Firewall ERROR Ox80070424 TRIED ALL NG HHHELLLLP?

Similar Questions

• Problem installing Error 1719 tried all fixes please read.

  Hello

  I have tried all four methods to resolve this issue, however, in the record of service, I don't have the installer and in the registry, I did not msiserver so I can't change WOW64. So, how can I fix the problem? I spent days trying to solve this problem. I read all posts on this topic but no one addressed the missing file listed above. Do I have to re - install win 7 64 bit?

  Hello Robert,.

  Thanks for posting your query on Microsoft Community forum.

  I would be grateful if you can provide us with the following information to help us better understand the issue.

  1. Four methods you have tried to solve the problem?
  2. Have you ran SFC scan? If Yes, what was the result of the analysis?

  As you mentioned in your message that the installation service is missing and was not as msiserver, then I suggest you follow the methods provided in the following article.

  ""The Windows Installer could access the Service"error when you try to install a program in Windows 7 or Windows Vista.

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  You can use the following link to back up and restore the registry in Windows: http://support.microsoft.com/kb/322756/

  If you have not run SFC scan then give us the result of the scan and if not then please follow the steps below to run the scan.

  Scan SFC will be scans all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  How to use the tool Checker (SFC) system files to fix system files missing or corrupted on Windows Vista or Windows 7

  1. Go to Start, click all programs and open the Accessories.
  2. Right-click on command prompt in the list programs, and then select run as administrator. If you are prompted for an administrator password or for confirmation, type your password, or click OK.
  3. In the command prompt, type the following command and press ENTER:

  sfc/scannow

  Once the scan is finished, close the command prompt window, restart the computer and check.

  For more information, refer to this link:

  http://support.Microsoft.com/kb/929833/en-us

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Thank you.

• Activation of check error (I tried all advise them without result, really desperate)

  So I got a new computer, running windows 8. Installed the software adobe digital editions. Active computers. Everything seems fine.

  Went to download an eBook from my public library, get error error check' Activation '.»

  OK, so I'll remove activation under the Help menu. Type in my information and make the message "failed to clear approval. Please try after some time. »

  I so wait a while and try again. Still does not work.

  OK, so I go to the adobe communities and find people who have a similar problem. I followed ALL the instructions, including going into the registry and remove the key from the. Nothing works.

  I have installed and uninstalled 10 or several times, remove all the visible files my system, removed the registry key, etc.. Still does not work.

  I am so frustrated with this!  Is there anything else I can do short wipe my computer clean and trying everywhere?

  Basically, your computer is still allowed.

  First you must get rid of authorization.

  1. exit ADE.

  2. go to the registry entry:

  

  3. delete the entry "Activation". [This will withdraw authorization of ADE]

  4. start ADE

  5. now allow ADE by using new-> allow the computer

  I hope this works!

• I get an error: Ox80070424 when I try to change my firewall settings... I don't know how to solve this problem... help please.

  Im trying to let allow sharing of zune media allowed on windows firewall... However, when I click on it says: error: Ox80070424 cannot change settings... so I have no idea on where to start to fix this type of problem help please.

  Hello

  Did you change your computer?

  Method 1:

  I suggest you run the fixit tool and check.

  Diagnose and automatically fix problems of Windows Firewall service

  http://support.Microsoft.com/mats/windows_firewall_diagnostic/

  Method 2

  I also suggest you to follow the link and check.

  Error code: 0x8007042c 'firewall Windows cannot change some of your settings' when you try to activate your Windows Firewall

  http://support.Microsoft.com/kb/2530126

  Method 3:

  I also suggest you perform the clean boot and check.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  See also:

  Understanding Windows Firewall settings

  http://Windows.Microsoft.com/en-us/Windows7/Understanding-Windows-Firewall-settings

• I tried all these steps and still no progress, cannot update or restore my phone. When you try to restore an error appears saying 'cannot find the phone (9).

  I tried all these steps and still no progress, cannot update or restore my phone. When you try to restore an error appears saying 'cannot find the phone (9).

  We do not know what are the following steps, because you have not provided their. Support this article has suggestions for your specific error code.

  If you see errors 9, 4005, 4013, 4014, when you restore your device iOS - Apple Support or

• Error 0 x 80070002 - tried all suggestions still cannot update

  Computer update-watch the 0Xz8007002 error - tried all of the suggestions - does not always update

  Hello

  1. the Microsoft updates are getting failed?
  2 have. what proposals you tried?

  Method 1
  I suggest you try the steps from the following link:

  You receive an error '0 x 80070002' or '0 x 80070003' code after you download an update from Windows Update, Microsoft Update or Windows Server Update Services
  http://support.Microsoft.com/kb/910336
  
  Method 2
  I suggest you to run the fixit from the following link:

  The problem with Microsoft Windows Update is not working
  http://support.Microsoft.com/mats/windows_update/

  Method 3
  I would say you can do clean boot and install the updates.

  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353
  
  Note: make sure you reset the computer back to normal once the diagnosis is complete.

• 0x0000007E (0xc0000005, 0XF7B068F0, 0XF7B067F4, 0XF7B064F0__This is the error code I get on the blue screen that I can't get out I tried all means to start upward and this labtop is not but 45 days)

  0x0000007E (0xc0000005, 0XF7B068F0, 0XF7B067F4, 0XF7B064F0
  I tried all that I need help. I tried to fix what I did just as much as to reinstall and the first time that I start it, it displays this error message. I have an acer with an intel atom clocked at 1.6 Ghz prossesor and a memory of 1 GB and 80 GB HD with the H2O bios so that you can help me please.

  You probably have the hardware failure. It is a brand new computer. Return it immediately for replacement. MS - MVP - Elephant Boy computers - don't panic!

• I can't update, get the same msg error 800b0100 and we tried all the suggestions I can do?

  I tried all the suggestions, but I was not able to solve the problem.

  Hello Deborah 755,.

  Thanks for posting that question you in the Microsoft Community. According to the description of the problem, you are not able to install the updates. Provide the following information:

  ·         Did you do changes on the computer before the show?

  ·         (Numbers KB) updates you install?

  ·         The issue is limited to a particular update?

  ·         You use a third-party security software?

  ·         Have what troubleshooting measures you tried?

  Follow these methods.

  Method 1: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Place the computer in a clean bootState to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow step 3 of section to start the computer to a Normal startupmode.

  Method 3: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.

  http://www.Microsoft.com/downloads/en/default.aspx

  Method 4: Follow the steps in the article.

  Error 0x800B0100 when you try to install updates for Windows or Microsoft Updates

  You can read this article for more information:

  How to reset the Windows Update components?

  I hope this helps. Let us know if you need more assistance.

  Thank you.

• Repeatedly, getting errors when trying to install the windows updates... tried all Microsoft fixed, no results, error 80070643 and 8024AFFF

  Installation and update of Windows Vista are no longer works... I tried all Microsoft fixed... nothing helps... continue to get errors and no installation, please help...

  Thank you

  Hello

  Do the following and check:

  Step 1:

  Try to do a Scan of the SFC (System File Checker). The scan will look bad system files and will attempt to fix them, if possible.

  (a) click the Start button.
  (b) type: cmd.exe in the search results.
  (c) right click the cmd.exe file and select 'run as administrator '.
  (d) in the CMD window, type: sfc/scannow and press the Enter key.
  (e) restart and see if that solves the problem.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Step 2:

  If the problem persists, you can also scan your computer the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Let us know if it helps.

• I tried all the steps for the error 646, but nothing works.

  Original title: samanthaddzt

  I tried all the steps for the error 646, but nothing works.

  What can I do?

  Have you tried this one from Microsoft Support?

  You receive the error code: 0 x 80070646, error code: 646 or error code: 1606 when using Windows Update or Microsoft Update

  http://support.Microsoft.com/kb/2258121

• When you try to download sp3 for office 2007 I get 22% done then it freezes and comes up with the error 8007ee2. I tried all of the fixes recommended without result, ideas?

  When you try to download sp3 for office 2007 I get 22% done then it freezes and comes up with the error 8007ee2. I tried all of the fixes recommended without result, ideas? I am running Vista and office 2007. I tried all the Windows solutions but nothing works

  Hello Stephen,

  You happen to have another system that you can try to download the fixit on and then moving on a USB? You can also try this fixit as well: http://support.microsoft.com/kb/971058

• media player does not open. Itried the benchmark tool, it did not help. I tried the scanning from the prompt, it says that some files were corrupted and could not repair them. There is no error message at all

  Itried the benchmark tool, it did not help. I tried the scanning from the prompt, it says that some files were corrupted and could not repair them. There is no error message at all

  Maybe the info will offer something that you haven't tried:

  First, launch... Task Manager...

  How to launch the Task Manager instantly in Windows XP or Vista?
  http://www.XP-Vista.com/tipstricks/how-to-launch-the-Task-Manager-instantly-in-Windows-XP-or-Vista

  The Task Manager / processes tab select (highlight) any which instance of:
  "wmplayer.exe" and left click on the button "complete the process".

  If you see a dialog box 'Warning'... left click Yes.

  Close the Task Manager.

  Try Windows Media Player again.

  And... the following links may be worth a visit:

  (925704) when I try to use Windows Media Player 11, the program
  does not start, or some user interface elements are empty
  http://support.Microsoft.com/kb/925704

  Please see the following article for info on opening a high command
  Prompt in Vista

  Windows Vista - command prompt: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/command-prompt-frequently-asked-questions
  (scroll down to: how to run a command with elevated privileges?)

  Good luck...

• System Restore error: tried all solutions in the posted forums. Halp?

  Halp me please :(

  Norton anti-virus Malwarebytes and Kaspersky TDSSKiller found some unpleasant things on my computer last night, and after having tried to delete/quarantine unpleasant things and reboot, Vista is now impossible to load beyond the screen "Please Wait..."/Welcome. I let it sit for about 5 minutes solid, then the screen blurs and I'm stuck.

  I can boot into Safe Mode with network (as well as all other security mode), so I tried to do a system restore, but nothing helped. I have been searching forums literally ALL THAT DAY and we tried ALL the tips and solutions of publication.

  "ERROR: System Restore failed due to an unspecified error." The setting is incorrect (0 x 80070057). »

  1 Norton is off and I'm in Mode safe

  2. I have run the sfc/scannow command and told me "Windows Resource Protection found corrupt files but was unable to solve some of them."

  3. I have run the command chkdsk and told me "errors found. Chkdsk cannot continue in read-only mode"and"Chkdsk cannot run because the volume is in use by another process.

  4. I tried selecting the option "Repair my computer" in the start menu advanced, but when I go to sign in, it says my username or password is incorrect. Impossible! Impossible to overtake this dialog box, I have to restart the computer using safe mode.

  5. I tried to boot from the last good known as well and it takes me still on the screen "Please Wait..."/Welcome of death...

  An additional note: when you use Google in Mode safe mode, I tried to visit a legitimate forum link and was redirected to a spam site. When I tried to hit the back button, it's as if he wouldn't let me leave, constantly asking me if "I knew? This seems to be a kind of virus-y thing. I thought that Safe Mode was safe? My virus problems would be bad enough that even the Safe Mode is infected? Sad :(

  I'd really appreciate some feedback. The other just posted solutions do not work for me.

  Thank you very much!

  A virus that has infected operating system files or program files can be active in safe mode.

  Here are a few things to try:

  1. Because your computer has Norton Antivirus, you should disable Norton product Tamper Protection before you run the system restore.  This is not the same thing to disable Norton Antivirus.
  2. Demarrer start from a Windows Vista installation disc, select repair your computer and run System Restore from the System Recovery Options menu.

  Boulder computer Maven
  Most Microsoft Valuable Professional

• IMSLib.DLL error persists... Have you tried all the suggestions from the forum

  I keep getting the error "installation problem: IMSLib not found.» Services of Acrobat will not work. »

  This is a new purchase, download and installation of Acrobat Pro DC on a desktop PC Windows 7 x 64. I get no error during installation. I don't have Photoshop or other applications of CC. I tried all the suggestions in the previous thread on this issue (installation problem: IMSLIB not found.)  Services of Acrobat will not work.). I tried approaches include (full restart of Windows between any stage remove/install):

  (1) uninstalled old already installed versions of Acrobat 9 Pro and Acrobat Reader. A ran the CC Adobe cleaner in older versions (CS) and new (DC).

  (2) uninstalled all other Adobe software on the computer (for example: Flash)

  (2) remove all Adobe directories under common files and user AppData

  (3) reinstalled CC and Acrobat Pro DC from scratch (I have now done the uninstall/reinstall 3 times)

  (4) reinstalled Adobe Application Manager

  (5) Ran 'Repair Installation' inside DC Acrobat Pro

  (6) has the regsvr32 - you and i - to rejigger the registry options. It reported an error the file of the DLL.

  (7) IMSLib.DLL manually copied from Adobe installation to System32 and Windows SysWOW64 directories directories (I tried all 3 of the different versions in the underlying directories... "They have different file sizes).

  Nothing changes the symptom. Opening DC Pro or CD player gives the dll error and none of the expanded services.

  Please notify. I need to get this working soon or request a refund, and install a competing product. Files PDF is an essential part of my work.

  This closing with resolution. I changed my default directory install to C:/Program Files (x 86) and reinstalled. Everything worked correctly, no more error IMSLib.

  This should be worked by the team of system development at a given time. You can't assume an installation directory with no ability to customize or change the location. Many people use small OS disk partitions and need to install apps in other directories or drives.

• Using a Mac OSX updated 10.9.5, to update to the latest update of Lightroom, now get error - Lightroom met permission issues. Click on fix - cannot fix. You click on read more and I tried all the solutions. Always error. Uninstalled and reinstalled - alwa

  Using a Mac OSX updated 10.9.5, to update to the latest update of Lightroom, now get error - Lightroom met permission issues. Click on fix - cannot fix. You click on read more and I tried all the solutions. Always error. Uninstalled and reinstalled - always error.  Cannot set up a new admin on Gov't computer user. Help

  Please make sure that you gave permission for the folders listed in the article, follow these steps.

  1 - give read and write permissions for the Application Support folder and preferably on User Library and the secret library.

  2 - Add user and admin both permissions.

  When you open the Get Info option for specific folder.

  Make sure you click on '+' symbol, it will open the list of user accounts. Add currently logged in user account and Director of user account, if it is not added.

  Both must have read and write to prevent access these some questions in the future.

  Important:

  Once you added as currently logged on user account and administrator user accounts and provided access for reading and writing.

  Make sure you click on the gear icon and select apply to closed.

  Lock dialog box and close the Get Info .

  So that all the folders in the folder Adobe will get read and write access.

  

  Let us know if this helps

  ~ Assani