Firefox starts in offline mode work and does not connect to internet

Similar Questions

• updated from XP to Windows 7 and does not connect to internet

  I'm upgrading to a computer running XP on a Windows 7 computer.  I have all the wires and cables connected and in the correct places, but now with Windows 7 computer, I get a message that I am not connected to the internet.

  I unplugged the computer Windows 7, rehooked the XP computer and everything works fine and connects to the internet.

  I wonder... I must have an ethernet cable to most recent update with Windows 7 computer newer than what I used to the old XP computer?

  Thank you!

  Most often when a device does not work, it is because the driver is damaged. Re-install a new copy should help

  Remove the driver current completely and install the latest driver available.  For instructions on how to do read everything to update the drivers of my partner JMH3143 http://answers.microsoft.com/en-us/windows/wiki/windows_other-hardware/updating-a-driver/a5e6345e-af9b-4099-bef0-8d22254aa1c1?tm=1436753520149 here

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

• H8 - 1360t - page load HP Pavilion constantly and does not connect to internet

  Sorry if I'm on the wrong card, but this doesn't seem to be a connectivity issue because my laptop is fine. I recently bought your desktop HP Pavilion h8 - 1360t. I am running Windows 7. I've disabled the login screen, the Canon camera software installed and uninstalled Norton and went with the Earthlink virus protection. I can't imagine other changes I've done because I can barely get online anywhere. The problem is that I can't get straight after the restart of the computer. If I'm lucky, I can get on a single website for a minute or two, but then the window no longer charge. The loading icon turn right and towers and eventually I get a message asking me if I want to wait for or terminate the program. I went to Internet Explorer for Google Chrome and thought it was a little better at first, but it still occurs. I hope that I don't have a bad computer. Can someone give me some ideas on how to solve this problem? Thank you.

  I just thought about something else. I still have my old Dell desktop hung right next to the HP because I did not move my files again. The router & modem are plugged into the Dell. I don't know if this could slow down the HP computer.

  Thank you for responding. I was unable to get safe mode to come up by pressing the F8 key, but the computer seems to work better now. I was talking to Earthlink a different issue and they suggested that I try Earthlink PC Fine Tune. I was suspicious at first, but it seems to be very useful.

• Once I changed my ISP my computer network does not work and does not recognize my router lynsys

  Once I changed my ISP my computer network does not work and does not recognize my router lynsys

  Hi George,.
  Please go to the Microsoft Community Forums.
   
  1. do you get an error message?
  2. do you have the internet connection wired or wireless?
  3. What is the brand and model of the computer?
   
  I suggest to refer to the links and follow the steps in the articles:
   
  Wireless and wired network problems
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help?T1=Tab03#network-problems=Windows-XP&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1
   
  Resources for the resolution of the problems of modem in Windows XP
  http://support.Microsoft.com/kb/308022#top
   
  How to troubleshoot wireless network connections in Windows XP Service Pack 2
  http://support.Microsoft.com/kb/870702
   
  How to reset the Protocol Internet (TCP/IP)
  http://support.Microsoft.com/kb/299357#appliesTo
   
  If the problem persists, contact the Internet service provider for assistance.
   
  I hope this helps.

• New updates of Windows since 06/11/12 is originally Vista does not connect to Internet Explorer

  I have a desktop with Vista CAREB.  It has always worked well until about June 11, 2012.  Now it does not connect to Internet Explorer. It says it is connected to the internet and that has been verified by our server.  Tried everything and eventually restored it and no problem.  Then the next day, same thing and restored.  Next day same thing so I disabled all updates and no problem.  What new update windows made in the last few days which is the cause and what can I do?

  Thank you

  Hi Judy,.

  We cannot verify that Windows Update is causing the problem, I suggest to install the Windows updates one by one and make sure that Windows Update is causing the problem.

  Windows Update

• I am able to connect to internet but when I switch to the amother user account it does not connect to internet

  on my computer, I am able to connect to internet but when I switch to the amother user account it does not connect to internet

  Hello

  1. Is there an error code or the message that if displayed when it is unable to connect to the Internet?
  2. You use a wired connection or wireless?
  3. You use the administrator account or standard account?
  4. All changes made to the computer before the show?
  Method 1:
  Check out the link and follow the steps.
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows
  Method 2:
  Visit the link and try the troubleshooting provided steps.
  Why can't I connect to the Internet?
  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

• iPhone 5s does not connect to internet unless its connected to wifi

  I have a 5 s IPhone it does not connect to internet unless I'm at home connected to wifi. I can not send imessages or browse the web what should I do?

  You did that mobile data is turned on in the settings/phone/cell data?

  Also, make sure that the apps you want to use for the cell data are enabled in the list below these settings.

• printer do not wake off mode 'sleep' and does not turn off when the Start button / stop pressed or pushed.

  HP printer all-in-one B210a win 7 64 bit.

  no error message just don't wake up from power saving mode and does not turn off when the power button is pressed. must be disconnected and then turned back on. works fine until the power saving mode he did go to sleep then not answer the test print command or Toolbox controls.  power saving mode is turned off, but still goes to sleep.

  First, you will need to make sure that the printer is under warranty.  You can do it here.  So, if you are in warranty, you must contact HP at 1-800-474-6836 and the United States in computer science, international users click here.

• iPhone 7 more - Siri iOS10 not work and does not

  I received my iPhone 7 Plus 3 days ago and tried to set up "Hey Siri". In the process, I noticed that Siri was insensitive and does not work.

  I did some troubleshooting and started with the reset, restore, turned dictation & Siri/off voltage (before and after reboot) and still no response from Siri.

  I proceeded to remove the hardware problem by making a call and speaking directly into the microphone with high and low height during a call. Nobody who assists heard both high and low perfectly. I only tested the microphone with voice memo and the microphone worked fine.

  Called customer service on speaker (which call was working properly) but they were unable to provide a response, rep said she would follow with me Wednesday.

  I press the home button, Siri will appear with the wavelength and as soon as I said a word Siri States "I didn't understand" and rest wavelength normal. I don't know if there is a problem with my phone or iOS10, but if someone has an answer or has the same issue please chime. Thank you!

  iOS 10, when using Siri, you hold DOWN the home button while talking with Siri.  Release the button when you are finished speaking.

  Best,

  GDG

• iPhone and iPad does not connect to internet

  Hello

  Since yesterday, I was unable to connect to internet via wifi on my iPad and iPhone.  They show the power of the full signal and says I'm connected, but won't load Web pages or refresh applications.  When I disable wifi on my phone everything works fine on the LTE, but I don't want to use my data.

  I think it must be something with the update iOS because:

  -J' completely rebooted our router and modem and it worked on my iPad for about 30 seconds (what makes a Web page) before it stopped working again.

  -My boyfriend did not the last update on the iPad or iPhone, and both connect on our wifi at home, while my iPad or iPhone will connect to the internet.

  -My iPhone also does not connect to the wifi in my work, even though I know it works as I am online on my computer work via wifi.

  I noticed something strange on my iPhone and iPad when I went to check the settings wifi yesterday - the VPN configuration is flashing/refreshing without touching me, even if I don't have everything set up VPN connections.  When I actually click on VPN, an error is displayed.  There may be something wrong with the VPN on the new update which blocks the wifi signal?

  
  

  I really appreciate your help!
  

  If you are able to connect your iPad and iPhone to your wireless router agreement but the iPad and iPhone will not connect to internet, it is unlikely to have anything to do with the version of iOS.

  Try this:

  Restart your router (unplug unit, wait ten seconds and then reconnect it).

  Wait for the router shows all lights normal and connected.

  Now, reboot your iPad or iPhone

• Subcircuit pines are not aligned with grid and does not connect

  I have two symbols the same sub-channel.  One is fine, but the other has pins which are not line up with the grid of MS and who does not yet connect.  MS12.0.0.

  This one is very good:

  

  The pins are off-grid.  The circle will not connect.

  

  Hello

  I did experiment a little with this. One thing you can try is to open the symbol Editor, select the axis that does not connect and then the spreadsheet view, change the shape of pine of length zero. Then try and see if you can connect to the PIN in the design. It will not appear as a line, but you should still be able to connect to it.

  If this does not work, you can open a service request and we can try to see how to solve the problem.

  I hope this helps.

• explore my internet does not work, please tell me how to solve this problem, it does not connect to internet

  explore my internet does not work, please tell me how to solve this problem, it does not connect to the internet while I have internet and other things could be used

  Hello

  Can you tell us more? What is the model of the unit? Do you have the same problem when using other browsers?

  Maybe you should just clear the cache or delete cookies? Try this link here.

  I hope that helps!

• Z30 Z30 blackBerry does not load unless it is rebooted and does not connect to the link

  My Z30 will load only if it is connected to an AC charger and the Z30 is restarted. My Z30 does not connect to my PC via USB. My Z30 running OS 10.3.2.2639. I did a soft reset (how I learned that it charges a restart), and recently completed a wipe of the device security. I bought the phone on October 5, 2014, and now is not working today. My dealer I come to, their store policy is only good for 30 days after purchase and referred me to go look at the manufacturer's warranty. The manufacturer's warranty is for 1 year. I just went this year a few weeks ago. Doubly upset right now!

  Hmmm... except maybe Pinterest, it is difficult to infer any specific causal event of this sequence; I hope that you have already tried to remove this app to see if things have improved. But before more destructive measures, please run the BBVE on the device to see if it provides any useful information:

  • http://support.BlackBerry.com/kb/articleDetail?articleNumber=000035973&language=English

  Also, that you take a LINK backup in order to recover? For example, if you know your configuration selections, the home screen configuration, add apps, claim, etc., then you can skip the backup and reconfigure simply from scratch. But note that it also requires that use you the best practice method for Contacts and calendar, in that your device does not have the data source 'master' for those, but rather some services online (e.g., Google, Outlook.com, etc.) is the master, and so when you reconfigure these data will simply restore servers, no LINK restore to get the data on your device.

  Let us know.

• After that put 36.0.1 to date, does not connect to internet

  After update, don't be loading not pages. Does not connect to Comcast. Computer restarted from scratch, reset modem and router - nothing works. I tried Safe Mode early, did not work. Internet Explorer works fine. Mail works fine.

  There is no error message when the update has been loaded.

  It is a terrible 'update '! How can I fix it?

  IQ140 said

  After update, don't be loading not pages. Does not connect to Comcast. Computer restarted from scratch, reset modem and router - nothing works. I tried Safe Mode early, did not work. Internet Explorer works fine. Mail works fine.

  There is no error message when the update has been loaded.

  It is a terrible 'update '! How can I fix it?

  Update: I indeed found firewall was the issue (the first time with updates of Firefox). I tried uninstalling and reinstalling, but that no longer works.
  Then I opened the application window of Norton Security (looking for information of firewall). I don't actually change or click on what to Norton. I decided to try to install again. This time, when I hit "Run" instead of "Save", the small window Norton popped up saying downloading is safe. Then he installed and opens very well.

  It may be a quirk of Norton? Or by choosing run rather than save (and running after registration)?

• Windows live mail does not connect to internet

  Windows live mail does not connect to the internet, keeps telling me that I'm working in offline mode, and then does not connect when there is a link.

  Try to check the setting of Internet Explorer offline.  It just open IE, press alt to display the menu bar, then click on file and make sure that 'Work offline' at the bottom is not checked.

  Also just good habit, make sure that you are on the latest version of the application by downloading the package at http://get.live.com.