Firewall Windows does not?

Similar Questions

• Firewall Windows does not use recommended settings

  Firewall service Windows is not running: does not use recommended settings

  Firewall service Windows is not running: does not use recommended settings

  Please specify:
  > windows firewall service is not running
  > does not use recommended settings

  If it running or NOT?
  Which of the above is the problem?

  RE: windows firewall service does not

  Start button > in the search box, type services > press the Enter key > scroll down to Windows Firewall and click on it...
  under the State column, it must be said... started
  under the Startup Type column, I must say... Automatic

  If it does not say that, right click on Windows Firewall > click Properties > make the changes.

  RE: does not use recommended settings
  
  Start button > in the search box, type windows firewall > looks upward at the top on the left, click on Windows Firewall > click on change settings > put on a blue radio point (recommended) level > OK for the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Portege R830 - Windows does not start after I have install Comodo Firewall

  Good afternoon

  I bought today a Portege R830, and after the Windows configuration, the first program that I installed was the popular free Comodo Firewall. After that I restarted, Windows 7 unbootable. It would be stuck on the user login screen and I know it's a problem with the firewall because if I do a system restore to the restore point created by Setup of firewall, windows restarts.

  So I ask if there is any inconsistency between the firewall and software on the Toshiba. A that someone already had this problem? I tried to solve this problem throughout the day with no results. I even re-installed Windows 7 using the Toshiba Recovery and the problem persists. I really like the Comodo and I want this firewall on my laptop, but Windows does not just start!

  Any help would be apreciated.

  Hi jillefsky,.

  Have you disabled the Windows Firewall before you start with the installation of Comodo Firewall? As far as I know, Portege R830 is delivered with preinstalled McAfee security software and you must remove this program before you install other security tools.

  Generally this has nothing to do with Toshiba and it s advisable to contact Comodo directly. They may know about this so they can give you a proper answer.

  But I put t understand why this program is so important to you. Windows already has an internal firewall so that these programs are not necessary in my opinion. Just install a good antivirus like AntiVir and enable the automatic updates of Windows. All that s!

• Firewall Windows has been disabled by a virus or Malware. System is now cleaned and Salvation took up the Task Manager, but the Windows Firewall service does not start. How to run again.

  Firewall Windows has been disabled by a virus or Malware. System is now cleaned and Salvation took up the Task Manager, but the Windows Firewall service does not start. How to run again.

  Suggest you read the following: http://answers.microsoft.com/en-us/windows/forum/windows_7-security/virus-recovery-error-codes-0x80070424-and/28ed2ede-076c-4955-bb49-44d0c2ee1ed3

  I hope this helps...

• Windows 7 firewall service does not start automatically and cannot be started manually

  Update Vista Home Premium SP1, removed the Comodo, removed AVG Free 8.5, put upgraded to Windows 7 Home.

  Attempted to set security. Firewall is "red". Could not be defined. Snap-in did not work (0x6D8).
  Have rubbed the registry for References all Symantec and Comodo and the computer restarted.

  Firewall service is set to start "automatic."
  Log tab is set to "This account" with a password - I have no idea from this password (and don't know what it is).  Seems that log on should be "Local System account" with Desktop interaction

  Falied given departure following the event log:
  Log name: System
  Source: Service Control Manager
  Date: 2009-11-06 12:19:25
  Event ID: 7024
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: VISTALAP
  Description:
  The Windows Firewall service is stopped with the special service error access is denied...
  The event XML:
  http://schemas.Microsoft.com/win/2004/08/events/event">
   
     
      7024
      0
      2
      0
      0
      0 x 8080000000000000
     
      99759
     
     
      System
      VISTALAP
     
   
   
      Windows Firewall
      %%d Ko
   
  

  Repository is consistent.

  Suggestions?

  Hi dynameme,

  What is a home or work computer? Is there any server/domain mean?

  Try a startup repair, it sounds as if you have an error with the help user account to run the service.  Startup Repair may be able to fix this.  If this isn't the case, then you should try to repair the Installation.

  STARTUP REPAIR

  If you have a Windows 7 installation disc, you need to restart (boot) your computer using the installation disc. If you do not restart your computer from the disk, the option to repair your computer will not appear.

  If you have a Windows 7 installation disc:

  1. Insert the installation disc.

  2. restart your computer.

  Click the Start button, click the arrow next to the button lock and then click on restart.

  3. If you are prompted, press any key to start Windows from the installation disc.

  Note: If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change your computer's BIOS settings. For more information, see BIOS: frequently asked questions.

  4. choose your language settings, and then click Next.

  5. click on repair your computer.

  6. Select the operating system you want to repair, and then click Next.

  7. in the System Recovery Options menu, click Startup Repair. Startup Repair can invite you to make choices as it tries to solve the problem, and if necessary, it may restart your computer, because it makes the repairs.

  Installation of Windows 7 repair

  Information

  This will show how to do a repair of difficulty your currently installed Windows 7 upgrade installation and to preserve your user accounts, data, programs and drivers of the system.
  THE ELEMENTS THAT WILL BE RESET TO DEFAULT OR AFFECTED:

  • Sounds
  • Services
  • Visual effects settings
  • Device drivers - make sure you have these practice to reinstall. They don't always stay after the installation of repair (upgrade).
  • You may lose your themes custom because no permisions on the old themes. Go to the themes folder hidden in C:/Users /(User-Name)/AppData/Local/Microsoft/Windows/themes, then take ownership of the folder themes and you have now all your themes back.
  • It was reported that you can also lose your Media Center gadget after doing the repair facility.

  WARNING

  You will not be able to do a repair installation of upgrade mode without failure. Installation of Windows 7 DVD that allows you to do repair installation with must be the same or more recent Windows 7 update (ex: level updates Windows or MS) that the currently installed Windows 7. If the DVD is an older version, then you can not do a repair with her installation. You must have at least 8.87 GB of free space, more if you have a larger facility, on the hard drive that Windows 7 is installed on do a repair installation.

  Here's how:

  1. start Windows 7 and log on to an administrator account.

  2 disable the 3rd firewall, antivirus or other security program to avoid what it possibly to prevent the installation of repair of Windows 7 upgrade.

  3. place your installation of Windows 7 in DVD Player DVD while in Windows 7 (step 1) and click on the option of setup.exe run in the AutoPlay window in the currently installed Windows 7. (See screenshot below)

  NOTE: If the AutoPlay window does not open, then open the folder on the drive in the computer and run the setup.exe file.

  4. click on the install button now to start the installation. (See screenshot below)

  5. clear the I want to help make Windows installation better area (unless you want), then click the go online to get the latest updates for the installation option. (See screenshot below)

  6. Windows 7 will now check online and install the available installation updates. (See screenshots below)

  7. check the I accept the license terms box, and click Next. (See screenshot below)

  8. click on the upgrade option. (See screenshot below)

  9. installation of Windows 7 will now begin. (See screenshot below)

  NOTE: During the installation, your screen may flash, and the computer will restart several times.

  10. after the final reboot, you will see this screen for a while. (See screenshot below)

  11. Enter your Windows 7 product key number. (See screenshot below step 12)

  12. uncheck the automatically activate Windows when I'm online box unchecked, and then click the next button. (See screenshot below)

  NOTE: You can activate Windows 7 later after you make sure that it runs correctly. (See step 19 below)

  If you chose to automatically activate Windows online when you set up your computer, automatic activation begins trying to activate your copy of Windows three days after you sign in for the first time.

  13. click on the settings recommended. (See screenshot below)

  14 select your time zone and set your date and time settings, and then click the next button. (See screenshot below)

  15. click on the option for the location of your computer select the settings appropriate to apply to this place network location type. (See screenshot below)

  NOTE: It is best to choose a Public place for the best security.

  16 Windows 7 will now prepare your desktop so that it starts. (See screenshots below)

  17 check if you are missing files from the user. If you are, then you can copy them from the C:\Windows.old or protected which is hidden, C:\$INPLACE.~TR operating system and files backup C:\WINDOWS.~Q. (see screenshot below)

  18. If the power goes out step 17, then you can run Disk Cleanup. You will need to click on the own key file system first and then check that the files ignored by Windows upgrade previous installations of Windows and Windows upgrade log files boxes. (See screenshot below)

  NOTE: This will remove files C:\Windows.old, C:\$INPLACE.~TR, and C:\WINDOWS.~Q from step 17 above.

  19 refresh your performance Windows (WEI) index score.

  20. when completed, all you need to do is to activate Windows 7.

  Let us know if this helps,

  Kevin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Firewall service does not start after the removal of Virus

  Hello

  I believe that my son's computer has been infected with the Trojan.Agent.Ed virus.  I managed to remove it (from different folders in AppData), but a few vestiges remain of course.  The windows firewall service does not start - it throws an exception to access denied on startup and when I try to start the service manually.
  I tried to run the Sysinternals Process Monitor to display all events ACCESS DENIED and checked the permissions on the key to registry MpsSvc in HKLM\System\CurrentControlSet\services and compared to a corresponding Windows 7 machine.  I've even exported the key MpsSvc and sous-branches of the laptop in good health and tried to import into a failure, but the import does not seem to occur, even if it gives a message "imported".
  I also tried the troubleshooting of Windows Firewall that confusedly says:
  "Windows could not start the Windows Firewall... Not fixed
  "Set permissions for the registry keys involved"... succeeded
  "Windows Firewall service is not started. Not fixed
  "Starting the Firewall Service"... succeeded
  Any ideas would be most appreciated.
  Thank you.

  It seems that I solved the problem by running this:

  http://KB.ESET.com/library/ESET/KB%20Team%20Only/Malware/ServicesRepair.exe
  that I found in a post on this thread:
  http://social.technet.Microsoft.com/forums/Windows/en-us/5366225a-46e7-4D6C-A389-8bd18a5c3aad/Windows-Firewall-damaged-by-Windows-7-antivirus-2012?Forum=w7itprosecurity

• Windows does not update with error code 8024402C

  Windows does not update with error code 8024402C

  Quote your full version of Windows (for example, WinXP SP3;) Windows XP 64 - bit SP2; Vista SP1; Vista 64 - bit SP2; Win7; Win7 64 bit) when you post in a forum or a newsgroup. Please do it in your next reply.

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  A (another) Norton or McAfee application has already been installed on the computer (for example, a free trial version which is preinstalled when you bought it)?

  0x8024402C error code when you try to install updates on Web Windows Update or Microsoft Update sites:
  http://support.Microsoft.com/kb/900936

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Status window component-fax fax Windows does not appear when sending or receiving

  I can send and receive faxes using Microsoft fax in windows component, but fax status window does not appear when sending or receiving.  How can I fix?

  Assuming that long ago, that you have installed Service Pack 1 for Windows XP, your problem may be a badly configured third-party firewall.  See http://service1.symantec.com/SUPPORT/nip.nsf/4a29389c214c78ea88256c75005f451a/713afacbd4135e0a88256c77007e526f?OpenDocument

  Also take a look in the event viewer (start > run > eventvwr > OK) for errors or warnings related to the fax system.  If you find one, double-click on it to open the event properties, and click on 2 pages below the up/down arrow icon to copy the events to the Clipboard.  Then paste it in your response.

• All metro UI apps windows does not just keep trying to load

  Hi, for the past 2 days, all my windows metro UI apps do not work (messenger, mail, people, bing, etc.). However applications 3rd party like Tweetro works very well. I want to try to uninstall applications, BUT the app store window does not work too. Can I know how to solve the problem? When I click on the apps UI subway windows, all I get is a loading screen which doesn't stop loading. Thank you.

  Honestly I've read a lot about this. There are so many messages that MS needs to make some kind of announcement. There are many theories about what is causing the issue, and most of them seem to be centered around the antivirus, firewall and other. I read that Windows 8 has strengthened its security and protection with Windows Defender anti-virus. I had the same questions as everyone else. My metro apps wouldn't work. Click it, you get a splash screen, and then it seems to be load with points of spinning in a circle and that's all I could get. I worked on this for 2 days and with extreme frustration. I took some advice from some other people having the same problem and I completely uninstalled Mcafee Security Suite, rebooted the computer and low and behold, that resolved 'my' problem. As for others, I can't say. I've never once refreshed or borrow. I wish I had done just a couple of days! I hope you make the right decision for yourself. I have now no antivirus 3rd party anything on my system. I'm a careful Internet user when it comes to the internet and I stay away from any type of file-sharing sites. I hope this does not come back and bite me. Good luck!

• the preview window does not show the document that I'm about to print in Sierra

  The preview window does not display the document that I'm about to print. This problem started as soon as I upgraded to Sierra. It occurs in many applications - including in Microsoft Excel 2011.

  

  

  Hello, David Bry1,.

  Thank you for using communities of Apple Support.

  I understand that when you try to print from a number of different applications, you do not see the preview of the document you are printing. I would like to assure you that I see the preview as well when I print. Let's see how we can get this resolved.

  I advise you to ensure that the printer software is up-to-date on your printer Brother DCP-7065DN. Please choose 'Available Software' brother printer and scanner software for macOS Sierra, El Capitan, Yosemite, and Mavericks

  If a software update is available, please install and then test and see if you get the same result.

  Have an amazing day!

• "Private browsing" window does not close after opening web site

  "Private Browsing" window does not close after the opening of a web site; He remains on the side of wight of the screen and cannot be closed.

  It turns out that partially Wen site on the left side of the screen and can be closed.

  Problem solved. Bookmarks removed and replaced and now everything works according to plan.
  Thank you

• After installation, the main Thunderbird window does not open (send emails)

  Thunderbird has been an automatic upgrade this morning (02/05/14).
  Now, when I open it, it opens and I can even see the preview of the main screen when I hover over the icon in my launch, but the main window does not open.
  If I right click to compose a message, I can, and it does not send. But I didn't see the main screen.
  I closed it, closed the process of thunderbird. I moved my profile and reinstalled Thunderbird.
  Same problem ever time.

  When I try to open the registry, it says it's corrupt. But CCCleaner does not seem to fix. Don't know what to do next.

  Thanks for any help you can provide!

  Can you post a screenshot of your problem?

  http://support.Mozilla.org/en-us/KB/how-do-i-create-screenshot-my-problem

• Firefox process starts but window does not open.

  All the all of a sudden when I launch Firefox 11 window does not appear, but the process will start in the Task Manager. Yesterday everything worked fine, but when I came home in the evening Microsoft Security Essentials was not from, it is protection. I got it working by installing it again. Just Firefox does not open the window for me.

  -J' uninstalled Firefox and restarted the system
  -Ran CCleaner and Spybot S & D
  -Manually reset the registry values with regedit.
  -J' deleted all AppData and plugin files.

  To verify that your system is clean, perform the following steps (no official Mozilla tips, just good practices of personal experience)

  Download and install MalwareBytes Anti-Malware, run a full scan. http://www.Malwarebytes.org/

  Download and launch TDSSKiller http://support.kaspersky.com/faq/?qid=208283363

  Check all Windows updates.

  After doing this, restart your Pc and this time, when you try to start Firefox, hold down the SHIFT key while it starts. This forces Firefox in safe mode. Let's see if that helps.

• When I open a link in a new window does not display the web address.

  When I open a link in a new window does not display the web address. What have I done wrong? It used to work and it works if I open the link in a new tab, the problem is that I hate to use tabs prefer a new window every time... Help!

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• When I click on my desktop shortcut icons in the new firefox 4 I get a dialog box that indicates that windows does not find that the website

  I have improved the previous version of firefox to the new firefox v.4 and now all the shortcut icons I used with the previous version display a pop-up dialog box that says that windows does not find this website, check the spelling - address - etc. But immediately after this window opens the Web site loads. I tried to load the original site, delete the old shortcut and drag the new shortcut to my desktop, but Firefox always gives me the same message.

  See:

  • http://KB.mozillazine.org/Windows_error_opening_Internet_shortcut_or_local_HTML_file_-_Firefox