First 14 elements does not install

Similar Questions

• C309a printer first: software C309a does not install

  Can not get the software downloaded to install into the machine. I comes with a USB error. (no I do not write it down 'yet'). Has been able to set up the 1st computer for them through the wireless setup. Then the 2nd must be configured through the network connection. I read that you need to install the package. I'll try that, but if it is something like the first computer, I feel that it will not be installed. I'll come back with results later today or tomorrow. TY.

  Thnaks for the info.

  Try these steps and let me know the results:

  1. In Windows Explorer, type %Temp%, in the address bar and press ENTER.
  2. Open the last HP installation folder, that begins with 7z (e.g. 7z1234S)
  3. Open the installation folder.
  4. Rename usbready.exe to usbredy1.exe.
  5. Browse a level upwards, back to the main HP folder and run Setup.exe

  Now follow the installation and the check for the difference of the ay.

  Kind regards

  Shlomi

• first 13 elements will not install, think I run Vista when done, I have Windows 7

  Help?

  The last window where you have to click on the button install, right, this is gray. An error message says that the installation would not be executed as he says that I am running Vista.

  I use Windows 7 Service Pack 1.

  However, I did a reboot on my laptop and click set up. Everything was fine. First items installed without a hitch. At that time, it was almost midnight and I forgot to come back here and say.

  Thank you, Jeff.

• Serial number Photoshop elements 14 & first 14 elements does not

  I bought items at a retailer and the serial number is on my receipt. After the hunt, my tail through each guest of get-serial provided and have my redemption refused code after you set up an account I'm stumped. I have now a dollar $150 disk that used to install on my macbook pro... Why is not the serial number on the CD cover and why should I go to a forum to find answers from Adobe?

  You can always install and run the software.

  Until you enter a valid serial number will be used, fully functional, up to 30 days.

• First 14 elements does not load

  I had 14 items for several months.  Always well opened and worked.  But now it will not open / load at all.  In Task Manager, I get a message that says, "no answer."

  It is "stuck"loading exporterquicktimehostpm"or something like that."

  What can I do?

  Windows 10, 64-bit, etc etc.

  

  [title published by mod]

  Hi paule44110055,

  Would it be possible to remember the steps that you would have carried out FORWARDS until the problem starts to come? In addition, your computer is connected to the internet?

  You can try a reboot of the machine to operate. Please tell us if it works for you.

  Thank you

  Kamna

• First 11 elements gives error 'encountered a problem of installation of shared technologies' and does not install.

  I have Photoshop elements 11 installed, but Premiere Elements will not install because of the problem of installation of shared technologies. I'd like suggestions on how to solve the problem. I tried installing several times.

  205EdMLewis

  On what computer operating system is your first items 11 running? For now, I'll assume Windows 7, 8 or 8.1 64bits. You install the program from

  disc Setup or installation files?

  Error Shared Technologies is an old story that affects several versions of Premiere Elements on several different operating systems. My encounters with this error

  used for the program involved installation disc.

  There are many remedies at home. One that worked for me lately and consistent was the deactivation of the OOBE folder located

  Local disk C

  Program Files (x 86)

  Common files

  Adobe

  and in the folder Adobe is the OOBE you disable by changing the name of the folder in OOBE to OLDOOBE.

  Please let us know if it worked for you.

  Don't give up.

  RTA

• my serial number for adobe photoshop elements 12 and first 12 items does not work

  My serial number for adobe photoshop elements 12 and first 12 items does not work.  On adobe.com, it shows that I received the serial number is associated with adobe photoshop elements 9 and first elements 9.  I bought these products in the past, but recently upgraded to 12 items.  Can I use the Organizer in photoshop, but could not open the editor of photoshop.

  You must contact Adobe Support by chat or phone when you have the serial number and activation problems.

  Here is a link to a page with options to help make contact:

  http://www.Adobe.com/support/download-install/supportinfo/

• Bought the first 13. Does not burn dvd slideshow created in 12 of the elements.

  I created a slide show in 12 items. Recorded as WMV. Tried to burn DVDs. Download the message inviting me to try the first 13 trial. Have already bought 13 first, but which does not recognize the 12 elements.

  Tried opening 13 first, import my WMV file. Go to create DVDs. After that it seems to go through the complete combustion, I get a message that says that something is preventing the complete combustion. Provides a link that takes me to a page that is not available. Is there a way to get my 12 items to bind to the first 13? What else can I try?

  susanK

  If you have issued your slideshow Organizer items 12 to get a wmv file saved on the hard drive of your computer, you should be

  able to import that in first 13 items editor with add Media/files and folders of the editor and edit and export accordingly.

  There is no integration between the Publisher of slide show of 12 elements Organizer and first 13 items Organizer 13.

  However, you can convert the catalog 12 to 13. But it will take 13 allows you to convert the slideshow in this catalogue in its new format which

  is significantly different from what you used in 12.

  Have you updated 13 to 13.1 yet. If you have, say the program uses a new feature in 13.1 that leaves you with the .iso image file

  If you hit the burn to fail. You can take this file to DVD-VIDEO on DVD .iso image using a free program called ImgBurn.

  You can also use burn DVD/record/Publish + share on (4.7 GB) file to download a backup file containing the VIDEO_TS folder that you can

  Download DVD-Video on DVD using the ImgBurn program.

  Things to check

  http://www.Afterdawn.com/guides/archive/burn_dvd_folder_imgburn.cfm

  Organizing items help | Create slideshows

  Please check and review and then we can decide what then.

  RTA

• Service pack 3 is downloaded but does not install

  Service pack 3 is downloaded but does not install

  -Box of OpenFile said Publisher unverified; Race open error box:... ENU.exe is not a valid Win32 application

  s ' Please help, I'm surprised I need it to install TurboTax! -Jim, Salt Lake City

  Although it is certainly possible that your system is compromised because he is so far behind on security patches, probably the download has been altered.

  What antivirus application do you use? What's his current subscription? Its subscription has already been authorized expiration?

  Assuming that the answers to the last 2 questions are Yes and no, respectively, download, install, update and run a scan with each of the following elements (both free).  The scans will take some time, so start one up, go and do something else for a while then come back and start the second time the first completed.

  MalwareBytes AntiMalware
  SUPERAntiSpyware

  See the following for instructions: http://groups.google.com/group/microsoft.public.windowsxp.general/msg/a066ae41add7dd2b

  You will need more of sp3 to install and use TurboTax.  In particular, you'll need .NET Framework 4 (IIRC), so be sure to complete step 5 of the related instructions.  Well, you will need to restart and then revisit Microsoft Update several times until no more need (critical) implemented to date are available.

• Satellte C870 (PSC8EE) - display driver for Win8 does not install anything

  Hello

  I have a Satellite C870 bought in October last year.
  I have level of Windows 7 to Windows 8 a first time just before Christmas and has worked well.
  (A few small issues suchas as necessary before installing the display driver, but all Bios Update worked fine)

  A few days ago I had a system crash and the HARD drive died.
  Send the Sateite to replace HARD drive and came with Windows 7

  Has started the last installation of evening back to 8 64 window.
  But the display of the Toshiba site driver does not install anything? Catalyst still not...
  Just get the request to confirm if I want to install the product and then nothing...

  Tried the two drivers offered from the 19/02 and 26/02, but with the same result...
  Tried to install the driver directly from AMD announcement was a message my card was not supported
  I tried Windows 7 driver from Toshiba site for my machine and got the same message...

  Graphics card is an AMD 75610 M

  And of course I have admin access and also tried to run the installation in administrator mode files.
  And other drivers install normally (Lan Drivers, drivers Wifi, Tempro, mode eco etc.)

  Thanks for your help

  Hello

  The driver that you downloaded is a zip package.
  Unzip everything first.
  Then you will see a single .exe file in the unzipped folder.
  This exe file is also a package.
  Therefore, unzip the .exe file too.
  Right click on the exe file and select unpack here
  Now, you will have access to the files together. Now choose Setup.exe or Install.exe

• Microsoft Office Publisher KB980470 update does not install!

  KB980470 update does not install!

  Tried several times for 2 or 3 days...

  o here are the steps I took... which I think should work:

  (1) go to the Microsoft Download Center:http://www.microsoft.com/downloads/en/default.aspx
  (2) look for each update code that begins with the letters "KB" and followed by a set of numbers (i.e. KB974234)
  3) click on the link for the download and then click on download and run. I think you have to accept an agreement, then click on continue or OK
  4) repeat for all downloads that you can not install
  (5) run Microsoft Update new and click search the updates and if updates have been installed successfully, they should no longer appear in the updates that must be installed.

  I don't know if it is not relevant or if it helped me succeed to install updates manually, but before I manually installed my updates I followed the instructions David_O posted under this threadhttp://social.answers.microsoft.com/Forums/en-US/vistawu/thread/f3390e74-9961-4aae-8a05-554c1a9cf1a2?prof=required&lc=1033 . I suggest that first of all try to download manually by following my directions. If it does not, then it's a possibility instructions of David resolved an issue that allowed me to download them manually disable Microsoft downloads site.

  I can't believe all the research and the suggestions of the technicians did not work... sometimes your own research is the best!

  I hope this helps! Good luck!

  "I tried and it works!

• code KB9811433 646 and KB981715 does not install

  code KB9811433 646 and KB981715 does not install

  Sorry, you have problems getting your patches installed. I have a number of things for you to look at.  First of all, your Background Intelligent Transfer Services set to Automaticand started and Windows Update ? You can check these settings by typing services.msc in the search box of the start menu.

  Sometimes in order to get patches to install correctly, you must perform these tasks manually.

  (1) Download Center to visit Microsoft: http://www.microsoft.com/downloads/en/default.aspx.
  (2) search for each update code that begins with the letters "KB" and followed by a set of numbers (i.e. KB979309).
  3) click on the link for the download and then click on download and run.  You must accept the agreement and then click on continue.
  (4) repeat this process for each download of updates Windows could not install.
  (5) to rerun the update from Microsoft, click find updates.  If all goes well, it will show that you are completely patched.

  If this does not work, try to run the Microsoft OneCare safety scanner.  Sometimes it will solve problems of hidden registry, or erase viruses can prevent the installation of patches: http://onecare.live.com/site/en-us/center/whatsnew.htm. Click full service scan, and then Quick scan (full scan takes a long time to complete). Try the patches.

  Barbara

• Why my PC does not install updates? Although located to automatically receive my last update was February 2015 and all others have failed.

  Original title: updates

  Why my PC does not install updates? Although located to automatically receive my last update was February 2015 and all others have failed.  Although I tried to reset nothing help.

  Have also tried to download Windows 10 but computer spends all day looking for updates, but nothing happens.

  As its been almost a year that it is updated, you may be better off to backup your data and backup of your entire system, so you can get back to this point at least if something goes wrong. Then:

  Update your anti-virus software and run a full scan. Then download, install, update and run a full scan with Malwarebytesfree. Keep it free, no need to start a trial etc. Malware can be a cause of failure of the updates, the scan won't take long to run and should report something nasty, if its there.

  Then you can try the following:

  1 convenience store update Windows - http://windows.microsoft.com/en-US/windows7/Open-the-Windows-Update-troubleshooter

  2 system update readiness tool - http://windows.microsoft.com/en-us/windows7/what-is-the-system-update-readiness-tool

  3 components of reset update - https://support.microsoft.com/en-us/kb/971058

  4. check that "Windows update service" and "Background Intelligent Transfer Service" are listed and running according to the details in this article - https://support.microsoft.com/en-us/kb/2730071 "

  If the above does not help, consider trying a 'repair installation system' - http://www.sevenforums.com/tutorials/3413-repair-install.html if you have windows installation discs, or a 'factory reset' (updated) If your PC came with no windows disk and was preinstalled. NOTE - in case backup your data and your system first in the form of data may be lost if something goes wrong, and data will be lost in the case of a factory reset.

  If you do not want to reinstall again, post back with more details, that is at least what is the error code when the updates fail? (find an update failed in "view history update", right click and click details.) Check a bit to see if the same error code. ). Then someone else can we hope to help more.

• I paid for my series/product number code, he entered through the service for verification of the adobe product and my eligibility to audit has been approved. Now my Adobe Photoshop and first 14 elements will not be displayed on my Adobe account.

  I paid for my series/product number code, he entered through the service for verification of the adobe product and my eligibility to audit has been approved. Now my Adobe Photoshop and first 14 elements will not be displayed on my Adobe account.

  Available downloadable Setup files:

  • Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC, XI, X | Suite X | 9,8 | 9 standard | 8 standard
  • Captivate: 9 | 8 | 7 | 6 | 5.5, 5 | 1
  • Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2
  • Lightroom: 6.4|  6| 5.7.1| 5 | 4 | 3
  • Photoshop Elements: 14,13,12,11,10 | 9,8,7 win | 8 mac | 7 mac
  • Premiere Elements: 14,13,12,11,10| 9, 8, 7 win | 8 mac | 7 mac

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• Try to download adobe first pro, but does not appear in the computer

  Try to download adobe first pro, but does not appear in the computer

  Premiere Pro is 64-bit.

  You must run a 64-bit operating system to install and run Premiere Pro.