First elements hangs when burning a DVD

Similar Questions

• Manufacturing recovery disks when the computer hangs when burning the DVD the first time

  I bought a new desktop computer HP Desktop Core I-7.  When I first connected, I started to burn the recovery disks.  The problem is, the first burned disc and then the computer locked up before burning DVD 2 and 3 and had to be restarted.  Now, I can't complete the game of recovery disks.

  The good news is that I have used the first disc to access the recovery partition on the hard disk to rebuild everything, but now I did put a good recovery.  Can I fix?  Or do I have to hope that my drive will never block?  Can I save the partition of subsequent restoration of a hard disk crash?

  Memorex DVD + R media was bad.  New media staring upward.

• Why my hard drive doesn't show when burning a DVD, but it shows if you're going to burn an AVCHD? the first items 14.1

  Why my hard drive doesn't show when burning a DVD, but it shows if you're going to burn an AVCHD? the first items 14.1 Windows 10

  

  

  Thank you

  It turns out it was 10 Windows and drivers which caused problems.

• When burning a dvd in media center of vista, video playback is jerky as I watch live TV in media center or play a video file with any player

  When burning a dvd in media center of vista, the video playback is choppy. Time to watch live TV in media center or the playback of a video file with any player. How can I fix this. my display driver allows hardware acceleration settings.

  Hello

  Try to upgrade your graphics card to the latest drivers and check.

  You can also check this link:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  If not try running SFC scan.

  http://support.Microsoft.com/kb/929833

  It will be useful.

• creation of DVD Windows guard give the error message indicating the error occurred when burning the dvd

  I'm trying to use creation of Windows DVD to burn a DVD. The program starts in mode "coding" and after a minute or two, I get an error message informing me "cannot create an error has occurred when burning the DVD DVD»  Can someone tell me what to do?

  "DVD burning speed. This option allows you to select the speed to burn your DVD. The default value is the fastest growing. Some DVD burners do not burn at full speed if you use certain types of DVD. If you have a problem burning a disc, try selecting medium or slow. "Also try another brand of blank DVD.

  Change Windows DVD Maker DVD-Video settings
  http://Windows.Microsoft.com/en-AU/Windows7/change-Windows-DVD-Maker-DVD-video-settings

  See if there is another program interfering.

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8
  http://support.Microsoft.com/default.aspx/KB/929135

• I'm trying DVD maker allows you to create a slideshow of photos and music: "year error occurred when burning the DVD.

  I'm trying DVD maker allows you to create a slideshow of photos and music. I can set up just fine. When I try to burn the DVD, I get an error message while it's coding. "Year error occurred when burning the DVD" no other information available. Any thoughts on the problem and how to fix it? I can save the project.

  Running windows 7

  original title: cannot burn DVDs

  Hello

  You can disable video filters in Windows DVD Maker, and then check.

  Video filters in Windows DVD Maker: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/video-filters-in-Windows-DVD-Maker-frequently-asked-questions

• Error when burning a DVD DVD Maker - "impossible to crΘer the cataleptic failure of dvd.

  Original title: Windows DVD maker
  I get the error (failed to create the cataleptic failure of dvd)

  Hello

  I suggest that you try reducing the burn speed in the creation of DVD and check if it works.
  Choose a speed slower burn to your DVD recorder as follows:

  1. return to the page Add images and videos on the DVD and then click onOptions.
  2. in the DVD burning speed box, selectmedium orslow.

  Also, make sure that you save the movie on the computer and try to burn it.
  If the previous step fails, then I suggest that you uninstall any third-party DVD burning software from the computer and check if it works.

  Solve problems with creating a DVD-video using Windows DVD creation
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-creating-a-DVD-video-using-Windows-DVD-Maker

  Change Windows DVD Maker DVD-Video settings:
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-Windows-DVD-Maker-DVD-video-settings

  Burn a DVD-video disc:
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-DVD-video-disc

  
  Kind regards
  Afzal Taher-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Grainy photos in slideshow PrE 11 when burning on DVD. I have read many topics, but still persists. Help, please.

  Well, the title says pretty much all this. I have a question about the grainy images.

  First of all, let me give a brief introduction on what kind of project we are dealing with here. As I read these forums for hours for the last few days I already have a good understanding of what is important, so more details below.

  Introduction:

  Video editing has started to become a real hobby. I learned to change using Pinnacle studio, but many bugs and flow forced me to try something else. Adobe for me is "the real deal" and only learn to use a program as before by right! So for this project I thought I could give it a go:

  I am changing a video of my uncle's funeral. The funeral was recorded for the grandchildren-yet-to-come. All (except a clip) was filmed using the same device. However, I don't have access to the camera, and I'm not the camera man. When the music was played at the funeral, the camera was rolling, so I added this music me and put a slide show (which aired the same day) in music.

  During the project, I made several quick quality, medium makes it to show my cousin (who dad is deceased) the progress I was making. During these renders, I couldn't note picture quality problems. Also due to the poor quality of course rendering parameters.

  Anyway. When I've finished editing, I was pretty happy with the end result. My cousin agreed so I decided to burn it to a DVD so it could be distributed more to the rest of the family. Engraving impossible at first, but later, after a reboot, everything worked fine. Then, I played a DVD on my TV and discovered that the quality of the images used in slide shows was horrible. I could recognize faces not even, it was that grainy!

  First of all. The "plug":

  Camera: Sony DCR55

  Project settings: PAL > hard drive, memory flash camcorders > Widescreen 48 kHz (I live in a PAL region: Netherlands)

  Disabled: Force project settings selected on this project

  Then the party pictures:

  All JPG pictures

  Yes, on the part of "what I already tried" (and does not, otherwise I would not have been typing this)

  What I tried so far after reading dozens of debates:

  (1) check if the DVD burner was not to blame. So I burned in a folder on my HARD drive. Similar result as what I see on my TV when I burn it to a DVD and read it.

  (2) double-check the project settings. Everything seems OK. Also when I use right click on the clips added to check if the settings are still OK. They are. As for the photos, which surprised me because video clips big screen use non square pixels and pictures of course not. (Thumbs Up for Adobe)

  (3) resize the pictures to the resolution used (720 x 576) before adding them. No improvement, exactly the same thing.

  (4) turn off ' greatness 'framesize. No difference.

  Finally, I want to address the term 'quality '. Below you will find a scale to the bottom of the image at the same resolution as mentioned earlier, compared to a still from the DVD:

  

  Top photo is resized with MS paint. Still seems strong enough.

  The background is a still of the DVD file. Note the 'graining' and the horizontal lines.

  That leaves me with 2 questions:

  (1) what can I do to get rid of bad quality photos

  (2) why did I lose horizontal pixels (as can be seen in the background image)

  If someone could help me, it would be greatly appreciated!

  Joris W

  First the mini test runs before the project of grand...

  My understanding

  a. your original photos are 3264 x 1836 pixels (16:9)

  and

  b. your video is 720 x 576 @ 25 fps interlaced per second, captured from miniDV camcorder

  Focus 1... .the source photos

  Open a new Premiere Elements project, go to the Expert workspace and set the predefined project manually to

  PAL

  DIGITAL SLR

  1080 p

  DSLR 1080p25

  To do this...

  The file menu/new/project and change the settings

  In the settings, set the project preset to the DSLR 1080p25 above as suggested.

  Before leaving this area, the new project dialog box appears. Make sure you have a checkmark next to

  "Forcing the project selected in the project settings.

  When you are in the area of Expert work, please ensure that you are working with a check mark next to Edit Menu/preferences/general "Default scale to frame size".

  Go to add media/files and folders and import your part of

  photos of 3264 x 1836 (not resized).

  Go to publish + share/disc/DVD and burn to the widescreen PAL DVD-VIDEO to DVD disc using the preset

  PAL_Widescreen_Dolby DVD.

  The quality of playback of the disc resulting using your DVD TV Player even, better, worse than before?

  Accent 2... the video (depending on the results of development 1, photos) and will be considered once we see the results

  of development 1.

  RTA

• Install the first element on a ultrabook without dvd player

  Hello, is it possible to install my first item 11 (bought last week) on my Asus ultrabook without DVD player? I already install the program with the DVD on my desk, but I need to use it on my ultrabook when I move. Thanks in advance.

  It is located on the Adobe site, on the page of Premiere Elements.

  You can even set the page to French.

  http://www.Adobe.com/cfusion/TDRC/index.cfm?product=premiere_elements&loc=en_US&promoid=DJ DVD

• Not re - encode mpeg-2 files when burning to DVD?

  Hi all

  I'm a new convert to Ulead to PE7. So far, I'm making progress.

  I have created/exported some compatible MPEG2 DVD from AVI files, I got my cam using PE7.  I have this I think that the mpeg to be the best format to keep my images in capcaity problems and long-term portability.

  However, when I import these files mpeg/mpg to PE7 to export to a folder of DVD/DVD BURN (i.e VOB format) I feel that it is re-encoding again.

  Is there a way to avoid this in PE7.

  In Ulead Moview factory there is a configuration called option " not re -Encoder MPEG2 compatible". " Is there something similar to that?

  Thanks in advance

  Premiere Elements uses a DV - AVI workflow. This means that, when working with the standard video, what you put in is converted to a DV - AVI, until it became something else. Even if you put a MPEG and you get a MPEG out, it becomes a DV - AVI, while the program works with it. In other words, MPEG smart rendering is impossible, due to the design of the program.

  Therefore, if you want to save video for use in Premiere Elements, we recommend you store as a DV - AVI or return it until the tape miniDV, rather than storing in DVD format.

• When burning a dvd, the sound is not onto the disc any ideas?

  ive tried using media player to burn a disc and also dvd maker but having no joy, because the sound is not transferred to the burned disc

  Hello

  1. what kind of content you burn?
  2. What is the burned files file extension?
  3. on which device you play the DVD after burning? What version of Windows Media Player is installed on your computer?
  4. what happens when you play the DVD on your computer after burning?
  5. are you able to play other DVDs

  Method 1.
  Check if you are able to play this DVD on another computer.

  Method 2.
  Or you can also view by exploring the DVD if t that he burned files. Check if you can copy these files to the computer and play.

  I hope this helps.

• Insert a disc recordable is not an error message recordable DVD when burning a DVD in DVD maker on Vista

  What happens when I try to burn a video to a DVD once I burned just a video for this DVD. I have tried on three dvd now and I can't burn a video on the dvd, but then when I try to add a second video on the dvd - r Verbatim DISC I JUST GET THE MESSAGE "THIS IS NOT A RECORDABLE DISC INSERT A RECORDABLE DRIVE"

  Can someone suggest a solution to this problem?

  If you create a data DVD... you are right... you can add other files.

  If you create a video DVD... (that would be a record with Windows
  DVD Maker as mentioned in the original post) you can't add more files.

• First Elements 11. Copy of DVD in AVCHD format

  I don't have a source clips and PREL project is based. I don't have a DVD in AVCHD format.

  I have Windows 8.1. I tried to burn a disc with instructions on how to burn a disc with no additional software. When I did a copy, I wasn't able to play.

  Can you recommend a burning software that will create an exact copy of DVD in AVCHD format and also to make a copy of a Blu - Ray (BD) disc?

  Thank you. Lev.

  I think Imgburn will do what you want... Read http://forums.adobe.com/thread/1322583 for notes on installing Imgburn WITHOUT any add-ons toolbar... ImgBurn to use slow burning speed your drive and use the media... I put my 1 x burn speed and allows dajuster Imgburn for the current minimum

• Band audio will not play when burning to DVD or save it to a file.  Help!

  When I edit and playback a video project, the soundtrack plays back fine.  But when I burn it to DVD or export to a file, the soundtrack is silent.  He always played audiotracks coming from the original video, but it won't play the song for the soundtrack I added to the video.  I have this problem only when I do an HD version.  The source sountrack'u file is in standard wav (44.1 khz).  Project settings include:

  HDV 1080i editing mode

  TimeBase of 29.97 frames per second

  1440 x 1080 video image size

  Thank you very much for your help!

  Welcome to the forum.

  Am I right that you burn an AVCHD DVD to be played on a BD player?

  What are the specifications for the export/share file. you choose?

  The two video Audio & Export Export are checked?

  Tab multiplexer, which occupies to DVD, or something other than "None"?

  What happens if you move your "soundtrack" Clip Audio to any Audio track empty, except for the soundtrack?

  Good luck

  Hunt

• A30 hangs when burning CD

  While burning a CD, my laptop rebooted. When I pointed out the error by using the windows error reporting system, he says that the CPU has reported a hardware error.

  Later, after having burned a few CD, he took over while burning.

  It did not since, but then again I have not tried burning a CD more. I'm currently playing a CD and he seems happy.

  The error message is a string of 0, s, xs and numbers, "MACHINE_CHECK_EXCEPTION" at the end.

  Is my burner CD dies or is it something worse?

  HI Vicki,

  Do you use the OS Toshiba (recovery CD) or your own installation of the OS?

  What burning program are you using?

  If you have XP Prof, you can look in settings - event - administration tools Viewer control - panel.

  It takes the error reported in detail!

  It may be that very little material is damaged!
  Then, you will need to contact Toshiba Service partner

  Sammy Bye