First router users Questions
It's my all first time owning and you use a router, so I have a few questions that I would ask.
1. my router connects (with flashing lights) constantly, or should it be unplugged when not in use? (By fear it overheats).
2. If I stay connected to a wireless port of my router at all times (on any given computer), he eats my bandwidth even if I'm not surfing the internet?
Thank you if you answer these questions a little silly. XD
For a first time router owner questions are quite normal. You can't cut anything and the security post is a good tip. If your main concern is the bandwidth, you don' t want your neighbors it devours. Insofar as your LAN or LAN you can leave that as well without any problem of bandwidth. (Although with wireless operate in some connectivity issues) Try not to confuse LAN with WAN. LAN = network, WAN is you ISP a.k.a your bandwidth. Finally your WEP key (which is what I assume you enter whenever you sign out) you can leave in and click 'Disconnect' or you enter it each time
Tags: Linksys Routers
Similar Questions
-
can trial Photoshop CS6 - I access it as a first time user?
I downloaded the Photoshop CS6 trial on my iMac as a first time user, knowing that my serial number for CS1 was outdated (I am retired and have not used Photoshop for years). But I can't activate it. It is not available for novice users and if not, how can I safely uninstall? I really want to try before you buy the full version and did not know that I need a serial number to install.
You don't need a serial number for trielas. If it has expired, something was wrong.
Adobe trial software has expired at the beginning
Uninstall using the uninstall program supplied with the program.
Mylenium
-
First time user VMware - perhaps a silly question re: server hardware
Thus,.
I started using VMware a couple of days for the tests. I have a client who has VMware ESX Server 3i installed they have a HP Server and I have a Dell Server I installed the same version of VMware ESXi.
If I download their images run on Dell Server? Or is it that there is a problem?
Rgds
Chris
PS - Sorry if this is a silly question
Chris,
That's what VMware call the independence of the material. http://www.VMware.com/virtualization/virtual-machine.html#c25953
Basically, your VM has no knowledge of what is running on the hardware - so feel free to move to Dell for HP hardware and back.
However - vMotion, the displacement of an engine on the virtual machine from one server to another server requires similar processors on both hosts.
I hope this helps.
-
Configuring router user name and password for Linksys WRT120N router?
Im trying to forward my ports for games, but I can't access my router. I put the usernam admin and leave the password empty vice versa and user name password and username password vice versa. This is a new router and this is my first time trying to access.
Thank you
Well, it was an old password for quite awhile ago. I didn't know that he will use an old previous routers. ??? Weird. Well, I want to change the password and the user. where should I do all here?
-
First HP: 'User Guide' or ' Phase User Guide 2 "?
The first link the HP documentation online is
What is the difference between the 'user's Guide' and the ' User Guide Phase 2 "? Which should I use, or do I have both? If the guide phase 2 is just one update on the other, why list both? I recommend you put useful text on the page of guidance on this. Thank you.
Phase 2 is a newer, updated version to date. However, please note that NONE of these are as complete as the Guide provided with the newest premium emulator. Install the emulator most recent, then click on help / User Guide and you will get a PDF document including the first 616 PDF pages are the same document Phase 2 above, but then it is followed by more than 334 pages called "User Guide supplement" containing brand new information about the last update. It is the document that you want, not the ones on the page web link above.
Just in case... Here is a link to the latest emulator ("virtual Calculator"): ftp://ftp.hp.com/pub/calculators/Prime
Hope that helps!
DISCLAIMER: I do not work for HP. I'm a happy user of HP Calculator.
-
Hello, I really ned a quick response... :/
So I created a second user yestarday, so I had them 2, after some time I switched user and then turned my pc of. Later when I went to loggn in my user to fir trees, I couldn't, because it was just possible to loggn into second account... it does not show that there first user, I had...
The second user that I created was a Director? would it be posible that my first user is deleted somehow? :((
I don't know what's heppening, but I really need the other user, because its so much important things for me! :(
But I still do not see him... It's like gone...:(quand j'ai voulu loggin àle premier utilisateur, il ne m'a donné choix trop choisi premier utilisateur ou en second lieu, c'est juste me demanda pasword à deuxième utilisateur j'ai créé:(()
Please help me, I need a lot of treatment
If I read your post correctly, I guess the account you were using was the original administrator account which can be renamed. When you create a 2nd account, it is normal that Windows hide the original at this point administrator account. Rename the user administrator does not rename the profile, so you will probably find your files in 'Administrator' in the folder c:\documents and settings\. This may be the reason why your account is hidden.
If this is the case, to log in to your original account, when you get to the opening of session "Welcome" with only the 2nd account, press Ctrl-Alt-Del twice. This should bring up a login screen 'classic '. Try typing your user name and password in the boxes and see if you can connect.
If you can connect and want two accounts to display, you need to create another profile and transfer your files/data in this additional profile and leave the original hidden administrator account. To do this, pretend that your hidden account profile is corrupt and follow one of the following procedures:
"How to recover damaged Windows XP user profile"
<>http://support.Microsoft.com/kb/555473 >"How to copy data from a corrupted to a new profile in Windows XP user profile"
<>http://support.Microsoft.com/kb/811151 >HTH,
JW -
EA4500 and OJ8600 of HP printer router interface questions all in one.
Hello I am running IE11, WIN8.1, 1 TB HD, 12 GB of memory with EA4500 router from Linksys connected to the computer via an Ethernet cable. The computer is a Lenovo desktop (K430). I ran a test installation of HP troubleshooting on the interface between the computer and EA4500. I opened my Linksys Smart Wi - FI to perform the following two tasks. The HP Installation troubleshoot suggested I should put MAC address filtering to off I did without any problems. Installation troubleshooting HP also suggested I have find the MAC address of my printer and add it to my list of devices that are allowed to access my networh. How can I do this? Thank you.
You should make a print from the printer setup page and who should detail you information on MAC and IP addressing. I recommend not to use Mac filtering because it is not necessary. I recommend that you configure a static IP address ON the printer, 192.168.1.86, that should be the default value of routers outside main pool DHCP de.100 thru.199. You will need to refer with the Lim and information on how to establish networks and set up the printer. Consult the user manual as well.
-
I lost my router user name and the password and reset does not have without the router
I haven't used my router wireless of Linksys WRT54G v5 for about 1 1/2 years and he needs now to a new place.
I put a username and password I forgot for a long time for access to the web according to the security protocols for the modem and I lost the disc for the program control protocol.
I tried pressing the reset button to clear the modem and it took the WPA Protocol off the power to the modem, so I can use it without any security, but this isn't a good thing.
Help! How do unlock it so I can get to the security protocols and put back the security on my modem?
StephanieD wrote:
I haven't used my router wireless of Linksys WRT54G v5 for about 1 1/2 years and he needs now to a new place.
I put a username and password I forgot for a long time for access to the web according to the security protocols for the modem and I lost the disc for the program control protocol.
I tried pressing the reset button to clear the modem and it took the WPA Protocol off the power to the modem, so I can use it without any security, but this isn't a good thing.
Help! How do unlock it so I can get to the security protocols and put back the security on my modem?
To release your router to your previous settings.
RESET the router the button is @ the back of it.
Connect a computer to one of the ports numbered on the router.
Access the UI of it http://192.168.1.1
User name: (BLANK)
Password: admin (all lower case)
-
Win 7 crashing a lot during (online) video streaming for a while now > cannot read properties of Mem (RAM) in ' computer > Properties / group policy fails > can not change the type of user account
HM-built PC:
F2a - 84 M Asus MB
Win 7 Home Premium
ACPI x 64-bit
AMD A4 - 5300 APU x 2
16 GB of RAM DDR3 1333 MHz (4x4Go Patriot PSD38G1333KH)
Graphic OB (Radeon HD Graphics (7480D)
Internet:
DSL ATT Uverse (6dwn/1up) Mbps
Browsers:
Chrome or Firefox (current)
Security:
OS = MS Security Essentials (Virus Defs = current)
PC = MalwareBytes Anti-Malware
Browser = MalwareBytes anti-Exploit
General = system starts and works well, most of the time, but crashes at random, usually in streaming video, but other times, as well
Win Update = Error Msg: "impossible to verify updates because no service not running - restart (does not help)." However, the VICTORY seems to automatically update very well (he just did this week).
PC freezes = while watching NetFlix, other software streaming services (IE FXCM trading station)
Indexing = sometimes, computer is very slow to scan (index?) drive / content folder
Other = I do not know how to read the error or the event logs, the and al., so does not (see below). DSL ATT Uverse Speedtest / test line out above marks paid for. I don't know what "MS fix utility" to try (IE test of memory). C: drive is 3 GB to 500 GB full so cannot move to WIN 10 (maybe it is?) I'm lost...
What else I can share to help?
-Thanks, MC
Hello
Thanks for posting your question on the Microsoft community.
Thank you for details on the issue.
Windows may freeze if multiple programs are running at the same time or if Windows is infected by a virus or malware.
I suggest you to execute the resolution of performance issues and check if that helps.
Reference:
Open the troubleshooter of Performance
http://Windows.Microsoft.com/en-us/Windows7/open-the-performance-TroubleshooterIt checks issues that could slow down the performance of your computer, such as how many users is currently connected to the computer and if multiple programs are running at the same time.
Please also run Microsoft safety scanner to check and remove any viruses or malware that may cause the problem.
Reference:
Microsoft safety scanner
http://www.Microsoft.com/security/scanner/en-us/default.aspxNote: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
I hope this information helps.
Please let us know if you need more help.
Thank you
-
First three steps Questions with RV180
I recently bought the router RV180. I have a few quick "getting started" questions about its use:
1. is the "static DHCP" screen I need to use in order to reserve addresses DHCP (see attachment)? That's where I was reserving all my DHCP addresses with. I'm just that I have the correct screen.
2. what I have to do something for my setup of "backup", or my settings will always be around every restart of the RV180?
3. I have to run a check on the RV180 firmware update and how can I update the firmware on the RV180 (as well as the SG200-18), or it usually comes with the latest out-of-the-box firmware? If I get ahead and put a contract on the RV180 and the SG200-18 service, will I automatically receive my updates? Are numbers of reference for service contracts the same for the RV180 and the SG200-18?
Thank you!
Hello
1. is the "static DHCP" screen I need to use in order to reserve addresses DHCP (see attachment)? That's where I was reserving all my DHCP addresses with. I'm just that I have the correct screen.
Yes, this is the right place to set DHCP reservations.
2. what I have to do something for my setup of "backup", or my settings will always be around every restart of the RV180?
Whenever you click on save after completing a change you configuration is saved and will survive a reboot.
If you want to save the backup copy of your file from your Setup simply go in Administration > backup/restore settings.
3. I have to run a check on the RV180 firmware update and how can I update the firmware on the RV180 (as well as the SG200-18), or it usually comes with the latest out-of-the-box firmware? If I get ahead and put a contract on the RV180 and the SG200-18 service, will I automatically receive my updates? Are numbers of reference for service contracts the same for the RV180 and the SG200-18?
You must manually update the firmware of the RV180. This firmware is available here:
It is simply a file, you download under Administration > Firmware Upgrade. There is no bootcode for routers (as if he was with the switch)
You can find this in the future in the same way you SG200 firmware (because this link may change) on Cisco's Web site.
Regarding the service contract, the part number for two of these machines will be CON-SBS-SVC2.
Hope that helps and I will try to get to your other questions sometimes today as well. Also since you have purchased you are of course welcome to call and get support by phone, your two devices come with 1 year of technical support, and it looks like you have found or contracts, so I guess that make only 3 years.
Cisco Small Business Support Center phone numbers
Thanks again for choosing Cisco,
Christopher Ebert - Advanced Network Support Engineer
Cisco Small Business Support Center
* Please note the useful messages *.
-
Based on the IOS VPN Lan-to-Lan (NAT and route map Questions)
Hello world
I worked on my review of CCNA security and I have a question about this stage
LAN1 192.168.0.0/24---(routeur HQ)--10.10.10.0/30--(INTERNET)--20.20.20.0/30--(routeur Branch) - LAN2 192.168.1.0/24
I use 10.10.10.0/30 and 20.20.20.0/30 networks assuming that these are public addresses (is just a laboratory).
I read that if I want to make the VPN tunnel while I using NAT I must exclude valuable traffic from the NAT process so I look on the database of cisco for more help and I found this (look at the 3660 router configuration):
http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a008045a2d2.shtml#T1
so, I applied this config for my routers, so the config is:
IP nat inside source map route sheep interface fastEthernet0/1
access list 110 deny ip 192.168.0.0. 0.0.0.255 192.168.1.0 0.0.0.255
access list 119 permit ip 192.168.0.0. 0.0.0.255 any
sheep allowed 10 route map
corresponds to the IP 110
I didn't really understand who is using the command route-map here, so I made this configuration:
IP nat inside list sheep interface FastEthernet0/1
sheep extended IP access list
deny ip 192.168.0.0 0.0.0.255 192.168.1.0 0.0.0.255
Licensing ip 192.168.0.0 0.0.0.255 any
Two of them worked I could translate my LAN addresses to the public to address internet and also could establish the VPN tunnel. So my questions are:
1. What is the purpose of the road-map command?
2. What is the difference between these two configuration?
3. which one I should use and in what cases?
Thanks in advance
Jose
Jose,
Very good questions and in fact no need to the road map it.
Personally, I like using course maps because it allows much more flexibility than simply ACL setup, but in order to bypass the NAT source IPs, there is no need of route-maps and you can do this with the ACL directly.
I personally always use road-maps just because I can (route-maps are cool) haha
Route-maps are very useful in other scenarios where you need to put more of conditions or factors.
Remember that it is almost always more than one method to accomplish a task... which is one of those cases.
It will be useful.
Federico.
-
Failed to open a session for the first time user. Already put in wifi before logon.
Hello
I have a problem on windows 7 wifi before logon. Am currently using windows 7 Enterprise, whenever I boot up to windows on the bottom screen there is a status wifi say "windows tries to connect wifi (my wifi profile). While I am able to connect to my school network.
When the new user try to connect it is able to identify and prepare the new Office BUT when 2nd user login or 3rd I'm having a problem. Windows will not be able to connect and it showed the error "'no connection servers available at the service ofthe logon" "
Know any solution for that?
Rgds,
DanHi Dan,.
Thanks for posting in the Microsoft Community.
However, the question you posted would be better suited in the TechNet Forums; We recommend that you post your question in the TechNet Forums to get help:
TechNet: http://social.technet.microsoft.com/Forums/en-US/smallbusinessserver/threads
If you need Windows guru, do not hesitate to post your questions and we will be happy to help you.
-
I have a Dell laptops 5520 during the first boot, I created an Admin account and set the timezone, etc. Then I joined laptops to our AD domain, software installed, such as Microsoft Office 2010 and Adobe. Laptops have worked for a few weeks and now containing several profiles of my domain users. All of a sudden, some laptops from start-up to the original Admin Login (the first user created). When I connect, the NetBIOS shows is more that the laptop is part of a domain, and none of the applications that are installed are listed in all programs more (programs and profiles of school boards, however, still exist on the hard disk). I have system restore disabled by GPO, and I limit the applications of the Panel as well. I contacted Dell and they have never heard of this issue. If I join the laptop to the field, he finds the original computer account but this does not all installed software and profiles will reappear. Here is Windows 7 Professional on a Windows 2008 domain. Any ideas?
Hello
The Microsoft Answers community focuses on the context of use. Please reach out to the business community of COMPUTING in the TechNet forum below:
http://social.technet.Microsoft.com/forums/en/category/w7itpro/
-
VPN between ASA and cisco router [phase2 question]
Hi all
I have a problem with IPSEC VPN between ASA and cisco router
I think that there is a problem in the phase 2
Can you please guide me where could be the problem.
I suspect questions ACL on the router, but I cannot fix. ACL on the router is specified belowLooking forward for your help
Phase 1 is like that
Cisco_router #sh crypto isakmp his
IPv4 Crypto ISAKMP Security Association
status of DST CBC State conn-id slot
78.x.x.41 87.x.x.4 QM_IDLE 2006 0 ACTIVEand ASA
ASA # sh crypto isakmp his
ITS enabled: 1
Generate a new key SA: 0 (a tunnel report Active 1 and 1 to generate a new key during the generate a new key)
Total SA IKE: 11 peer IKE: 78.x.x.41
Type: L2L role: initiator
Generate a new key: no State: MM_ACTIVEPhase 2 on SAA
ASA # sh crypto ipsec his
Interface: Outside
Tag crypto map: Outside_map, seq num: 20, local addr: 87.x.x.4Outside_cryptomap_20 ip 172.19.209.0 access list allow 255.255.255.0 172.
19.194.0 255.255.255.0
local ident (addr, mask, prot, port): (172.19.209.0/255.255.255.0/0/0)
Remote ident (addr, mask, prot, port): (172.19.194.0/255.255.255.0/0/0)
current_peer: 78.x.x.41#pkts program: 8813, #pkts encrypt: 8813, #pkts digest: 8813
#pkts decaps: 0, #pkts decrypt: 0, #pkts check: 0
compressed #pkts: 0, unzipped #pkts: 0
#pkts uncompressed: 8813, model of #pkts failed: 0, #pkts Dang failed: 0
#send errors: 0, #recv errors: 0local crypto endpt. : 87.x.x.4, remote Start crypto. : 78.x.x.41
Path mtu 1500, fresh ipsec generals 58, media, mtu 1500
current outbound SPI: C96393ABSAS of the esp on arrival:
SPI: 0x3E9D820B (1050509835)
transform: esp-3des esp-md5-hmac no
running parameters = {L2L, Tunnel}
slot: 0, id_conn: 7, crypto-card: Outside_map
calendar of his: service life remaining (KB/s) key: (4275000/3025)
Size IV: 8 bytes
support for replay detection: Y
outgoing esp sas:
SPI: 0xC96393AB (3378746283)
transform: esp-3des esp-md5-hmac no
running parameters = {L2L, Tunnel}
slot: 0, id_conn: 7, crypto-card: Outside_map
calendar of his: service life remaining (KB/s) key: (4274994/3023)
Size IV: 8 bytes
support for replay detection: YPhase 2 on cisco router
protégé of the vrf: (none)
local ident (addr, mask, prot, port): (172.19.209.0/255.255.255.0/0/0)
Remote ident (addr, mask, prot, port): (172.19.194.0/255.255.255.0/0/0)
current_peer 87.x.x.4 port 500
LICENCE, flags is {origin_is_acl},
#pkts program: encrypt 0, #pkts: 0, #pkts digest: 0
#pkts decaps: 0, #pkts decrypt: 0, #pkts check: 0
compressed #pkts: 0, unzipped #pkts: 0
#pkts uncompressed: 0, #pkts compr. has failed: 0
#pkts not unpacked: 0, #pkts decompress failed: 0
Errors #send 0, #recv 0 errorslocal crypto endpt. : 78.x.x.41, remote Start crypto. : 87.x.x.4
Path mtu 1452, ip mtu 1452, ip mtu BID Dialer0
current outbound SPI: 0x0 (0)SAS of the esp on arrival:
the arrival ah sas:
SAS of the CFP on arrival:
outgoing esp sas:
outgoing ah sas:
outgoing CFP sas:
protégé of the vrf: (none)
local ident (addr, mask, prot, port): (172.19.194.0/255.255.255.0/0/0)
Remote ident (addr, mask, prot, port): (172.19.209.0/255.255.255.0/0/0)
current_peer 87.x.x.4 port 500
LICENCE, flags is {origin_is_acl},
#pkts program: encrypt 0, #pkts: 0, #pkts digest: 0
#pkts decaps: 8947, #pkts decrypt: 8947, #pkts check: 8947
compressed #pkts: 0, unzipped #pkts: 0
#pkts uncompressed: 0, #pkts compr. has failed: 0
#pkts not unpacked: 0, #pkts decompress failed: 0
Errors #send 0, #recv 0 errorslocal crypto endpt. : 78.x.x.41, remote Start crypto. : 87.x.x.4
Path mtu 1452, ip mtu 1452, ip mtu BID Dialer0
current outbound SPI: 0x3E9D820B (1050509835)SAS of the esp on arrival:
SPI: 0xC96393AB (3378746283)
transform: esp-3des esp-md5-hmac.
running parameters = {Tunnel}
Conn ID: 29, flow_id: Motorola SEC 1.0:29, card crypto: mycryptomap
calendar of his: service life remaining (k/s) key: (4393981/1196)
Size IV: 8 bytes
support for replay detection: Y
Status: ACTIVEthe arrival ah sas:
SAS of the CFP on arrival:
outgoing esp sas:
SPI: 0x3E9D820B (1050509835)
transform: esp-3des esp-md5-hmac.
running parameters = {Tunnel}
Conn ID: 30, flow_id: Motorola SEC 1.0:30, card crypto: mycryptomap
calendar of his: service life remaining (k/s) key: (4394007/1196)
Size IV: 8 bytes
support for replay detection: Y
Status: ACTIVEoutgoing ah sas:
outgoing CFP sas:
VPN configuration is less in cisco router
access-list 101 permit ip 172.19.194.0 0.0.0.255 172.19.206.0 0.0.0.255 connect
access-list 101 permit ip 172.19.206.0 0.0.0.255 172.19.194.0 0.0.0.255 connect
access-list 101 permit ip 172.19.194.0 0.0.0.255 172.19.203.0 0.0.0.255 connect
access-list 101 permit ip 172.19.203.0 0.0.0.255 172.19.194.0 0.0.0.255 connect
access-list 101 permit ip 172.19.194.0 0.0.0.255 172.19.209.0 0.0.0.255 connect
access-list 101 permit ip 172.19.209.0 0.0.0.255 172.19.194.0 0.0.0.255 connectaccess-list 105 deny ip 172.19.194.0 0.0.0.255 172.19.206.0 0.0.0.255 connect
access-list 105 deny ip 172.19.206.0 0.0.0.255 172.19.194.0 0.0.0.255 connect
access-list 105 deny ip 172.19.194.0 0.0.0.255 172.19.203.0 0.0.0.255 connect
access-list 105 deny ip 172.19.203.0 0.0.0.255 172.19.194.0 0.0.0.255 connect
access-list 105 deny ip 172.19.194.0 0.0.0.255 172.19.209.0 0.0.0.255 connect
access-list 105 deny ip 172.19.209.0 0.0.0.255 172.19.194.0 0.0.0.255 connectsheep allowed 10 route map
corresponds to the IP 105Crypto ipsec transform-set esp-3des esp-md5-hmac mytransformset
mycryptomap 100 ipsec-isakmp crypto map
the value of 87.x.x.4 peer
Set transform-set mytransformset
match address 101crypto ISAKMP policy 100
BA 3des
md5 hash
preshared authentication
Group 2
ISAKMP crypto key xxx2011 address 87.x.x.4Your permit for 105 ACL statement should be down is changed to match because it is the most general ACL.
You currently have:
Extend the 105 IP access list
5 permit ip 172.19.194.0 0.0.0.255 (18585 matches)
10 deny ip 172.19.194.0 0.0.0.255 172.19.206.0 0.0.0.255 connect
30 deny ip 172.19.194.0 0.0.0.255 172.19.203.0 0.0.0.255 connect
50 deny ip 172.19.194.0 0.0.0.255 172.19.209.0 0.0.0.255 connectIt should be:
Extend the 105 IP access list
10 deny ip 172.19.194.0 0.0.0.255 172.19.206.0 0.0.0.255 connect
30 deny ip 172.19.194.0 0.0.0.255 172.19.203.0 0.0.0.255 connect
50 deny ip 172.19.194.0 0.0.0.255 172.19.209.0 0.0.0.255 connectIP 172.19.194.0 allow 60 0.0.0.255 (18585 matches)
To remove it and add it to the bottom:
105 extended IP access list
not 5
IP 172.19.194.0 allow 60 0.0.0.255 any
Then ' delete ip nat trans. "
and it should work now.
-
Hello!
I am a new user to adobe creative cloud. I'm a Web site manager for pge production broadcast in my school and I use squarespace but I want to upgrade and have more opportunities with my websites. Adobe has tutorials on Java Script, HTML, and CSS?
Not in the way, I think you mean. There are a number of very generous gurus on this forum that will help hard problem solve you your code, and the best way to learn is always, spoil, figure it out and move on to the next thing. :-)
Googling a question will generally help to guide you on the right track and you can always visit W3 Schools or Code Academy for free tutorials or check if there is a Free Code Camp in your area. Sources for tutorials or classes are Lynda.com, Noble of officeand the General Assembly.
Chris
Maybe you are looking for
-
Sierra periodically drops network connection
I installed Sierra last night. For the third time today, I was told that I was not connected to the internet. The first two times I have recycled my modem and returned. This time, before that I did, the system which I would put in sleep after that
-
Invalid response was received from the device
Now that I've updated my iOS 10 6plus my phone will not connect to my macbook pro. I get an error message stated "iTunes only could not connect to iPhone because an invalid response was received from the device. I removed the password and fingerprint
-
HP 17BII: HP unwanted 17BII + sign
HP 17BII added a sign at the end of answer displayed a calculation +. How to NOT add a +?
-
Getting kicked off Xbox live for 10 minutes
For some reason any over the past few days I was expelled out of Xbox live for 10 minutes, what should I do? Original title: Console Moved to Virus & Malware then left the community involvement Center
-
I need to change from Word 2003 to Word 2010 documents located on a flash drive. Not very computer savvy!