Firmware is a BIN file?

Similar Questions

• Looking for a Firmware bin file?

  I was installing rockbox, and asked that the original file, firmware or something, like a bin file? Where can I find it?

  As I said, it's a different material. The downgrade would only take the courage of your v2 and replace them with the innards of a v1.

  I don't know Rockbox is working on it among their many other projects - which they are out of the goodness of their heart, geek, with little or no help from SanDisk, so you'll need to be patient.

  You can see how they're going to www.rockbox.org.

• Recovery of WAP54G - must .bin file in sync - or a .trx SEU command line method.

  Any chance that someone has an answer to this?

  I saw the same question and but never answered.

  I can't find all the "brick recovery methods require .bin files but not the .trx file.»

  What a great job if I get something like dd - wrt...

  However, in order to restore to a linksys firmware using a tftp Send WAP, I need the .bin file to sync I well... which seem to no longer exists.

  Quick, I found some old links that gave details on how to get it back (old linksys links) but the ftp server that hosted these files no longer exists.

  Any suggestions on where to find the .bin files or a recovery method using the new trx files?

  use the web interface, or replace the device is simply a lousy option.

  /Shrug everything ive tried does not work.  (including a version 1.0 and version 3.1) Yes 2 different routers.

  If it uses the bin files I can recover very well... including the warranty voind jtag method.

  Simply not an image provide Linksys (cisco), the TRX files.

  the Open source versions work fine...

  While WAP is not dead.   I can't use an official /shrug 'image '.

  What im reading there is a very very small differences in the .trx .bin files from...

  Think im stuck using dd - wrt for now.

  BAH - after a final test... rename the .trx file .bin for sync... Flash as usual.

  wait 3-5 minutes

  and then

  the IP address for the wireless est.245.1 not as I used too... the old version is still bounced a.1...

  So yes the .trx will work...

  /headsmack

  Thanks for the doublecheck... even when a person behaves like an A$ $

• How can I replace the mime types of server, always get the mp3, rar, sid, bin files directly in the dialog box "where do you want to save this file?"

  I used to be able to click on MP3 files, the way back when, and Firefox asks where I wanted to save. Nowadays, it opens a new tab with a flash drive.
  By clicking on the "unknown" files, like .sid, .prg, .zip, .rar is ' this is a BIN file. [Cancel] [Save] ». It does not give me a check box for "always do this".
  I would like that option to edit so that certain types of files, such as PDF, regardless of mimetype, always get opened in a new tab if you click. Also some types of files, based on the extension, always go directly to the dialog box "Where you want to save the file?", without worrying if there is a viewer or a builtin player or not. In my Firefox (41.0.1 14.04LTS 32-bit Ubuntu) I have never the choice "do this for these files always" more.
  Googling led me to delete my file mimeTypes.rdf and since file extensions can even "well known", such as .zip, are treated as BIN files and I get the box Cancel-or-Save for those too - again without the choice of "always save the BIN files.

  These files are send as Content-Type: application/octet-stream and Content-Disposition: attachment;
  To send files in this way, you cannot save an automatic action.
  You can see that in network monitor.

  • https://developer.Mozilla.org/Tools/Network_Monitor

  Content-Disposition: attachment; filename="TURRICAN_AMIGA_PORT.sid";
  Content-Type: application/octet-stream
  

• FF reads JPG files without. JPG ext as BIN files

  Hello
  Why the IMG in the http://oiswww.eumetsat.org/IPPS/html/MSG/RGB/AIRMASS/FULLRESOLUTION/index.htm and other satellite service are read as BIN files? Is - Why FF compels me to SAVE their rather than show them (after application of picture) just like the Opera browser? Good God! MDE is jpg, then they must be binary. But the msg window informs me that "I chose to open a... file which is a BIN file...". "etc. I send the letter similar to FF Feedback a year without tangible result. Is there a setting 'secret' to change the behavior?
  Concerning

  Thank you very much, it works.

• Unarchiver and StuffIt do not open the bin file

  I have the OS x 10.9.5 and installed Unarchiver or Stuffit to open bin files and they do not work. Can help you him?

  Thank you

  IRIS

  the .bin files are executable. There is nothing to check them.

• Try to install the driver, get error "no program associated to open. BIN file"XP

  Trying to download and install a driver and a version update system for my Zoom H4n recorder, I get an error message that says something like "no program associated to open. BIN files. How can I fix this so I can manage my music. Thank you!

  This is how you do it .

• a program has taken over my .bin files. How can I restore them

  a program (VLC media player) took over my .bin files, to be able to open them only with her, how to restore the .bin files to open the original windows program

  Hi rowdydave,

  Try these steps and check the result.
  Step 1: Associate a program
  see How to change or choose the program that starts when you double-click a file in Windows XP .
  b. try the steps in the article and check the result.

  Step 2: If the problem persists, uninstall VLC media player
  see How to change or remove a program in Windows XP .
  b. Once you have deleted the program, restart the computer and check the result.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• file associations for .bin files

  It seems that the *.bin files have been associated with a video player program. How do I tell - associate these files and how the *.bin files are used by windows and other programs?

  There is no standard definition for the *.bin files and no program specific to open. Boulder computer Maven
  Most Microsoft Valuable Professional

• How to open data.bin file without using exe?

  I had downloaded a game on the internet its really big in size, I downloaded 2 GB of files and when decompressing, it would be gb(that's_what_the_installer_say).i 8-5 files there are 4 data1.bin, data2.bin and so on until data4.bin and one installer with it, but when I install with installer there is unpack to the slowly so I want to decompress without using the installer some alternative program to make it work. But when I try to open it with ultra iso or winrar it shows the error invalid or unknown format. What should do? Sorry for my bad English.

  A .bin file is a binary data file, you cannot unpack without the program who can read binary data.  You must continue to use the correct Installer.

• Recovering accidentally deleted and removed from the Recycle bin files

  I use windows vista Home premium and accidentally emptied my Recycle Bin. I am a student in full-time and I deleted my paper by chance and I emptied my trash, before realizing that I deleted my book that took me 2 days to write. I checked microsoft word, but it wasn't there. I need to know if the files that have been removed, sent to the Recycle Bin and emptied the trash can be recovered. Please help me, my article is due within 24 hours and I don't have another copy saved anywhere.

  Hello

  Recuva - free - recovers files deleted from your Windows computer, Recycle Bin, digital
  map of the camera or MP3 player. And it's free!
  http://www.Piriform.com/Recuva

  Forums - help here
  http://Forum.Piriform.com/

  I hope this helps.
  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• $recycle.bin files on external drive

  When McAfee scanning my WD external drive, it takes hours and hours as it analyzes the many files called $recycle.bin. I mean hours and hours.  I cannot find these files on my external hard drive, nor indeed on my computer either.  Is there a way to find and delete the 'old'?  Thank you.

  They are hidden and system files.  Go to start / Control Panel / folder Options / view and check the box to show the hidden files and folders, check the box to show system files and uncheck to hide extension for known file types.  Click OK and close.  Go back to your external drive, and you should now be able to view the files.  I have one on my system at the root of the C: drive as the first entry.  I do not understand why you have so much of.  I'm not sure about the consequences of the removal of the old (do NOT delete all) - I've never seen a case where there were many.  I suggest that you create a system restore point before you do any delete or rename.  I would also first try to rename Recycle1.old or something like that first and then see if everything works (especially your Recycle Bin and deleting files).  If after a few days, everything seems to work fine, so go ahead and delete the renamed files and it should go.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• [Solved] There is no record of $recycle.bin, files will be always permanently delete. How to fix?

  I use a computer my company laptop, installed with Windows 7. I found that I can't delete files to the Recycle Bin. Still, files will be permanently deleted without going through the trash.

  I'm sure that the setting of the trash is not "remove files immediately when deleted ' and with the setting of the necessary size, more than 8 000 MB.

  Then, I checked that, deleting the files from work very well to other readers, but only C: does not work. In addition to this, C:\$RECYCLE. BIN is missing, but D: and E: the $RECYCLE. BIN. I think that is why there is no problem another push to use the trash.

  In addition, I also tried in many ways,

  • RD /s /q C:\$RECYCLE. BIN
    Does not work, because there is no
  • sfc/scannow
    No problem, nothing fixed.
  • Create a $RECYCLE. BIN manually
    Does not work
  • Copy the $RECYCLE. BIN to other readers
    Displays the message to trash corrupted, does not work

  Help, please.

  The problem is solved with this thread

• Cannot restore backup files. Error: delete the Mediaid.bin file.

  Original title: cannot restore the backup of the external hard drive files. Converted from Vista to Windows 7. Download error concerning "" folder Mediaid.bin which must be removed before I can restore the files. Help!

  Cannot restore the backup of the external hard drive files. Converted from Vista to Windows 7. Download error concerning "" folder Mediaid.bin which must be removed before I can restore the files. Help!

  Hello

  Follow the steps given by Ki Chi Leung on 22 rd February 2010 at 16:07 in http://social.answers.microsoft.com/Forums/en-US/w7performance/thread/5e368f95-5142-4b9f-afb2-ccff9b646433

  Diana

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How to open a .bin file?

  File Association problem

  File type: binary data file

  File extension: file .bin for sync

  This is a video training DVD: 'learn Quickbooks Pro 2011.

  Hi cheza24,

  I suggest you take a look at the site of Intuit here, select the support tab:

  http://QuickBooks.Intuit.com/product/training/learning_quickbooks.jsp

  If you continue to have problems, I recommend to contact them directly:

  http://support.QuickBooks.Intuit.com/support/ContactUsPhoneList.aspx

  I hope this helps!