Firmware TV Stor.e

Similar Questions

• Need firmware for Store.E tv

  Hello!

  I had to format my TV store because I wanted her to be in FAT32, but now I can't find the firmware on the Toshiba support page and my RD StoreE TV does not work on the TV.
  Any way I can find the firmware somewhere?

  Thank you!

  Toshiba is not a good company in terms of support for firmware. The problem is that they post on their site the original frmware nor any upgrade. Known bugs have been identified and... Since that time no response, no solution, nothing. I think that I will no longer buy any product of Toshiba (hard drive or anything else). For your question, it seems strange to me that formatting a HARD drive you have lost the firmware... unless there is something written on the boot record of the Toshiba store which, once lost, does not have the device works correctly.

• STOR. E TV can play some formats - is it possible to get the firmware update?

  Is it possible to get the update of firmware for STOR. E TV, because this product cannot read many formats.
  I woud would better update of firmware for video - AVI (Xvid, AVC, MPEG1/2/4), MPG/MPEG, VOB, MKV (h.264, x.264, AVC, MPEG1/2/4, VC - 1), TS/TP/M2T (MPEG1/2/4, AVC, VC-1), MP4/MOV (MPEG4, h.264), M2TS, WMV9.

  Can someone REPAIR THIS TOSHIBA in the FUTURE?

  Hello

  It would be always great if a device would be supports all possible formats
  Allows how such as firmware updates or similar would be released
  Who knows what guys are going to do in the future, we'll see.

• Copy of file Stor.E TV problems +.

  I have a TB Stor.E TV + 2 and I had problems copying files using the on-board system and copy it to a USB key or external HARD drive.

  Some files show as invalid.
  I discovered that this does not happen or at least it happens less if I connect via USB and copy from a PC.

  Someone else has noticed this and is at - it solution.

  Hello

  It seems that there is a new firmware for Stor.E TV +.

  [3.5 inch StorE TV + 2.12_UI1.0 | http://eu.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=EU&selCategory = 4 & selFamily = 271 & selSeries = 254 & selProduct = 6350 salt ShortMod = null & language = 13 & selOS = all & selType = all & ye arupload = & monthupload = & dayupload = & useDate = null & mode = allMachines & search = & action = search & macId = & country = all & selectedLanguage = 13 & type = all & page = 1 & ID = 80742 & DISO =-1 & driverLanguage = 42]

  According to the people in this forum, this firmware has solved some problems with file transfer
  It also helps you hope...

• Hosting devices USB with my STOR problem. E TV

  I had my STOR. E TV for about 2 years now, and note this problem since I was.

  Problem: when you host a usb (flash or ext hdd) stor.e tv device detects the device and open the USB key. However when I try to play a file, it starts off the coast of the fine, but about a minute in the picture begins to shift making the file impossible to watch.

  I heard from his colleagues to see if there is updated firmware for the tv stor.e as this may help.

  Please if he would, and where would I go to find it?

  Kind regards
  André

  > I heard by his colleagues to see if there is updated firmware for the stor.e tv because it might help.

  There is no firmware available for television Stor.E
  If you go to
  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp?service=EU
  and choose
  -Options
  -Drive devices
  -Multimedia hard drives
  -3.5 store TV
  you won't find any firmware

  But there is a firmware for Stor.E TV +.
  But I put t think its compatibility with the TV StorE

• Store. E TV - cannot play video movies

  Hello!

  I bought a hard drive type 50 GB media to Store.e tv.
  My problem is that I can not play almost any video films.
  Only some files xvid, and none of the files I've converted plays the hard drive.
  Can someone post me which converter I have to use or display the firmware original pls?

  On the toshiba site, I can't find the firmware...

  Sorry for my worse English ;-)

  THX

  Hello

  The new firmware can be downloaded from the Toshiba UE driver page.
  http://www.Toshiba.EU/innovation/download_drivers_bios.jsp?service=EU
  But it seems that the firmware for Stor.E TV is not available.
  Only the firmware for Store.E TV + is available (update) and can be downloaded. But I'm don't think that its compatible with Stor.E TV.
  Choose which leads to the download area.
  -options
  -drive devices
  -Multimedia hard drives
  -3.5 inch StorE TV +.

  According to the file formats supported.
  The manual says that this device supports.
  Playing movies-> DAT (VCD), VOB (DVD), ISO (DVD), MPG (MPEG-2/1) and AVI (MPEG-4, XviD) files
  -> MP3, WAV and WMA music playback
  -> JPEG photo playback

  Pro & WMA Advanced profile and WMA with DRM are not supported

• Stor.E TV + wifi

  Hello
  I tried 2 different models of D-Link usb dongle, and none has been recognized by the Stor.E TV +. Is there a list of compatible dongles somewhere?
  Thank you.

  Hello

  Have you tested the USB dongles on another device (computer) if they work properly?
  Have you installed new firmware for Stor.E TV?

  I checked the user manual, but I can't find information on compatible USB dongles.

• Stor.E TV + firmware

  Hello!

  I would like to know if there is any chance to get to info/docs on Store.E tv + firmware?
  I want to add new languages and customize the icons and so on.

  Any help would be appreciated.

  Thanks in advance,
  István

  Or is it possible to have the source code for the firmware downloaded maybe?

  Thank you

• Store TV + firmware and Samba

  Since there doesn't seem to be much interest at Toshiba to straighten their firmware that I looked for other options. In another post, I found that the Stor.e TV + and Noontec V8S are basically the same. I've studied this and this seemed to be the case.

  OK, so I took the risk and updated the firmware of my Stor.e TV + Noontec V8S latest firmware website noontec V3.0816.13_V8S.

  The update went well without a hitch (took about 2 minutes of an old drive flash 256 MB connected to the back of the USB port on the unit, because I formatted before using it) and some of the irritating downsides of the Toshiba firmware has been resolved. Samba has worked in some way, but I was still not able to download songs directly on the Stor.e more wireless, which is the only other feature I need currently. The irritating remote control buttons were replaced by how any sane person could use them (I had changed my universal remote control to correct this, will have to change the settings if I kept the updated firmware) the new firmware seems solid, but I do not USE THE CAPABLITIES VIDEO, so I can't comment on that.

  A major drawback of this update for me, it's the small screen of the device to become much less readable. Looks like there is a problem with the police on the new firmware. I use my Stor.e only as a music player flac, and since I don't have it connected to a TV the small screen is essential for me to select tracks or discs. I have 300 + discs, the Stor.e is an excellent cheap media player, which connect me to my STEREO through a DAC system.

  I therefore had to change to the firmware of Toshiba to correct this display problem and stopped trying to get sorted Samba. Looks like I'd still use USB to download music to the Stor.e when I buy the new CD. What a pity.

  Either by the way, the new firmware of Toshiba is very similar to the old firmware, in what is lacking the possibility to start the Samba. In the readme file, Toshiba says that the new firmware corrects a problem with the network, but I think it's probably the smallest issue that most users have with the firmware of Toshiba.

  UPDATE:
  After some research, I learned that the MVix Ultio is just like the Noontec player, and some users flashed their Noontecs for the MVix firmware successfully. It was much less obvious if the Mvix and Toshiba are the same, the MVix photos different from the Stor.e, but I decided to give it a try anyway.

  So I have the TV Stor.e + updated the latest MVix Ultio (downloaded from the site Web Mvix) 3.12 firmware. Note that it is the standard Ultio, NOT the pro. Also note that with this version you don't have to (and in fact will not be able to) install the drivers of Samba and separate bitTorrent, as stated in the manual. These seem to be only for the Ultio pro and are already included in the standard firmware Ultio.

  This solved all my problems with Samba, and the display with the Noontec firmware problem does not exist with the Mvix firmware. A whim, I noticed with this version of firmware is when I try to open the visit from the Samba browser neighbor he sees not all hard disks. Seems to be a disk formatting question (I formatted the disc via the menu Store) I can see readers on my other Stor.e TV +. I know that Samba still works however, as I can access my Stor.E in exploring through a wireless router (it appears as Venus under Network on Windows 8).

  As I said previously, I use my Stor.e to play .flac files only, so cannot comment if the Mvix firmware has problems with playing other files or formats. I do not think that there will be major problems, even if, as it seems Mvix regularly update their firmware to fix any problems (NOT like Toshiba!)

  If my suggestion to those who want to get the firmware updated for their Toshiba Store TV + is to go for the MVix 3.12 firmware. He can still back up the firmware update from Toshiba (downloadable from their site) if there are problems.

  You do this at your own risk, however, if brick you your unit don't blame me...

• Store 1 TB TV | PA4209E-1HJ0 - firmware need

  Hey everybody, I googled all the posts that I have on this subject and I have only found one that unfortunately had a firmware hosted on mediafire which expired already.

  On this site I can not even find the store TV firmware (1 TB |) PA4209E-1HJ0) and it drives me crazy, cause it didn't work so I formatted it (I thought he had as... a rom, I don't like getting in shape and it works always got right?) and now I'm left with a useless thing...

  What is someone a little update their firmware so I can get this working again? If the model is different but similar id be happy to try at least... I don't know what to do.

  If you want to help and by mail (or have an alternative) is here: [email protected]...
  It's a big problem, I can see what everyone else has written: s. thanks guys!

  * @ Dave_H *.

  Link does not work properly. I was able to download the file. You must click on download button at the bottom of the info data and file size

• Stor.e TV does not (need firmware if posible)

  I recently bought a TV 1.5 TB store and as it did not work for Ubuntu I formatted it and made it fat 32. Now it does not work on my TV when I plug, in the background of the original menu appears but not the files or any other option. If I press the config. on the remote, I can change audio or video settings, but that's all.
  If someone knows a way to fix it please help me.
  I need also if possible the original firmware or all the original files inside the apparatus, including folders hidden.

  Thank you

  I do not have this HARD drive, but the situation is complicated. If there is a firmware update, it must be available on the Toshiba download page.
  I don't know what to say, but maybe you should contact Toshiba service.
  I mean they have access to the database of Toshiba and I think they can help you with all this.

• TV Toshiba Stor.E 1 TB PA4209E-1HJ0 SYSTEM FIRMWARE UPGRADE?

  Hey

  I just bought a toshiba stor. Media Player 1 TB E tv, but it does not support formats mkv video & others like rmvb
  Y at - it an update of the system firmware that I can Flash the BIOS?
  If Yes please give me the link to it?

  Note: I him have not found on the support page

  But I read that the Stor.E tv 2 TB support video file formats, that I'm looking.
  Would it not possible to use the same bios firmware on the 1 TB?

  Thank you & best regards

  > But I read that the Stor.E tv 2 TB support video file formats, that I'm looking.
  Yes, but you said that you found some info this firmware update would add some videos I format didn t find these info, so I guess it was just an idea and not true info

• Store.E TV + updated with Firmware not supported

  Hi all

  Since then, I was unhappy with the original firmware due to the absence of some support from subtitile.

  I updated it with playon version PV73100_v7.06.r1199 playon.unixstorm.org firmware

  Now my device is functional, but not on the remote control buttons work except the power button

  I do not know how to uninstall. :(

  Can someone help me on how to uninstall.

  Thank you

  Try this page:
  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp?service=EU

  Choose here:
  Options
  Training devices
  Multimedia hard drives
  3.5 inch StorE TV +.

  Now you should be able to get the firmware 2.12_UI1.0

• Toshiba STOR. E TV + firmware update

  Hello

  Y at - it any update of unofficial firmware for the STOR. E TV + series of products? I see clearly that there is no upgrade official firmware...

  One delivered with the product resembles "work in progress" (you can see this throughout the entire user interface, which is awkward and very "90 years", but especially if you access the device using your browser - although this could be useful if your calculation is rusty and need a little help to add base :)).

  In addition, despite the fact that the product is on the market for more than a year now, there is no update firmware (despite the obvious need for a). I sometimes wonder where the release date would have been if the time of the product on the market would have been extended in order to have a fully functional product right out!

  Developers of Toshiba @: If you don't bother to release a firmware at least give the code "as what" to the community. This way you will definitely find someone willing (out of pure passion) all you had to do (for the money you make as developers, part of those we pay for this product as customers).

  Thank you.

  STOR. E TV +?
  I feel betrayed

  :(

• Data store is not mounted automatically after updating the Firmware of the LSI

  I've recently updated the card RAID LSI firmware on my ESXi 5.5 system (patched and update top of page)

  When I rebooted, took place the following:

  1. the associated VMFS volume RAID was mounted

  2. the data on the volume store was not mounted

  I mounted the data store manually and restarted my VMs

  Do I have to re-signing the Volume and/or the data store to raise it properly.

  Steve

  The command should be ok and do the same thing as the command esxcli esxcli storage vmfs snapshot mount -l label|-u uuid (for details, see http://kb.vmware.com/kb/1011387).

  André