Fit.VI exponential fits well

Similar Questions

• A MK-8025GAS HARD disk will fit in my M10 Pro Sat?

  I think my laptop satellite PRO M10 HD upgrade but I do not know if the Toshiba 80 GB HD MK-8025GAS fits well inside the laptop. would be any problem of pins or something similar? I did look at other Toshibas not HD and they are not due to external HD case, near the axis side.

  Can any boyd help me?

  The response of the Toshiba storage Division was:
  "For more information about using a 80 GB HARD drive, contact the manufacturer of your laptop."

  Yes really well!

  Hello

  As you probably know hard drives manufactured by Toshiba, you can find in the notebooks of different laptop manufacturers. Toshiba HARD drive producer is not obliged to test the compatibility of products with thousands of laptop models. Regarding that it is OK.

  Back to your question: your laptop model comes with 30, 40 and 60 GB HDD, depending on the hardware configuration. Unfortunately there is no public document on the compatibility of the HARD disk for your model, but it is possible that 80 GB HARD drive will not be recognized correctly by the BIOS. If you wish, you can contact the Service of your country partner and try to pick up a few details.

  Good luck!

• Y510P image does not fit into the second screen using HDMI

  Hi, I have the Y510P with Windos 8.1 latest graphic drivers. I am connect to my HDTV via HDMI and the image fits well in my TV and it has a little zoomed. I was looking for a solution in all the menus of Intel HD 4600, nVIDIA Control Panel, Windows scaling... Nothing works. I have another laptop and it has an option that is changing the image and the TV shows that what is supposed to be for show.

  How can I solve this and did what I see in the screen of my laptop on the second screen (TV)?

  Thank you!

  I have a 1280 x 720 Samsung TV, I don't know the model exactly.

  The probem disappear when you change your screen resolution, or change the size of the elements, or something like that. It has something to do with the Panel of Intel, where there is a scaling option, in the tab 'display '. Well, there should be an option to select the scale, but it is not.

  So, to make it appear, you need to do this:

  1. connect the HDMI

  2 desktop, right-click, screen resolution, in 'View', you must select your TV, in my case "Samsung TV"

  3. you change the resolution from 1080 to 720

  4. then select Samsung TV as output ONLY screen, so the screen of the laptop turns off

  5. go in Control Panel (right click, graphics properties... office, display) Intel

  6. NOW, in the scaling box, you can move the 2 sliders and adjust the image, so now I can make it adapt to the screen

  Although it is a solution, and everything works fine, I don't like. I should be able to look at the screen of my laptop, and the most annoying is that steps 1 to 5 are reset every time you unplug the HDMI. It is a temporary solution.

  I want my nVIDIA GT 755 M to take control of the HDMI, I think that I could just plug the HDMI then automatically shows properly scaling the picture of my TV. Just plug and unplug, like all my other computers.

  Thanks for the help and hope I can find a real solution.

• LaserJet Pro 400 M451dn: Toner HP Laserjet Pro 400 does not fit

  Probably I'm missing a small detail, but after extensive research and contemplate, I decided to ask here.

  I have a LaserJet Pro 400 M451dn, who came into my office with no toner cartridge at all. We ordered the appropriate cartridges, 305 a (checked on the box of the printer and here on the website of HP), three more black color.

  I opened only the yellow and blue, but not appropriate. In the left and right corners close, there is a piece in the tray of the printer which does not allow to slip into the cartridges. Everything seems correct with regard to the location of the electrical contacts, tabs, etc., but no amount of stirring or twist will allow cartridges to fit in the status bar to which they belong.

  I feel a bit stupid if it's something incredibly simple that I'm missing, but I want to know rather than continue to try my own solutions that do not work.

  Any suggestions?

  I don't know there is a way to get it free. I never looked at the model number on the front of the printer, but I have now. It came on the Pro 400 area (where it fit well), then glanced at, very quick inspection, like the one on the box. I worked on the wrong model of printer. It's actually a CP2025 which, of course, uses different toner.
  I'm sorry to bother you. You probably had something valuable to contribute to the world during the past days dedicated to thinking about my mistake.

• How to change the icon of an extra folder in the sidebar?

  I just downloaded Sierra, I have a mac mini and I want to change the icon of a folder that I created, I already changed it, but in the sidebar, there is no icon, so I need help to change to the icon I want.

  If you had already created a folder named & then hung out in the

  Docking station, a change in this file might have to replace one in the Dock; so

  If this is the case, do drag the earlier version of Dock, replace with new.

  Of course, when you drag the icon of the old dock, it will go "poof!"

  {Are you referring to the dock as a 'side bar' on the desktop?}

  Files and web links, etc. can be slid in the side bar (Dock)?

  on the side of the bulkhead the nearest trash. Only applications or utilities

  can be moved to the other side.

  Here is an example of a file with a custom icon to the dock, put in place to

  be considered a list, arranged by name; used to launch additional items that

  otherwise could not fit well on the dock. There are also the Alias of elements:

  

  The alias or the symbiotic relationship that you create in the Dock is always based on the presence

  the original (a custom, etc folder) or on the icon element can become a '? Mark '

  or blank if the original is no longer available. I put the original in my user folder.

  If you already know how to copy a new icon to a folder (else, etc.)

  or make a new graphic icon and paste it into the folder to replace original;

  so if I understand this issue, the rest should be easy.

  Unless you try to accomplish something else...!

• Should I get the new iPod Touch or an iPad Mini 2?

  Hi, I'm tossing up between the new iPod Touch and the iPad Mini 2. I intend the device mainly for playing games and going on social media. I also want to speedy. Thank you!

  Also, I currently have an iPod Touch 5 gen and his microphone does not work. I can not make voice memos, FaceTime, record sound in camera etc. If anyone has any ideas why it does not work, please let me know. I use iOS 9.3.2 and I tried to reset all the settings of the device.

  Problem with the microphone:

  -Make sure that the mic hole is clear and unobstructed. It's the small hole at the back of the lens of the camera (the camera back). For the 16 GB one without rear camera the hole of the microphone is on the top edge near the Center.

  -Open the voice memos app and see if you see the movement on the needle of the meter GIVEN or changes in mobile graphic waveform with changes in the level of noise recording.

  Also:

  -Reset the device iOS. Nothing will be lost

  Device iOS Reset: Hold down the On / Off button and the Home button at the same time for to

  ten seconds, until the Apple logo appears.

  -Reset all settings

  Go to settings > general > Reset and tap reset all settings.

  All your preferences and settings are reset. Information (such as your contacts and calendars) and media (such as songs and videos) are not affected.

  -Restore from backup. See:

  Restore your device from an iCloud or iTunes backup - Apple Support

  https://support.Apple.com/en-us/HT204184

  -Restore factory settings/new iOS device.

  If still problem, make an appointment at an Apple store Genius Bar because it appears that you have a hardware problem.

  Shop Apple Store - Genius Bar

  https://www.Apple.com/retail/Geniusbar/

  I myself would get an iPad Mini because I find the screen of the iPod too show and difficult to use. But it really depends on your preferences. That mini iPad fits well is a pocket.

• Dynamic EUCON

  I'm an Avid control surface artist Mix that fits well with Logic Pro X. The only thing that doesn't work is the "dynamic" button It would be great if logic could be programmed to respond to this button in a future version! The EQ button works perfectly and the EQ appears when you hit...

  This is a user to user forum, Apple don't come here. Make a request to Apple via the feedback menu item in the logic or fill out this form online for Apple to hear from you:

  http://www.Apple.com/feedback/Logic-Pro.html

• Use keyboard PA5132E-1EKB with AT300SE tablet?

  Hello

  What I can and connect an AT300SE tablet with keyboard covers PA5132E-1EKB? The Tablet fits well into the sheath of keyboard?

  Thanks and greetings

  For the record, no, AT300SE Tablet does not fit into the PA5132E keyboard cover.
  I tried it myself.

• HP Envy 700-249: upgrade graphics from GT635 to GTX960... I was wondering if computer supports

  Hello

  I am looking to update my graphics card between a GeForce GT 635 a 960 GeForce GTX amp.

  I was wondering if my computer would be able to support it, and if the card would fit well inside?

  My computer specs:

  HP Envy 700-249

  Intel Core i7-4770

  CPU @ 3.40 GHz

  12 GB of Ram

  Power: 460 W

  Thank you

  Mitchell

  Greetings,

  Your PC BIOS will support the map.

  You need a 6 connection pins on the map.

  The card is a double slot and 9.5 inches in length. Check your turn measures and make sure that you can install a card double slot.

  The food is fine, as long as you have a connection to pine trees six or eight available.

  NVIDIA provides an adapter.

  Disable secure boot. Enable legacy start.

  See you soon!

• HP Pavilion Phoenix h9-11704 cooling system improvement

  Hi all.  I have a HP Pavilion Phoenix h9-11704 Office cooling system liquid does not and I can't find the spare parts for it.  So I would like to turn the cooling system to a standard cooling system, but have no idea what parts I need reference numbers.  Does anyone have any suggestions?

  Thank you.

  What

  Well I finally found something that seems to work.  The installation was quite easy and the device fits well in my Tower.  I run the PC for a few days to see if I have problems, so I'll post back then.

  The point that I have installed:

  Noctua NH - U9S Premium quality quiet cooler for Intel CPU

  https://www.Amazon.com/GP/product/B00TBHYYFK/ref=oh_aui_detailpage_o00_s00?ie=UTF8 & PSC = 1

  There are several kits installation provided with the device.

  What

• HP Envy 700-311na: a GTX 1060 will agree and will work in my PC?

  Hello!

  I'm looking to upgrade my GPU one AMD Radeon R9 270 the new GTX 1060 (or other).

  I understand that there are several versions of a GPU and I don't know what is best for my PC. I'm especially afraid the 1060 does not fit into my PC.

  Here is a link to my PC and its specifications: http://support.hp.com/us-en/document/c04343334

  Here is a link on the 1060 GTX that interests me now: https://www.amazon.co.uk/gp/product/B01IPFMVCQ/ref=s9_simh_gw_g147_i1_r?ie=UTF8 & fpl = fresh & pf_rd_m = A3...

  Thank you

  Since it is small and tight. You want the kind of style of card fan. If you don't get that kind. You are trapping just hot air inside your case and will make the card running more hot. I have a GTX 1080 founders edition in mine and it fits well.

  Now, you know for SURE!  If you go with the 1070. Change the power supply. I had the same stock 500w version in mine. As you know. It has a 8 pins and power connectors 6 pin with this power supply. The 1080 requires an 8 pin. So, I plugged this in there.

  When I put a load on it. My PC will restart. I knew it was a power supply problem. So, I tried to take the 2 6 pin power plug and those with the power adapter 8 pin supplied with the card used. While it worked. There was a groan of excessive coil of card and he ran hotter inside.

  I imagine pushing the stock PSU to many. I changed out immediately after that a SuperNOVA P2 EVGA 650w PSU and its dead silent now.

  No equipment issues at all. Photo attached.

  

• Update graphics card on HP Pavilion PC h8-1214

  Can someone suggest a good upgrade for the video graphics card on my son's computer?  It's a HP Pavilion HPE h8-1214 desktop PC.  It is an age of high school gamer so I'm looking for something in the sub series $400 (or even less if possible).  I don't know if he really needs an upgrade, but when he bought the computer, the former owner told him that he should update the graphics card in about a year.  I think he still has the card that came with the computer. a graphics card Radeon HD 7450 with 1 GB of DDR3 memory dedicated.  I guess I also need to check and see if she still only a 300W power supply or if the previous owner has replaced that.  Site HP says that there must be a PCI Express x 16.

  Hello

  A video card the fastest for the games will require at least a 500 Watt power supply.  The Corsair CX500, or CX600 would fit well in the H8-1214.  As for a video card, NVIDIA GTX 660 (double wide card) should be enough for most modern video games.

  Read this post: selection of a discrete graphics card Guide.

• Satellite A300-1N9 - where can I download Windows 7 drivers and tools?

  Welcome

  First of all I would like to thank you for any help or direct me to an idea about the drivers for this model, a moment, I will describe what exactly it.

  I bought this laptop with Vista I got a CD with the system and on this recording were already pilots and Add-ons for your laptop or other cool things like drivers Toshiba for camera, Bluetooth, Synaptics, dvd and a program or driver software I don't know exactly what it is, but such a cool thing that allows you to adjust the lighting on the whole Panel , including a laptop with the word "Satellite". Everything fits well, but only with Vista that I received from the Board of Directors of Toshiba.

  Now, I went on Windows 7 as for the fundamental factors that have webcam driver from the manufacturer Toshiba for example or a mouse. But most I count on these things I had with Vista, even if that Panel backlight laptop.

  Does anyone have an idea on what all the additives in the CD that I got, it of Vista where, somehow, you can extract these extras or is a site where you can download all or a list of these additives to win game 7

  Thanks again in advance for any help.

  Your
  WolfMark

  Hello

  First of all, you can download all the drivers and tools on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Illuminating buttons and illuminated satellite to install Toshiba Value added Package. It activates the functions on the FN keys.
  As far as I know that lighting can also be enabled/disabled in the BIOS. Check this box!

  The driver for the webcam is also listed on the Toshiba page and touchpad driver to allow virtual scrolling.

  I hope I could help a bit! :)

  Good bye

• Pavillion DV6: DV6 restart when stop

  Help!

  I'm a COMPUTER tech and have never known a subject as frustrating as this.

  If I have laptop DV6 of off windows startmenu and application downtime everything fits well and looks at the stop, but there is a break of about 2 or 3 seconds where all the lights turn off and then restarts the DV6. Here is what I tried

  1. update of the bios

  2 restoration

  3 complete the restore of the original Image and install fresh win7

  4 restore from original image and then upgrade to Windows 10

  5 Windows 10 fresh install

  6. looked in the bios for any power related wake ups

  7 disabled restart automatically the system failure

  8 temporarily disabled all network and Device Manager bluetooth devices

  In addition, the battery is completely removed and I tried 3 power supplies just in case separate HP.

  Needless to say that a difficult stop holding down the power button is fine.

  Someone at - it solved that problem, if they made the experience?

  Thank you very much in advance for any ideas or solutions

  Have you thought to remove the hard drive and boot the laptop in ONE-WAY Windows usb flashdrive and then try closing?

  An alternative would be to remove the current hard drive and install the operating system to another as a test.

  Which is to isolate the problem as related material.

  There could be a problem with the hard disk, you use.

• HP 500-214: size

  A msi gtx 960 (10.75 "x 5.12") http://www.newegg.com/Product/Product.aspx?Item=N82E16814127844 gets back in my case. I have a geforce 550 ti (8.25x4.376) installed that fits well. If this isn't the case, everything is switching to a new possible case?

  It's a HP Pavilion 500-314?

  If so, I suggest you not to install what the gtx960 is more than an inch longer than your motherboard... theoretically it would work Yes, but if you use it could lead to problems with circulation of air and cause times high in your components... your mobo is a 9.6 * 9.6 (just so you know)... it would fit in your case , but not in your mobo, is what im trying to say...

  If you have already purchased, then you can use it, record the temperature of your cpu and gpu... If they are within the limits, then it is fine...

  and Yes all this passage is possible... you need a motherboard with the same socket that you currently have (FM 2 +), the same ram slot (ddr3)... and try a larger form factor... ATX (if you're ready to buy a new motherboard it is)... If you're going to be case change, you should get an ATX case with support Μatx

  (Did this answer solve your message or question?

  If Yes, then share the good news! Inform others that this response was helpful in accepting this solution.
  You can also show your appreciation by giving glory.)