Firewall Server 10.5 does not

Similar Questions

• VB 6 EXE compiled on the server (MS Server 2003) files does not work after restarting Windows 7.

  I work in the field environment.
  Some VB 6 EXE compiled on the server (MS Server 2003) files does not work after restarting Windows 7 PC (shortcut to the server).
  but it runs on the Windows XP computer.
  For example:-Inventory.exe (work), Sales.exe (does not work)
  Help, please.

  Hello

  I suggest you to ask your question at the following link.

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/

  I would also ask you to contact your IT Department for further explanations.

• A Dell PowerEdge 2850 server is used for the new ESXi server, but it does not support the 64-bit VM.

  A Dell PowerEdge 2850 server is used for the new ESXi server, but it does not support the 64-bit VM.

  I can't believe it.

  When I start up a virtual computer, it gives a wrong message shown in the picture below.

  Does anyone have any ideas on this?

  Usually not enabled virtualization technology in host BIOS.

  Take a look at can not power on a 64-bit Windows VM

• File server for Windows does not work after security update

  I just upgraded the security update that was released last week and all of a sudden the computers windows cannot access the server. I'm under 10.11.6 and everything was great until we started windows computers today. They can ping and access the internet, but they cannot access SMB on the server.

  Macs have no connection problems in the SMB and AFP.

  Any ideas, what has changed? Users of server are all still there and it seems like it should work. I can access the web page of servers too.

  Make sure you are including the domain in the user name when signing in. for example USER: groupe_travail

  Also, check that your windows machine has the correct set of LM compatibility level. For El Cap servers must be set to 3.

  Follow the instructions below to change the Windows security settings to allow Windows SMB connections.

  1. Click on the Start button and in the bottom search bar, type regedit . Select search results regedit and the registry opens.
  2. Using the folders on the left side of the screen, navigate through the tree to the following location: \HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa
  3. In the right window, find the following DWORD value: LmCompatibilityLevel . If it exists, double-click it and set the value to 3 (in decimal).  If it does not exist, right-click in an empty space in the right part of the window and create a new DWORD value called LmCompatibilityLevel and set its value to 3 (in decimal).
  4. Restart the computer.
  5. Re-try to connect to the server via the workstation.

  NOTE: The versions Home of windows may not the ability to set the LM, and unfortunately I have not found a way around that.

• Windows Server Update service does not work after the installation of KB2720211

  I have a Server 2008 SP1 32-bit Standard, which had the role of Server Update for the Windows software installed connected to a WSUS upstream server and everything worked, with 17 clients connected to him and get everything their approved patches.  It was a new server starting with WSUS added at this time 1 months ago.  He had to be upgraded to SP2 S2008 which I did and WSUS have continued to function.  After being on SP2, there was another 152 patches to be applied and after that WSUS does not work anymore.  It appears 1 patch that has been applied has been KB2720211 that seems to cause problems for a number of people.

  The problem is that the update service does not start.  An error message comes back that the service has not responded in a timely fashion and I can't find the log files anywhere on what it is.  Here is what has been done so far all that in the same issue:

  1 deleted WSUS and restarted and installed it again.

  2 Remove WSUS and Windows Internal Database, restarted and installed it again (using the download of KB972466).

  2.1 install SQL Management Studio and logged to an internal database SUSDB and checked it is not set to single user (I believe it is set for multiuser name but I'm going from memory)

  3. install the KB2720211.

  4. installation KB2734608

  5 remove WSUS and Windows Internal Database, restarted and installed it again (using the download of KB972466).

  I am looking for any information on how to solve what is the question, because there is nothing in the log files I can find and no event in the windows event viewer.  I am ready to start with the server however if there is something I can look at to possibly solve the problem, please let me know.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Firewall is corrupt? Does not connect to the internet. Get the message "the firewall settings window cannot be displayed because the associated service is not running".

  Original title: wall of fire is corrupt? Does not connect to internet

  The "firewall settings window cannot be displayed because the associated service is not running" message, but then it won't access the internet or run the program. We have done all the steps listed here http://windowsxp.mvps.org/sharedaccess.htm, but nothing worked so far. Even re-installed SP3. Help, please! Thank you very much.

  Hello

  What happens if you disable the firewall?

  Run the checker (sfc) system files on the computer.

  SFC tool scans system files and replaces incorrect versions of system files by using the correct versions.

  To run the System File Checker tool, follow these steps:

  a. open an administrator command prompt. To do this, click Start, click principally made programs, Accessories, right-click Guest, and then click run as administrator.

  If you are prompted for an administrator password or for confirmation, type the password or provide confirmation.

  c. at the command prompt, type the following line and press ENTER:

  sfc/scannow

  Reference: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/system_file_checker.mspx?mfr=true

  The following article might be useful:
  After you run Microsoft Windows AntiSpyware (Beta), you have problems with the network, or you receive an error message
  http://support.Microsoft.com/kb/892350

• Firewall of Windows Vista does not

  When I click on Control Panel, then privacy, then on firewall, he said: "the Windows Firewall service does not work." I clicked on windows firewall turning power, but it was already enabled. He also says with a sign of caution, "firewall Windows does not use recommended settings to help protect your computer." So, I clicked on update now, which was next to him, typed parameters the administrator password, but nothing happens after that. Help?

  Virus cleaning

  If you have problems to do this in normal mode. Try to do it in Safe Mode with network.

  Click Start - all programs - Accessories - run and type

   

  msconfig
  

   

  Then go to the Startup tab and click on Start and also check network. Reset. Come back here and uncheck the box secure start to return to normal mode.

  Security scanner

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-AU/default.aspx

   
  Malicious software removal tool
   
  If you can not download or use the Safety Scanner, Windows has a little built in antivirus program. It targets only the most common threats. We wanted to update, don't let it. Run it without updating. Then run it again update this time.
   
  Click Start - All Programs - Accessories - (or press the Windows key + R). Type
   

  MRT

   
  Reset the firewall

   

  You can reset your firewall to the default settings.

   

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

   

  netsh advfirewall reset export "%userprofile%\desktop\Firewall Settings.wfw".

   

  Security FixIt

  FixIt troubleshoot Microsoft programs. There are 27 of them.

  Automatically repair Windows security settings to secure your PC

  http://support.Microsoft.com/mats/Malware_Prevention/en-us

  and

  Resolve security issues to protect and secure Windows automatically

  http://support.Microsoft.com/mats/windows_security_diagnostic/en-us

  and

  Troubleshoot Internet Explorer to IE quick, safe and stable

  http://support.Microsoft.com/mats/ie_performance_and_safety/en-us

  For the visit of the list the most comprehensive

  http://support.Microsoft.com/FixIt/en-us

  When you choose to download, choose the option to run on another computer. You can then save it to a folder on your hard drive. Open the folder, open the folder fix this laptop and run Run Fix It. It will contain all 27 FixIt.

  Time full Antivirus

   

  For a permanent anti virus, we here in the forums view a total absence of problems for people using Microsoft Security Essentials.

  http://www.Microsoft.com/en-AU/Download/details.aspx?ID=5201
  
  If all else fails
   
  This Microsoft program starts another operating system base to clean Windows. You need a USB port or a DVD and then boot from it.
   
  http://Windows.Microsoft.com/en-us/Windows/what-is-Windows-Defender-offline
   
  Look for details on the threat
   
  Microsoft maintains an encyclopedia of information about viruses.
   
  http://www.Microsoft.com/security/portal/threat/threats.aspx

• Error code 0 x 80070424 with the Defender, Windows Firewall in Windows 7, does not not for me solutions

  I got the error code for my firewall, I read all of the solutions posted to what I could find, but there is still something wrong. First, I did the analysis of malware and viruses. He found the rootkit malware and removed, but no viruses were found. I tried to manually start the firewall but it does not exist in the services menu. The problem is that none of the Microsoft downloads for automatically fix or other downloads posted to help download for me. As soon as I click on "run" he said that it contained a virus and was eliminated. I did a scan for virus twice.  Any suggestions?

  The description you have provided sounds like your computer is infected with the 'new' Sirefef variant which poses problems for MSE and Windows Defender.

  See Rocks of XP and RickCP suggestions in this thread: http://answers.microsoft.com/en-us/windows/forum/windows_xp-security/i-was-infected-by-a-trojan-while-running-security/8076867b-5682-4b60-9e22-183a84101340

  And the response of bhringer in this thread is quite comprehensive as well: http://answers.microsoft.com/en-us/protect/forum/mse-protect_start/had-something-called-system-care-antivirus/f99e19b0-ddcf-4cbb-85e4-b20f8206a723?msgId=25df3a0d-c4da-4f61-b2de-e0b3fa2e6112

• WAMP Server installs but does not work on Windows 7 Professional. Why?

  To prepare my computer for Web construction and necessary for installing Wamp Server.  Installed, it does not run.  the office bar icon don't change from pink to green.

  Since your message clearly has nothing to do with your comments on the web site of Microsoft Answers, I left it the Feedback forum on the forum of "Programs" of Windows 7.

  If you have problems with wamp, you do not ask the wamp forums would be more productive?  http://Forum.wampserver.com/list.php?2

• 12 c on the repository server management agent does not start due to a failure of the system

  My environment architecture for 12 c Cloud Control (used for the purpose of personal practice) can be explained as follows:

  @DBSERVER: (OEL6.5, x 86-64)

  -12 c Enterprise Manager Cloud Control (EMCC)

  -Database 11.2.0.4 which acts as a repository for 12 c EMCC

  Monitored host is on a virtual machine (VM12) which is currently in the DBSERVER:

  VM12: (OEL6.5, x 86-64)

  -12 c Management Agent which monitors host and database (12.1.0.1)

  The server worked fine for months until recently when the computer has restarted abruptly. Abrupt restart has occurred several times in the past, but this time, he had a problem when restarting. The DBSERVER when a startup starts the SGC and the AGENT. WHO starts perfectly, but the AGENT does not start. On trying to start the agent, it displays the following error message:

  [orcl11204g@dbserver bin] $. / emctl start agent

  Oracle Enterprise Manager Cloud control 12 c Release 3

  Copyright (c) 1996, 2013 Oracle Corporation.  All rights reserved.

  Starting Agent... failed.

  Manager of target failed to startup: targets.xml was rejected: loaded with a token incorrect agent

  See emctl.log and emagent.nohup in: / home/u01/oemrel3/agent/agent_inst/sysman/log

  [orcl11204g@dbserver bin] $

  The targets.xml file contains the following information, which do not seem to be of any help:

  [orcl11204g@dbserver emd] $ cat targets.xml

  <? XML version = "1.0"? >

  <>targets

  < / objectives >

  [orcl11204g@dbserver emd] $

  Anyone can provide assistance in such circumstances?

  The DBSERVER repository database, the auditor and the who are running, while the agent is down. VM12, listener and agent database is running. Is there another file that should be checked for more information?

  --> $/ AGENT_INST/bin/emctl stop agent

  If the agent does not stop is free then kill all the background process agent first grepping for agent perl and java process only

  --> Move your existing target.xml file

  MV target.xml target.xml.old

  --> Create an empty file targets.xml under/AGENT_INST/sysman/MDTs with the below content

  --> Start the agent of

  $AGENT_INST/bin/emctl start agent

  That starts agent but without all the targets in targets.xml

  To the discovery of targets saw agent console resynchronization

  Concerning

  Krishnan

• "No connection to the server of VR: does not not." after upgrade to vSphere 5.5

  As part of the upgrade to vSphere 5.1 to 5.5 along http://kb.vmware.com/kb/2057795 I've updated vSphere replication to 5.5.0.0 build 1309877. All rehearsals continued well then. I only add the new vCenter replication and it stopped for the old.

  After the migration of all VM including device just RV improved another 5.5 ESXi host I upgraded from original host and migrated the back of some VM. I noticed that only this VM is replicated again then. All other zeroes had "no connection to the server VR: does not not." and "Violation of RPO" messages (including RVS). If I migrate the original replication host virtual computer is restored. If I migrate to another connection from host to the server of VR is lost again - no matter what a host running VR.

  Any idea, please?

  Yes, it's possible, but I just wanted to rule out any more simple explanations first. I was worried especially when you said the VR server could not ping itself, but perhaps I misinterpreted what you were saying.

  In all cases, you can verify if this is your problem by looking for a line like this in the esx.conf of the hosts that you upgraded:

  / NET/vmkernelnic/Child [0001] / tags/4 = 'true '.

  If so, remove the line in the esx.conf and restart the host. Then, once the host is back, check that the network adapter assigned to the vmkernel is an accessible IP address.

  In my view, that the part "child [0001]" may be different on certain configurations if you do not find the exact line I've specified above, check around the lines part of [another] child.

• Remote server in DW does not work

  Local view in DW works but the remote server does not work.

  A dialog box indicates that "an FTP error occurred cannot connect to the host. Please let me know how to understand it.

  You set your server settings remote instructions of your web host?

  Do you have your perform a connection TEST?  See screenshot.

  

  As Jon said, sometimes you will need to enable/disable the FTP mode passive power.

  

  Nancy O.

• Server-side include does not not on Web site

  I try to get side Server includes work on my site, but I had some problems with it. I have a server side include on 1 page where I am trying to get my head to work. So it appears fine in Dreamweaver CS5, but it does not appear on my site. I tried the file and virtual and do not seem to difference between the two (in Dreamweaver at least). I'm hosted on GoDaddy, if that makes a difference.

  What additional information do you need to solve problems?

  Thanks in advance for the help.

  Try

  http://CSS-tricks.com/php-include-from-root/

• Automatically upload files to server on save does not (CS6)?

  Hello

  My workflow includes using a local test of Linux server. I noticed that by selecting the "automatically download files to the server when recording" box on our local test server does not download files on the test server when you press CTRL-s to save the current file. However, by pressing CTRL-SHIFT-u not uplaod the file very well.

  Anyone else notice that this function does not work or is this something else in my configurations?

  Thank you!

  I met the same problem in DreamWeaver CC 2015. The problem proved that auto-push save only works if you have the appropriate box selected for TWO tests server and remote server. If it is activated only for one, it won't do.

  Be extremely careful with this because you must ensure that you have selected in the files, the test server pane otherwise it will be auto-push on your production server!

  This bug must REALLY be resolved to prevent disasters...

• OTP-S5100 - "unable to start the server" - but he DOES not see my computer!

  I had a devil of a time with this option. Finally, and without provocation, the ability to reference the media from my computer suddenly started to work a couple of months. However, as I add new video files, new files do not show upward (but in the same directory as the others). Finally, I tried to move all files to a new directory and then he set up through media center to access this directory. It worked fine, but then the same thing again - new files, but that it would not come up on top of the list.

  Ended up trying to move all the files a cople of days earlier in another directory again. Now, the unit sees my computer, but it is grayed. When I click on it, all I get is a screen that says "failed to start the server. Wait a few moments, and then reselect the same server or put the server media market. "Then, of course, I closed the PC & BDP several times, but does not. Just a list of my computer all the gray.

  I checked the settings of my PC (Windows 7) - Home Group (check), automatic WMP streaming (check), firewalls (none... check). New programs (none... check). Nothing seems to work.

  A big hug of gratitude to someone out there who can tell me what's happening!

  Thanks in advance!

  You may need to update your content to media library... I don't know how, but I use Tversity and I must have analyze directories from time to time.