Fix using Microsoft 50446: the user profile service service has no logon. User profile cannot be loaded.
About Microsoft fix 50446 found here http://support.microsoft.com/kb/947215#letmefixit for the user profile Service error, I have three questions about it:
1. what exactly does this automated solve this downloadable program change / do?
2 would you recommend to fix "user profile Service service has no login" or would you recommend that the problem resolved manually?
3. currently, when I log on my computer's built-in Administrator account using safe mode, I am unable to change any other user account or create a new user account. I'm unable to connect to is account only administrator of my computer. If I delete this account, I then will be able to create a new administrator account by using the built-in Administrator account on the computer that is running in safe mode?
Any help on this is greatly appreciated. Thank you.
Mr Wizard is essentially the same as the manual process. If there is a difference, I'm not aware. Personally, I prefer manual processes that I feel I have more control - but others prefer the automated process, because it is simpler. The choice is yours and I don't think in the long run it's important.
Question 3 is more difficult to answer. As the only administrator account on the system, remove leaves you only with the built-in Administrator account which, currently, is not working as you can not use it even to create another administrator account. Here, the hope is that the patch will solve the underlying problem and the high administrator account will work as normal once the fix is completed - however, I can't guarantee that will be the case because I've never done this procedure when the problem of account is the only account to administrator on the system.
It should work, but if it isn't then you will be in the situation where you have no active and functional administrator account (if even the built-in Administrator account does not work as an administrator account - as seems to be the case at the moment, but can change once completed correction - or for some reason any cannot be enabled or accessible) and the only solution to this problem is a clean install. For this reason I recommend you make a backup completes before attempting this, unless your data will be safe.
I should add that I'm not sure that you have many choices, because this is pretty much the way to solve this problem and I do not know other solutions that work.
I hope this helps and that I could be more reasssuring, but that's as far as I know the problem, the fix, the situation, the solution proposed and the potential consequences.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
Tags: Windows
Similar Questions
-
Original title: cannot use my administrator profile
When loging on my laptop, I get this error when I click on my profile administrator "user profile Service is not the user of the connection profile cannot be loaded. This comes after the password is accepted. The only way I can connect to my computer is one of my accounts of comments. I can't change anything because I can't sign as an administrator. How can I fix? I have a Compacq laptop running Windows Vista
Original title: cannot use my administrator profile
When loging on my laptop, I get this error when I click on my profile administrator "user profile Service is not the user of the connection profile cannot be loaded. This comes after the password is accepted. The only way I can connect to my computer is one of my accounts of comments. I can't change anything because I can't sign as an administrator. How can I fix? I have a Compacq laptop running Windows Vista
If you cannot connect to your admin account, no tutorials can help you because they need you to connect to an administrator account to carry out the instructions.
See if the following can get an admin account...
Go to Safe Mode...
Restart your computer > immediately and repeatedly pressing the F8 key until you see a black and white screen. The top/down arrow and select Mode safe mode with networking.
Now, while in safe mode, you perform one of the following?
1 can connect to your account admin without the error message?
If so, do. Then do a system restore. Choose a date when you were free to login to your account admin as your restore point.http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/
If the system restore does not slove the problem, then use this tutorial
http://support.Microsoft.com/kb/947215
2. If you are unable to log in to your account administrator in safe mode, you see another administrator next to your account?
If so, you are lucky. This is the built-in Administrator account.
There is, by default, no password.
It could connect and do the system restore.If the system restore is not enough, then perform the tutorial even as above:
http://support.Microsoft.com/kb/947215If you can't do or of what precedes, I'm afraid you will have to re - install your Vista.
-
THE USER PROFILE SERVICE service failed the logon__User profile cannot be loaded
I read the previous discussions, so what I need is someone who has the patience and the time to walk through Windows 7 Home Premium for Dummies with me. I have a friend who has updated all my software on Windows 7 and has added many other applications for a handsome sum. A FRIEND. I was on my labtop there is only 1 hour returned to connect and I get this message to the CONNECTION SCREEN...
THE USER PROFILE SERVICE service has no logon.
User profile cannot be loadedI'm on the front screen. No office, NO option to use a different connection name, no Director... Just my name and my password. My Blue tutorial button to the left and my red farm option to the right. I can't do all the things I've read on because I can't get the properties... blah blah. I know that I delete anything... I could not... I don't know how. I just need help, restore peace of mind only I get from a busy daily life.
Peuvent some please help?
Hello
This also happened to me in another case. All local users are unable to connect they get this error. For example if I enable comments or create a local user account that is a member of the 'users' group I get this error when you connect using the accounts of the said that has been set with a blank password. However, I was able to use my administrator account to manage my machine. You probabbly deleted your permissions on the "C:\Users" folder or the root of the drive itself. If you have a local account, you can plug this hard drive into a computer with the same OS as slave then add "everyone" group with full control and select inherit permissions from parent. Restart, and then try. I hope this helps. C =
-Julius P.
MCP, MCDST
-
The user's Department failed the logon__user profile cannot be loaded
The service of the user didn't login
User profile cannot be loaded· Restore point:
Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.
Try a restore of the system once, to choose a Restore Point prior to your problem...
Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~If the above does not work:
http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx
Difficulty of a corrupted user profile
After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
http://support.Microsoft.com/kb/947242
A temporary profile is loaded after you connect to a Windows Vista-based system
See you soon.
Mick Murphy - Microsoft partner
-
Our plant manager just got a new PC and I've set up with Windows 7. I can log on fine using my user account. But when it tries to connect, it receives the "the user profile service has no logon. Error could not load the user profile. It can connect to other computers fine, Windows XP & Windows 7 computers. It's just that a laptop could not connect to.
It was a VIP user. He's my boss of bosses bosses if you know what I mean. What I can do. I tried "patches" for the mistake that I found online, but none of them helped.Help me! Please, I beg you!I did other tests just now and I seemed to have found a "solution". Here are the steps:
1 Add the user to the local Administrators group2 log in as a user3. close the user session4 log in as network administrator / local5 remove the user from the Administrators group6 log in as user7. the success!Still do not understand what was going on the devil, but at least I know the work around her now! -
Service user profile Service has no logon. (State continues to change on 32768)
I got the error "user profile Service service doesn't have the connection.", so I searched the Internet and found the microsoft registry editor guide, so I followed him but every time I put the 0 State, if I logout and log turn it on in safe mode it changes back to 32768? How can I stop it changing back?
Hello
These methods should help for Windows 7 or Vista.
References to Vista also apply to Windows 7.
You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. THE ADMIN
Safe Mode account has no default password (so unless someone changed
the password should be available).Some programs such as the Google Updater (if you've added the Google toolbar,
Chrome or Google Earth) has been known to cause this problem.Error message when you log on to a Windows Vista-based or Windows 7
computer by using a temporary profile: "the user profile Service has no logon.Unable to load the user profile.
http://support.Microsoft.com/kb/947215Difficulty "the user profile Service has no logon. User profile cannot be loaded. "Error in Windows 7
http://www.SevenForums.com/tutorials/186131-user-profile-service-failed-logon-user-profile-cannot-loaded.htmlHow to fix error "the user profile Service has no logon. Could not load user profile. "in Vista & Windows 7.
http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.htmlHow to fix error "your user profile was not loaded correctly! You have visited
logged on with a temporary profile. "in Vista & Windows 7.
http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.htmlBE VERY CAREFUL IF YOU USE THIS ONE:
DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.
----------------------------------------------------------------------------------------------------------
For Windows 7:
http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.htmlUse the hidden administrator account to lower your user account APPLY / OK then
Raise it to ADMIN. This allows clear of corruption. Do the same for other accounts
If necessary after following the above message.You can use the hidden - administrator account to make another account as an ADMINISTRATOR with
your password even (or two with the same password) use a test or difficulty to another.You can run the command Admin account hidden from the command prompt
from there if necessary.How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
http://www.SevenForums.com/tutorials/668-system-recovery-options.htmlWhat are the system recovery options in Windows 7?
http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7How to create a Windows 7 system repair disc
http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html----------------------------------------------------------------------------------------------------------
For Vista:
How to enable or disable the real built-in Administrator account in Vista
http://www.Vistax64.com/tutorials/67567-administrator-account.htmlUse the hidden administrator account to lower your user account APPLY / OK then
Raise it to ADMIN. This allows clear of corruption. Do the same for other accounts
If necessary after following the above message.You can use the hidden - administrator account to make another account as an ADMINISTRATOR with
your password even (or two with the same password) use a test or difficulty to another.You can run the command Admin account hidden from the command prompt
from there if necessary.This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxWhat are the system recovery options in Windows Vista?
http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-VistaHow to create a Vista - free methods recovery disk
http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html---------------------------------------------------------------------------------------------------------
If you can't access your old account you can still use an Admin to migrate to one
new (remember to always leave an account Admin who is not used except)
to test and difficulty).Difficulty of a corrupted user profile
http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspxI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
WIndows Vista user profile cannot be loaded
Original title: error message when you connect using windows vista home edition saying user profile service failed to use the connection profile cannot be loaded
second time display error message when the connection using windows vista home edition saying: could not load the user profile service doesn't have the profile of user logon
Hello
I suggest you follow the step below and check if it helps.
Step 1:
When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:
The user profile Service has not logon. User profile cannot be loaded.
-
a user account cannot be loaded and pop up asking admin password
original title: my problem is that the user just went every time when I want to connect it says the user account cannot be loaded. pop window on request an administrator password, which i do not know.what?
proven system recovery
Hi agicork,
1. don't you make changes before the show?
2 have you tried to restore the computer to an earlier time?We recommend that you download and run the Microsoft Fix it or follow the manual steps to fix the problem:http://support.microsoft.com/kb/947215
Very important: Modifying the registry incorrectly will cause serious damage to the computer. Back up the registry until you make changes.
See Registry backupVisit our Microsoft answers feedback Forum and let us know what you think.
-
I CAN NOT LOG - ON
I AM THE ADMIN, BUT I CAN NOT CONNECT ON THE ERROR MESSAGE IS - THE USER PROFILE SERVICE HAS NO OPENING SESSION IMPOSSIBLE TO LOAD THE USER PROFILE... HOW CAN I FIX?
Hello
1st thing to try is the system in safe mode restore to before the problem
http://www.windowsvistauserguide.com/system_restore.htm
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
- Select the Safe Mode option with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
If that does not solve it read more
read the tutorial below
When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:
The user profile Service has not logon. User profile cannot be loaded.http://support.Microsoft.com/kb/947215#letmefixit
Your user profile was not loaded correctly! You have been logged on with a temporary profile.
http://support.Microsoft.com/kb/947242
If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.
http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile
-
I can not connect to. Software Microsoft gets Ths user profile Service Service has no connection user profile cannot be loaded.
Hello
References to Vista also apply to Windows 7.
You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. Safe Mode ADMINISTRATOR account has no password by default (unless someone has changed the password so it should be available).
Some programs such as the Google Updater (if you added the toolbar Google, Chrome or Google Earth) has been known to cause this problem.
Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.
http://support.Microsoft.com/kb/947215Difficulty "the user profile Service has no logon. User profile cannot be loaded. "Error in Windows 7
http://www.SevenForums.com/tutorials/186131-user-profile-service-failed-logon-user-profile-cannot-loaded.htmlHow to fix error "your user profile was not loaded correctly! You have logged on with a temporary profile. "in Vista & Windows 7.
http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.htmlBE VERY CAREFUL IF YOU USE THIS ONE:
DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.
How to enable or disable the built-in Windows 7 Administrator account
http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.htmlUse the hidden administrator account to lower your user account APPLY / OK and then lift it to ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after following the above message.
You can use the hidden - administrator account to make another account as an ADMINISTRATOR with the same password (or two with the same password) to use a test or fix the other.
You can run the Admin account hidden from the prompt by if necessary.
How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
http://www.SevenForums.com/tutorials/668-system-recovery-options.htmlWhat are the system recovery options in Windows 7?
http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7How to create a Windows 7 system repair disc
http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.htmlIf you cannot access your old account, you can still use an Admin to migrate to another (remember to always leave an Admin who is not used except for testing and difficulty account).
Difficulty of a corrupted user profile
http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profileI hope this helps.
--------------------------------------------------------------------------------------------
Rob Brown - Microsoft MVP<- profile="" -="" windows="" and="" devices="" for="" it :="" bicycle="" -="" mark="" twain="" said="" it="">-> -
Error - "the user profile service has no logon.
Original title - login
When I try to log in. I get the message. The user profile service service has no logon. How can I fix it?
Hi DonPatton
1. what operating system is installed on the computer?
2. for how long have you been faced with this problem?
If you are using Windows Vista or 7 operating system installed on the computer, then you can refer to the link below and check if the steps provided assist solve you the problem-
http://support.Microsoft.com/kb/947215
I hope this helps.
-
The user profile service has not logon. User profile cannot be loaded.
This showed on my computor someday on my connection, and I am the administrator. So now I can not change anything on computor or backups or add programs or delete. I did nothing before that happened. Any help would be appreciated. I tried safe mode, but that did not solve the problem. I need a simple solution that I'm not terrible with computors. Thank you Sandy
Hello
You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
Mode has no default password (unless someone has changed the password so it should be available).Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
has been known to cause this problem.Error message when you log on a Windows Vista-based or Windows 7 using computer a
Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
http://support.Microsoft.com/kb/947215How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.htmlHow to fix error "your user profile was not loaded correctly! You have been connected with a
temporary profile. "in Vista
http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.htmlBE VERY CAREFUL IF YOU USE THIS ONE:
DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.
How to enable or disable the real built-in Administrator account in Vista
http://www.Vistax64.com/tutorials/67567-administrator-account.htmlUse the Admin account hidden to lower your user account APPLY / OK then wear again to
ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
above message.You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
password (or two with the same password) use a test or difficulty to another.You can run the Admin account hidden from the prompt by if necessary.
This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxIf you cannot access your old account, you can still use an Admin to migrate to another (don't forget
always leave to an Admin who is not used except for testing and difficulty account).Difficulty of a corrupted user profile
http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspxI hope this helps.
-
user profile service service failed the logon.user profile cannot be loaded
everytime I try to log the error message above appears, as administrator of what s that keeps me from being able to try to solve
Hello
You can try to fix it with Safe Mode - repeatedly press F8 as you bootup.
Some programs such as the Google Updater (if you added the toolbar Google, Chrome or Google Earth) has been
known to cause this problem.How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.htmlHow to fix error "your user profile was not loaded correctly! You have been logged on with a temporary
Profile. "in Vista
http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.htmlBE VERY CAREFUL IF YOU USE THIS ONE:
DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrrups you are TOAST.
How to enable or disable the real built-in Administrator account in Vista
http://www.Vistax64.com/tutorials/67567-administrator-account.htmlUse the hidden administrator account to lower your user account APPLY / OK and then lift it to ADMIN.
This allows clear of corruption. Do the same for other accounts if necessary after following the above message.You can use the hidden - administrator account to make another account as an ADMINISTRATOR with the same password (or
two with the same password) use to test or difficulty of the other.You can run the Admin account hidden from the prompt by if necessary.
This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxIf you cannot access your old account, you can still use an Admin to migrate to another (do not forget to always
not that an Admin account that is not used except for testing and difficulty).Difficulty of a corrupted user profile
http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspxI hope this helps.
Rob - bicycle - Mark Twain said it is good. -
Original title: can't log on...
When I try to connect my computer at home, I get an error message that reads... "The user profile service service has no logon. User profile cannot be loaded. Can someone tell what is happening and how to fix...
Hi, Thunderrad25,
Are you able to get into Safe Mode? Try a system restore. Select a date prior to the incident happening.
These can be useful as well-
A temporary profile is loaded after you connect to a Windows Vista-based system
http://support.Microsoft.com/kb/947242
The user profile Service has not logon. View user profile cannot be loaded.
-
the user profile Service service has no logon failed to load the user profile
I received the following message when I try and log in my account to have:
The user profile Service service has no logon failed to load the user profile
What are my options?
Hello
1st thing to try is the system in safe mode restore to before the problem
http://www.windowsvistauserguide.com/system_restore.htm
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
- Select the Safe Mode option with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
If that does not solve it read more
read the tutorial below
When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:
The user profile Service has not logon. User profile cannot be loaded.http://support.Microsoft.com/kb/947215#letmefixit
Your user profile was not loaded correctly! You have been logged on with a temporary profile.
http://support.Microsoft.com/kb/947242
If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.
http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile
Maybe you are looking for
-
Film format compatible Ipod Nano 3rd generation
I tried to load purchased movies and videos on an old iPod nano 3rd generation (8 GB), but so far, all were rejected and unable to play or even synchronize. Could someone kindly tell me what file formats play on the 3rd generation iPod nano, and know
-
F20-137: TV Tuner does not work on MCE
I just purchased a Qosmio F20-137 and when I set up the TV Tuner (DVB - T) I had no problem. However when I try to watch TV on Media Center he frequently stutters and loses its signal (about once every 2/3 minutes). I tried a couple of different ante
-
All-in-one series 4500: 4500 shortcuts "printer" - padlocks on each watch envy
"Printer shortcuts" for this desire all-in-one show lock. What they mean and how do I get the lock?
-
How to release the FGV Instrument
Hello! I have a varaible gloabal funtional (FGV) (under LabVIEW teststand I call) who has an enum def of strict type with reading, writing, and closing. The initilizes is performed by a Boolean unitzilized shift register cheching if the vi initilized
-
Original title: Strongvault I want to remove the backup stongvault online. When I try to uninstall a pop up says if I want this program to make changes to this computer. What should I do?