fix for Microsoft net framework 3.5 sp1 for windows 8

I'll install the 13 ansys software in windows 8. I have problem that it asks to fix microsoft net framework 3.5 sp1, the fix for microsoft net framework 3.0 SP2, hotfix from microsoft net framework 2.0 Service Pack 2. What should you do? Please help me.

To me, he is asked for 3 different patches.
MS. NET Framework 2.0 SP2 patch
MS. NET Framework 3.0 SP2 patch
MS. NET Framework 3.5 SP1 patch

Where to get these fixes for windows 8?

Tags: Windows

Similar Questions

  • Microsoft for Microsoft .NET Framework 1.1 SP1 security update

    When enabled Microsoft update, the following message is received: the following updates have not been installed.  "A security update for Microsoft. NET Framework 1.1 SP1 on Windows XP, Windows Vista and Windows Server 2008 x 86 (KB2656353.  My operating system is Microsoft Windows XP Home addition.  I tried Microsoft difficulty It Center, which has not corrected the problem. Help

    Hello

    ·         What tool Microsoft Fixit did you run?

    ·         You get an error code?

    ·         You are able to install some other updates?

    Follow these methods and check if that helps.

    Method 1:

    You may need to repair your installation of .NET Framework, if you upgrade your operating system or if the installation of the current framework is damaged. This article explains how.

    How to repair an installation existing.NET Framework

    http://support.Microsoft.com/kb/306160/en-us

    Method 2:

    This describes step by step how to solve problems that you may experience when you install the .NET Framework 1.1 in Windows XP.

     

    How to repair an installation existing.NET Framework

    http://support.Microsoft.com/kb/824643

     

     

    Method 3: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.

    http://www.Microsoft.com/download/en/details.aspx?ID=33

     

     

    Method 4:

     

    To install this security update, you must have Microsoft Windows Installer 3.1 or a later version installed on the computer. For the latest version of Windows Installer for the computer, see the Microsoft Web site at the following address:

    http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

     

    See also:

     

    MS09-061: Description of the update of security for the Microsoft.NET Framework 1.1 Service Pack 1:13 October 2009

    http://support.Microsoft.com/kb/953297

  • I try to install peachtree and I got a pop up saying that peachtree acct could not be started because of microsoft Net Framework 3.5 SP1 is missing or damaged.

    Help!

    I try to install peachtree for my online acct 110 class and I got a pop up saying that peachtree acct could not be started because of microsoft Net Framework 3.5 SP1 is missing or damaged. Would you lide to read the instructions for the installation of .net online now? I said yes and did, but was told by Deputy peachtree, after that it wasn't that I maybe shouldn't do that because my laptop has the circle start button in the lower left corner and has something to do with the hard drive. I don't know, but am trying to get this peachtree 2012 to work so I can start my classes. Can someone help me please?

    RB_844

    Because it was blue

    In control Panel- programs

    Select uninstall programs

    Select Windows turn features on or off in the menu on the left side of the screen

    Uncheck the box next to Microsoft .NET Framework 3.5.1

    Click OK

    Restart the PC

    In control Panel- programs

    Select uninstall programs

    Select Windows turn features on or off in the menu on the left side of the screen

    Check the following Microsoft .NET Framework 3.5.1

    Click OK

    Restart the PC

    Run Windows updates

    Check if the problem persists

  • I need assistance with Microsoft Net Framework 3.5 SP1!

    An application requires Microsoft net framework 3.5 SP1 and download it as a whole to the top. 3.5 SP1 requires 3.5 which requires 3.0, which gives me this error:

    You must use "Turn Windows features on or off" in Control Panel to install our Microsoft .NET Framework 3.0 configuration.

    Here's my window "Turn Windows features on or off":

    Luis Pina III A

    http://blogs.msdn.com/b/astebner/archive/2007/03/14/mailbag-what-version-of-the-NET-Framework-is-included-in-what-version-of-the-OS.aspx

    To solve the problems of installation of .NET Framework:

    http://blogs.msdn.com/b/astebner/archive/2008/03/07/8108332.aspx

  • The update wants to do a net framework 1.1 SP1 on Windows XP, Vista and windows server 2008 x 86. KB2656353 but can not. Why not?

    The update wants to do a net framework 1.1 sp1 on Windows xp, vista and windows swrver 2008 x 86 (KB2656353), but can not.  Why not?  He simply has it again and again without updating.

    I finally got by a 'person' and he took over the computer.  It took almost 2 hours, but he finally managed to fix the problem and get the update installed.  Hooray!

  • Microsoft net framework 3.5 sp1 fails during setup error microsoft visual studio code 1603 event 8

    installation failure

    installation of visualstudio8 of type event

    P1: 35101

    P2: 23.5.30729.01_orcas_x86_net

    P3: mc

    P4: inst

    P5: f

    P6: ca_installassemblydef.3643236f_fc70_11de_a536

    P7: 0

    P8: 1603

    P9:.

    P10: gencomp760_ {12cd

    included files are

    c:\DOCUME~1\hp_own~1.tra\locals~1\temp\wlf23e.tmp

    c:\    "              "        "        "      "         "       "        \sdb23f.tmp

    c:\           "" "" "\vsw3\vsswms1 txt summary.

    c:\            "               "          "               "           "     \install time.txt

    c:\             '                '       ''           "              "         \failinfo.txt

    This is the report that he puts out

    OK guys no worries, I managed to get around while pulling hard drive icons for now everything seems to work ok thanks for the help

    Mikey.

  • Family and dot net framework 3.5 sp1 update Setup error

    Hi all

    my system is windows vista 32 bit sp1.whenever I use windows update to install
    IMP updates dot net framework 3.5 sp1 and update family gives x error 0643.
    After crossing the suggestion given for this error to microsoft, I tried to
    manually install, but it gives error with desc set. and connect you as below. Help, please:

    Description:
    Microsoft .NET Framework 3.5 SP1 has encountered a problem during installation.  Setup did not complete successfully.

    Signature of the problem:
    Problem event name: VisualStudio8Setup
    Signature of the 01:35101 problem
    Signature of the problem 02: 3.5.30729.01_ORCAS_X86_NET
    Signature of the problem 03: CBS
    Signature of the problem 04: INST
    Signature of the problem 05: F
    Signature of the problem 06: gencomp750, {61040379-156d-4ece-b126-ea395a3b2
    Signature of the problem 07: BASERET_UNKNOWN
    Signature of the 08 problem: -.
    Signature of the 09 :-2145124330 problem
    Signature of the problem 10: WUSA
    The system version: 6.0.6001.2.1.0.768.3
    Locale ID: 1033

    More information about the problem:
    LCID: 1033

    Read our privacy statement:
    http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409

    Error log:
    [06/23/12, 23: 57:04] Microsoft .NET Framework 2.0SP1 (CBS): [2] Failed to fetch of installation file in CBaseComponent::PreInstall()
    [06/23/12, 23: 57:04] setup.exe: ISetupComponent::Pre/Post/Install() [2] failed in ISetupManager::InternalInstallManager() with HRESULT-2147467260.
    [06/23/12, 23: 57:04] setup.exe: CSetupManager::RunInstallPhase() [2] - call to install/Pre/Post for InstallComponents failed
    [06/23/12, 23: 57:04] setup.exe: [2] CSetupManager::RunInstallPhaseAndCheckResults() - RunInstallPhase() returns a NULL piActionResults value
    [06/23/12, 23: 57:04] setup.exe: [2] CSetupManager::RunInstallFromList() - RunInstallPhaseAndCheckResults failed [2]
    [06/23/12, 23: 57:05] setup.exe: [2] ISetupManager::RunInstallLists (IP_PREINSTALL failed in ISetupManager::RunInstallFromThread()
    [06/23/12, 23: 57:05] setup.exe: ISetupManager::RunInstallFromThread() [2] failed in ISetupManager::RunInstall()
    [06/23/12, 23: 57:05] setup.exe: CSetupManager::Run() [2] - call to RunInstall() failed
    [06/23/12, 23: 57:05] WapUI: DepCheck [2] indicates Microsoft .NET Framework 2.0SP1 (CBS) is not installed.
    [06/23/12, 23: 57:05] WapUI: DepCheck [2] indicates Microsoft .NET Framework 3.0SP1 (CBS) was not attempted to be installed.
    [06/23/12, 23: 57:05] WapUI: DepCheck [2] indicates Microsoft .NET Framework 3.5 'package' was not attempted to be installed.
    [06/24/12, 00:23:55] Microsoft .NET Framework 2.0SP1 (CBS): [2] error: Installation for the Microsoft .NET Framework 2.0SP1 (CBS) component failure. MSI returned error-2145124330 code
    [06/24/12, 00:24:11] WapUI: DepCheck [2] indicates Microsoft .NET Framework 2.0SP1 (CBS) is not installed.

    In fact, I have recovery error CTOERROR.flg while installing windows dvd recovery discs and the fix - it asks to restart windows that if I do it asks me to reinstall windows bcz higher error.

    I am manually installingb through the planned introduction in the link that you shared... when I got the above error...

    Have you checked for hard drive failure?

    http://h10025.www1.HP.com/ewfrf/wc/document?LC=en&DLC=en&cc=us&DocName=bph05701&product=12455#N173

    Re: ctoerror.flg

    Incomplete recovery

    One solution was to remove all xxxx and repartition the hard disk

    http://h30434.www3.HP.com/T5/notebook-operating-systems-and/dv4-models-recovery-incomplete-failure-duplicable-problem/m-p/173139

    Order a DVD of Windows Vista SP2

    http://Windows.Microsoft.com/en-us/Windows-Vista/learn-how-to-install-Windows-Vista-Service-Pack-2-SP2

  • Error code 57 Windows Update (Kb951847) x 86 NET Framework 3.5 SP1.

    EU to my Vista 32 bit Desktop (Presario SR5210NX) F11, then reinstall 90 + Windows updates.

    Cannot install update Microsoft .net Framework 3.5 SP1 and NET Framework 3.5 Family update (KB951847).

    Ony has 1.1 Framework is installed.

    Have you tried Microsoft Fix it among other things with no luck.

    Do I have to first install Framework 2 and 3 prior to version 3.5?

    Help

    Hello:

    You can install this application without the upgrade.

    Try the stand-alone download and see if it will.

    http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=22

    Paul

  • I have microsoft net framework 2.0 service pack 2... and msnf 3.0 sp2... and msnf 3.5 sp1... and the microsoft compression client pack 1.0 for windows... should I all of this on my computer?

    I have microsoft net framework SP2 2.o... and sp2... msnf3.0 and msnf3.5 sp 1... and the microsoft compression client pack 1.0 for windows... should I all of this on my computer?

    See:

    What is the .NET Framework, and I need all these versions?
    http://ask-Leo.com/what_is_the_net_framework_and_do_i_need_all_these_versions.html

  • Norton deleted and Microsoft .NET Framework - why security search bar? When these extensions available for Firefox 4? How can I go back to the previous version?

    After having downloaded and installed the new Firefox 4.0, I learned 2 extensions could not be installed. A notice would monitor the compatibility and availability and would notify me when those extensions are available. So who's going to happen, I prefer to use Norton Security when searching on the web and don't know what did Microsoft NET Framework, so don't know how important it is.

    Symantec needs update their Firefox Add-ons to make them compatible with Firefox 4. They indicated that, for Norton 360, they plan to release a update of Norton 360 to support Firefox 4 in early may - http://us.norton.com/support/kb/web_view.jsp?wv_type=public_web & docurl = 20100720113635EN & ln = en_US

    I don't know about the time scale for the updates for other Norton products. Waiting for the update by Symantec, if you want to use Norton modules, you will need to downgrade to Firefox 3.6.

    Downgrade to Firefox 3.6 first of all uninstall Firefox 4, but do not select the option 'remove my Firefox personal data '. If you select this option, it will delete your bookmarks, passwords and other user data.

    Then you can install the latest version of Firefox 3.6 available to http://www.mozilla.com/en-US/firefox/all-older.html - it will automatically use your favorite courses, passwords etc.

    I recommend, to avoid possible problems with decommissioning, accessing your profile folder and delete the following files if they exist - extensions.cache, extensions.rdf, extensions.ini, extensions.sqlite and localstore.rdf. Delete these files will force Firefox to rebuild the list of installed extensions, check their compatibility and cancel the toolbar customizations.

    For more information on how to find your profile folder, see https://support.mozilla.com/kb/Profiles

    Module additional Microsoft NET framework also supports ClickOnce, I never found any need.

  • Error code 66 is to update security for Microsoft NET Framework 4 on Windows Vista (KB2160841)

    When you try to install the update of security for Microsoft NET Framework 4 on Windows Vista (KB2160841) I get an error 66 a code, I can't identify the problem, I tried to install this update for some time (of the month) any other facility of updates without problem.

    Take a look at this:
    Windows update error .net framework 4 will not update - 66A error code
    http://social.msdn.Microsoft.com/forums/is/netfxsetup/thread/02b7b01f-2a04-4352-AFEB-3a5250ebe0ef
    For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

  • I have Microsoft NET Framework 3.0 SP 2 and .NET Framework 3.5 SP1 don't I need both

    I'm trying to save space on my XP Home edition.  I have Microsoft NET Framework 1 and 2.0 SP2 (191 MB) NET Framework 3.0 SP2 (182MB) & Net Framework 3.5 SP1 (30,66 MB) do I have all these or I can remove it at least one by thanking Gormaur

    Hello

    I suggest you to remove any version of Microsoft .net Framework, because it could affect the performance of the operating system.

    You can use the disk cleanup utility to free hard disk space. See the steps in the following article:

    Description of the tool in Windows XP disk cleanup.

    http://support.Microsoft.com/kb/310312

  • Securty update for microsoft net framework on windows xp Server 2008 x 86 {2572067} 1.1sp1 could not be installed

    tried several times ms11-078 security bulletin

    Hi johnhayes003,

    1. Did you the latest changes on the computer?
    2. You receive an error message when you install the update?
    3. You are able to install some other updates on the computer?
    4. You have security software installed on the computer?

    Method 1

    I suggest that reset you Windows Update for default components and try to install the update, check if it installs properly.

    How to reset the Windows Update components?

    http://support.Microsoft.com/kb/971058

    Method 2

    If the previous step fails then I would suggest that you manually download and install the update.

    Security Update for Microsoft .NET Framework 1.1 Service Pack 1 on Windows XP, Windows Server 2003 (64-bit), Windows Vista and Windows Server 2008

    http://www.Microsoft.com/download/en/details.aspx?ID=27715

    If the previous step fails then I would suggest see you the update history for the complete error message related to the failure of the update and post back with the details.

    (a) open Windows Update by clicking Start , all programsand then click Windows Update.

    (b) in the left pane, click view update history.

    (c) to view more information about an update, double-click it.

  • Update fails for NET Framework 3.5 SP1, the system is caught in a loop

    I have Windows XP Pro - the computer crashes, when I restart it says download Windows updates. Cannot update NET Framework 3.5 SP 1 - caught in a loop. Help

    Hello

    1. What is the exact error message?

    2 did you change on your computer before this problem?

    You can follow the suggestions and then check.

    Method 1

    Step 1:

    You can start your computer in safe mode.

    A description of the options to start in Windows XP Mode

    http://support.Microsoft.com/kb/315222

    S tep 2 :

    Restore the system to a date and time when the computer was working fine before.

    How to restore Windows XP to a previous state

    http://support.Microsoft.com/kb/306084

    Note: You cannot cancel changes to the safe mode system restore.

    Method 2

    Step 1:

    Place the computer in a clean boot state.

    How to configure Windows XP to start in a "clean boot" State

    http://support.Microsoft.com/kb/310353

    Note: After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.

    Click Startand then click run.

    Type msconfigand click OK.
    The System Configuration utility dialog box appears.

    Click the general tab, click Normal Startup - load all device drivers and services, and then click OK.

    When you are prompted, click restart to restart the computer.

    Step 2:

    Download and install the update from the link.

    Microsoft .NET Framework 3.5 Service Pack 1

    http://www.Microsoft.com/download/en/details.aspx?ID=22

    See also:

    How to reset the Windows Update components?

    http://support.Microsoft.com/kb/971058

    You cannot install some programs or updates

    http://support.Microsoft.com/kb/822798

    How to troubleshoot common Windows Update, Microsoft Update and Windows Server Update Services installation

    http://support.Microsoft.com/kb/906602

  • NET Framework 1.1 SP1 installation fails. Error code: 0x66A. 867460 reference

    Why the NET Framework 1.1 SP1 install fails everytime I try? Error code: 0x66A. 867460 reference

    It downloads, but the installation fails.

    I have latest updates installed.

    See: http://social.answers.microsoft.com/Forums/en/vistawu/thread/0ffda4f1-4a9f-426a-94f4-4d6bd92ec2e2

    66A: he cannot find the files of origin or something of memory, setting is corrupted.

    You can simply fix Framework 1.1

    TaurArian [MVP] 2005-2011 - Update Services

Maybe you are looking for