Firewall Windows cannot change some of your 0x8007042c settings error code.

Similar Questions

• Firewall problem: "firewall Windows cannot change some of your settings. Error code 0 x 80070424.

  My firewall doesn't let me turn it on. McAfee says that my computer is in danger because my firewall is not on and tried to turn back on. It gives me an error code and says ' firewall Windows cannot change some of your settings. Error code 0 x 80070424.

  Because you pay McAfee protection antimalware we assume that asked for the help of McAfee Support? http://service.McAfee.com/

  Try this: http://support.microsoft.com/mats/windows_firewall_diagnostic/

• Firewall Windows cannot change some of your settings. Error code 0 x 80070424

  I use 8 (64-bit) windows, try to turn on "Windows Firewall".

  Get this error "firewall Windows cannot change some of your settings. Error code 0 x 80070424.

  I tried to locate the "Windows Firewall" services in the service (in Services.msc) database, but this service is not listed. Help, please

  Thanks Robear,

  Today, I just made "Reset PC" to make it back to my factory setting (even if I lost all my data, but I've got to the top of it). Then, I used "Norton Removal Tool" to remove Norton who was there in orginal factory setting.

  Now, I tried to run "Windows Defender" & "Windows Firewall" both are running without any problem.

  Thank you much for the help.

  Vikas

• I can't turn on my firewall, error: Firewall Windows cannot change some of your settings Error code: 0 x 80070424

  My firewall is off, I went to control panel to turn it on and it comes up saying "Windows Firewall cannot change some of your settings Error code: 0 x 80070424" any ideas how to fix or what's goin'?

  Hello

  What do you use for security?

  If you are using an Internet Security Suite, it will have its own firewall and disables the default Windows Firewall.

  And you should have only one firewall to avoid problems related to the operating system.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Malware to disable your firewall and your safety programs.

  Scan of Malware in Safe Mode with network.

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Once in Safe Mode with network, download and run RKill.

  RKill does NOT remove the malware; It stops the Malware process that gives you a chance to remove it with your security programs.

  http://www.bleepingcomputer.com/download/rkill/

  Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  See you soon.

• Firewall Windows cannot change some of your settings. Error code: 0x800704c

  I get this message when you try to turn on my firewall. "windows firewall cannot change some of your settings." "Error code: 0x800704c.

  Hello
  Follow these instructions to fix the Windows Firewall:
  Download and install repair Windows: 
  http://www.TechSpot.com/downloads/5314-tweaking-Windows-repair.html
  When the repair of Windows opens, click on the tab to start repairs, click Start. Unselect all the boxes except for the following:
  -Reset the registry permissions
  -Reset the permissions of files
  -WMI repair
  -Repair Windows Firewall
  Then click Start. Once it is finished, restart your computer. Let me know if this helps you.
  Brian

• How to fix error "firewall Windows cannot change some of your settings. 0x800745b error code.

  I have microsoft essential security installed on my laptop & I also downloaded & installed a trial version of avast antivirus.

  & I don't know what other changes on my laptop has been filed, that caused this error, when I'm clicking to turn on Windows Firewall, it invites you to use recommended settings & by clicking "Use recommended settings" it gives an error "firewall Windows cannot change your settings. Code error-0x800745b ".
  How to solve it?

  Follow the steps in the link and check if that helps.

  I suggest you follow the steps in the link below (with an emphasis on the method 3 and 4)

  http://support.Microsoft.com/kb/2530126>

  `~`

  The current time and the date now in Baja California, Mexico

  22:28
  Thursday, May 16, 2013
  DST - 0700 UTC
   
  UTC/GMT is 05:28 Friday, May 17, 2013
              
  Current weather conditions in San Felipe

  Sunny90 ° F / 32 ° C

• "Windows Firewall cannot change some of your settings. Error code 0 x 80070424 ' how to fix this?

  I get this error: "firewall Windows cannot change some of your settings. Error code 0 x 80070424"when I try to turn on the Windows Firewall (Windows 7).  I am also unable to start my computer in safe mode.  My computer has been infected by the virus 'Win 7 Security 2012', which is what caused this damage to my system.  The virus also seems to have removed all the system restore points before the infection!  I believe that I have the virus completely deleted.  I used Malwarebytes Anti-Malware, Spybot Search & Destroy, Ad-Aware, Kapersky Virus Removal Tool, antivirus Ati Avira (anti-virus program I was running when my computer has been infected by the virus) & Microsoft Security Essentials.  I ran the Scan SFC, a tool for emergency response Microsoft Support, Microsoft FixIt, ComboFix, & Tweaking.com Windows Repair all-in-One.  Repair Windows Tweaking.com seems to be turned Action Center back, where I now get a message that: "Windows Defender is turned off" & it does not seem to recognize MSE as my anti-virus program.  I need to know how to get Windows Firewall works again & get Action Center working properly again.  My computer has a partition with my Windows Recovery on it, but since I can't start in safe mode, I can not also start the restore partition to do a "repair" install, or even restore to factory settings!  Can anyone help?

  Also, when I use a search engine on internet, I get re-directed to a site that has absolutely NOTHING to do with the result of the research, and I click on... I am not that so that is proof that the virus is not COMPLETELY gone or not.

  Hello

  Make sure that the PC is clean (free from zero rootkit to access before you try this corrected)

  This problem of firewall is commonly found on vista and windows 7 (64 BIT OS)

  Download the two files from the registry

  Windows Firewall - MpsSvc

  BFE - base filtering engine

  Run them and click YES when you receive a UAC prompt

  Restart your PC

  Press Windows key + R and type

  regedit , and then click ok

  Reach

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\BFE

  Right click on it -permissions

  Click ADD and type

  Everyone, and then click ok

  Now click on all

  Below, you have the permission for users

  Select full control, and then click ok

  Press Windows key + R and type

  services.msc , and then click ok

  Start the service database and then filtering engine service windows firewall

  If you still get this error

  Windows could not start the Windows Firewall on the local computer. See the event log, if services not windows contact from the seller. Error code 5.

  Download and launch this key

  Shared access

  Click YES when you receive a UAC prompt

  Reach

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\SharedAccess

  Right-click on -permissions

  Click Add and type

  Select full control and everyone

  You should be able to start the firewall now

  You can also Miss defender of windows security center, BITS and windows update services

  Download

  Security service center - wscsvc

  Windows Defender -windefend

  BITS - BITS

  Updated Windows - wuauserv

  Run them and click YES when you receive a quick restart, UAC the PC
  

  
  

  Good luck

  * Edit *.

  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk...

• Windows Firewall cannot change some of your settings/error code ox80070424

  I get this message "windows firewall cannot change some of your settings/error code ox80070424.

  In a little more detail can help, like when is the message that appears and what OS you have (W7 starter Edition-home premium 32 bit 64 bit etc.). When the message started to appear? either you have installed a program or had a malware attack? (If you have or suspect that you may have been attacked by malicious software, then download, install, update and run a scan with Malwarebytesfree)

  This can be interesting to read - http://support.microsoft.com/kb/968002 not quite the same message, but the same error code, i.e. at least the fixit FW.

• When trying to activate Windows Firewall manually, get code error 80070422 0 x ' windows firewall cannot change some of your settings.

  I use windows 7.

  my windows firewall was disabled. When I click on turn on the firewall, that a message "Action Center can't turn on the firewall".when I try to turn on manually I get an error report that says error code 80070422 0 x ' windows firewall cannot change some of your settings.

  can someone please help?

  PS.i recently had a virus.

  See the thread below for a possible answer:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-performance/cannot-start-Windows-Firewall-for-Vista/8d3ab846-d5a9-4DF1-bb1e-a6f4842abc63

• Cannot change anything in the action center error code and the blue screen and stops.

  I can't do anything on my computer with windows7 can not install updaets or sofyware of security I get an error code and the blue screen and stops

  OT:everytime I try to change anything whatsoever in the action center ndour windowws blue security and my computer shuts down

  Hey Chrisb,

  You did changes to the computer before the show?

  Step 1: I suggest to start the computer in safe mode and check if the problem persists.

  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2: If the problem is solved in safe mode, then I suggest you perform the clean boot and remove the program that is causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: Follow step 3 of section of boot KB929135 to reset the computer in normal mode.

  Hope this information is helpful and let us know if you need more assistance. We will be happy to help.

• 0x8007042c error code: "Windows Firewall cannot change some of your settings.

  On this subject, I've seen the thread of Nov - Dec 2009. There was no alternative to then to reinstall Windows.  They mentioned the c:\windows\system32\drivers\mdsdrv.sys as file being missing.  Is it possible to get this driver and fix the problem?. Or is there a new fix for 2009?

  A lot has happened since your response on Dec 14.  I tried your last two suggestions without success.  Finally I got to the store (Best Buy). They spent more than a week to repair.  Apparently, they found a number of damaged system files. They finally got it fixed. I brought home, and it seems to work fine for less than a day, then the same problems.

  I got to Best Buy, and this time they completely erasing the hard disk and restored the computer to the factory State. Don't really know what caused the problem.

• Windows Firewall cannot change some of your settings

  Just as the title says

  1.i don't care if you've had this problem unless you fixed and they say how.
  2.i have already gone to services, my filtering engine base is away and very well, my windows firewall service does not start and I have not even where windows firewall authorization driver thingie is.
  3. I tried this...
  Control Panel->
  Security systems of &->
  Administration tools->
  (scroll down for) Windows Firewall->
  Double-click Windows Firewall->
  Click on tab log on->
  Select this account->
  Search for a LOCAL SERVICE user (Advanced-> Find now-> LOCAL SERVICE)->
  did not work
  4.i already tried CFS scannow or something else... NOTHING! THAT'S HAPPENED.
  SO what now?

  Hello
  1 did you change on your computer before this problem?
  2. you receive an error message?

  3. have you installed any third-party software or a firewall on your computer?

  4. what exactly happens when you try to run the System File Checker?
  You can follow the methods and then check.

  Method 1
  You can follow the procedure.
  (a) click Start .
  (b) in the search box type Device Manager.
  (c) on the view tab , and then select hidden devices.
  (d) scroll down to 'firewall authorization Driver. "
  (e) click the drivers tab and make sure that the Startup Type is set to "Demand".

  Method 2
  You can run a virus scan.
  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-AU/default.aspx
  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again. He also does the disk check, and you may lose the amount of data.
  See also:
  What are the information contained in the logs of the event (Event Viewer)?
  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

   

• Home Premium 64 bit Ultimum 64-bit upgrade fails during execution. Error message: Windows cannot configure some components

  Upgrade problems. Home Premium 64-bit to 64-bit Ultimum.

  
  
  I tried several times to upgrade Vista Home Premium 64-bit Vista Ultimate 64-bit. It ends at until the end, but when it restarts, it says windows cannot configure some components and starts a restoration to Home Premium. So frustrating. Any help would be appreciated.

  Both Home Premium and Ultimate out of support in two months.  One company will receive technical support from Microsoft (security patches, etc.) after April.  Here is the political Support of Vista page.  'Not applicable' entries in the column of Extended Support mean that this edition is not eligible for updates, including critical security updates, after the end of standard support on April 10, 2012.

  http://support.Microsoft.com/lifecycle/search/?sort=PN&Alpha=Windows+Vista

  If you can, return your ultimate and buy business.  I realize that copies of business are becoming difficult to find.  Another option is to upgrade to Windows 7.  I suggest professional since Ultimate offer very little more than Pro (just the Bitlocker and multilingual support) and is also not intended for extended support after Windows 7 standard support ends after 2014.  Professional will extend support through 2019.

  Having said all this, I also had problems using the update with Vista installation option.  In many cases I resorted to the use of the custom installation option.  That does not work, but of course this means using Windows Easy Transfer to save your files and settings and reinstall your programs.  What I eventually learned with Vista upgrade can take all day even when all goes well, then there is not much time saved during a custom installation followed in any case of reinstalling the software.

  One thing you can try is to completely remove your anti-malware software.  Just turning it off is not enough because some antivirus programs install a watchdog on the part of the registry.  If something prevents the writing of registry entries at the end of the upgrade you so you would get a rollback.

• Captivate 8 - firewall Windows has blocked some features on launch

  I saw this problem written online, but have not found a solution.

  Is anyone aware of a?

  Whenever I run 8 Captivate, I get the dialogue "firewall Windows has blocked some features.

  In this case if I run as admin or not.

  Thanks in advance for your suggestions!

  Keith

  For anyone else interested, I found a solution in this thread: Firewall exception whenever 8 Captivate is started

  I just found this. Try at your own risk. But it seems to have solved the problem for me.

  Keith

• Error: Windows cannot change the password when attempt to set a password to connect to the Windows XP computer.

  Original title: Windows cannot change the password.

  I'm trying to set a password on my computer with windows xp professional and everytime I try, I get a message saying: Windows cannot change the password. Please can someone help me.

  With our thanks

  Elizabeth

  Hi Elizabeth,.

  You can follow this link & check if the problem persists:

  Impossible to change the password for the administrator account in user accounts in Control Panel

  Hope the helps of information.