First file in queue the printer does not

Similar Questions

• I requested a copy of the document, but the printer does not respond.

  HPofficejet5610all-in-one, I placed a doc in demand, but the printer does not respond. My icon shows document it and printer status says ready. I even changed the ports, but nothing happens. When I checked on what Control Panel first shows for printers, it showed 4 printers (1 copy), then a fax (copy1). I went to default the copy1 (that computer (windows 7) placed the doc in and still does not have the printer.) The usb cable be bad?

  Running the diagnostics to http://www.hp.com/go/tools can help solve the problem.

• The printer does not and not listed on computer

  I got my printer working and we had power cut off for most of the day, now the printer does not work and I can't even see the printer on the computer more.  I thought I would unplug everything and he can resume No. when I tried to start the printer but it wont even start.

  Hi Burrabliss,

  1. what version of Windows operating system is installed on your computer?

  2. What is the brand and model of the computer?

  Because you cannot start the printer, it might be a hardware problem, I recommend you contact the manufacturer of the printer and check if it helps.

  Refer to the steps in the following Microsoft article.

  Printer in Windows problems: http://windows.microsoft.com/en-us/windows/help/printer-problems-in-windows

• The printer does not exist or is not available to this error message. Help, please!

  Hello

  I have a photosmart C310 premium which has been working perfectly.

  It is connected to my computer via wifi. For a few days when I try to print, I get this message:

  The printer does not exist or is not available at this time.

  However, when I go to my homepage of HP printer, it prints the test page and also contacted my printer, if I want to analyze.

  Help, please!

  Thank you

  Download and install this: http://support.apple.com/kb/DL907

  Restart your Mac.

  Reset the printing system:

  -Go to System Preferences > print & Scan
  -Right (or control) click in the rectangle listing your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign more to add a printer. Select the default tab on the top of the window. Search for the printer, select it, and then beside the dropdown 'Use', select the model of the printer (not AirPrint). Wait for the 'Add' button becomes available. Until it clicks.

• I put a new ink jet cartridge in the printer and the printer does not work although it is switched on

  Cartridge replacement installed on a lexmark 730 printer inkjet series all the cables and connections ok but the printer does not work

  Hello

  as the poblem started when you changed the ink cartridge contact Lexmark

  http://support.Lexmark.com/index?page=home&channel=supportAndDownloads&locale=en&UserLocale=en_AU

• Printer not responding not connections (wireless printer) is good and solid. I replaced my old router wirelessly with a router of valuation. I had to plug it, but the printer does not respond now.

  Printer not responding not connections (wireless printer) is good and solid. I replaced my old router wirelessly with a router of valuation.  I had to plug it, but the printer does not respond now.

  Is what brand and model of printer?

  I do not work unless your new router has the same SSID and password wireless as the old. Consult your printer documentation to find out how to handle the situation. For example, some Lexmark wireless printers have a program called Configuration Utility Wireless in the Lexmark folder under all programs on the start menu that is used to set up the printer when changes are made to the wireless network.

• HI - even if I installed a new cartridge (black), the printer does not recognize it

  Hello - I have an officejet 4500 - G510a, and even if I installed a new cartridge identical to that just missed, the printer does not recognize it and don't use it. I would really appreciate the help on this one. Thank you

  Also please mark it as accepted if Solution my answer has solved the problem.

• CANON PIXMA MG3250 PRINTER - seeing yellow (danger?) in the top left corner and the printer does not print

  Original title: Ms. Sue Somerville

  CANON PIXMA MG3250 PRINTER

  Yellow light (danger?) in the top left corner and the printer does not print. It was OK until I changed the inks.

  I lost instructions and can't download the manual though, like many others I tried for hours!

  I used little of this printer and just need to do simple, but urgent tasks.

  Are we supposed to it's bin and get another, then we can just get instructions and resume our work?

  I don't know about spacing in your message.  Heh

  This is a question for CANON - those who make and take over the device in question.  Everything you describe indicate that this is NOT a computer / software somehow problem and the problem would be the same if the device was not connected to any computer at all, an OS X one or a Linux one...

  These are the Microsoft forums.

  Here is the Canon forums:
  http://community.USA.Canon.com/T5/Canon-Forum/CT-p/Canon_Forum

  Here is a link to the manual for the device:

  http://www.Canon-Europe.com/support/consumer_products/products/fax__multifunctionals/inkjet/pixma_mg_series/pixma_mg3250.aspx?type=manuals&language=en#Disclaimer

  I suggest out of ink, check you removed all the "stickers" on the ink that * need * to be removed to work properly and make sure that the ink properly.  Print the pattern check nozzles and then to make sure that everything is installed properly:

  1. Make sure that the power is turned on.

  1. Load a sheet of A4 or letter paper format in the front tray.

  1. Open the output tray extension, open the paper output tray, and then extend the output paper support.

  1. Print the nozzle check pattern.

  (1) press on the button in Maintenance for poster has.

  

  (2) press the color or black.

  The ground of review of the nozzle will print.

  1. Review the rationale for control of the nozzle.

• Can generate the file TKPROF without the SQL does not finished?

  Hi all:
  I want to generate the TKPROF to the trace file file, can generate the file TKPROF without the SQL does not finished? The file TKPROF can be used? because the report is too large. My environment is ORACLE 11.5.9
  
  
  
  
  
  Concerning
  Terry

  Yes, you can run a tkprof on one incomplete (or currently being created) trace file.

  HTH
  Srini

• New wireless router and the printer does not print

  Old wireless router has failed, installed new network installation one C7280 printer.

  The printing attempt failed. The wireless network Test report indicates all PASS and Excellent, no other nerwork not detected.

  Remove the printer in Control Panel > printers.  Then:

  1. make sure the printer is on and connected to your network. Verify that you can access the printer's internal web page by accessing its IP address before continuing.
  2. click on > start > Control Panel > printers.
  3. click on add a printer
  4. Select local printer
  5. Select create a new port and select Standard TCP/IP Port, and click Next.
  6. under device type, select TCP/IP Device. Under the name of host or IP address, enter the host name of the printer (found on the network printer configuration report the generated above). Click Next.
  If you get a message about required additional Port information, then the printer is not found using the host name. You can go back and start over or using the IP address of the printer instead of the host name.
  7. Select Hewlett-Packard in the list of manufacturers and select and select your printer model. Click Next.
  If your printer model is not in the list, then select disk provided, browse the CD that came with your HP printer and select the first file begins with hp and ending with INF. click Open, then OK. Select your printer model. Click Next.
  8. If prompted, use the driver that is currently installed.
  9. He will ask the name of the printer - enter a new name or use the one existing. This will be the name of the printer that you select from other applications.
  10. we may ask you to share the printer. Make a choice and click Next.
  11. the printing area of Test Page is displayed. Go ahead and print it out.
  12. click on finish.

• HP Deskjet F2410: The printer does not print

  I have a problem with my printer after reformatting my PC.

  Product name: HP Deskjet F2410 not

  Operating system: Microsoft Windows 7 (64-bit)

  Drivers and software are already installed.

  I have the new black and color ink cartridges

  When I send command my printer does not print but in the Panel, devices and printers, in "see what's printing", everything is correct written: the Document name, status, Pages, submitted, Port. ""

  Is it possible that my printer has stopped working properly because I changed the operating system from 32 to 64-bit?

  Thanks in advance for answers

  Elena

  Hi @Elena_Kh,

  Welcome to the Forums of HP Support! I see that you have recently formatted your PC running the Windows 7 operating system and now you cannot print to your F2410 not HP's Deskjet.

  I would like you to follow the steps below:

  Please, try disabling your firewall and perform a clean boot. Now, follow the steps below:

  1. disconnect the USB key if you use a direct connection.

  2. remove the software HP Deskjet F2410 not to uninstall from the control panel of your computers an option of the program.

  3. restart the computer.

  4. make sure that all them that software Deskjet F2410 has disappeared from the list of programs, but also your HP folder listed under all programs in your Start Menu.

  5. now, go ahead and download the software and drivers for your Deskjet F2410 (DO NOT connect USB until the software prompts you to):

  HP Deskjet F2400 all-in-One series Full Feature Software and Driver

  6. go ahead and print a test page.

  7. If you are unable to print a test page, please run HP print and Scan Doctor > www.hp.com/go/tools

  -It was designed by HP to offer users troubleshooting and problems of the functionality needed to solve many common problems experienced with HP print and scan the products related to Windows computers.

  Please let me know if it was successful!

  Thank you for being a part of the community of HP. Please let me know if this helps solve the problem by marking this message as "accept as Solution" . If you need more assistance let me know and I will gladly do whatever I can to help. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

• HP OFFICEJECT 4655: THE PRINTER DOES NOT PRINT

  MY PRINTER DOES NOT PRINT DOCUMENTS FROM MY COMPUTER OR MOBILE DEVICE. I PUT IT UP WIRELESS BUT WHEN I OPEN CONTROL PANEL PRINTING OPTIONS AND DEVICE ON COMPUTER IT SHOWS UP BY DEFAULT AS HAVE A SMALL LOCK ON THE PRINTING SHORTCUTS SYMBOL. HOPE I'M MAKING SENSE. Help, please

  Hey @TEJANA1956,

  Thanks for the information!
  
  • Wireless your Officejet currently solid, flashing, or turn OFF light?

  In the meantime, we will try to run the HP print and the tool of analysis of the doctor. Please click here to download the tool. Once the download is complete, run the print and Scan doctor to 'difficulty Printing.' Should any conflict of connection, software or driver find that printing HP and the doctor analysis tool will attempt to resolve these conflicts. Once the tool is complete test print.

  Feel free to click on the 'accept as Solution' and the 'Thumbs Up' If this helped.

  I would like to know how it goes!

• Photosmart HP 5510: The printer does not print in black

  All of a sudden, my printer does not print in black. I replaced the cartridge with a new black cartridge with the same result. All other colours print fine. I checked the settings on the device and it shows that the black cartridge is full.

  If anyone has had this problem and can offer a solution? Thank you very much.

  In the paper here troubleshooting steps can help solve the black does not print on your Photosmart 5510.  Be sure to check the events on the cartridge, as described in the document.  If you go through all the troubleshooting steps without resolving the question then can help to manually clean the print head as shown in the post here.

• I have a Dell (Dell V305) printer that is only a year. He has been guaranteed. What was happenning, is that the printer does not print up what I uninstall/reinstall.

  I'm having a problem with my printer does not print.  What I do I uninstall the printer and reinstall then it works very well for a week or two and then the problem starts again until I have reinstall the printer again.  The printer has ink, so it's not the problem. That's how I know it does not print: when I try to print a cartridge level page show empty and I can't print.  Yet once, when I uninstall/reinstall the printer, then the catridge levels show complete and then I can print.  I thought that maybe it could be that some issue that when I uninstall the printer that not all components are removed.  I uninstall not uninstall printer functionality and not the Add/Remove Control Panel.  Uninstall from the control panel would solve this problem?  Please notify.  Thank you, John

  Hi sockers,.

  1. did you of recent changes on the computer?

  2 when was the last time it was working fine?

  3. do you have security software installed on the computer?

  4. you receive an error message when printing?

  I suggest you run the fixit tool available in the link when you are unable to print on the computer and check if it helps below.

  Problems printing and printing errors

  http://support.Microsoft.com/mats/printing_problems/

  If the previous step fails then I would suggest that you uninstall the software from the printer to the computer using the method mentioned in the link below and then install drivers from the Dell site.

  Uninstall Dell V305

  Drivers & downloads for printer V305/V305w AIO inkjet

• I can't print anything I have a window saying, the coil of the printer does not work

  I had a recurring problem with random periods where my printer does not print and I get a message saying that my printer spool does not work.  How can I fix it?

  Hi LoraSwander,

  · What is the number and model of the printer?

  · Do you remember all the recent changes on the computer before the show?

  · What is the service pack installed?

  · What is the full error message that you receive with the error code as appropriate?

  For now, try to run the fix it from the link below and check off the results: printing problems and printing errors: http://support.microsoft.com/mats/printing_problems/en-us?entrypoint=lightbox

  With regard to:

  Samhrutha G S - Microsoft technical support.