Fixed value of the attribute

Similar Questions

• uniqueness of the value of the attribute on the multiple database

  Hello

  I ODSEE 11.1.1.7.2 on SLES platform version. My question is, I have two suffixes on another database on the same instance

  suffix: or = Org1, o = domain.com-> userRoot_Org1 (name of the comic)

  suffix: or = Org2, o = domain.com-> userRoot_Org2 (db name)

  I want to have a unique value for the attribute 'o' between these two suffixes. I created the following plugin but does not work... someone can help me?

  DN: cn = clientID uniqueness, cn = plugins, cn = config

  objectClass: top

  objectClass: nsSlapdPlugin

  objectClass: ds-signedPlugin

  objectClass: extensibleObject

  CN: unique clientID

  nsslapd-pluginPath: /opt/dsee7/lib/uid-plugin.so

  nsslapd-pluginInitfunc: NSUniqueAttr_Init

  nsslapd-pluginType: preoperative

  nsslapd-pluginarg0: o

  nsslapd-plugin-depends-on-type: database

  nsslapd-pluginarg1: suffix = "or = Org1, o = domain.com" \ ", = domain.com" ", = Org2, o = Org2, o is domain.com", "o = domain.com'

  nsslapd-pluginEnabled: on

  entryDN: cn = clientid uniqueness, cn = plugins, cn = config

  nsslapd-pluginId: NSUniqueAttr

  nsslapd-pluginVersion: 11.1.1.7.2

  nsslapd-pluginVendor: Oracle Corporation

  nsslapd-pluginDescription: enforce unique attribute values

  also tried the below...

  nsslapd-pluginarg1: or = Org1, o = domain.com

  nsslapd-pluginarg2: or = Org2, o = domain.com

  Hello

  Have you created this configuration manually in the directory configuration file?
  To avoid unnecessary attempts to specify plugin args, I would recommend using dsconf to configure the plugin as described in the https://docs.oracle.com/cd/E20295_01/html/821-1220/bcayb.html#scrolltoc

  Sylvain

  Please mark this answer as correct or helpful, when it is appropriate to make it easier for others to find

• Access policy - value of the attribute of provisioning failure

  Hello

  is it possible to configure a value for the attribute of non-entitlement to access policy applies to all users? I changed a strategy of access and successfully implemented a change in the rights of the system target, but did not at the disposal of another value of the attribute (by changing the form of target system in the definition of the access policy).

  Peter

  In this case, you will need to write your own custom code and need to trigger as an adapter of task of process or event handlers.

  ~ J

• How to see the values of the attributes of global context?

  Hi friends,

  There is a context (namespace) in DBA_CONTEXT and DBA_GLOBAL_CONTEXT. But it is not available in SESSION_CONTEXT and ALL_CONTEXT. (It is only on the schema in the instance).

  The context Type is ACCESSIBLE on a GLOBAL scale. My version of Oracle's 11g 2. Please help me to find the values of the attributes of the context. Thanks in advance.

  Try to use the GLOBAL_CONTEXT instead...

  See http://docs.oracle.com/cd/E11882_01/server.112/e17110/statviews_5126.htm#REFRN29087.

  Gerard

• selectOneChoice displays the first value of the attribute

  Hi people,

  In my demo application, there are a couple of selectOneChoice drop down LOV which are based on the query based VO. The UnselectedLabel property is set to "No Selection". These LOVs are used to filter the set of query data. When the drop down menus are not called and the push of a button, the LOVs, behind the stage, have the first value of the attribute that is assigned automatically. Is there a way to ciircumvent the issue without the implementation of valueChangeEventListener?

  Thank you

  udys

  udys,

  It's not like you have implemented correctly.

  1. the error message says:

  "The class"oracle.summit.selfservice.view.HZHRLocsocBean"does not have the property"vLocvalue"

  On the screenshot, it is clear that the name of the variable is "fromLovValue" and not "vLocvalue". Please make sure you use the correct name.

  Reference:

  Advice from the Oracle Johny: ADF: how to create SelectOneChoice based on values from a database table in the ADF Web Application

  See you soon

  AJ

• [ADF, JDev12.1.3] (How to set values for the attributes 1) to create a file and 2) committing to the database?

  Hallo,

  in my tables and forms (created from VO istances) there are some areas for which, insert and update, I calculate and set the value programmatically when a record is created or updated.

  In some cases, I put the necessary values using the 'CreateWithParams' in the workflow diagram...

  

  In some other ones, I associate an action, a bean, a created button drag-and - drop operation 'CreateWithParams' of the istance VO...

    public String cwpButton_action() {
      BindingContainer bindings = getBindings();
      OperationBinding operationBinding = bindings.getOperationBinding("CreateWithParams");
      // here I calculate and set the needed params
      // ...
      Object result = operationBinding.execute();
      if (!operationBinding.getErrors().isEmpty()) {
        return null;
      }
      return null;
    }
  

  And is ok if I can calculate the values for the attributes before a new record is created.

  But the approach that I have used to define the attributes (for new and updated records) whose value should be caluclated after the user has filled in the fields, before committing to the database?

  Thank you

  Federico

  Federico,

  Let me first tell you that our code is activity masking errors (the cache instead of working on them).

  1. If (! operationBinding.getErrors () .isEmpty ()) {}
  2. Returns a null value.
  3. }
  4. Returns a null value.

  This means that you do not check the errors at all. You must at least print a log with the error message, you receive, if you get one!

  To solve your problem, you override the method prepareForDML() of the entity or entities in question. You can calculate and set the necessary attributes until they get engaged in the doDML(). Do not use doDML() because it is too late in the life cycle.

  Timo

• How to set the default value of the attribute with a sequence number? Is it possible to add a string to seq.no. like abc0001?

  Mr President.

  How to set the default value of the attribute with a sequence number? Is it possible to add a string to seq.no. like abc0001?

  Concerning

  For the date, you can use groovy expression adf.currentDate to set the current date. reference http://adfgouravtkiet.blogspot.in/2012/11/how-to-set-default-values-for-entity.html

  You already have ways to use the sequence.

  How do you add a new value in the form. You're creating a new line of your page (user interface) and by engaging with validation operation? Unless you commit you will not be able to see anything in the table.

  Thank you

• How to disable Lov when the value of the attribute is NULL at the level line

  Hi all
  
  JDev 11.1.1.5.0
  
  I have a view as a table ADF jsff page object. Value of the attribute in a row may have null values.
  And I want that Lov must be disabled when the value of the attribute in the row is null or not.
  So please suggest me how can I implement this.
  
  Kind regards
  Marie-Claude

  Set to the disabled for LOV attribute property

  disabled="#{bindings.YourAttribute.inputValue eq null}
  {code}                                                                                                                                                                                                                                        
  

• Time Dimension type to different values in the attributes - Bug or feature?

  Not sure if this is a bug or a feature.
  
  But if there is a time dimension hierarchies. You have the option of specifying different values for member attributes in different hierarchies.
  
  For example.
  
  A hierarchy has MIN_ID for its members and uses MIN_END_DATE for its end_date
  
  Hierarchy B has MIN_ID for its members and uses SESS_END_DATE for its end_date
  
  According to this message and a comment by David Greenfield:
  
  Gender issue when several mappings for different hierarchies
  
  "You try to map the same attribute, SORT, on different columns in two hierarchies? In other words, what do you expect the same Member to have different values for the attribute in the two different hierarchies? If so, then this is a problem because a member must have the same value for the attribute independently of the hierarchy. »
  
  Unlike a dimension of the user, a time dimension seems to allow this and it seems to work as expected. Behavior in this case is the difference between a user and the time dimension?

  Your description of the structure of the dimension is very clear, but I have a question about system requirements. When you say you want to the time running from 17:00 to 16:59, do you mean that the calculation must spand day? for example "5:00 PM: Jan 1, 2012" to "4:59 PM: 2 Jan 2012".» If so, then this you is impossible by making a loop only the dimension of time-seconds. Or do you really mean it must wrap around the same day. for example "5:00 PM: Jan 1, 2012" at "11:59 PM: 1 Jan 2012", then again to "00:00 AM: 1 Jan 2012" to "4:59 PM: 1 Jan 2012"?»»»

  If you want the calculation for the period of days, then I think you need to spend TIME on the DATE dimension level. You can leave some MINUTES in the second dimension, which can be a dimension of standard user. You must then two levels of the DAY (with different members) in the date dimension - each with a different set of the child. You can assign the TIME_SPAN to the TIME level 1.

• Default value for the attribute transient

  Hello
  
  I use jdev 11.1.2.2.
  
  I have added a transitional attribute to the view object.
  
  I added a adf.context.securityContext.getUserName () default value to the attribute.
  
  Since I gave him in default value display only during the Insert to create operation.
  
  But I want that it always shows the value.
  
  How can I do?
  
  
  Thank you and best regards,
  Rakesh

  The attribute can is "always"?
  Also adf.context.securityContext.userName as the default value Expression with recalculate "Always" should work fine.

• get the value of the attribute of Advanced Table & set

  Hello
  
  I am a beginner in the OPS, that's why your help is very appreciated. _
  
  
  Can one advice me please how I can get and set values for the attributes in Advanced Tabel.
  
  I have an advanced array (dtls_advance_tbl) that contains 5 columns and I want to get the value of the attribute (class_1) and change the value of the attribute (class_1_image) on this basis.
  
  Please advice the code and what class / method I have to write it (I mean it is in the controller / VOImpl)?
  
  Thanks in advance.
  
  Kind regards... Ashraf

  No ok ok, so no need to go to rowreference or PPR.

  change the code below and the writeh in the PR of the extended controller method

  OAViewObject vo = (OAViewObject) getEmployeeSummaryVO1 ();
  Line EmployeeSummaryVORowImpl = null;

  This tells us the number of lines that were recovered in the
  Rowing together and away the extra lines as some of the
  other methods 'get County '.

  int fetchedRowCount = vo.getFetchedRowCount ();

  We use a separate iterator - even if we could scroll the
  the lines without it - because we do not want to influence the currency of the line.

  RowSetIterator deleteIter = vo.createRowSetIterator("deleteIter");

  If (fetchedRowCount > 0)
  {
  deleteIter.setRangeStart (0);
  deleteIter.setRangeSize (fetchedRowCount);

  for (int i = 0; i)< fetchedrowcount;="">
  {
  line = (EmployeeSummaryVORowImpl) deleteIter.getRowAtRangeIndex (i);

  For performance reasons, we generate ViewRowImpls for all
  Objects in view. When we need to get an attribute value,
  We use the accessors appointed instead of a generic string search.

  Number primaryKey = (Number) row.getAttribute ("EmployeeId"); / / Get two rows here at a time when you want to compare

  Number primaryKey = row.getEmployeeId ();

  If (make the comaprison here)
  {
  write your logic here
  break; only one selected line in this case
  }
  }
  }

  deleteIter.closeRowSetIterator ();

  Thank you
  Pratap

• Process command API, update the value of the attribute FDF

  I use oe_order_pub.process_order to create a return order and as part of the logic that I need to fill attribute FDF, I see that value is updated in their respective fields once return order is created by API, when question and check the backend, I see the value of the attribute in the field. But when I check since before its is not visible in the field.
  
  Once I have change the value of the attribute of front end is visible, my question is why is not visible after API has created the return order.
  
  Attribute is a Date field and we have defined it for use the FND_DATE4 value in the configuration of the FDF, we in R12.
  
  Appreciate your help on this.
  
  Thank you!
  
  Edited by: User910243567 Sep 26, 2011 08:54

  Hello

  You update OE_ORDER_HEADERS_ALL. field of CONTEXT in your script to update the attributes? If you did not update that or somehow that's getting updated with null, then you won't be able to see the attributes of the front. Let me know.

• Support of the value of the attribute?

  I would like to do something in RH8, but I don't see a way. Perhaps through variables defined by the user, but I don't really see how the variables much more than excerpts. Conditions do not seem to apply here either. I would like to define a global attribute, such as 'product '. Then, the attribute would have different values: 'ProductA', "ProductB", etc. Then, I would apply the attribute to the different topics, by selecting different values for each theme. At the end of the day, I would insert a snippet or a variable at the top of a topic, which says: "applicable products:"x, y, z"."x, y, z"would be a list of products, this section applies to.» This list may change over time, but instead of manually update the topic, I would just update the values for the attribute 'Product' section, and the snippet in the topic would update itself. Any ideas?

  Thank you. It seems that I posted this in the wrong category, so I'll mark this one as "answered" and re-post in the right place to see if I get more suggestions. I apologize for the confusion.

• Cannot retrieve the value of the attribute by using ExtractValue

  Hello
  can't extract the AddressDetails accuracy value using the following syntax:
  
  SELECT extractValue (VALUE (r), ' / answer/cue [1] / Point/coordinates ", namespace),
  extractValue (VALUE (r), ' / Response/Placemark[1]/AddressDetails/@Accuracy', namespace)
  IN coordinates,
  precision
  TABLE (xmlsequence (extract (' geocode_xml, ' / kml/response ", namespace))) r;
  
  
  namespace: = 'xmlns = "http://earth.google.com/kml/2.0" ';
  
  <? XML version = "1.0" encoding = "UTF-8"? >
  < kml xmlns = "http://earth.google.com/kml/2.0" >
  < response >
  < name > 333 THIRD AVE, ANYTOWN, ST 99999 < / name >
  < status >
  < code > < code > 200
  geocode < application > < / request >
  < / status >
  < benchmark id = "p1" >
  < address > 3rd St, Anytown, St 99999, USA < / address >
  < AddressDetails precision = "6" xmlns = "urn: oasis: names: tc: ciq:xsdschema:xAL:2.0" >
  < country >
  < CountryNameCode > U.S. < / CountryNameCode >
  < CountryName > USA < / CountryName >
  < AdministrativeArea >
  St < AdministrativeAreaName > < / AdministrativeAreaName >
  < SubAdministrativeArea >
  < SubAdministrativeAreaName > some County < / SubAdministrativeAreaName >
  < location >
  < LocalityName > any city < / LocalityName >
  < artery >
  < ThoroughfareName > 3rd St < / ThoroughfareName >
  < / artery >
  < ZipCode >
  < PostalCodeNumber > 99999 < / PostalCodeNumber >
  < / code >
  < / location >
  < / SubAdministrativeArea >
  < / AdministrativeArea >
  < / country >
  < / AddressDetails >
  < ExtendedData >
  < LatLonBox = "46.5846776" North South = "46.5783824" is = '-112.0202820"West ="-112.0366410"/ >
  < / ExtendedData >
  < point >
  coordinates of <>- 112.0281180,46.5815400,0 < / data >
  < / point >
  < / mark >
  < / answer >
  < / kml >
  
  
  Thanks in advance for the help!

  You have the part of the question of the namespace which tends to travellers to the top, but you missed the fact that AddressDetails is in a different namespace (default).

  Here is an SQL statement, with all hard-coded, which returns the value of the attribute you need. I had to add the namespace prefix so that the parser know which namespace of each element was.

  SELECT extractValue(VALUE(r), '/Response/Placemark[1]/Point/coordinates', 'xmlns="http://earth.google.com/kml/2.0"'),
  extractValue(VALUE(r), '/ge:Response/ge:Placemark[1]/oa:AddressDetails/@Accuracy', 'xmlns:ge="http://earth.google.com/kml/2.0" xmlns:oa="urn:oasis:names:tc:ciq:xsdschema:xAL:2.0"')
  FROM TABLE(xmlsequence(extract(XMLTYPE('
  
  
  333 THIRD AVE, ANYTOWN, ST 99999
  
  200
  geocode
  
  
  3rd St, Anytown, St 99999, USA
  
  
  US
  USA
  
  St
  
  Some County
  
  Any Town
  
  3rd St
  
  
  99999
  
  
  
  
  
  
  
  
  
  
  -112.0281180,46.5815400,0
  
  
  
  '), '/kml/Response', 'xmlns="http://earth.google.com/kml/2.0"'))) r;
  

  Note: If you are on a version that supports XMLTable, I suggest to use. Easy to use, especially if you are using the COLUMNS option to pull data as fields then you need not to use extractValue in the SELECT part. I just made an example on {message identifier: = 3646323}

• ring, value of the attribute

  I want to replace the strings of the label of the ring (value/label pairs) after starting the program with the strings extracted from the Excel worksheet or a text file. I know how to implement this part but I do not know how to set the label with the command of the attribute. I found the command to set the label of the ring, but I want to change the label value/label pairs so that the user can change them according to the names of devices:

  Value label

  1 Device1

  2 Device2

  3 Device3

  Thank you for your help.

  Leszek

  Hello

  Take a look at InsertListItem (), ReplaceListItem () and DeleteListItem ().

  Good luck

  Wolfgang