First time installation on Satellite L500-1XD was interrupted

I turned on a Satellite L500-1XD for the first time this morning and during the first installation, the current was interrupted. It now takes an age to complete the installation.
Is this normal?

Is there something I can do?

Thank you.
JD

What to say?
One thing is clear here: power failure while the first installation runs is not normal and should not happen.
So, now, how to tell if this is normal or not when it should not happen at all. Do you believe that none of us in the intention just to see how it works?

Anyway, there is no other choice for you except to wait and hope that everything will be fine.
Unlike the pre-installed recovery image is destroyed and you won't be able to install it at all.

Please send some feedback soon.

Tags: Toshiba

Similar Questions

  • Re: Failed to create of the media to restore Satellite L500-1XD

    I have a new Toshiba Satellite L500-1XD. I tried to create the support of recovery twice now and both times he failed on the first two discs with the following error;

    Cannot open the following file.
    E:\Boot\BCD
    (Error Code: F1-02013-00000000)

    I'm using the Toshiba Recovery Media Creator. The operating system is Windows 7 Home Premium 64-bit. I use standard DVD + R 4.7 GB discs.

    Any help would be useful.

    Thank you.

    > I use standard DVD + R 4.7 GB discs.

    I recommend you to use media of high quality like verbatim or Tdk. Voyez_ you, it can cause problems with weak brand, drives.

  • Satellite L500-1XD usually power up

    My Satellite L500-1XD wont power up.
    Power supply failed. Received a replacement power supply, but all that happens when I plug it, that it is in the flashes of light (DC IN) (green) also makes a slight clicking noise.

    No indication of battery or something else ideas? The book says something to do with the heat dispersion system

    Post edited by: craig_inst

    Hello

    You see a BIOS or Toshiba splash screen?
    Nothing is visible on the screen?

    If this isn't the case, I guess that your laptop developed a serious hardware problem and I think that the parts must be checked by an ASP in your country.
    Theoretically, it could be related to memory, processor or motherboard
    So first the RAM modules must be verified, and if the RAM modules are ok, then, the technician should follow with processor and motherboard.

    Welcome them

  • Satellite L500-1XD constantly restarts & display recovery blue screen

    I bought a laptop Toshiba Satellite L500-1XD from an Argos store in August. Shortly after that I got it occasionally rebooted itself and displays blue screen of recovery saying that the laptop has recovered from a hardware failure. It has become more common recently and he often stops, displays the blue screen, reboots and done over and over again.

    I do not have many new programs on the laptop and that you have installed all updates. I deleted programs I have installed with the exception of Microsoft Office.

    Another thing that could be linked so that when the laptop starts, he says the Toshiba Service Station has stopped working and trying to find a solution to the problem.

    I'd appreciate any advice on how I might remedy this

    Thank you in anticipation

    Hi katrina_1,

    This means that the pre-installed Windows version is still installed, right?

    Well, I think that it of difficult to say why it happens it could be a hardware or software malfunction. The two may be possible.
    The reasons of the majority of blue screens are drivers or hardware itself are all properly installed devices in Device Manager or do you see yellow exclamation points?

    In your case, I'll try to reinstall Windows. Maybe it s only a software problem or driver
    Also if you have installed both modules of memory long live, test it with a module only. You can also use Memtest86 or another tool of diagnosis of RAM to test the memory modules RAM for failures.

  • No output HMDI Sound of Satellite L500-1XD

    I have a satellite L500 - 1xd

    I plugged on HDTV & image is great, but have no sound.
    When I checked the user manual it suggested that I go into the Realtek HD Audio Manager and to change the device default to something else, but there is no option that is available to me.

    Am I missing something?

    Read this

    http://APS2.toshiba-tro.de/KB0/TSB9401B00001R01.htm

    This is for Vista but can be applied for Win 7 too

  • Portable satellite L500-1XD stops

    Hello

    I have Toshiba Satellite L500-1XD. last week, a laptop stops completely when charging the battery turns off. I can see battery appears as 100% charged however laptop are not left on without recharge the battery.

    I suspect I need to change the battery but would be good to know if anyone else had this experience with L500-1XD.

    Thank you
    K * ij

    I think that this model of laptop is not new. Purchased laptop already used?

    It is possible that the battery must be exchanged. When you remove it, you will see the Toshiba label with part number. You can use this part number and order a new one.

  • Port of charger broken on Satellite L500-1XD

    Hi my laptop L500-1XD fell about 6 inches on the carpet, he was in charge at the time, and the charger port seems to be cracked which means that the charger will not stay in and it will not load.

    Can you tell me please if it is possible to replace the charger port and if so where I would get it done (and how it is likely to cost)

    Thank you

    As far as I know, this port is soldered on the motherboard. You can try to search it on the net or on eBay (I saw some out there), but in my opinion, that this problem should be solved on the professional way so maybe better solution for you is to contact the nearest Toshiba service provider and ask for help.
    They can disassemble your laptop, check for damage and repair.

    I think that no one here can say how much it will cost. Ask directly.

  • 4th time broken by Satellite L500-1EU

    Hello
    had a bitter history behind me, then let me tell you and you try and tell me that can I now please?

    I sent my L500 in Zagreb on warranty (MOJservis.hr) at the time they concluded that my adapter was defective and so they replaced. In addition, some dead pixels appeared on my screen 1 month after purchase for which they said I did by hitting.

    So the 2nd time that I sent the mixture of colors guaranteed L500 kind and this kind of problems, the battery has been removed in order to restart. MOJservis this time claimed that they could replicate my problem even after 50 tests and that on my Windows 7 instalation they can't run GPU-stress tests. THUS, they did not bother to look more far than returned.

    Then the 3rd time on warranty he was sent because it has no image on the screen when he started. GPU has been fried due to my negligence in cleaning (which was assumed happene each week using compressed air since I can't open to clean it, they ' r words, not mine).
    So they replace my MOA and my HARD drive which was also filled with bad sectors. Before that moment, I noticed a crack im corner of my laptop they claim not to have done.

    As you can expect im angry because they claimed that they stress GPU can't run and he died 1 month later. And if it isn't bad enough that I have to pay for replacement and cleaning.

    And now my microphone does not work on the original Win 7 using MS drivers, or by using real drivers Toshiba Win 7. Applications of MOJservis I send one more time in Zagreb, but then my laptop is to spend more time on the service than in my hands.

    I want to just my money back or a new device, because it is catastrophic. And when I asked it me laughed me at the Cabinet where I bought it (Toshiba Partner: Elipso d.o.o.).

    Thank you for your time.

    Hello

    That's too bad.
    I think you need to either get in touch with an authorized service provider Toshiba who could check this and was able to contact Toshiba or you will have to call Toshiba Call Center Agents to clarify this point.

    Good luck

  • First time installation adobe creative cloud is not complete (Mac)

    Hi, I am trying to install Creative Cloud Desktop applications for the first time in a new macbook air so I connected via web and downloaded the CreativeCloudInstaller.dmg, but at the start of the installation the status bar crashes just in half. The process doesn´t warn me of any error messages or anything. I had to eject the volume several times to cancel the installation and restarted but just doesn´t work.

    Any help would be great.

    Thanks in advance.

    Mac Version of the OS?

    Try the steps below and check it once:

    N ° 1)

    Click on the Finder and search options listed next to icon located Apple in the upper left of the screen and click on the "Go" menu button and select 'utilities '.

    (Applications > Utiliites)

    If any trash Adobe Creative Cloud and Adobe Application Manager utility records.

    Step 2)

    Click on the link below and download Adobe Application Manager and install the same:

    http://download.Adobe.com/pub/Adobe/creativesuite/CC/Mac/ApplicationManager10.0_all.dmg

    Once installation is complete, niche is going disappear, and then open the Application folder and locate the icon to launch Adobe Application manager, double-click it and update.

    Once the update is complete. He shud launch Adobe Creative Cloud app.

  • Lightroom 4.1 installation failure. InstallShield Wizard was interrupted

    Have tried to install Lightroom 4.1 twice now. Towards the end the InstallShield Wizard of Adobe Photoshop Lightroom 4.1 seems to have reported "the wizard was interrupted before Adobe Photoshop Lightroom 4.1 could be completely installed." Your system has not changed. "I have LR 4.0 installed successfully. On Win7 Ultimate. Any ideas please?

    Post edited by: Digital.Geoff. I mentioned earlier the virtual keyboard of Windows but, on reflection, it was a "red herring." If the virtual keyboard /was/ associated with the InstallShield dialog box as it would have appeared /after/ dialog box appears, not before, so it is impossible that who would have interrupted the installation.

    I had installation problems in the past and have now resolved by disabling the anti-virus protection for the duration of the installation procedure (Kaspersky 2012).  Certainly worth a try.  I just installed the latest version of 4.1 on a PC running Windows 7 64 pro.

  • Satellite L500-1XD - why my screen flashes after fashion watches?

    Hello

    After the start from standby mode, the screen is fine for 3 or 4 minutes, and then I notice a fast blink. This becomes worse and worse until I got then to restart the laptop, or put into hibernation and power up again. I tried to gently move the screen to see if the connection is loose, but the screen just keeps blinking like before. The flashing is random, it's like watching the CPU flash light but its my going fullscreen. It seems to happen after the mode 'sleep', it happens every time, but I would say more than 50 percent.

    This happened to someone else? I wonder what I should do next, or the contact person. I've only had the laptop in July!

    Thank you very much in advance for any advice you can offer.
    Anna

    Hello Anna

    Have you noticed this behavior from the first day?
    You know, sometimes some Microsoft updates can have a negative influence on the standard functions. For a few months, I noticed a strange situation on my laptop satellite. After sleep, I get a stupid error and mouse is dead. I don't have it in the past.

    What you can try is to install the new OS by using the HDD recovery procedure and to test the feature with the factory settings. I am sure that with its own OS preinstalled, everything will be OK. If the problem persists perhaps you should contact the closest service Toshiba.

  • Satellite L500-1XD - why the screen jump when running on batteries?

    I recently bought my L500 and it works very well when it is connected to the electric network, but when I running on battery the screen jumps and flickers.
    I was told to look at the BIOS but that seems fine.

    Any ideas?

    Thank you
    Kate

    Jumps and flickers?
    The same happens when you use different power management?

  • Need CD for installations of Satellite L500-245

    Hello, I hope someone can help.

    The computer is my brother and he lost the installation cd and need to reinstall windows and all the features. I hope someone can help us.

    Thank you!

    If you use original OS that you got with your laptop, you can create new preinstalled software recovery DVD Toshiba Recovery Disk Creator.
    You can also try reinstalling the original recovery via HDD recovery option image - http://aps2.toshiba-tro.de/kb0/HTD1303440001R01.htm

    If not you must order on https://backupmedia.toshiba.eu/landing.aspx

  • Satellite L500-1XD does not illuminate

    I have used my laptop for 2 weeks and now when I try to turn it on there is no sign of life other than the power to the front lights when plugged. It is not only a problem of screen - there is no humming noise or anything when I try to turn it on, I just get nothing.

    So far I have tried:

    Power off
    Modification of the power supply and the battery of the same computer of my father.
    Remove all RAM, two sticks one at a time, repeat the cycle of power and trying to turn it on.
    Disconnect the DVD player and lighting.

    None of them worked.

    Someone at - it ideas?

    Hello

    > Removing each of RAM, two sticks one at a time, repeat the cycle of power and trying to turn it on.

    What you might try to power the device using the RAM modules that are used in identical s Dad for laptop.
    In case this is not enough, I guess that some sort of dysfunction of the motherboard could be the reason why the laptop cannot be turned on.

    How to solve this problem?
    I guess you don't have a lot of options; the defective part must be replaced. But I think it's a question of costs

  • Satellite L500-1XD - impossible to find an update for PC monitor

    This TBS advises updates PC health monitor and alert HDD/SDD.

    HDD/SDD alert has a published in the relevant downloads section updated, but I can't find an update for PC monitor.

    Anyone have any bright ideas?

    Otherwise, this seems quite a balanced system.

    > HDD/SDD alert is an update published in the relevant downloads section, but I can't find an update for PC monitor

    If you could not find it on the page of the driver, it means is not yet available. I don't know why you were asked to update it but if PC health monitor works well don't need to update. I don't think that you will find something more in the new version :)

Maybe you are looking for