Firewall problem

When I run a Microsoft Fix It and use Windows Firewall troubleshooting tool I have a message, I run a Firewall Norton Internet Protection hot product. I don't have Norton on my computer. How remove Norton Internet firewall hot product and make windows firewall product intalled?

If you want to remove the norton product you then run NORTON REMOVAL TOOL-here

Go to the link above and click on softpedia secure download (US).
Download it and run it.

Tags: Windows

Similar Questions

  • Impossible to get online - reading HTTP/HTTPS/FTP Firewall problem

    I cannot get online and diagnosis to assess the problem.

    The error I get indicates that it is a firewall problem; However, when I disabled my firewall and tried to connect, it still wouldn't let me.  I ran the diagnostic and received an error message that passport.com certificate is expired.  It is said that the system could not connect over HTTP/HTTPS and FTP (passive) was able to connect.  Help, please.  Thank you!

    Sorry try this first...

    You can change the behavior of the Internet Connection Firewall by turning on various ICMP options, such as allow an incoming echo request, allow incoming timestamp request, allow incoming router requestand Allow redirect. Brief description of these options appear on the ICMP tab

    If your network uses Internet connection sharing to provide Internet access to multiple computers, it is recommended to activate the shared Internet connection on the Internet Connection Firewall. However, you can activate the shared Internet connection and Firewall Internet connection separately. It's a good idea to enable the ICF on the Internet connection on any Microsoft Windows XP computer that is connected directly to the Internet.

    Internet Connection Firewall can also help protect a single computer connected to the Internet. If you have a single computer connected to the Internet with a cable modem, a DSL modem, or a dial-up modem, Internet Connection Firewall protects your Internet connection. Do not cut the ICF for virtual private network (VPN) connections because Internet Connection Firewall interferes with file sharing and other VPN functions.

    ??????????????????????????????????????????????????????????????????????????????????????????????   OR

    http://support.Microsoft.com/kb/936211/en-us read up on that let me know if this helped.

    Internal modem

    To restart an internal modem, you must restart the computer. If you still experience network connectivity problems after you restart the computer, go to step 2. If you connect to the Internet using a router, there may be a problem with the configuration settings, and they must be updated. To determine if a network connectivity problem is caused by a bad configuration or a problem with the router, you can bypass the router and connect your computer directly to the modem.

    Warning Connect your computer directly to the Internet may be left vulnerable to attacks. To protect the computer against attacks, make sure that a firewall is installed and that the firewall is enabled on your computer. To learn more about the Windows Firewall that is included in Windows Vista, see the "Windows Firewall" section.

    Windows Firewall

    Windows Vista includes a firewall, called Windows Firewall. By default, the Windows Firewall is enabled. However, you should always check that the Windows Firewall is turned on before you connect the computer to the Internet. To verify that Windows Firewall is turned on, follow these steps:

    1. Click Startand then click Control Panel.
    2. In the search box in the upper right corner of Control Panel, type security.
    3. In the search results that appear, click the icon or the link to the Security Center. In the window that appears, you will see four bars that are titled firewall, automatic updating, malware protection, and other security settings.
    4. Click the arrow to the right in the firewall bar to expand the bar. The extended bar will display one of the following three options:
      1. If the firewall bar is green, it means that the firewall is enabled.
      2. If the firewall bar is red, you may see a message that the Windows Firewall is disabled. To turn on the Windows Firewall and cause the firewall bar to the center of safety to turn green, click activate now.
      3. If the firewall bar is red, and the message describes a problem with a third-party firewall program, we recommend that you disconnect the computer from the network and then contact the vendor of the firewall program for more information on how to activate the third-party firewall program.
  • Firewall problem: "due to an unidentified problem windows cannot display windows firewall settings.

    I can't turn on my or even access my firewall settings. When I try I get the following message, "Due to an unidentified problem windows cannot display windows firewall settings" help?

    Hello
    Follow these instructions to fix the Windows Firewall:
    Download and install repair Windows: 
    When the repair of Windows opens, click on the tab to start repairs, click Start. Unselect all the boxes except for the following:
    -Reset the registry permissions
    -Reset the permissions of files
    -WMI repair
    -Repair Windows Firewall
    Then click Start. Once it is finished, restart your computer. Let me know if this helps you.
    Brian
  • I can not play spades on msn it repeat issue with server with firewall problem

    I can not play spades on msn

    I can not play spades on msn he repeats the question severor problem with the firewall. Open portsand check firewall settings, but I don't know how to do this or what to look for so can you please help me thank you.

    Hello

    I recommend you contact MSN support for assistance on this issue.

    https://support.MSN.com/default.aspx?&St=1&wfxredirect=1

  • LogMeIn Hamachi and RDP Windows XP Firewall problem

    I use Logmein Hamachi VPN over the internet to a PC running Windows XP.
     
    I am able to use RDP to access, but only if I turn off the Windows Firewall.
     
    I tried to access Hacmachi in the exceptions, but I'm still doing work if I turn on the firewall.
     
    I can use RDP over the Local network with the firewall, but not on the Hamachi network.
     
    I would like to be able to find a way to configure the Windows Firewall to be on and enable RDP by Logmein Hamachi VPN access.

    Hi Mr cheese,

    Since he works locally the problem may be with the VPN program I would suggest that you contact logmein support using the link below.

    https://secure.LogMeIn.com/contactus/

  • Windows Firewall problem

    The Windows Firewall is disabled and I need to activate whenever I turn on my PC?

    Hello

    ·        Since when are you facing this problem?

    ·        Remember to make changes to the system?

    ·        Do you have any third-party firewall installed on the system?

    I suggest you return the item mentioned below.

    Using the Windows Firewall

    http://www.Microsoft.com/windowsxp/using/networking/security/winfirewall.mspx

    How can I turn on or turn off the firewall in Windows XP Service Pack 2 or later versions?

    http://support.Microsoft.com/kb/283673

    It may also be that, Security Center is the load before Windows Firewall load completely.

    If you continue to see the alert, however, there are good chances are you see the effects of an infection. See if you can download/run the malicious software removal tool manually:

    http://www.Microsoft.com/security/malwareremove/default.aspx

    ·        You have security software installed on the system?

    If this isn't the case, I suggest you to install Microsoft security essentials on the system and then scan your system for any virus or malware. It is easy to install and use. Click on the link below.

    http://www.Microsoft.com/securepc

    Thanks and regards.

    Thahaseena M
    Microsoft Answers Support Engineer.
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Windows XP Pro Windows Firewall problem

    Helllo eveyone:

    I'm new to this forum; I have a complex problem.

    I had a HP Compq 7600 Windows XP pre, I am trying to disable the Windows Firewall. the problem is this pc I bought used it was previosly on an environment made up the name. the firewall is control of group policies and I'm not able to turn it off. How can I activate it turned off, I have found the command to access group policy, but I can't find the option to control of the firewall. Help, please.

    See - step 2: specify the parameters of Windows Firewall for your Group Policy objects

    This is the reason why the native firewall is always on
    " Windows Firewall: protect all network connections used to specify that all network connections have Windows Firewall is turned on.

    Then check 'Disable the use of Windows Firewall across your network' at the bottom of the page above.

    If we use a 3rd party firewall then it is safe to disable the native XP firewall.
    If no 3rd party firewall is present and then suggest that you let the native on XP firewall.

    MowGreen Services update - consumer safety

  • Windows Vista firewall problems. Error 1068: The dependency service or group

    When I try to Active my windows firewall I get
    the following message appears:

    "Windows Firewall settings cannot be displayed because the associated.
    service is not running. You want to start the windows firewall service? »

    The yes/no option.

    If I clicked 'Yes', another message appears saying:

    "Windows cannot run the Windows Firewall service.

    Okay, so I'm trying to start this service. I looked at the service
    status and stopped her, so I guess it must be started, if I click on
    beginning. However, the message:

    «Cannot start service on local computer windows firewall.» Error 1068: The dependency service or group
    Could not start.

    What else can I do to access the windows firewall?

    Hi elcri

    My apologies to zero you answer you earlier since May 3.

    I have to assume that the problem is still there?

    Allows to check and see if the ICS Service is running or not (we want to disable it if it is enabled/running)

    Click Start
    In the box, type start search in services of
    List programs, right-click on service , and then click run as administrator
    Scroll down the list of Services until you come to (ICS) ICS

    Is it enabled or disabled?  If on, double-click top and change startup to off and stop the service.
    Reset

    I would like to know if this solves the problem or not - thanks Ken
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Redirect Google, random radio and firewall problem

    I think I have a redirect virus. I am constantly redirected to spam websites when you use google chrome and firefox. My internet explore has stopped working also. There were also different radio stations or something plays in the background, even if no program was running and it was certainly not from the sites I visited.

    Also, I can't my firewall to work. His problem due to some not identified.

    I have malwarebytes, spybot search and destroy as well as great antispware. While they sometimes detect problems when those who are removed the problems have not disappeared.

    Hello
    Try the sequence of steps 1 and 2 in this virus/malware removal guide: http://www.selectrealsecurity.com/malware-removal-guide
    It contains instructions which will remove the malware more. If you have any questions, just ask me. I hope this helps you.
    Brian
  • the router firewall problem

    Hello

    could you please be so kind to help me with a problem I have with the firewall of the router (Linksys WRT110) Linksys Wireless.

    Run the firewall test, I get this message:

    Your system REPLIED to our requests for Ping (ICMP Echo), make it visible on the Internet. Personal firewall plus can be configured to block, delete and ignore these ping requests to better conceal systems against hackers. Is strongly recommended as 'Ping' is among the oldest and most common methods used to locate previous systems to further exploitation.

    Thank you very much.

    Fred

    Thanks for the info.  I run the test on the Gibson Research site with a scan named ShieldsUp.  But if you say that it gives false results, I am happy, I don't want someone hack into my system, my son we homeschooled tru internet and this school would be a big problem if someone with bad intentions hack here and do who knows what.

    Thanks again.

    Fred

  • Windows Firewall problem - unable to start service. [FIXED]

    THIS PROBLEM HAS BEEN FIXED! Thank you! SEE MY LAST POST FOR MORE DETAILS.

    I am running Windows 7 Professional 64 bit. I use Malwarebytes' Anti-Malware for a while and we had no problems with the software.

    I tried to start the Windows Firewall service for the last couple days. After some research (with no response), I tried several steps.

    Evertime I try to turn on the Windows Firewall through Control Panel, I get this error:

    "Windows Firewall cannot change some of your settings.

    0x8007042c error code. »

    First, I checked the Services. This is what I found.

    -Windows Firewall (automatic)

    -Engine of Filtring basis (Auto)
    -Windows Firewall authorization driver (missing)

    Then I tried sfc/scannow in a prompt (run as administrator). This was the result.

    "Start system analysis.  This process will take time.

    Start of the phase of verification of the scanning system.
    Full check of 100%.

    Windows resource protection found no violation of integrity. »

    Then, I went in the management of the computer and found that Windows Firewall authorization driver has a yellow top brand scream icon. Right click and clicking on properties gave this:

    Under the general tab:

    Device type: drivers Non Plug-and-Play

    Manufacturer: unknown

    Loactaion: unknown

    Status of the device: this device is not present, is not working properly or is not all its drivers installed. (Code 24)

    Driver tab:

    Service name: mpsdrv

    Full name: Firewall Windows Driver authorization

    Current situation: Decree (cannot be started)

    Type: request

    Driver details:

    Driver files:

    C:\Windows\system32\drivers\mpsdrv.sys

    Provider of: microsoft Corporation

    File version: 6.1.7600.16358 (win7_rtm.090713 - 1255)

    This error appears whenever I try to start the Windows Firewall authorization diver:

    "The system has encountered the following error trying to start the service.

    Cannot create a file when that file already exists. »

    Then I tried these commands in the same command prompt, with the results listed after each command:

    netsh advfirewall reset

    Unable to load the programme of assistance following DLL: WSHELPER. DLL.

    An error occurred while trying to contact the Windows Firewall service. Make sure that the service is running, then try your request again.

    net start mpsdrv

    183 system error has occurred.

    Cannot create a file when that file already exists.

    net start bfe

    The requested service has already been started.

    More help is available by typing NET HELPMSG 2182.

    net start mpssvc

    Error 1068 the system has occurred.

    The dependency service or group was able to start.

    regsvr32 firewallapi.dll

    DllRegisterServer in successful firewallapi.dll.

    I also tried "regsvr32 wshelper.dll" and got the following error message:

    The "wshelper.dll" failed to load module.

    Make sure the binary is stored at the specified location or

    the debug to check for problems with the binary or

    dependent. DLL files.

    The specified procedure could not be found.

    I have found wshelper.dll in C:\Windows\System32 (20KO) and folders C:\Windows\SysWOW64 (15KO), as mpsdrv.sys in the folder C:\Windows\System32\drivers (75.5 KB).

    It is all the information that I recall gathering at this time.

    If a similar problem like this has been asked and answered, please point me in the right direction.

    -Thank you.

    Thank you all, but I got it working again. It seems to be related to the Google redirect virus. I downloaded ComboFix and it got rid of the problem.

    Thank you guys for your answers.

  • Another "Tough" Pix 501 firewall problem

    Hello

    the other day, I posted a message of support to allow access to the servers from outside. I had recreated the real client installation in a laboratory test - including a simulated bridge - and everything worked perfectly well.

    Now that I tried to install the firewall on the site, I have a BIG problem - no client inside can connect to what anyone on the Internet.

    Here's the relevant part of the config:

    interface ethernet0 car

    interface ethernet1 100full

    access list outside permit tcp any host xxx.115.216.50 eq 3389

    access list outside permit tcp any host xxx.115.216.50 eq 25

    IP address outside xxx.115.216.50 255.255.255.0

    IP address inside 192.168.1.1 255.255.255.0

    Global 1 xxx.115.216.49 (outside)

    NAT (inside) 1 192.168.1.0 255.255.255.0 0 0

    static (inside, outside) tcp 3389 192.168.1.155 interface 3389 netmask 255.255.255.0 0 0

    public static tcp (indoor, outdoor) interface 25 192.168.1.199 25 netmask 255.255.255.0 0 0

    Access-group outside-outside interface

    Route outside 0.0.0.0 0.0.0.0 xxx.115.216.125 1

    dhcpd address 192.168.1.100 - 192.168.1.150 inside

    xxx.185.225.10 dns 192.168.1.199 dhcpd

    dhcpd wins 192.168.1.199

    dhcpd lease 921600

    dhcpd ping_timeout 750

    dhcpd field xxx.local

    dhcpd allow inside

    I ping the PIX inside interface from inside clients... and I can ping anything on the Internet from in the PIX firewall.

    In addition, the servers inside are accessed from the outside (tested to make sure).

    The problem is obviously - no inside clients can access the Internet.

    When I show xlate, I see that translations are actually happening, but there is no connectivity.

    According to the TAC knowledge base article, this configuration should work... by default for connections between the inside and outside are not blocked in any way, unless there is an access list configured. I also tried to disable the access list associated with the external interface. In the last step, I tried to use an IP address in another range for the address part (xxx.185.225.151 and I have addedd a route to the gateway proper with a metric of 2). I guess that nothing has worked...

    Suggestions very apprechiated!

    Cisco routers default arp cache time is 4 hours. I'm not sure of other possible suppliers. Try to install the avec.51 premise to check the operation, if it works, try the adresse.50 again. If you do not have a problem with mail not being is not accessible for about 4 hours maybe let it run long enough to test the theory of the arp...

  • window firewall problem f

    my windows computer dell laptop 8 always ask on the firewall of the window, turn off saying that use setting advised each time that I connect to internet and often gets himself. so please help me to solve this problem.

    Hello

    Thanks for sharing your concern about the firewall of Windows 8. We are happy to help you.

    Just to check, activating the recommended settings for Windows Firewall does not work, and the firewall blocks after doing. Is this correct?

    If the above is true, feel free to read this answer of Mouneshwar R on another step to start the Windows Firewall Service. The link to this useful thread can be found here.

    Let us know how it goes.

  • Synchronization due to a firewall problem

    Hello

    I have a problem with the synchronization of files on Mac caused by the firewall (little snitch) with the message: 'Impossible to sync'.

    Le CeativeCloud.app is fully unlocked (incoming and outgoing access are allowed) in the firewall , but the synchronization remains

    blocked until I do completely disable the firewall. So it seems that there is another process it's blocked but I do not have indication of the present process of and no firewall message on this subject.

    I don't want to turn off the firewall.
    Can you help me me et tell me le process et ports to unlock?

    Also posted here.

    Hi pgrat,

    You must also allow 'Core Sync' via the firewall.

  • Firewall problem possible intrusion via CFMAIL

    I'm new to coldfusion - please speak slowly. I have CF mx 7 std on Windows 2003 with IIS 6 - and excahange std STD 2003 all on the same box. I am trying to send e-mails using intrusion via cfmail, and I am sure that the code is correct - the query is also very good (checked with cfdump). But here's the problem - the email goes to several addresses, some internal (using the name of the full address) and some external i.e. [email protected]. My internal users receive the external email are not. I have a device astaro firewall. Any suggestions welcome - how trouble shoot if it is the CF Exchange or my firewall.

    Thanks for the help.

    I thought about it - and shameful never asked. Incase someone else is there, but has the same amount of brain, I did... Here's what I did (I hate to find the question I'm looking for just to see a message saying "too bad", I would like to post the same answer to my own stupid questions)

    Once I saw the msg of error in CFmX - it did not take long for fix - took me more time to put in place an external account to test. On your box Exchange - Exchange System manager - expand your virtual server (points to a cold fusion) - develop protocols (this may be different depending on whether you have an administrative view running)-expand properties click on SMTP - then right click on the SMTP virtual server by default.

    In the Access tab - click on relay - add IP to authorized computers. Note: allow all computers to relay authenicate... check - if this box is checked or not - you must always have the IP address, even if coldfusion is the same square - successfully added to computers permit.

    At least it fixed it for me.

  • Windows Server 2008 firewall problem

    in Windows Server 2008 how can I disable the firewall without disrupting the network users or lose internet connectivity. Should I ask users to disconnect from the network before installing new programs such as SQL 2008R2 or Office 2010?

    If there is a more appropriate forum for Server 2008

    Hey Rugby,

    The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.
     
    In the Windows Server forum:

     
    Please report if you need help Windows. We're here to help

Maybe you are looking for

  • Create, save data backup

    Hello This is probably a fairly common question, but I looked around and either did not answer or did not understand them. I honestly don't know who. So, without further ADO, here is my question. My iPhone becomes quite comprehensive, so I was thinki

  • Y at - it a shortcut to the address bar?

    Not likeCTRL + K for the search bar then SHIFT + Tab.orF6 then tab (and in some cases another tab) If there are shortcuts in the address bar, then why isn't it listed here: https://support.Mozilla.com/en-us/KB/keyboard%20shortcuts?as=AAQ If there is

  • DIAdem 11 Setup error: object required: navigator, display.currdataProvider

    On the Diadem 11.0 installation, I get a popup error message when I open the program first (and subsequent) time and the browser, view tab is corrupt: Object required: ' navigator, display.currdataProvider. Also when the program is first opened after

  • Highway 2010 0xc004d301 Setup error

    Have had to reinstall Highway 2010 and towards the end of the installation, I get this error, 0xc004d301.I tried to uninstall via Add/Remove Programs, and then put it back.I get the same error during installation and when I try to run the program. I

  • How can I backup files, and then restore from that backup AFTER reformatting?

    in the past, I tried to restore files from a backup, I did just before reformatting. but when I tried to restore the files, the last backup information obviously wasn't there, so I could not restore the backup on my external hard drive files. I don't