First Elements - pre-sales questions

Similar Questions

• Pre sale question: Officejet Pro X476dw - ink cartridges

  Hello

  I have a couple of pre sale question on the Officejet Pro X476dw - I hope you can help me with.

  I live in Denmark (EU) and in the book loads, it says that it comes with startup ink cartridges (translated from Danish). What these specifications of starter ink contains less ink than normal cartridges don't - if so - no idea how many pages they can produce before they empty?

  As to the number of products: it says CN461A - but to some websites, it is called CN461A #A80 - is this the same printer? And what does the #A80?

  The ink cartridges have an expiration date. What happens after that date: the printer will require new cartridges before it will print anything if it can damage the printer to use ink after the expiry date - or what the print quality is affected?

  Q: it comes with startup ink (translated from Danish). These start ink specifications contains less ink than normal cartridges only

  A: Yes.  It's half in full by a quarter from a new normal cartridge.  Pagecounts are all depends on a lot and what you print.

  Q: it says CN461A - but to some websites, it is called CN461A #A80

  A: the extra #A80 is probably a regional identifier.  Its basically the same printer but built with some regulation is necessary for your region as energy consumption.

  Q: the ink cartridges have an expiration date. What happens after that date

  A: the ink are deteriorating and are more likely to plug in your print heads and contacts.

  Q: the printer will require new cartridges before it will print anything

  A: not necessarily, but it is advisable to listen to your printers of warning messages

  Q: can the printer to be used after the expiry date of the ink

  R: damage, maybe not the best term.  It would cause clogs in the ink system that will require additional support.  When the hooves can not be erased then the printer may need to be replaced.

  Q: or what the quality of the print is affected?

  R: technically Yes, but the quality will be not noticeable in most cases with an outdated cartridge.  The ink won't be able to apply paper and take a nice full round, resulting in a glance more stained on a microsopic level.  Your concern should be on the maintenance of the equipment.

• Pre-sale question - if I buy Acrobat Pro DC does include eSign services, or are they two different purchases?

  Pre-sale question - if I buy Acrobat Pro DC does include eSign services, or are they two different purchases?

  Hi ttollefsen,

  Acrobat Pro DC subscription includes e-Sign. However, with the license perpetual Acrobat Pro DC, you will not get services e-Sign & you'll need to subscribe separately.

  Kind regards
  Nicos

• Pre-sales questions ReadyNAS104

  I was reseaching NAS solutions for my home. I watched pretty much every video and the web page, but I think I've confused ND. I am interested in the ReadyNAS104 without a hard drive.

  My home network is composed of Mac/Linux/Windows. To begin, I would like to start with 1 hard drive. Is this possible? Assuming that Yes, I understand that there will be no data protection. I think that from what I've seen, all of my computers will be able to read or write to the NAS. Can I set up folders separated for multiple users, access private or shared depending on the user and share? A document I've seen specific that the 104 can support up to 16 TB of data, another 24 TB. Which is correct? This will determine the size of my disk (4 or 6 TB).

  When I add the second disc, the 104 will be copied or JBOD, correct? With a third disc, I'll be able to do other RAID levels? Is it possible to have several volumes, also included in a RAID configuration?

  I saw documents on the DLNA/SD 480 and 1080 HD. If I understand correctly, the 104 will not high levels of video leak? But my Samsung Smart TV will be able to see the action, and I'll be able to watch my movies?

  How the expansion is provided (IE by network or USB)?

  Within RAID level configurations, I would be able to use for example a 1 to a 2 TB, a 3 and a 4 TB drive?

  Finally, this unit can serve as my Time Machine backup?

  Thanks for any info provided in advance. I hope that my questions were not confused?

  Walter

  1. Yes, you may startout with a hard drive
  
  
  2. Yes, you can set up separate, private or shared folders. For private folders, you can use the feature of private home shares
  
  
  3. When we released everything first he 16TB volumes were the maximum supported. If you update 6.4.0 (or later first) you can now have more volumes of 16 TB. So if you start with a 6 TB drive I would 6.4.0 (or later), check the update of the firmware successfully, then do a factory default (erases all the data, settings, everything) because it is a new configuration for a clean installation on this firmware
  
  
  4. It will be RAID-1 mirror, Yes. X - RAID won't JBOD when you add the second drive. When the third disc is added using X-RAID, you will have a 3 drive RAID-5 volume. If you want something different you can disable X-RAID under Volumes, destroy the existing volume - if it is already using this drive (NOTE destroying volume DESTROYS your data, in order to back up your data first) and create the volumes that you want.
  
  
  5. The 104 can stream 1080 p, but what he can't do is video transcoding of any resolution. If she can broadcast your video as it's your customer then it will be. Otherwise the video will not play.
  
  
  6. You can share USB drives on your network. There is no expansion of hunts for the 104. If you need more space than what will fit on the unit, that the best solution would be to get another unit or replace your drives with higher capacity ones (if there are higher capacity disks)
  
  
  7. Using X-RAID disks that you add must have at least the same capacity as the disks. With X-RAID disabled, you can create a volume on any disk you add.
  
  
  8. Yes, you can use this to hold the backups Time Machine on your Mac. You can use the Global Time Machine function or have spent Time Machine backup files for each user.

  Welcome to the community!

• Director of cloud pre-sales question

  Hello

  We must go to VMware of Hyper-V, precisely because VMware supports the video standard OpenGL 2.1.  I have read a lot about VMware and have received assistance from large on their part, but I have just a few more questions. [Think about the character of Peter Falk "Lieutenant Columbo" ]

  Today, we have a server in our test lab.  We want fast prorvisioning and free service for creating virtual machines.  Users need create virtual machines, self-service portal is a 'lack '.  Commissioning quick is a 'lack' because we need non-technical users to test our software in SMV isolated.

  Another "want" is the ability to script the creation of machines "quickly put into service.  We test a large legacy application and every feature or bug fix is isolated in its own branch of source control.  Once tested and approved, we merge the machines at the main branch of software.  It is for us to script to create a virtual machine in our process of generation, in this way, we create a "quick commissioning" VM, installing our software on this subject, end users can test without having to install every time like that.

  So, my questions are:

  • I know that Director/vsphhere/vcenter cloud should not all be on the same host, but it is for our QA software test lab and is not a critical situation of the mission.  The machine is a Dell R710 with 128 RAM.  This would probably be ok for our application?
  • What is the minimum I need to purchase?  Should I have the Suite Enterprise cloud to get the self-service portal and fast commissioning or is there a cheaper version?
  • I can script the creation of VMs fast-provisioned?
  • How can I search Subforums here?

  Thank you!

  • I know that Director/vsphhere/vcenter cloud should not all be on the same host, but it is for our QA software test lab and is not a critical situation of the mission.  The machine is a Dell R710 with 128 RAM.  This would probably be ok for our application?
  We demand that the DRS is turned on.  You will need to create a cluster (regarless of who in need), put the host in this cluster, enable drs in manual mode.
  Put vCenter/vCloud at the origin of the cluster to use these resources.
  Make a pool of resources and reserves (minimum values) the value to something substantial.  This will eventually become your pool of resources 'Provider', and you want to make sure that your minimum is guaranteed once you put it into vCloud Director.
  Recognize that the left all the resources of this pool are what vCenter/vCloud must work with.
  • What is the minimum I need to purchase?  Should I have the Suite Enterprise cloud to get the self-service portal and fast commissioning or is there a cheaper version?

  It would be better to talk to a sales representative.  If you buy the "vcloud suite" of any teir, it will let you install and use vCloud Director.  I think all versions will give you quick commissioning and the portal (vCloud Director himself).

  You will always need a Red Hat operating system license to install vCloud Director for deployment supported, or CentOS to a deploymnet not supported.  The vCloud unit would also work, but it's only for the proof of Concept (last I heard).

  If you do not use the device, you must also support Oracle or MS SQL DB Server to host the database of vCloud.  SQL Express to vCenter won't work (default) because it only supports local connections and other limits (total size of DB)

  The difference in versions will affect what you get with it... once again talk about sales exactly what you need.   But I think the standard should be suitable for you.

  • I can script the creation of VMs fast-provisioned?

  You just enable rapid Provisioning on the vDC organization, assuming that it is supported.  Once that done, all operations which should make a clone related shall be a linked clone.

  • How can I search Subforums here?

  Go to the forum you want to search for and use the search box.  Do not hit enter or anything like that.  You should get quick results with options, and there is a link "Search only.  Then see all the results.

• reload the OS V5-123-3466 pre-sales question

  Hello - I've been owner of a DELL laptop forever now and is considering moving to acer, but we're not off to a good start.

  On the v5-123-3466, I hope to be able to pass on the HARD for one SSD drive that seems very easy to do (unlike Asus)-however I can't seem to get a straight answer if the v5-123-3466 comes with a micro$ $oft victory-8 key or not.  normally I expect to see a key in the package or on a sticker on the bottom of the unit.

  The Asus, I just returned (and ate the restocking fee of 15% from Newegg in delivery costs more) did not have a key, where my concern.  I don't want to pay another $50 just to know that I can not reload the OS for a stupid reason like "Asus has no key.

  Jeroen x 7224 Acer customer support suggested I ask best buy, but I think it's an easy question get an answer.  It would be tragic if my switchover of Acer's Dell ended because of such a fundamental issue.

  
  

• Rocket pre-sale question

  My Sansa Clip died last Friday, and I am wrong because I listen to podcasts during travel or any other 'time' I.

  The things that I really liked in this regard were:

  -Deleting a file on the drive

  -Fast forward or rewind has become progressively more quickly you hold the button

  -Record Podcasts

  The "rocket" do all this?

  In addition, what has been the general consensus on the "rocket"? Is - more/less/same buggy as the Clip?

  I bought a Philips 2 GB today at Wal-Mart, but let me tell you: do NOT. Not a bad player self, but he did not three points above that I got so used to it. It is already in the box must be returned to Wally World.

  Thanks for your time.

  I'm not going to tell you not to buy a rocket he has what you're asking. But this is a thread on the forum to Clip the clip of 8 GB is on sale at Wal-mart for $49. I would just get another clip.

• XPS8500 pre-sales question on the Player options

  Hello

  I am seriously considering buying the SE XPS8500 for my photography business.  I'm looking in the player's options and wondered about this option:

  3 TB, 7200 RPM SATA hard drive / MIN 6.0 GB/s + 256 GB SSD SRT

  Can someone explain how the SSD gets used?  Because the ship of system with the operating system installed on the SSD so that I can then use the HARD drive of 3 TB for storing photos and docs, etc (ie. as a C drive and D drive).

  Very much appreciated.

  John

  Hi John,.

  Welcome to the community.

  I wish to inform you that there will be two hard drive that would be installed in the system. First of all would be 256 GB SSD that would be to your windows and 3 TB hard drive would be used to store personal data on the system.

  Using SSD provides the best speed of the SSD is faster than the Sata hard drive. In addition, in the event of failures of windows, you can reinstall windows on the SSD only and that would keep your data intact on the Sata 3 TB hard drive.

  I hope I could meet your request today.

  Thanks and greetings
  Sandeep P
  #iworkfordell

• Pre-sales question: how to rotate the old video files

  Hello, I can't find my answer via google.

  I would like to run some very old phone videos taken vertically, but horizontally play.  There are still more some video files vertical I want to compress to a more manageable size.  I have an older version of the compressor that does not work with Yosemite.  The new version will manage the videos for me?

  Thank you.

  N °

  I would use a NLE like final cut PRO, QUickTime Player, or MPEG Streamclip to rotate the clips.

  Good luck.

  Russ

• Pre-sale question - M476dw ADF paper weight

  I couldn't find this information - what is maximum permit paper weight using the charger of M476dw?

  Thanks in advance!

  Miro M.

  I have an answer from HP Account manager, in the Original a translated to English:

  DAS weight of the papers bei einer Scaneinrichtung eines LaserJet is 60 to 220 g vom ADF und bis zu g 300 aus der Lade.

  The weight of the paper to a sweep of a laser jet unit is 60 to 220 g of the ADF and up to 300 g of the status bar.

  Thank you all and hope this will help someone in the future.

• Questions on the pre-sales Installation on Adobe CS6

  I think to Adobe Creative Suite Design Web Premium CS6 of the local campus bookstore so I can use it with the web certificate program that I take. They have a box version I will probably get. Cheaper than the version of digital download card. I had a few pre-sales questions, before I commit to buy it. The person that I spoke on the phone was not able to answer a few questions about the software, must have been a newbie and, unfortunately, the only one in the Department at the time.

  Because I buy the version box directly from the store, can I still e-mail of studying any evidence to Adobe or is sufficient student email? How it works part of the installation of work / what's involved? Is there a serial number in the box already or will it be emailed?

  Also, my Mac can be on it is the last step, but it seems to be hanging in there. Can't afford to buy a new computer now. What happens if the hard drive is experiencing a sort of lack of data. If I need to reinstall on a new computer or a replacement boot drive, I have to repeat the whole process audit any prior to re - install?

  Once I have the degree (and to understand who will not be able to keep my student email address), how will this affect me in what concerns the Adobe software? What happens if I need to reinstall or install on a laptop (I heard that you can install it on two computers)?

  Because I buy the version box directly from the store, can I still e-mail of studying any evidence to Adobe or is sufficient student email? How it works part of the installation of work / what's involved?

  See http://www.adobe.com/education/students/student-eligibility-guide.edu.html?

  Is there a serial number in the box already or will it be emailed?

  See https://www.studentteacherlicensing.com/

  Also, my Mac can be on it is the last step, but it seems to be hanging in there. Can't afford to buy a new computer now. What happens if the hard drive is experiencing a sort of lack of data. If I need to reinstall on a new computer or a replacement boot drive, I have to repeat the whole process audit any prior to re - install?

  You check one time only. Acceptance makes you eligible for a serial number.

  To re - install after that, you install the software and enter your serial number.

  Make sure that your computer meets the minimum requirements to run CS6.

  Once I have the degree (and to understand who will not be able to keep my student email address), how will this affect me in what concerns the Adobe software?

  You can still continue using your software student after you graduate.

  http://prodesigntools.com/difference-between-Adobe-CS5-student-editions-vs-regular.html

  You will pay the normal price for the other Adobe software for upgrade or join the cloud.

  What happens if I need to reinstall or install on a laptop (I heard that you can install it on two computers)?

  Download the Installer (or use your drive), install it and enter your serial number.

  Your license allows you to activate the software on up to two computers at the same time.

  Note: the CS6 license is specific to the operating system that is works on 2 x Windows only or 2 x Mac only. You can't mix and match. However, you can mix and match software Cloud (CC).

• Adobe first Elements 13 is listed as $79.99 (alone) or WITH Adobe Photoshop elements 13 for $119.99 (for both). I bought 13 items first by itself for $79.99.   Now, I realize that I need the 13 elements of Photoshop also.     My question I

  This is my first attempt in the Adobe community. I hope I'm doing this correctly.

  Please send me an email to [email protected] If you can answer my question.

  I'll paste it again here. Thank you! John

  QUESTION:

  Adobe first Elements 13 is listed as $79.99 (alone) or WITH Adobe Photoshop elements 13 for $119.99 (for both). I bought 13 items first by itself for $79.99.   Now, I realize that I need the 13 elements of Photoshop also.

  My question is: can I put the $40 more (purchase price of $119.99 in combination) to buy the 13 elements of Photoshop? Or do I have to pay the price of $79.99 (yet) to buy the 13 elements of Photoshop?

  There is no option to upgrade on the website of the $40 more purchase price (which would be equivalent to the original price of combination $119.99) after I bought the first 13 items only ($79.99).

  gt40john

  This isn't Adobe. Instead essentially a user to user forum.

  Suppose you bought the items 13 as a download from Adobe first.

  Adobe sells more than 13 Photoshop or Premiere elements 13 elements. He sells only the latest version now (v14).

  If you bought the first 13 elements download Adobe over the last 30 days, you should be able to request a return/refund from Adobe. I do not know how he would deal with an Exchange because it sells more than 13 - May 14 deal might be involved? Just in case you are eligible, Contact Customer Care

  And, if you bought elsewhere (from an authorized dealer), you are governed by the policy of return/refund/exchange of the authorized dealer, not Adobe direct.

  But if you are not within 30 days of the purchase, you'll probably eventually find a dealer authorized to buy Photoshop elements 13, although it is still available.

  Many scenarios here, but you should have business with Adobe on this if it goes back to the purchase of Adobe. If this isn't a direct purchase from Adobe, your fate is up to the dealer.

  RTA

  Add on... Please don't include contact information in your messages to avoid unwanted nuisance to your contact information.

  A moderator may delete such information once it is noticed by a moderator.

• Question of fundamental change first Elements 7 for DV

  Hi all

  I have PE7, a quad-core Q6600 and Windows 7 64-bit.

  I captured about 6 hours of Standard definition a film DV 16:9 of the church ceremony.  Video was taken of an old Pana PV-GS320.

  The Church wants a dynamic video to be produced from the captured sequences (60 minutes more than in length).  I intend to do a lot of different effects including semi-transparent overlay video, picture in picture, inserting pictures and audio inputing the video of the ceremony.  The final product will be a standard definition DVD disc.

  I did some research about how the DV is interlaced and output to DVD must be interlaced (unless I am mistaken in this conclusion, let me know).  I also know that doing heavy editing with interlaced images (slowing/speeding up footage, zoom in and out, rotation, several overlay, etc.) may create flicker and "mouse teeth" in the video.  I also searched through these forums and continue to run in HD questions/solutions...  I guess I asking an old question that has probably been answered a long time ago when a DV tape ruled the world.

  QUESTION 1:

  So, if I may ask, in order to obtain the best results, prepare my raw images in PE7 before editing it by (1) deinterlace it? (2) exporting as progressive? (3) both? (4) leave it alone and start to change there? or (5) if I'm missing another option?

  QUESTION 2:

  Also, what the resolution would be preferable to import photos into the project?

  I know that the best way to work with any video must make as small as possible changes to it, but it's inevitable in my case.  No one wants to attend 6 hours of video...

  Thank you very much for reading my questions and I really hope that you have time to answer!  Thanks for any information!  I really appreciate it!

  -141rockwell

  Relax, rockwell. You do all this unnecessarily complicated.

  If you capture your video to DV - AVI via a FireWire connection, you will not get "mouse teeth" in your final product. The program is designed for working with interlaced video and create interlaced DVDs. The results should look almost as good as the original film. You can't damage video with "excessive change.

  Just trust the program to deal with technical issues. You can concentrate on editing.

  In regards to the photos you want to add, you will get the best results if they are not larger than 1000 x 750 pixels in size, by the frequently asked questions to the right of the forum.

  http://forums.Adobe.com/thread/431851?TSTART=30

  Meanwhile, if you are looking for help with the Basic program, be sure to check out my tutorials of basic 8-part training free of charge to the first Elements Muvipix.com support site.

  http://forums.Adobe.com/thread/537685?TSTART=0

• First elements 9 - a noob question

  Hi there been... test the trial version of first elements 9... find it quite intuitive... anyway, I love him... until now only one question: is there any similarly to implement elements 9 to input FLV files? without having to convert files before hand in a program separate?  any codec that can be installed?

  Thank you!!!

  Sorry, but first elements cannot work with FLV as source files.

• Question: Installing first Elements 10 in Windows 8.1.

  Hello!

  I installed first Elements 10 on my new PC with Windows 8.1.

  But I didn t get any icon to start the program with? At the same time, I have

  installed Photoshop Elements 10. Then I had an icon to start the program with.

  How should I get an icon for first 10 items?

  Best regards

  Gunnar

  Gunnar

  Reach

  Local disk C

  Program Files

  Adobe

  Adobe Premiere Elements 10

  then, in the Adobe Premiere element 10 folder, scroll down to see the files

  Adobe Premiere Elements 10. exe (opens to the Welcome screen)

  and

  Adobe first Elements.exe (open and bypass the Welcome screen)

  Click with the right button on the one that you want, select sent to: pop - up the list, and select "desktop (create shortcut)".

  Please let us know if you're OK with the information.

  Thank you.

  RTA