First elements of Windows 8.1 does not share the drive and folder out of operation but does not create something like never help

Similar Questions

• Error: "the drive where windows is installed is locked, unlock the drive and try again" while trying to regenerate the system

  My daughters Toshiba S955-S5373 went all green, she says while she helped the battery out. I didn't know she was in trouble. We tried to solve; However, Bad_system_config_info appears before diagnosing and resolving problems. After 4 hours, nothing has been resolved.

  I found the DVD we created initially and attempted to load that. We shut down the laptop with the power and reverse holding F12 button. I tried to boot from the DVD, but it does not read the DVD and just crossed the initially to start and diagnose and solve problems. I have waited 2 hours, but without success.

  I turned off again and I just tried to refresh the PC. He said "the drive where windows is installed is locked, unlock the drive and try again".

  I then tried auto repair but could repair. Log file C:\Windows\System32\Logfiles\Srt\SrtTrao;/txt appeared.

  I even tried to reset the PC as a last resort. But the message failed to reset the PC required A disk partition is missing.

  Don't know what I can do. Can you help us?

  Original title: Toshiba S955-S5373 will not start

  Hi Annaed,

  Thanks for posting your query in Microsoft Community.

  I can understand your concerns to your system and will certainly guide you in the right direction to solve the problem.

  Control bug BAD_SYSTEM_CONFIG_INFO occurs if the SYSTEM registry hive is damaged. However, this corruption is generally unlikely, because the bootloader, known as NT Loader (NTLDR) in versions of Windows prior to Vista, checks a hive for corruption when loading the hive.

  This bug check can also occur if some values and critical registry keys are missing. You keys and values may be absent, if a user manually change the registry.

  As per the error message "the drive where windows is installed is locked, unlock the drive and try again", I would refer to the suggestions posted by phanlon7 replied on 12 October 2013 in the next thread and check if they are useful.

  Windows crash hard drive - discount - locked, unlock the hard drive

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• Hi, bought by mistake first Element for Windows, but I have a Mac. How can I Exchange?

  Hi, I bought by mistake first Element for Windows, but I have a Mac. How can I Exchange?

  As well as the serial number does not work.

  Thanks for the reply of wour

  K

  If you received from the serial numbers for mac and win, dl just the Setup file you need.

  Otherwise, http://helpx.adobe.com/x-productkb/policy-pricing/return-cancel-or-change-order.html

  Available downloadable Setup files:

  • Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC, XI, X | 9,8 | 9 standard | 8 standard
  • Captivate: 9 | 8 | 7 | 6 | 5.5, 5 | 1
  • Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2
  • Lightroom: 6.1.1 . 6| 5.7.1| 5 | 4 | 3
  • Photoshop Elements: 14 | 13 | 12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
  • Premiere Elements: 14 | 13 | 12 | 11, 10 |8 mac | 7 mac

    Download and installation help links Adobe

    Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

  • By mistake, I downloaded PS + first elements for Windows

    I downloaded by mistake PS + first elements for Windows. I had to to get Mac version. How can I change?

    Tom

    If the only problem is that you have downloaded the wrong programs then you should be able to download the good.

    PES 10, 11, 12, 13 - https://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-downloads.html

    PE 10, 11, 12, 13 - https://helpx.adobe.com/premiere-elements/kb/premiere-elements-downloads.html

    If the problem is that you bought the wrong versions then you must contact Adobe technical support for an Exchange.

    To the link below, click on the still need help? option in the blue box below and choose the option to chat or by phone...
    Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

    Get help from cat with orders, refunds and exchanges (non - CC)
    http://helpx.Adobe.com/x-productkb/global/service-b.html ( http://adobe.ly/1d3k3a5 )

  • First Pro CC gives an error "Could not create image buffer" and crashing after installing a videocard GeForce GTX 1070.

    Hi all

    I recently installed a GeForce GTX 1070 video card and drivers current in my bench mounted, very happy for the potential break in the rendering and playback (I was using previously a very old ASUS Radeon HD 7850). I had nothing else problems since.

    When I first tried a project of creation of opening, audio refused to play (speakers, headphones, everything...) I looked at the volume mixer while playing through the timeline and no audio only showed upward). Everything seemed fine. I closed, cleared the cache, opened the first, this time hold Alt while doing so to reset the preferences. Open very well, audio read back fine, that only now first was blocked indefinitely the generation of PEK files for a short audio clip in the project.

    After a long bit of troubleshooting in the speakers, I went ahead and did a complete uninstall of Premiere Pro and After Effects, then reinstalled both programs to their current versions (2015.4 and 2015.3, respectively). No more problems of generation PEK, but something much worse. Now, whenever I try to change the CUDA acceleration enabled, I can maybe five minutes absolute performance first until I get an error "Could not create image buffer", warning of notifications of Windows that your computer is low on memory, and finally, a complete crash where the screen goes black, flickers a couple times, then stays black for good with only the mouse cursor appears on the screen.

    The images that I'm editing is all images Go Pro, no effects applied. I am doing this for a client and need ready in a week, but the constant crashing makes them difficult to work around. I can more or less run by changing the acceleration of software only, display options but it is much slower and the memory is still eaten up like crazy (if I place the open Task Manager and start to scrub through the timeline I can watch the memory usage get up to 95% in 20 seconds approximately). Reading suffers as a result once the RAM is full until almost full.

    Technical specifications

    First Pro CC 2015.4 (latest version)

    OS: Windows 10 Pro (Version 1511)

    CPU: Intel Core i7 - 5820 K CPU @ 3.30 GHz

    RAM: 16 GB

    GPU: EVGA GTX 1070 (latest drivers)

    SSD (OS and Adobe Suite installed): SanDisk SSD internal 240 GB 2.5 inch SDSSDA - 240 G - G25

    Hard drive (where I put my multimedia files): WD Black 2 TB Performance Desktop Hard Drive: 3.5 inch, SATA 6 Gb/s, 7200 RPM, 64MB Cache

    Motherboard: ASRock X 99 Extreme4 LGA 2011-3 ATX Intel

    Film source - source footage is an hour of video of Go Pro, all arranged on the timeline, no effect applied (I'm just trying change the original film in a short video).

    Type: MPEG Movie (.mp4)

    Image size: 3840 x 2160

    Frame rate: 29.97

    Format of the pixels: 1.0

    It is worth noting that, with my old dusty Radeon GPU, I was able to edit these clips with ease. No reading, no problem of image buffer. I do not see my RAM never go above 60% usage, when I got this card is installed.

    Also worth noting, that the first, I have noticed absolutely no problems, and the video card itself seems to work very well. I can play MGSV at max settings with perfect reading, as well as other graphics intensive games.

    Any help?

    It's been almost a week and I had zero problems. First Pro CC 2015.2 works like a dream! I'll go ahead and mark this thread closed.

    For those just tuning, I was able to find a solution by uninstalling the Premiere Pro and After Effects, and then reinstall them back to last known stable on my bench (Premiere Pro 2015.2 and after 2015.2 effects). So far, running these versions has been very good, even with active CUDA acceleration.

    The only downside is that all the projects I've done in Premiere Pro version 2015.4 should be re-edited from scratch. But I've had absolutely zero problems using the program, which is a relief. Hope Adobe fixes this problem whenever 2015.5 is out!

  • How can I recover my windows vista serial, the tile is broken and im missing a few numbers... __i lost my toshiba recovery CD, it is an a135/s4677, I reinstalled vista, but in the first instance. I am already taking pictures of the sticker and serial No.

    How can I recover my windows vista serial, the tile is broken and im missing some numbers...
    I lost my toshiba recovery CD, it is an a135/s4677, I reinstalled vista, but in the first instance. I am already taking pictures of the sticker and serial No. my laptop if you need if you can help me please write me * address email is removed from the privacy * thank you

    If you had not reinstalled Vista, we helped you recover the product key of Vista for running old, Vista activated using specific programs.

    But, as you have wiped the hard and reinstall Vista, we will not help you recover the product key.

    http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

    Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

    Normally, they do this for a cost of $ small.

    Using recovery disks is normally not need to insert a product key.

    See you soon. Mick Murphy - Microsoft partner

  • How can I activate Technicon in adobe elements first 13? I can see it running in the Manager of tasks as elementsautoanalyzer13.exe but didn't interrupt the process in the case where he assigned to the program.  There must be a way inside the adobe progra

    How can I activate Technicon in adobe elements first 13? I can see it running in the Manager of tasks as elementsautoanalyzer13.exe but didn't interrupt the process in the case where he assigned to the program.  There must be a way inside the adobe program to turn off because I turned it on by clicking with the right button on an image in the editor of the first, and then when you are prompted, he said he would run in the background and I said okay, now I can't stop it! .  It appears in earlier versions of first items under Edit-> Preferences-> media analysis you could uncheck it to turn it off.  But there is only a media section and in this tab, there is no automatic Analyzer to be seen.  Thanks in advance for any advice

    Rebeccah

    What computer operating system? You are in the first elements 13/13.1 editor preferences or in organizing elements 13/13.1 preferences?

    Where are you looking for in organizing elements 13/13.1 that you do not see Edit Menu/preferences /-media analysis that you do not see the options of AutoAnalzyer.

    Organizing elements 13/13.1 preferences...

    

    Please point out where you find a command to run AutoAnalzyer in the background in 13/13.1. If I right click a file, I see AutoAnalzyer perform what seems to be a time run command automatic Analyzer of a file.

    Please specify.

    Thank you.

    RTA

  • I want to connect my Macbook Air (IOS 10.9.5) with my amp stereo House (TEAC I-501DA), which has a USB connection. I followed the steps described in the manual TEAC to install the driver and my Mac says it is installed correctly, but it does not appear I

    I want to connect my Macbook Air (IOS X 10.9.5) with my amp stereo House (TEAC I-501DA), which has a USB connection. I followed the steps described in the manual TEAC to install the driver and my Mac says it is installed correctly, but it does not appear as an option in the preferences/system sounds.

    Version 1.1.2.2 El Capitan driver support, then why don't upgrade you your MacBook Air to El Capitan?

  • try to install iTunes on my windows 7, but get windows installer services are not accessible... pls help

    try to install iTunes on my windows 7, but get windows installer services are not accessible... pls help

    Transfer your question here: http://social.answers.microsoft.com/Forums/en-US/w7programs/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Why my iMac (27 inch, mid 2011) cannot run Windows 10 in boot camp? And if he can't, he would work in something like parallels?

    Why my iMac (27 inch, mid 2011) cannot run Windows 10 in boot camp? And if he can't, he would work in something like parallels?

    To be honest, Windows 10 is compatible with your Mac, but Apple does not release from Windows 10 drivers for it. There are various guides on the Internet to install the drivers for Boot Camp Windows 10 even if your Mac is not supported, but follow them at your own risk (don't forget that you won't receive help to make).

    However, you are free to run Windows 10 on a virtual machine. To do this, you can use Parallels, VMware or VirtualBox, but remember that a virtual machine will give you less performance than Windows natively on your iMac. Read-> Windows in BootCamp or Virtual Machine?

  • "The drive where windows is installed is locked. Unlock the drive, and then try again. »

    Have a laptop Envy M6-K010DX. Due to a problem of the internet while improving to win 8 to 8.1, the PC does not start correctly, and Windows Explorer will not load. Has decided to "Refresh" of the operating system and is gone to F11 restore utilities. When I go to the utility of refreshment and follow the prompts that I reach a message that says, 'the drive where windows is installed is locked. Unlock the drive, and then try again. "I was looking for support for the unlocking instructions and apart from some commands bootrec (which did not work - probably because I don't have a Win 8 disc) not much is available.

    The only access I have for execution of orders made by the tasks Manager command-line and F11. What is this 'locked' drive, anyway? Someone at - it any information on that?

    Hello Lara.

    IF you have updated from 8 to 8.1 and the process was interrupted during installation, this may damage the disc and therefore locked error. "Refreshing" the system would not be the answer that you need to clean install Windows 8 again. 8.1 update can break the bond of the recovery partition, especially if it has become corrupted as indicated.

    You must clean up the installation with the recovery discs, you must have created before you updated to 8.1.

    In addition, if you do not have the recovery disks, you can buy a set of HP or install a regular copy of Windows 8 and then update the drivers manually. HP has the Windows key now integrated into the bios.

    This forum is used on a voluntary basis and is not maintained by the HP Support for substitution of contact.

    Your message looks like not it was even 24 hours old before you decided to delete it from the original computer?

    I'm sorry to hear you had to do this.

    If you need to HP support, you must contact them directly to your country or region.

    Contact HP-Assist phone USA | HP® official site

    Contact HP worldwide | HP® official site

    Good luck with the new computer.

    Any brand or model you purchased now, don't forget to create the recovery disks/drive.

  • How to get the code produced for my Windows XP disc if I have the drive?

    Acquisition of Product Code Windows XP

    How to get the code produced for my Windows XP disc if I have the drive?  I signed the BONE when I bought it all first, but have no way of knowing if this is the way to receive a copy of the product key.

    Here are some utilities, which will display your product keys:

    Belarc Advisor: http://www.belarc.com/free_download.html
    (He did a good job of providing a wealth of information.
    However may not detect a key to office, then try one of the other two below)

    Also: http://www.nirsoft.net/utils/product_cd_key_viewer.html
    and: http://www.magicaljellybean.com/keyfinder.shtml

    Paid (free demo is available): Recover Keys: http://recover-keys.com/
    "quickly scans your system for more than 3000 + software '.
    and produces a list of software activation keys.

    13 keyfinder programs:
    http://pcsupport.about.com/od/productkeysactivation/TP/topkeyfinder.htm

    J W Stuart: http://www.pagestart.com

  • Updating my windows... Problems with the driver AMD/ATI.

    Updating my windows... Problems with the driver AMD/ATI.

    PLEASE NOTIFY

    Original title: AMD/ATI driver

    Hi Amanda,.

    1. What is the exact issue that you are facing?

    2. What is the brand and model of the computer?

    3. that you get an error while trying to install updates?

    4. don't you make changes to the computer before this problem?

    If you have a hardware device that does not properly with your computer, you probably need a driver updated.

    Update a hardware driver that is not working properly:'t-working-properly#update-driver-hardware-isn't-working-properly=windows-7 http://windows.microsoft.com/en-in/windows/update-driver-hardware-isn

    Thank you.

  • When I open Windows mail, I start to get the mail and I get it about 474 243. And then an error saying Windows mail will be closed because of an error.

    Windows mail - error and the same letter over and over again.

    When I open Windows mail, I start to get the mail and I get it about 474 243. And then an error saying Windows mail will be closed because of an error. And I start it again and I get the SAME email AGAIN, and again, it stops somewhere and closes.

    Anyone know what could be the problem?

    You can try to set up a new e-mail account and use the exact settings of the account that you have now.  This way, you will have a copy of the same account.  Then see if it has the same problem.  If it works and is not old, and then see if the old man works after this and remove one of them, if you do not receive the messages in doubles.

    If the new copy of account has the same problem, then it's a stuck message and your courier company should fix this.

    Steve

  • Windows 7 64 bit, cannot install the driver for bluetooth devices for my Motorola Droid Razr periferical

    Windows 7 64 bit, cannot install the driver for bluetooth devices for my Motorola Droid Razr periferical. When troubleshooting try to apply the fix, after trying, it ends with a message this problem "not set"...

    I finally found the help on my own. Download and install Windows Mobile Device Center. After installation, you'll swear that nothing has been installed, but there is a. The download says it's for Vista, but it also shows Winkdows 7 under system requirements. This is from the download I used.

    Go in Device Manager for each item under the heading Bluetooth with an asterisk, double-click it. Click the tab drivers, then put to update driver. Browse my computer..., let me pick from a list... Under manufacturer, select "Microsoft Corporation". Under model, click on "Windows Mobile-based device support", and then click Next. Click 'YES' in the driver warning window. Windows will now update the driver, and he will tell you, he did it with success!

    This solved my problems. Good luck with yours.