First Pro CS5 pixelation with T2i .mov files

Similar Questions

• First Pro CS5 does not not after 55 minutes of capture with intensity shuttle

  Hi and thanks for the valuable resources on this forum.

  I'm analog video capture in first Pro CS5 it using the shuttle Blackmagic intensity (with corrector time basis in the path of the video).  My shots are stopped at 54 or 55 minutes when the computer becomes inadmissible.  What happened with the codec Blackmagic movement as well as jpeg YUV 10 bit capture. Same thing if I capture with express media (blackmagic capture software)

  I tweaked my system according to the many recommendations in the forum.

  Running CS5 5.03, backup 10 minutes automatic (same problem without automatic recording or automatic check in at 20 minutes)

  Windows 7 64 bit fully up-to-date

  I7 - 930 cpu

  Gigabyte x58A - UDP5 (revision 1)

  24 GB Ram

  NVIDIA 470 - MSI twin Frozr cooling solution.

  Restore off, windows search indexing

  Followed advice from the forum and Viper about optimization system

  3 hard drives

  System on standard Sata 2 drive

  The capture of SSD drive from OCZ Vertex 3 120 g (beautiful piece of gear) of the project currently running on the Sata 3 controller

  Pagefile on another hard drive

  Uninstalled Norton 360

  Anything else I could find uninstalled or disabled.

  Firmware and latest drivers for USB of the Station pilot as recommended by Blackmagic.

  Capture of the very successful things less than 55 minutes, but I have things any longer I would like to capture at once.

  I used process Explorer to watch what is happening.  Nothing special that I can identify in terms of process, but cpu seems to be 100%.

  With the progressive settings problems remain the same.

  I'm not aware of any limit of size of file with Premiere Pro or Blackmagic - is there some?

  Whereas reinstall but would be grateful to all points of view.  My first post so I hope that I have provided good info to help me help you.

  Thank you

  Andrew

  As happens with the BM software as body, I will GUESS that the problem is with the pilot BM device that links software appliance

  I would check to see if they have a difficulty with BM

• First Pro CS5.5 error, no file format supported

  Hello

  I have been using first Pro CS5.5 for over a month now and have created a certain projects, all of a sudden I can't reopen an exciting project, I get the error messafe "file format not supported", then when it opens the entire timeline is there with t e files except the photo/video is not visible, the only thing that happened is I tried to put the folder the file is located in in my drive hard but has not have enough space, so left it on my desk, but in a different folder, then when I went to open it again once I put the file back on the desktop so it would take the same path that I crested when he

  I hope that makes sense, I'm not good with all the technical stuff, is there a quick fix for this? I hope so

  Thank you

  Kathryn

  I tried to do what you say, but he always says the media are online, I can create new projects and use the same files that I used in my initial project, but it won't allow me to open the project original, very frustrating, any other ideas?

  Kathryn,

  Can clarify you this? Did you mean that import the project into a new still shows as offlinemedia? In addition, you say that the same media files work fine in another project, but have not all original projects? Just try to understand clearly the rub...

  Try this: in one of your projects, showing that the media are offline, make a right click on one of the elements of offline in the project Panel, and select "Link media." In the dialog box that appears, locate the file that is requested; the checkbox "display only exact matches name" could help crop choices of file. Double-click this clip; Premiere Pro must create a link to the file at this point. If it works, you can select all of your offline items (or the tray containing them) and use the same process. If all of your clips are in the same relative location, you must have locate the first file, and then the rest will connect automatically.

  Looks like when you the media/project moved and reopened, you cooked in the offline state. This should help you (theoretically) back to speed.

• Problem with the creation of a framework implemented in first Pro CS5 masks

  I'm having a problem with creating masks of an exported framework generated from first Pro CS5. I export the image that is 720 x 480. I open the image in Photoshop and check that there is still 720 x 480, change it to create my mask and important in Premier Pro to find the frame is therefore more 720 x 480. To see if the problem is with Photoshop I tried to export a picture and immediately re - import the back always first.  Of course, he has apparently changed aspect because it shows with vertical black bars on either side in the source viewer and actually overlaps the clip original/image as an image horizontally narrowed as part of the program sequence. No idea what I'm doing wrong?

  I am assuming that you are working with a DV footage in a DV sequence; This video format uses non-square pixels, but the images have square pixels. Probably, the pixel aspect ratio (PAR) of the imported image is not be interpreted correctly.

  Right-click on your any graph, and then select Edit > interpret footage. Check that the format of the pixels in the image is set; If this isn't D1/DV NTSC (. 9091), click on the option button "Conform" and choose that BY the menu drop down.

• Audio does not synchronize with the video in first Pro CS5.

  I recently did a minute 50 video in Shadowplay in format mp4 1080 p and 60 fps. When I look at the video using the default player on my Windows 10 computer application, the audio and video sync very well. However, when I add in first Pro CS5 is no longer syncs. I tried to use a custom preset but who has not yet worked.

  Playback is nervous as well?  First CS5 is older than 5 years and you can be on the 32-bit version?    Also be sure to what ShadowPlay produces a constant frame rate export.   First dislikes images of frame variable rate but which usually manifests as not be able to play all the.

  Try to run your file through Handbrake and set it to constant framerate and try again first.  Is not guaranteed to solve the problem, but removes a suspect.

• First Pro CS5.5 installation problems

  I am a newbie to Apple systems and therefore has no chance first Pro CS5.5 installation to my new iMac desktop PC.

  I have correctly installed and used this program on my system Win7 very familiar, but move to OX10 and Apple has proved more

  that my non-technical brain can handle.  I can't find anything specifically labelled Install.app by clicking on some files with

  'Install' on the label, a box pops up saying "there is no set application to open the document.  So I would be able to work on my images,

  and I'd appreciate any help you amazing, knowledgeable, people can provide!  Thank you!

  Have you tried some documents for OSX beginners on the web?

  http://www.YouTube.com/watch?v=8gkvAt1FYps

  http://guides.MacRumors.com/Installing_Applications_in_Mac_OS_X

• Windows PC upgrade to 10. Try to install the first Pro CS5. Does not work.

  Windows PC upgrade to 10. Try to install the first Pro CS5. Does not work.

  Download the following messages: Exit Code: 7 please see the faults and warnings below for troubleshooting. For example, ERROR: DW050... WARNING: DW036, DW066...

  -0 fatal Error (s), 82 (s), 124 warning (s)

  Any idea?

  Thank you

  Jaap

  Do you have other Adobe applications installed on your computer?

  Navigate to C: > Program Files > Adobe.

  Open the Adobe folder and check if the Adobe Premiere pro CS5 folder is created with files stay inside?

  Let us know.

  As System File Checker run command once and see if \any system files are corrupt. As you had upgraded to Windows 10 we will check the system files once. Later we can try to provide full permissions for the required records.

  https://support.Microsoft.com/en-in/KB/929833

• I think I need to re install off my disks again. When I ask first Pro CS5 to send my project to again, still opens but did not receive my film sequence. How can I re install again only without upsetting my film?

  Hello. I have following first Pro CS5 on Windows. Can you advise me how do to re install again off my records without affecting any of my Premier Pro film please?

  I ask Pro send the sequence of film through dynamic links in again so that I can burn the movie to a disc.

  Still doesn't open, but the sequence did not arrive to Pro.

  Last night the sequence came in again but took forever to transcribe, and I finally canceled the process as it appeared to get stuck and have not completely to writing on the disc.

  This morning the sequence are not yet in still.

  Very frustrating when I have a 4 hour movie I want to write to Bluray so I created now 4 separate sequences and try burning them to DVD in the chapters of 1 h.

  Hope someone can help me with this. See you soon. Janice

  Reinstall still will not affect your movies.

  But I would like to make send to still and do the transcoding in the first use of the Media Encoder.

  Use the Bluray H.264 preset for BluRay. For DVD use mpeg2 dvd preset and fields is higher.

  In particular, I would make for DVD transcoding with first as in CS5 will still reverse fields.

• First Pro CS5.5 quit unexpectedly. Mac 10.10.2.

  Hey there,

  My Mac has just started popping up with the box of 'first Pro CS5.5 close unexpectedly.  Nothing has been done differently and the program works for years.  Any help?

  My Mac is a 17 2011 "and currently has OSX Yosemite 10.10.2.

  

  Problem solved.

  I couldn't find the Colorista file for some reason any. I looked at red giant through Finder (the company that manufactures the Colorista) and there was an application uninstall program they provide. In this App Uninstaller was able to uninstall the Application Colorista. After uninstalling, everything works fine.  Thanks for the help guys!

• Just installed first Pro CS5, impossible to perform, error code: 1

  Hello. Just installed first Pro CS5 for the first time, but can't run it. I get the following error code:

  Uninstall and reinstall the product.

  If the problem persists, contact Adobe Technical Support for assistance in specifying the error code that appears at the bottom of this screen.

  Error: 1.

  http://www.Adobe.com/FR/support

  ()http://puu.sh/2jN4T/6164d5b656( )

  With the help of Windows 8.

  Thank you for any input!

  Dryaan if you're still having trouble with your setting file permissions, so I recommend to communicate directly with our support team.  For the best support, I recommend our chat support at http://adobe.ly/yxj0t6.  Our chat representatives can provide a personalized experience to solve the problem you described.

• How to export a lower third animation in first Pro CS5?

  I bought a lower third animation that can opened using After Effects. What I want to do, is to create different lower-thirds with different names (transparent background) and make everyone as a quicktime file to be able to just put in my first pro film when I need to be shown. The question is: how export animated lower-thirds After Effects in first Pro CS5 with a transparent background, it will show just the slightest third animation. Any response would be appreciated.

  Thank you!

  You must make the file with an alpha channel. You want to set up rendering as Millions of colors + Alpha, Alpha right and then use a codec that supports alpha channels. Depending on your system, this can be ProRez 444 QuickTime Animation, or a png sequence.

  Press F1, go to the help files and read the section on render and output.

• First Pro CS5.5 titreur crashing on start up

  I have a recent issue with the titration module. First Pro CS5.5 Titler crashes constantly when opened. I can not open past projects which includes the titration module or have titles in it. Last night I was finishing a project (of course) who has titles in it. This morning when I tried to open the project, I got the BLUE SCREEN of death. I restarted and was able to open the first pro cs5.5, but it does not display the recent previous projects. It was as if everything got zero including my preferences. I tried to open my project that has titles in first pro cs5.5 accidents and she immediately. I then try just open a blank project and all is well. While in this empty project, open the titration module causes an immediate crash.

  Now, I still have first pro cs5 on the computer so I'll and open an empty project in cs5 and everything's fine. I try to open the module of titration in cs5 and everything's fine. I try to open in my project with securities and well-functioning cs5.5 cs5. It opens and works as it should.  But of course, it's a real pain because my cs5.5 after effects sequences are not backward compatible. I reinstalled first pro cs5.5 and tried everything again (above), but met with the same results. I have the latest version of windows and Quadro 3800 NVIDIA updates. I've been editing on this system for almost a year with cs5 and 3 months with cs5.5 (production premium)

  Specifications of the computer:

  Office high i7 2.8 gHz

  Qudro 3800 with last orders

  Professional drivers latest window 7

  24 GB ram

  7terabites of hard disk space.

  .

  Thanks to Bill Hunt and his article and tread on the corrupted fonts, I was able to find a solution. In fact, it wasn't a police problem, it was one obscured 5.5. file that was bad. Bill that included in his thread. File: 'workingset.prsl' found in the mydocuments/adobe/premierepro/5.5/styles folder.

  I first moved the file out of the folder and first pro 5.5 module titration. He started very well without any problems. I was able to open my previous projects which involved that I wasn't able to open before the titration module. Regenerates the file in the folder styles. I can remove the old file prsl.

• First Pro CS5.5 never started place... error message each time. Help please?

  Hello...
  
  I recently bought the suite Production Premium CS5.5.
  
  Most of the work programmes. (I have not tried ALL the.) But the main - CS5.1 Photoshop and After Effects - work perfectly).
  
  But first Pro CS5.5.0 does not open. Keeps giving me the good old error message: "Adobe first Pro CS5.5 has stopped working". What happens whenever I try to open it. And it is never past the opening screen. He is MIGHTY frustrating. And there seems to be no coherent advice in this field all over the Adobe Forums. Maybe I've not spotted.
  
  I run a Fujitsu Lifebook T901, using Win 7 64 bit Version Service Pack 1 Build 7601 6.1.7601
  
  Processor Intel (r) Core i7 - 2620M 2.70 GHz, 2701 MHz, 2 Lossnay, 4 logical processors
  
  Version of the FUJITSU BIOS/Date / / Phoenix Technologies Ltd Version 1.04, 17/02/2011
  
  8 GB of RAM.
  
  Please guys... what should I do?
  
  Operating system: Windows 7
  Printer model / version of the driver: Intel HD Graphics Family
  Video display card / driver version: 8.15.10.2246
  He has already worked? If so, what has changed? (provide comments in the description field): No.
  Same results with different files? : not Applicable
  Same results with different computer? : not Applicable
  Change recent system hardware or software? : no

  Alan is correct.

  Here is an overview of the system requirements:

  http://www.video2brain.com/en/videos-5351.htm

• Desktop (first Pro CS5) mode

  I recently had a project who did close and the first time I installed Adobe first Pro CS5, everything worked perfectly. Until recently, I had to reinstall the software, and all of a sudden, there are available in "Desktop Mode". All video files I used now, say "Media disconnected." I hope there is a solution and I don't have to repeat the entire sequence. How can I get back the original with all the video files sequence work properly?

  It seems that the MPEG CODEC (I believe all are MainConcept) don't have reinstall correctly.

  You can try a repair installation? If there is a problem with of the COCEC MPEG, then that should "fix" things.

  Who could take the only Desktop Mode issue too. Something was not installing correctly.

  Good luck

  Hunt

• First Pro CS5 never uses more than 15% of CPU, so perform much more slowly than first 6.5!

  Hello.

  I make videos of marriage for a while. My material included map DV500DVD and first 6.5 CPU Core 2 Duo E8400, 2 GB of RAM, Windows XP SP1 (DV500 does not work with SP2 or SP3).

  The above system is quite old and absolutely not usable for HD videos. So, I decided to build another machine. The configuration is the following:

  OS: Windows 7 Professional 64 bit.

  M/b: Asus LGA 1155, H67 chipset.

  CPU: Intel Core i7 - 2600K

  RAM: 4 GB DDR3

  HARD drive: 2 x 64 GB SSD, 2 TB SATA (RAID) 4 x (all drives connected to separate the controller PCI-E chipset fault intel isn't a problem here)

  I recently downloaded and installed the first Pro CS5 trial version, to see how he adapts to my needs. And I'm very disappointed. I started the first, chosen preset widescreen DV, inserted two static images on the timeline and made a mix alpha between them. Then put movie export. Not only it took too long to make, but it only used a nucleus, and the CPU usage is only 15%. Just out of curiosity, I installed first 6.5 on the same system, and he did this task about 10 times faster!

  That is, limitation of the trial version, or just first Pro CS5 cannot be used with this modern processor?

  Thanks in advance,

  Alex

  I can understand your experience... After I installed Windows 7 and CS5 Production Premium, adding another 8 Gig of Ram for my PC, dying on the fact that my Nvidia Quadro FX 4600 is not able to use the reading mercury and literally hours of waiting for spending returns, on a hunch, and after reading about someone else who did the same thing.  Finally, I took my old PP CS3 and installed on alongside first CS5. To my surprise, with 64-bit OS, CS3 running and makes exactly the same content about 4 times faster, does not idiosyncratic seizures slow when moving clips in the timeline, no white on the error screen "not responding" messages, etc.etc. I have no problem with After Effects or Photoshop CS5, they work fine, but first CS5 is close not functional as it gets. A: 30 minutes with some effects of magic bullet, even native capture HDV format takes about 10 minutes with PPCS3... and about 45 minutes with CS5. CS3 also reads smoother and barely stutters, so that I have to sit and to return with CS5 because of choking in order to continue working. One post suggested that I don't have enough gas in the machine, dual core AMD Opterons 3.2 GHZ, disks, 16 Gig ram working 7200 and 10 000 rpm... but cannot see how CS5 can maybe make CS3 on the same stage. What I'm missing here? I'm not whining just baffled.