First HP resources

I found a good site of HP.  Resources for the first: http://www.hpgraphingcalc.org/hp-prime-links-and-resources.html

Hi!, PVR:

Check in all of my previous post and you can see, this interesting document, defusing of HP.

Tags: HP Tablets

Similar Questions

  • Does anyone know how to link a video full screen (No button graphics) as a button to play another video program in yet?

    Please see my post from 7/27 copied then:

    CS6 still...

    I need video loop as the first Full-frame play to act as a button (if activated) to read the main program.

    Since a file .psd is necessary to create a button, I created a file .psd with syntax layer as follows: SEE. SCREENSHOT OF PSD LAYER BELOW

    Layer group: (+) Motion Menu group < I have added a space on each side more sign for this forum only note, if I leave the spaces, it transforms into a chart >

    Under layer within the MM group: (%) Video

    NOTE 1: Under inner layer MM group has a mask layer specifications manual Adobe <see screenshot below >

    NOTE 2: Since there is no visible button, < any Full-frame video must act as a button > I don't understand a (= 1) to highlight the layer

    I imported the .psd two layers in still in the first Menu to play. SEE MENU AGAIN: MOTION TAB SCREENSHOT BELOW

    Then, in the properties of the Menu tab, I clicked on the motion tab and drag the video pick whip in the video asset file < menu.mov > in the project Panel to assign the 33:06 .mov video looping as the first play in the main Menu. (See Menu file name: Midnight swim main movement Menu_5 in the screenshot below)

    I do the same with the Audio selection on the same video resource icon .mov to play the audio track with the first play Main Menu.

    Once I have 'add the video background' and 'add audio' to the menu first Play through the selection icon. Rather than place the video in the .psd correct Sub-Layer box to the left of the necessary, creates a new locked layer "background" in the main Menu of Photoshop, but with the always correct to the menu.mov...

    See screenshot below where I had first to unlock the new layer, then I changed the name of the new layer (%) Video and finally he nested within the Group of layers as an Undercoat. So as the new layer does not have the compulsory mask, I add a layer with layer mask: Add a layer mask: reveal all. Finally, I save the .psd file to allow again to pick up the first listen change / hand menu .psd.

    But when I saw the project, the first video game playing on the preview. Which is OK because it is not rendered. Then, I made the Menu driven via the icon in the preview screen. But curiously, he restores the audio but NOTE the video as menu.mov assigned (preview is empty when finished rendering) and double strangely, it makes the appropriate length of the video from the video file program! < do not forget, the assets of video and audio right is assigned correctly in the main Menu: button tab properties MOTION - see screenshot below >

    Perhaps. because the button link play first is the video chapter program main named Midnight swim. (The button link IS correct because if the viewer active / click full screen on the first video game anywhere on the screen as a button, it is supposed to start the main program)

    Bottom line - the rendering should allow preview to play as the correct play first video resource (the 33:06 menu.mov) attributed the tab not query the link main program Midnight swim. I've never met this dysfunction.

    I have the manual .pdf CS6 online and a paper copy of the CS3 manual where I took care to implement the .psd file and the recall of programming so that everything works correctly. In ADDITION, I've done this before with success, but the only difference was that my previous effort was not full-screen video. It was actually more complicated with many buttons and a sector specifically where hidden video read. My point is that it worked perfectly using the syntax above, but for reasons I can't understand, don't worry this time. It must be my syntax layer .psd or something I'm missing or wrong in yet. Please see screenshot below also diagram again.

    Any experience with the help of video Full Frame as the first play, Please HELP! I'm on a deadline, as usual. Stan Jones, you're such a champion, are you there?

    I'll get the screenshots by your request and answer tomorrow morning, Lun Pacific time 7/27.

    Thank you

    Brian Patterson

    DVD - IT Media Services

    N. Hollywood, CA

    Photoshop layers_Full frame video Main Menu_Encore Screen Capture.JPGEncore Buttom Properties - Motion Tab - Encore Screen Capture.JPGEncore Flowchart- Encore Screen Capture.JPG

    As always, I'm on a deadline.

    The part of the motion MUST BE the bottom (i.e. its own layer outside the button group). Do not use the prefix % etc. You will have only a = 1 in the Group of buttons and a background layer.

  • blank resource visa info during the first round

    Hi all

    I am trying to run the pilot of 6100 fluke on a fluke remote 6100.  When I run the initialization of the remote device, I always get the following error message:

    VISA: (Hex 0xBFFF000E) the given reference of session or the object is not valid.

    I followed the problem and saw that the visa being passed resource name contains no valid information (see below).  That is not sensible, since when I select the name of the resource from the drop-down list, the program has clearly recognized the remote device.  Why the program allow the user to select the resource of visa but won't visa valid for driver information?

    This error occur only during the first inning.  If the user run the program again, the error disappears.  Can anyone help?  Thank you!

    Yik

    When the program is run for the first time, visa name contains valid information:

    General

    The resource name of the canonical VISA = blank

    Visa refnum = white

    Session ID = 0

    I/O timeout = 0

    Type = 0 INTF

    Value = empty

    Stop? = True

    Condition

    session valid? Fake

    Instr is? = False

    Stop? True

    AHA!

    You select the resource from the drop-down list BEFORE the start of the loop?  An SR might help

  • callAS() speak only for the first Flash-RMA resources

    Hello

    I use sovereign wealth funds as interfaces to manipulate 3D annotations. This requires an interaction between the RMA ActionScript and acrobats JavaScript using the ExternalInterface class provided by Flash. When Nicole a method AS to JS I use

    this.getAnnotsRichMedia (0) [0] .callAS ('methodname');

    It works great so far. I can call all the methods a single SWF exposed via the ExternalInterface.

    But now a more complex situation has developed. It forces me to use multiple SWF files for a 3D annotation. However, I can only use callAS to call the first swf I added. If I remove it, the following will take his place. I suspect that the resources are treated in a table, and callAS will never attack the first flash element, he meets. Is it possible to address specific SWFs in the resources of the RMA?

    I already tried a kind of call-to-all-broadcasting, giving each swf AS-method with the same name, but it is still only performed by the first SWF (not quite a surprise).

    FlashMovie.call () does not work, but you NEED at least to send a parameter (so your AS function should accept one of the same type).

    For example, if the function exposed by ExternalInterface AS3 is

    function sayHello(_str:String):void {}

    then you can call in your 3D JS

    myFlashMovie.call ("sayHello", "and goodbye");

    BUT if your AS3 is

    function sayHello (): void {}

    or

    function sayHello(_str:String):void {}

    then a 3D JS call to

    myFlashMovie.call ("sayHello");

    or

    myFlashMovie.call("sayHello",true,123);

    will fail.

    The return value of the function AS3 any - if it is canceled or not, you'll see always "indefinite" in response to a call().

    Yes, I should have explained somewhere many years ago... but now, you know.

    If you want to send on any code or discuss in detail, PM me.

  • Where we will see the first incarnation of the Cloud resource model API?

    Where and when we will see the first incarnation of the API model of Cloud resources in a deployable product?

    API cloud resource model is expected to be filled in the next major release of the Enterprise Manager in 2011.

    It may be of limited availability beta phased, but has not yet committed. We will make an announcement on this forum, each time as a sandbox or environment becomes available.

  • Is it safe change a resource of media outside the first file?

    Suppose I have a calendar containing a foo.wav file.  I edit this file and save it with the same name.  When the first load this project will work right, or do I have to clear out caches or save it under these provisions advance, or anything else I should know?

    It should work fine.

    Do a test with a dummy file.

    BTW - I do that all the time with Photoshop files.  Change the original and the first project just updated on registration of the psd.

  • Error 27848. The network component installation requires a reboot first, release locked resources. Run this Setup again after you restart the computer.

    Hello

    I m trying to install the Cisco VPN client (vpnclient-winx64-msi - 5.0.07.0290 - k9) downloaded from the site of Ciscoes.

    I do not seem to be installed correctly, all I get is the error above, regardless of how many times I reboot the computer.

    I have been recently been using vpn client shrewsofts for Win7 64 bit so I suppose that West incompatibility of some or the previous installation.

    VPN-client: vpnclient-winx64-msi - 5.0.07.0290 - k9

    OS: Windows 7 Enterprise 64-bit

    Any ideas?

    Best regards

    Bjorn Rudmalm

    Sweden

    Hi Bjorn,

    It's the final thing and the best I got.

    http://www.Citrix.com/lang/English/LP/lp_1680845.asp

    Do as suggested by the link.

    Hope it works.

    See you soon,.

    Nash.

  • Since the last update, I can not choose the music I bought for the first download on my phone

    Since my last update, I can not get music on my phone, re upload it, music that I bought in the past

    Hello victoriafromrodeheath,

    I understand you have updated your iPhone 6s more iOS 10.0.2, but you can not access your purchased music. The first thing I would say is to leave the music app, sign out of the iTunes (from the settings app) account and restart your iPhone.  Then try to access your purchased again music.   Here are a few resources to explain this in more detail:

    Force a nearby application on your iPhone, iPad or iPod touch

    Open one session with another Apple ID on your iPhone, iPad or iPod touch

    iTunes, App Store and iBooks

    1. Tap Settings > iTunes and App Store.
    2. Tap on your Apple ID. If you see the Sign In option, you can change your Apple ID now.
    3. Click sign out.

    4. Go to settings > iTunes and App Store.
    5. Press Sign In, and then enter your Apple ID and password.

    Download your latest purchases

    Download a song

    You can redownload the songs on your iPhone or iPod touch, the iPad, Mac or PC. You can listen to the song already purchased on your Apple TV, but they download on your device.

    On an iPhone or iPod touch

    1. Open the iTunes Store app.
    2. At the bottom of the screen, tap more > buy > music.
    3. Press "not on this iPhone" or "not the iPod."
    4. Find the song you want to download, and then type it.
    5. Press the download icon to the right of the title. Your song downloads on your device.

    If you can't download or do not see your last purchase, get help.

    Take care.

  • ThBird: after running for some time on Mac, I noticed the loss of contact, the highest use of resources...

    Hi, first post so excuse despises.
    On Mac OS X 10.6.8.
    When I start TB he moved to processor low use (0, 0-0, 1%) after the initial activity. There are some file access.
    After some use (cannot be precise if it could be as little as first check for mail, certainly with 20 minutes) the process uses 5.5% or more at any time when TB is 'inactive' as far as I'm concerned. There is a flow of constant IO even though many are stat or similar rather than full read/write.

    Also, several times I found the most much of my contacts are not available (even my own account acting) Although some are.
    It disappears if I restart TB.
    Haven't checked but suspect that these may be contacts in my contacts OSX/phone etc. Did not time check which is common to accounts that remain - suspect they would be accumulated addresses in TB files.

    Also, I was amazed how many fonts are opened by the CT (guessing almost everyone, I opened, several 100) which seems a strange thing to do if it is not really needed. I wonder if a file handle limit results in the problem of contacts.

    I hope that this gives to encourage thoughts. I can do some searching, but the clock is ticking right now.

    (I lost the weeks pass to TB from Outlook when Virgin UK moved to gmail hosted in their own platform.) A lot of data migrated but TB helps rebuild a functional archiving messaging system.)

    cwinte said

    Just checked more closely and he are a 850 font files open and 100 or so files. It's probably a little crazy in terms of resources.

    It's weird. But he has been so on Mac for many years. Maybe even in version 2. I have not yet tracked when put obtained behavior implemented.

    The behavior is noticed in Firefox bug https://bugzilla.mozilla.org/show_bug.cgi?id=701661 and bug https://bugzilla.mozilla.org/show_bug.cgi?id=800279 Thunderbird

  • How can I configure Firefox Mobile to open webpages in default drive mode, so I use less resources and phone?

    Maybe that is not an existing function, but I imagine that there is a setting for that somewhere in all: config. I want pages on my mobile to open in default drive mode, so that the player display button is pushed to turn this mode off, rather than on.

    I want to do this for two reasons: first, so that the pages will not load not all ads (I'm particularly concerned about video ads) that sap resources from my phone and increase my use of data; and second, so that pages that are not optimized for mobile devices (which is a pretty large majority of pages that I tend to visit) will open in a more readable format.

    I'm on a stand with a pricing plan based on consumption for data, so I want to use as little data as possible when you're away WI - FI. How can I view default drive Firefox Android opens pages to?

    Mode reader must download the entire page before being able to analyze. It does not reduce the bandwidth used. An extension like adblock or uBlock hangs the content before it is downloaded.

  • Use of resources in modules disabled; is it better to remove them?

    Add-ons - disabled use resources? Remove them completely would use fewer resources? The reason I ask, I have a number of modules in a disabled state that I did not take in case I decide to reactivate/use again. I was just wondering if having Add-ons related to FF software, even in their disabled state, caused Firefox to use a more resources (cpu/ram) than if they have been completely removed? If it makes no difference that it is in the use of the ram/cpu if the disabled add-ons are deleted or not deleted, then I'll just leave off and cancelled. But given that my Firefox eats more cpu and memory the longer I use it, I am interested in getting rid of everything that consumes resources, especially if I do not really use them.

    I do not think that my question is specific to my tech sheet, but use: Windows XP Pro SP3 and Firefox 9.0.1 (which I intend to update when I finished research on which version is best for me in terms of performance, but especially the compatibility with my essential modules). Thank you for your time and attention. ~ Zorg54

    First of all, please update Firefox 20. Firefox 9 is no longer supported or secured, 20 Firefox being the only secure version of Firefox. you need to stay up-to-date to stay secure. your modules will be updated and work with Firefox 20 when you install it.

    Add-ons - disabled are just that, people with reduced mobility. They don't slow down Firefox more if they have been uninstalled. Note that updated Firefox to 20, there have been improvements in Firefox to not leave the modules slow down Firefox as much as they did in the older versions (such as 9)

  • migrate from first pro

    Hi all

    I am to change a doc that is based on 7 teams in 7 countries for a draft reform of the media edition.   I am in charge of collecting their segments (adding of more texts/music/voice) to make a solidarity program.  I work in FCPX, but despite me begging everyone to do the same, some work in Adobe first Pro CC.  But, they are producers in difficult situations, with limited access to resources, so I can't insist that they buy / learning systems

    They will send edited project, with "rushes" clips used, on a hard drive with their edited sequences and deadlines.

    I tried to export some test images by PremPro export XML, via FCP7toX.

    the result was not great - lost titles, (which I need to reference when I change style of home for comprehensive piece), transitions other than cross fade, and it seems to me that I've lost one video quality also.

    Does anyone have experience / advice?

    Thanks in advance.

    Wendy

    w andersen says:

    They will send edited project, with "rushes" clips used, on a hard drive with their edited sequences and deadlines.

    I tried to export some test images by PremPro export XML, via FCP7toX.

    the result was not great - lost titles, (which I need to reference when I change style of home for comprehensive piece), transitions other than cross fade, and it seems to me that I've lost one video quality also.

    (1) lose the title - maybe it's the sender using font characters that you do not have, or animation/effects on securities. XML is a language extremely laconic transfer - it was originally designed to transfer data between systems edit/telecine EDL and was never able to support from all but the simplest effects/title information, because she would never.

    If they give you an XML and media files that correspond to the XML, have them also export a movie finalized timeline and put it on the disk. You can ingest to use as a reference to then see titles and transitions that do not transfer successfully via XML.

    (2) there is no way of the XML code will be the effect on video quality. He calls to the same files of media used in the original edition. According to what you see, you will need to do some research, if you encounter any kind of change in quality. Can you describe what the loss of quality you see looks like, or post screenshots?

    MtD

  • Impossible Skype client to access HTTP resources

    Hello.

    It stopped working after Skype update.

    When I run it, I get the error message "Unfortunately Skype is not available now, please check your internet connection and try again.

    I'm running OS X 10.11.1 (B 15, 42)

    Version of Skype: Skype_7.16.386

    My internet connection is fine.

    To study this further, I launched Skype from terminal using

    /Applications/Skype.app/Contents/MacOS/Skype

    and I get the following error messages:

    2015-11-17 16:50:26.376 Skype [1772:127578] # Impossible to load the AddressBook class CNContactNameFormatter
    2015-11-17 16:50:28.881 Skype [1772:50f]-[GenericWebViewController webView:resource:didFailLoadingWithError:fromDataSource:]: failed to load resource critical WebLogin, error group domain = NSURLErrorDomain Code =-999 '(null)' UserInfo = {NSErrorFailingURLStringKey = https://apps.skypeassets.com/static/skype.client.login/3.0/3.26/release/languages/en-gb.built.js, NSErrorFailingURLKey = https://apps.skypeassets.com/static/skype.client.login/3.0/3.26/release/languages/en-gb.built.js} faing url https://apps.skypeassets.com/static/skype.client.login/3.0/3.26/release/languages/en-gb.built.js
    2015-11-17 16:50:28.982 Skype [1772:50f]-[GenericWebViewController webView:resource:didFailLoadingWithError:fromDataSource:]: failed to load resource critical WebLogin, error group domain = NSURLErrorDomain Code =-999 '(null)' UserInfo = {NSErrorFailingURLStringKey = https://apps.skypeassets.com/static/skype.client.login/3.0/3.26/release/languages/en-gb.built.js?b6c35c68b68b08ee63fcb5560e4b4d14, NSErrorFailingURLKey = https://apps.skypeassets.com/static/skype.client.login/3.0/3.26/release/languages/en-gb.built.js?b6c35c68b68b08ee63fcb5560e4b4d14} faing url https://apps.skypeassets.com/static/skype.client.login/3.0/3.26/release/languages/en-gb.built.js?b6c35c68b68b08ee63fcb5560e4b4d14
    2015-11-17 16:50:28.983 Skype [1772:50f]-[GenericWebViewController webView:resource:didFailLoadingWithError:fromDataSource:]: failed to load resource critical WebLogin, error group domain = NSURLErrorDomain Code =-999 '(null)' UserInfo = {NSErrorFailingURLStringKey = https://apps.skypeassets.com/static/skype.client.login/3.0/3.26/release/css/platform/mac.css, NSErrorFailingURLKey = https://apps.skypeassets.com/static/skype.client.login/3.0/3.26/release/css/platform/mac.css} faing url https://apps.skypeassets.com/static/skype.client.login/3.0/3.26/release/css/platform/mac.css

    The two first URL seems not be accessible from my browser either, but the 3rd URL seems to be OK.

    This forum is monitored by the staff of Skype/Microsoft?

    Is this a known issue?

    Is there a solution?

    Thank you in advance.

    Hello.

    I have posted the solution in a separate thread that was then transferred:

    http://community.Skype.com/T5/Mac/unfortunately-Skype-is-not-available-right-now/m-p/4199456/HIGHLIG...

    (do not know how and why the discussions here are merged onto this forum..)

  • New updates for HP first...

    Hi all!!!

    HP released a brand-new first HP updates emulator, firmware and connectivity kit.

    Resources and in a download link: http://www.hpmuseum.org/cgi-sys/cgiwrap/hpmuseum/forum.cgi?read=257514#257514

    Thanks for the forum of Franz of MoHPC to discover these updates!

    The method supported for updates is to install the connectivity kit that automatically downloads updates. The connectivity kit then just apply the update.

  • Satellite P20-932 PSP26E - on the motherboard PCI resource conflict

    Hello
    I have a Toshiba P20 932
    REF.: PSP26E-02NH9-GR
    with Windows XP

    In a first step, that the USB port not working, I reinstalled Windows XP with the drivers from the Internet for Toshiba Satellite P20.
    When I start now the following events occur:

    1. Press Start button
    TOSHIBA screen
    Press [F2] for INSTALLATION. Press [F12] to the boot device selection Menu
    1.1 if I press F2 - replace the following screen:
    ? BQ01 BIOS Version V1.10
    CPU = Intel (R) Pentium (R) 4 CPU 3.00 GHz
    ? M 047 system RAM passed
    ? 12K Cache SRAM passed
    System BIOS with a shadow
    Video BIOS with a shadow
    Fixed disk 0:...
    ATAPI CD-ROM:...
    Initialized the mouse
    ERROR
    Conflict of resources - Bus USB PCI controllers on the motherboard
    Bus: 02, device: 00, function: 00

    Press [F2] for installation

    1.1.1. If I press F2 - nothing happens

    1.2. If I press F12: nothing happens

    2. If I press ESC and start the computer, it changes immediately on the screen 2nd with counting / checking of the system's RAM and Cache SRAM... with the same error. and nothing happens if I press F1 to resume or F2 for Setup.

    Then my laptop is not booting and I do not get access to the BIOS! What can I do?

    Dieter cordially

    Hello

    The error indicates that certain devices that are directly connected to the mobo are in conflict and try to share the same resources. This happens usually when the BIOS has been incorrectly installed or the motherboard is a failure.

    In case you would recommend I affecting the default BIOS. But for that you need access to the BIOS, but it seems that it's not possible.

    It seems to be a motherboard problem. You said that the USB ports do not work. Perhaps this is the reason for the error message and question PCI Serial Bus Controller.
    You have USB devices connected to the laptop?
    If so, just unplug the laptop and check again.

    But what to say; If this does not help, I see a lot of options here. In my opinion the mobo must be replaced if it s really a motherboard problem

Maybe you are looking for