Another method for controller of e/s or climatiqueLes associated with the FPGA target.

  What other I/O optionsdo I need to move the data asynchronously to the RTO for the FPGA. I have triedcreating memory, but it seems that I can't write to the memory of the RTOSside.

  We have also a 9012sitting around will using this cRIO rather solve this problem.

  I'm very very greenwhen it comes to LabView, so I apologize if this is an easy question.

  As stated in the readme of the driver NOR-RIO, DMA is not taken in charge from the host to the FPGA on the cRIO-900 x series. The cRIO-901 x supports DMA transfers between host and FPGA and FPGA to host all the cRIO-900 x series controllers only support transfers the FPGA host DMA. As a result, LabVIEW returns an error if you try to transfer using DMA controller for cRIO-900 x.

  The 9012 looks like the ideal solution, you are very lucky to have additional hardware laying around

• You try to create VHDX or another format not supported for this version of the server

  Hello

  I have a problem with vWorkSpace do not load VM and I really hope that someone here might be able to add comments. We run vWorkSpace v8.5 on a box of windows server 2012 and v6.1 Hyper-V on Windows Server 2008.

  After running then changing the main image, I've updated the image of our cloud. Once the update of the virtual machine would not load, giving the below error

  End of the action (create) (failed to create. CreateVM: Unable to create the virtual machine of provided information. : CreateVhdxDisk: try to create VHDX or other format not supported for this version of the server. Path to the virtual disk: .avhd - call stacks - to Quest.vWorkspace.VirtualCore.HyperV.HvVmService.CreateVM (VmCreateData createData, String domainNameIP)
  at HypervLocalExecutor.HvCreateVM (string strUser, strPwd, VmCreateData createData, String strDomainNameIP, VmResult String & result)
  to CHyperVClone.doClone (basic_string<>\,std::allocator > * nsHostName, basic_string<>\,std::allocator > * nsUsername, basic_string<>\,std::allocator > * nsPasswd, VmDefData * vmData, basic_string<>\,std::allocator > * strDomainIPaddress, NewVmInfo * newVmInfo)-> Quest.vWorkspace.VirtualCore.HyperV.Server2008R2.CreateVhdxDisk (String parentDiskPath, String diskPath)
  at Quest.vWorkspace.VirtualCore.HyperV.Server2008R2.CreateDiskForVM (vmMgmntObj, String vmPath, VmCreateData ManagementObject & vmData, String & vhdPath)
  at Quest.vWorkspace.VirtualCore.HyperV.Server2008R2.CreateVirtualMachine (VmCreateData vmData, String domainNameIP)
  at Quest.vWorkspace.VirtualCore.HyperV.HvVmService.CreateVM (VmCreateData createData, String domainNameIP))...
  5 March 2015 15:54:15 - 1392:8580511090155201372 - caught error: Stack Trace and stack Exception below:
  at Quest.vWorkspace.VirtualCore.HyperV.Server2008R2.CreateVhdxDisk (String parentDiskPath, String diskPath)
  at Quest.vWorkspace.VirtualCore.HyperV.Server2008R2.CreateDiskForVM (vmMgmntObj, String vmPath, VmCreateData ManagementObject & vmData, String & vhdPath)
  at Quest.vWorkspace.VirtualCore.HyperV.Server2008R2.CreateVirtualMachine (VmCreateData vmData, String domainNameIP)
  at Quest.vWorkspace.VirtualCore.HyperV.HvVmService.CreateVM (VmCreateData createData, String domainNameIP)

  We believe that it is somehow to do with Hyper-V under Windows 2008 and vWorkSpace running on Windows 2012 - the VHDX format is not supported by the version of Hyper-V server. A glance online confirms this. So my question is, how update the master image changed the format VHD vWorkSpace wants to use and is there a way to assign vWorkSpace don't know this format?

  I have widely in search of a solution to this line and not found anything it either, nor there seems a clear way in the vWorkSpace console to change that.

  Thank you

  Hello

  I suspect that you have created a snapshot on your model.  It is not supported, if you delete the snapshot so that the .avhd is merged to the vhd/vhdx and update the model in vWorkspace again.  If this does not work, you will need to delete the model of vWorkspace and then re-import.

  Concerning

  Paul

• Printer drivers HP LaserJet M1005 MFP not supported for Windows 8

  Dear support,

  I use the printer HP LaserJet M1005 MFP range, but the drivers are not supported for Windows 8.

  Pls can update you with the new drivers of windows 8, which his slove my problem.

  Thanks in advance

  Concerning

  Vermorel

  Hi Majusko,

  If the Windows 7 installs on 8 to win, you must wait for the pilot to Win 8 to be released. Basic/Host-based driver available February 2013

  HP LaserJet and Color LaserJet - Windows 8 media

  HP trade-in program

• Note support for 12.1.3

  ALL INSA

  EBS R12.1.3

  RHEL5

  I can't find the matching note support for R12.1.3

  I found only 12.0 and 12.2 as in:

  Installation of Oracle Applications and Notes of version 12 (12.0.4) for Linux (64-bit) upgrade (Doc - ID 416305.1)

  Oracle eBusiness Suite Installation and upgrade of exit 12 (12.2) Notes for Linux x 86-64 (Doc ID 1330701.1()

  
  

  
  

  
  

  Help, please...

  Thank you

  JC

  
  

  Here it is!

  Oracle E-Business Suite installation and upgrade version Notes 12 (12.1.1) for Linux x 86-64 (Doc ID 761566.1)

  Kind regards

  Bashar

• Imported the Parallels VM, now I get "BusLogic SCSI adapter is not supported for 64-bit customers."

  I have a virtual machine 64-bit Fedora 16 that I use in Parallels Desktop.  During my first installation of VMWare Fusion 5, I had the opportunity to import this VM.  I did that, but when I boot, the virtual machine is suspended.  I went to the configuration of the virtual machine in VMWare and fixed a few things than the failed import.  Now I when I start the VM, I get this dialog box:

  The BusLogic SCSI adapter is not supported for 64-bit guests.

  I searched on the web and this forum, and I can't find information on solving this problem.

  I do not necessarily first as suggested by the other answer on this subject and instead, add the following line to the configuration of the Virtual Machine's .vmx file.

  scsi0.virtualDev = "lsilogic"
  

  This should fix the error message that you get without having to directly edit the hard.  Take a look at: changing the file .vmx for your VM from VMware Fusion (1014782)  

  That said, if you want detailed according to the existing real configuration recommendations then... To help understand what components are, how best to provide comprehensive diagnostic information is to use the command "Collect information to Support" the Fusion of VMware (menu bar) > help > collect Support information and then attach the .tgz file it created on your desktop for a response post.

• Error - exception error not supported for user - Help!

  Hi all

  I get an exception error unsupported to the user in a part of my page is refreshed after encountering a validation error.  Validation is managed properly, but when the page is refreshed to display I get an exception error not support for the user for the following code (generates the value of the element on the page):

  < code >

  Select nvl (sum (po_details.po_det_amt), 0)

  of po_details

  where po_details.po_id =: P230_PO_ID

  and po_details.wbs in (select distinct wbs_number_id of wbs, project

  where wbs.vendor_id =: P230_VENDOR

  and substr (wbs.wbs_number_id, 1, 6) = project.wbs_sequence

  and project.project_number = nvl (:F101_FPC_NUMBER,project.project_number));

  < code >

  When the code retrieves a single value, the following post calculation calculation of:

  < code >

  to_char(:P230_PO_AMT_FPC,'FML999G999G999G999G990D00');

  < code >

  Generally, the process works.  It is only when a validation run which prevents the removal of a purchase order that I encounter an error during a refresh of the page.  I get an exception error unsupported to the user for this calculation.  I'm puzzled.

  Any ideas?

  to_char(:P230_PO_AMT_FPC,'FML999G999G999G999G990D00');

  AFAIK - all within the APEX bind variables are of type VARCHAR2

  That means - you are implicitly expressing a string to a different data type just to cast to a string.

  So: this code is completely useless and adds more complication to the mix only what you need.

  It is very possible that Oracle is trying to convert a DATE... (which will fail)

  I put either the FORMAT for the type of element to match what you need or make the conversion from the string in your SELECT statement.

  for example

  Select to_char (nvl (sum (...), 0), "FML999G999G999G999G990D00")

  If you still get a 'user defined error', it is likely to be lifted since within the procedure used to remove the PO.

  See the DEBUGGING within the APEX pages to check exactly where the error is thrown.

  (it sounded like you already did and have reduced in to_char() section)

  MK

• Creation of Raw Device Mapping (RDM) is not supported for local storage (1017530)

  "Often, localstorage devices do not support VPD page 0x83 and can therefore be used for Raw Device Mappings (RDMS)." The content of the page 0x83 is used as a unique identifier for the device. For more information, see creating Raw Device Mapping (RDM) is not supported for local storage (1017530). »

  Does anyone know if this is even the case for modern storage?

  We are a dell shop, wishing to take advantage of the ability to create up to 64 TB RDM.

  However, the storage of the host in question will be local SAS only.

  Prefer not to have to merge muliple 2 TB VMDK into windows to make a record of 4.5 to.

  Then projected on the presentation 1 x 4.5 CT rdm

  If you plan to use a SAS controller, you should be able to do this. Your drive will be identified as a device of the naa, and you will be able to add as an RDM to VM - only with ESXi 5 (which can support more than 2 TB LUN).

• VixDiskLib_Cleanup always returns vixError (6) - the operation is not supported for the specified parameters

  Any ideas how we can determine what parameters it dislikes?  I am the appellant after VixDiskLib_Disconnect as recomment docs and using the same connection params struct I used with VixDiskLib_ConnectEx.

  Thank you

  -Ron

  UInt32 numCleanedUp = 0, numRemaining = 0;

  /= VDDK 1.1 header says connection spec should be null =/.

  connectParamsP - & gt; vmxSpec = (char *) NULL;

  vixError = VixDiskLib_Cleanup (connectParamsP, & numCleanedUp, & numRemaining);

  vixError (6) - the operation is not supported for the specified parameters

  Ron,

  I think that your connection is probably not use all transport advanced, in which case _Cleanup does nothing. If you connect without using advanced transport, cleaning returns 6 - there is nothing to clean up.

  Thank you

  Annick

• Because Flash CS6 is not supported for OS x 10.8, can cloud members have Flash CS5?

  Because Flash CS6 is not supported for OS x 10.8, can cloud members have Flash CS5?

  I see Flash CS6 is not supported (http://helpx.adobe.com/flash/kb/mountain-lion-support-flash-professional.html ). My colleagues and I are not able to see some fonts and the colorpickers do not function correctly, as indicated in the URL.

  Can you make the previous version of Flash available for download and use with the accession of cloud just for this issue of OS X 10.8.

  It would be harder for us to return to an older operating system, and then to get just a very old version of Flash on our system.

  Thanks in advance,

  -Line

  Adobe Flash Professional CS5, CS6 and 5.5 are not compatible with Mac OS x (v10.8) Mountain Lion.