FireSIGHT recommendation setting

Similar Questions

• Why Windows Firewall always stops when I turn on the computer - even if she did before? How can I keep it on recommended setting when I shut down the computer?

  I always change the tuning parameters recommended on Windows Firewall, when I turn on the computer, otherwise it reads in red writing "Windows Firewall does not protect your computer." The network location is the Public network.

  Hello
  If you are having problems turning on Windows Firewall, follow the instructions on this page: http://support.microsoft.com/mats/windows_firewall_diagnostic/
  Here are the instructions for error messages: error 0 x 80070424 or error of 0x8007042c
  I hope this helps you.
  Brian

• I want to restore the resolution recommended setting.

  I changed the resolution to a larger type.  When I followed the help instructions, to change the resolution to the recommended settings, the screen is as I can't reach the button apply.  By dragging the screen still does not me enough room to reach the button.

  There is also me unable to print, since I can't click the button print.

  You can press the ENTER key to apply.

  You can also use the TAB key to navigate to it > and then press ENTER.

  See you soon.

  Mick Murphy - Microsoft partner

• FOW to stop the resolution changing its recommended setting

  resolution on my computer he changes with the night when the PC is turned off and even in the mddle of a program, how to stop it please

  Hello

  1. What version of Windows are you using?
  2. What is the brand and model of the computer?
  3. Have you made changes on the computer before this problem?

  I suggest you to try the following method and check the status of the issue.

  Hardware devices do not work or are not detected in Windows.

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  If the problem persists, I suggest you to send us more information to help you better.

• Spellcheck language set by DEFAULT

  Running 13.04 Ubuntu, firefox can only highlight each word red whenever I type in a text box, because the superior to RIGHTCLICK entry > > LANGUAGES is "French". The other read, in order, "French (Belgium)', 'English (United Kingdom)', 'French (Luxembourg)', 'English (United States)', 'French (Switzerland)", "French (France)", "English (South Africa)," "French (Canada)", "Persian", "Persian (Iran)", "English (Australia). Now, I do not deny that I can went on a fine madness long after discovering the spelling check of the new languages. Whatever it is, I want to be rid of all but "English (United States)", "Persian (Iran)" and "French (France)", in that order, with "English (United States)" as a default.

  Unfortunately, the first ("French") option is the default value, which means that each textbox I go, no matter what I chose in the previous text box, the language of the spell checker is reset to French. There is no firefox addons that suggests a change of language, other than maybe Ubuntu Firefox changes, integration Ubuntu unity Desktop Integration online, accounts or Web sites of the unit as I understand would change the language of the spell checker by default, these plugins or languages. Subject: Watch spellchecker.dictionary like en_US config set by user and EDIT > > PREFERENCES > > CONTENT > > present LANGUAGES, "in order of preference", in the us, FR, fa and ar; Although I don't think that the latter is related to my problem, since Web pages in the correct language; It's just the spell check.

  Hello helasraizam, it should be possible to delete some installed spellchecker Ceres of topic: addons under "dictionaries".

  I do not know how to influence the order of the remaining entries however & would have recommended setting spellchecker.dictionary manually. If this did not help, but you can also erase the part "site preferences" in your history, since the preferred spell checker language can be stored on a site-by-site basis: remove the navigation, search and download history on Firefox

• HP 15-r043tu notes (J6M13PA #UUF): book 15 Hp Wireless notes, blue tooth and Chip set driver for windows

  I bought HP 15-r043tu notebook with Free back.

  I reinstalled windows 7 (on Installer Clean)

  I try to install the driver software wireless and others that link to Hp support for windows 7

  http://support.HP.com/us-en/drivers/selfservice/HP-15-R000-notebook-PC-series/6875200/model/7280264#...

  But the driver do not work for the WiFi, blutooth, chipset and storage

  Error is that "the program is installed correctly" and the "Re-install the program with the recommended setting.

  Product model number is: J6M13PA #UUF

  Suite driver are working fine since the same link:

  -Audio

  -Graphics card

  -LAN (NIC)

  Please help me on this, otherwise I think I bought a machine to qrong.

  Thank you

  Hello:

  You can probably use the driver chipset Intel directly.  The second file on the list, it's self installation of the file.

  https://downloadcenter.intel.com/download/20775/Intel-Chipset-Device-Software-INF-Update-Utility-

  Chipset driver will install the storage controller driver too.

  I don't know why you'd want software RST and the driver, but if you do, you can also try the last being from Intel.

  3rd on the list file will install the drivers and software.

  https://Downloadcenter.Intel.com/download/25165/Intel-rapid-storage-technology-Intel-RST-RAID-driver

  Wireless:

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_131223_1

  Bluetooth:

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_130390_1

• My new monitor recommends 1600 x 600 settings. My Control Panel will not offer this option. How can I access it? Thank you.

  NEW widescreen HP Monitor settings recommended 1600 x 600 at 60 Hz.
  In Control Panel, appearance, display I can't access that recommend setting. What should I try?

  That sounds like a strange resolution for a wide screen, is there a typing error?  Maybe you mean 1600 x 900?

  Most likely you will need a new video card that has suppprt for resolution.  You can check to see if there are newer drivers for your card which might include the resolution but in all honesty I've never seen a map to change the capabilities of resolution by a simple change of pilots, but..., that I don't know or what I have not seen would be a pretty big book so try new drivers and if that does not work then go shopping for a new video card.

  John

• Friendly Mobille test fails because the Muse sets phone width in pixels

  Google recommends setting put phone in width as "width = device-width" rather than in pixels

  Is it possible to do it in Muse or do I need to go into the HTML and change the settings manually

  Not a problem to do this, but a nuisance and the Muse can replace when I update the page for another reason

  Thank you

  Kirby

  Please see the answer here Mobile friendly test fails because the Muse sets the width in pixels phone>.

• Mobile friendly test fails because the Muse sets phone width in pixels

  Google recommends setting put phone in width as "width = device-width" rather than in pixels

  Is it possible to do it in Muse or do I need to go into the HTML and change the settings manually

  Not a problem to do this, but a nuisance and the Muse can replace when I update the page for another reason

  Thank you

  Kirby

  What you describe is not necessary to have a friendly test Google's Mobile.

  Assuming that there is a Desktop version and phone page in Muse, Muse output has not changed and no invalid code or in conflict has been added to the display of the page object > insert the HTML, the Page Propertiesarticle or via the third party widget, the page is Mobile friendly according to Google.

  If you have a page that did everything that precedes and is detected as not mobile friendly by Google, thanks for posting the URL of the page.

• Database Microsoft SQL Server recommended recovery mode

  I've seen a few articles about MS SQL Server recovery models and the effect it has on the file log and its growth, but not where I see which is the recommended setting should be creating the database for installation.

  Is there a recommended recovery model setting?

  Is it necessary to try to recover the last full backup of database transactions?

  Thanks in advance.

  David.

  use the Simple Mode

  a couple of other things to keep on hand

  http://www.VMware.com/resources/TechResources/1025

  http://KB.VMware.com/kb/1003980

  http://KB.VMware.com/kb/1025914

• I can't send email from a remote location, why?

  Home Thunderbird works fine. When I go to my sons or daughters of the House I can get emails but can't send them. I get an error message the connection times out. I can send and receive e-mails on my iPad using the standard MAC e-mail program. They use the same provider of Internet and configured so far I can say that they are the same. When I travel I use one of the two laptops. Using Windows 7 the other Linux Mint. Two of these computers use Thunderbird and the problem is the same on both machines. I looked in the FAQ etc. on the Mozilla site but can't find anything that seems to be applicable.

  Thank you.

  I don't know why jscher2000 wondered about the POP or IMAP.

  Sending via SMTP and the problem here is that you must be able to connect to the SMTP server of twc of connections of others. Some ISPS actively block connections to other SMTP servers of the service. So, for the reasoning, we could guess that cox do not have connections to the SMTP server of twc.

  Otherwise, the SMTP server of twc may refuse messages are sent via a connection from cox. However, if the twc SMTP server requires a password on your part, it is likely that your problem; the password means that it is ready to allow messages sent by you over any viable connection.

  I would check that you use 587/STARTTLS with a password - but since it is the recommended setting I'd be surprised if you were using anything else.

  You could try googlemail, hotmail /outlook.com, gmx etc. as an alternative email service providers with which you are unlikely to have these problems.

• Airport utility cannot find Airport extreme

  Using vs 6.3.6 on my Mac Pro. Whenever I run the utility it is something different, but there is always at least one of my extremes that will not be detected. Usually, none are detected the first time I run the utility. If I'm lucky I can restart the utility time 3 or 4 and is ultimately connected to the extreme, I need to access. Sometimes I have to reboot the extreme to access even if it displays a green light. This problem also occurs with the current version of the iOS of the utility and when you try to configure the extreme of OS X Server. Server loses its connection to the extreme router and keep telling me that I used the wrong password.

  Found some old validation recommended setting up IPv6 on my Mac Pro local linc, appears not to have any effect. Someone at - it other solutions?

  Found some old validation recommended setting up IPv6 on my Mac Pro local linc, appears not to have any effect.

  Most users will have more luck if IPv6 on airports parameters are defined for Local link only... unless your ISP provided you with IPv6 specific parameters to use for their service and you have verified that your devices are actually IPv6 addresses.

  Affecting airports Local link may be worth a try if you have not already done this. No guarantee, that the "disappearing airport" bug has been around since version 6.x of AirPort Utility was introduced more than 3 years ago.  Strangely, it seems to be creeping to the right these days.

  

• DVD burning

  I have a video that I imported into iMovie from my Samsung camcorder. I edited video clips and ask them now ready to burn to DVD. iMovie has recorded the movie in MP4 format. I tried to send the movie to iDVD, but will not accept this format. I even tried to burn directly to DVD player, but it will not accept this format. How can I do to get this movie on a DVD so I can watch it on a DVD player. Do I need other software and if so is there a free. I'll buy one if necessary.

  Hi, clay,

  iDVD will accept mp4.   Share your movie on your desktop.  Then, open iDVD and set up a project with a theme.   Then click on the symbol in the lower left corner of your iDVD project window.   Click Add movie in the menu dropdown.   A link will appear on your screen.  Drag your movie in the link and it will go right to your iDVD project.  The best way forward, from here is to save the project as a disc image on the file menu.  It will take a while for all the rendering end.  You will end up with a file .img on your desktop.   You can read the disc video image using the DVD on your Mac drive.   If it is satisfactory, Ctrl-click on the image file and select burn to disc.    4 x speed is the recommended setting.   Use a serious DVD - r.   And you're good to go.

  See you soon,.

  -Rich

• Problems of helmet speakers on dualboot Satellite Pro C50-A-1KV

  Hi all.

  I have a serious problem with Toshiba Satellite Pro C50-A-1KV. I have win7 x 64 and Ubuntu 14.04 x 64 on this machine. It was first installed Win7 and later Ubuntu 14.04.

  I tried to use the headset while I was logged on ubuntu and there is no sound, the sound was cut out of the speakers but headphones did not work, when I plugged it out I still have the sound on the speakers.

  After reboot I had no sound at all on ubuntu, and when I go to windows, the problem worsen for windows also. Right now it seems like some time the sound is on the speakers, but headset is dead, some time ago his headphones and speakers.

  I have no idea what is the cause of the problem. The win7 and ubuntu have been kept clean, only the updates have been downloaded. I think that the driver has some problems, but how could I make it work. To test, I tried to use Skype and there was a situation where I have the sound on the speakers and headphones, but then the microphone was death-_-'.

  I have a few pieces of it and the exact problem is on half of them. I have 2 deliveries.
  The first onewas ok, everything works. Either everyone has this problem :/

  I tried to make a backup on model where it is working and windows backup restore and install new ubuntu but it did not work.

  Any suggestions what may cause the problem or how to fix?

  I think you should first clarify whether your headset is OK.

  My theory is that your helmet could be faulty (maybe a broken cable or something like that) and that's why speakers and headphones will not work when the headset is plugged into the laptop.

  Laptop computer's headphones Jack supports a small switch that allows you to disable the speakers while the headphones are connected.

  If in case the headset is faulty, the speakers and the headphones would not work.
  So I think you should check the helmet first.

  If you are sure that the earphones are OK, then I think there could be a problem with the little switch in the headphone jack.
  Why? Because I can't imagine that this could be a software / driver problem because the same question is displayed using Linux as well as Windows System.

  The two systems are completely different and that a software / driver problem in both cases, it's almost unbelievable.

  However, I still recommend setting the laptop configuration using the procedure of recovery Toshiba in order to check if the noise problem using Toshiba preistalled system configuration and factory

• How do I restore my Windows Live Hotmail to its previous good performance?

  SATELLITE P200 - 1FC
  All of a sudden I can't respond to incoming emails or send attachments on my Windows Live Hotmail account. It works perfectly on my PC but not on this laptop. I have something stuck by mistake? He will receive the incoming emails, and I can send emails again but can not continue a thread?

  Hello

  In my opinion, is not a Toshiba laptop issue
  In your case, I recommend setting up your Hotmail account verification

  Maybe you have to change something, I recommend that you check the Hotmail user support page.