Fixing a malfunction of the h6 and g5
Someone at - it advice or help on how to fix the malfunction of the notebook when when typing g I get automatically: g5. Or, when you type: I receive: h6. ??? Help, please. In addition, when you type h and capital g I get: H ^ and g%.
The most likely answer is that you want to hear: they keyboard is damaged and must be replaced. As it is a laptop, contact the manufacturer for an authorized repair center. I hope it's under warranty. Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org
I use Frame 8. When I try my book to PDF, Frame crashes. I tried PDFing the individual chapters, but that did not work.
Also, I'm creating a cross reference or hyperlink. I have a paragraph that says "For more information, see the configuration section in Chapter 1" the section of the configuration in Chapter 1 is a heading 4. I tried following the instructions using Frame, but I'm not and I don't know if I need a hyperlink or a cross-reference. I can't more simple explanation and instructions?
Several things could be the cause of the crash during the PDF creation process.
1. have you applied the MS fix mentioned here?
2. in the configuration of your PDF, make sure that you have PDF containing the tag off and in the links Panel, select "Create named Destinations for all paragraphs".
Try again and also make sure that you have applied all the FM8 patches in sequence.
You can use either references or hyperlinks to create jumps, although cross-references are easier to make and maintain.
1. to insert a cross-reference to the Configuration section of Chapter 1, you first need to open Chapter 1 as well as the document on which you are currently working.
2. in the location where you want to insert the cross-reference, select the special > cross menu option.
3. for the first time that you use a cross-reference, you create a format for it. In your case the "for more information, see the" and "article in" are constant strings and the name of the section "Configuration" and "Chapter 1" variables are. ".
(a) click on the button "Edit the Format" in the reference section to the bottom of the window. This will open a new dialogue window allowing you to create a format to use.
(b) in this window, name the format so that you can identify it easily, such as 'More info in the section of chapter'.
(c) then you need to enter the line of 'Definition' of what you want the cross-reference to say, that could be (without the quotes) "For more information, see the section of <$paratext>in <$paranum[Chapter]>." Items in brackets are building blocks used by FM to pick up the content of the destination that is specified when you perform the cross reference. The first a <$paratext>States to retrieve the content of the paragraph which you point to (in this case it should be "Setup" title. The <$paranum[Chapter}>item will enter the value tag chapter AutoNumber (or whichever one you have for numbering at the beginning of each chapter of the chapters).
(d) once you are satisfied with your format, click Add, and then made some buttons. This will save thgis format in the catalog of cross-references.
4. to actually insert the cross-reference, select the target document (for example chapter 1) in the drop down menu to "document:
5. then in the Source Type (arrow downwards below the Document), make sure that you have selected paragraphs.
6. in the left column, you will see the paratags available in the document of the chapter 1.
7. Select the paratag type that contains the configuration section title (heading 4?).
8. in the right hand column you should see all the tags heading 4 Chapter 1.
9. Select the configuration of this column.
10. check the Format line indicates that you created earlier ("chapter details in the Section"), and then click the Insert button.
You are finished.
If you don't like the formatting or he takes the wrong content, then reopen dialogue cross references and change the format to get what you want.$paranum[Chapter}>$paratext>$paranum[Chapter]>$paratext>
I use the master password &; if I change the passwords on a site, he doesn't want to "change" also does not ask 'to remember' with new usernames/passwords. No one knows how to fix this or add the usernames and passwords on password stored in Firefox pa
Firefox (I think version 5, maybe 4) does not ask "remember" passwords more or he asked to "change" a password when I did. He asked when I changed my Facebook password and I have to log in every time so I removed my user name and password for FB on the page of "saved the password" of Firefox. When I didn't do this before, he asks "remember" but doesn't work anymore. I use a master password.
Make sure that you are not Firefox running in permanent private browsing mode.
To view the history settings and cookies, choose:
- Tools > Options > privacy, choose the setting Firefox will: use the custom settings for the story of
- Uncheck the box:  "always use the navigation mode private.
The Web site may use autocomplete = off to prevent Firefox to record the name and the password.
You can remove autocomplete = off with a bookmarklet to register the name and the password of Firefox.
Please tell me how to solve the problem with a laptop. I have HP Pavilion g6-2320er (A6) and on the Windows 8 operating system. For a year this laptop works well (from the date of purchase spent more than a year). Warranty expired in August 2014. (At the time where the warranty is not performed). The problem is that the laptop started to overheat. It just stops. I started to wear better past to ventilation air. But now it starts to stop frequently and even after the easy way, when turned, gives me a strange message: «the system has detected that a cooling fan does not work correctly...» Continued operation is not recommended and can result in unpredictable behavior that may cause system damage possible random stop. The system will stop in 15 seconds. To prevent stop and continue the operation... "Of course, I understand the general meaning. But what is the reason for this 'fan' work and what to do more of what's going on? Will pay for cleaning or even what options are there? Tell me, please...
If say you that the fan does not work, make you more attention. Heat will kill a computer more than anything else. The computer is in itself to protect its components before it is cooked. Not just a matter of cleaning, the fan must be corrected or modified. Take it to a repair shop, if you are unable to fix it yourself.
If you don't fix it, you have to buy a new computer.
Hello! Can anyone help me in this state of EtreCheck to understand what I need to do to improve performance with my MacBook Pro? The computer is slow to respond after the computer starts. Apps are also slow to load. Once I have apps open, the speed is satisfactory. It just seems to have the hiccups a lot just to get there.
Good advice is greatly appreciated! Thank you in advance.
EtreCheck version: 2.9.13 (267)
Report generated 2016-08-05 07:36:41
Download EtreCheck from https://etrecheck.com
Click the [Support] links to help with non-Apple products.
Click [details] for more information on this line.
Problem: Computer is too slow
Computer takes a long time to adjust after the start, apps to take a while to load.
MacBook Pro (13-inch, mid 2009)
MacBook Pro - model: MacBookPro5, 5
1 2.26 GHz Intel Core 2 Duo CPU: 2 strands
2 GB RAM - Insufficient RAM! Extensible - [Instructions]
ok 1 GB DDR3 1067 MHz
ok 1 GB DDR3 1067 MHz
Bluetooth: Old - transfer/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Battery: Health = Normal - Cycle count = 260
NVIDIA GeForce 9400M - VRAM: 256 MB
Color LCD 1280 x 800
OS X El Capitan 10.11.6 15G (31) - since the start time: about an hour
Hitachi HTS545016B9SA02 disk0: (160,04 GB) (rotation)
EFI (disk0s1) < not mounted >: 210 MB
Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB
Macintosh HD (disk 1) /: 158,81 (Go 130,18 free)
Encrypted AES - XTS unlocked
Storage of carrots: disk0s2 159.18 GB Online
Built-in ISight from Apple Inc..
Card reader Apple
Apple Inc. BRCM2046 hub.
Apple Inc. Bluetooth USB host controller.
Apple Inc. Apple keyboard / Trackpad
Computer, Inc. Apple IR receiver.
Mac App Store and identified developers
[loaded] 7 tasks Apple
[loading] 156 tasks Apple
[operation] 56 tasks Apple
[killed] 18 tasks Apple
18 killed processes lack of RAM
[loaded] 49 tasks Apple
[loading] 150 tasks Apple
[operation] 82 tasks Apple
[killed] 10 tasks Apple
10 killed process lack of RAM
[failure] com.adobe.fpsaud.plist (04 / 04/2016) [Support]
[failure] com.mackeeper.MacKeeper.Helper.plist (2015-04-21) [Support]
[loading] 401 tasks Apple
[operation] 153 tasks Apple
[killed] 27 tasks Apple
FlashPlayer - 10.6: 126.96.36.199 - SDK 10.6 (2016-04-12) [Support]
QuickTime Plugin: 7.7.3 (2016-07-08)
Flash Player: 188.8.131.52 - SDK 10.6 (2016-04-12) obsolete! Update
Default browser: 601 - SDK 10.11 (2016-07-08)
OfficeLiveBrowserPlugin: 12.3.6 (2013-05-02) [Support]
Silverlight: 5.1.41212.0 - SDK 10.6 (2016-02-07) [Support]
iPhotoPhotocast: 7.0 (2011-12-04)
ZoomUsPlugIn: 3.5.44022.0314 - SDK 10.11 (2016-03-16) [Support]
Adblock more - Eyeo GmbH - https://adblockplus.org/ (2016-08-04)
Flash Player (04 / 04/2016) [Support]
Time Machine not configured!
37% com.apple.WebKit.WebContent (3)
Kernel_task 303 MB
Com.apple.WebKit.WebContent (3) 193 MB
Safari of 174 MB
Mdworker (9) 115 MB
Mds_stores 92 MB
31 MB of free RAM
2.22 GB RAM (354 MB cache) used
68 MB used Swap
5 August 2016, 06:28:45 self test - passed
Simple enough: get more RAM. And delete malicious software MacKeeper.
I tried many solutions being posted in the support forum. I went and deleted my places.sqlite file so that it has created a new profile. I tried to restore my favorites, and nothing happened.
I went and found out that I had a places.sqlite.corrupt file. As suggested by one of links provided in other articles, I removed the other places.sqlite files and then renamed just corrupt as places.sqlite. I restarted firefox and still nothing.
Please do not just copy and paste the links to two articles that helped me not yet. I need to know how to solve this problem, because I had a lot of important information in my favorites!
You should not copy places.sqlite, if you had problems with the history or bookmarks.
You need to restore from a backup bookmarks JSON in the bookmarkbackups folder has all of your bookmarks.
Since then tried IE9 and uninstall I find that my calendar gadget is light orange and my invisible stocks gadget. I tried all the patches on this forum. Any new ideas?
There are many tutorials on the sidebar.
And here's one:
How to restore wWindows Sidebar
Here's one specifically on the calendar:
Here is a response from Aaron, Microsoft Support Engineer
Oepn an elevated command prompt. To do
then, click Start, click programs, accessories principally made, right clickguestand then click run as administrator.
Type the following command and press ENTER:Regsvr32.exe
You should see the following message after running the command:
DllRegisterServer in vbscript.dll
Out of the Windows Sidebar and re - open
Once again. To exit Windows Sidebar, right-click on the Windows Sidebar
Notification icon and choose exit.
If this does not help, restart Windows and see if the calendar Gadgets make properly.
-In addition, if necessary, please test this under an alternate user account.
Well, I played recent MMO and to do this, I had to update my sound drivers and graphics. I managed to finish my first uninstall all the old drivers-flawless and it worked perfectly thereafter with no video issues (that I had before the uninstall, but nothing harmful to the system). Eventually however, I started to get some pop ups Windows 2008 C++ REDIS saying that atieclxx.exe had asked to be terminated in an unusual way. No problem, I close the error message and everything always works as it should. No random crashes.My problem is that wermgr.exe (I am fairly certain that this is the title, but I did not work right now), began leaving me with a black screen and the cursor when I connect. In most cases, I can open the Task Manager by pressing Ctrl + Alt + Delete, however, it sometimes won't start, and when I start to kill unnecessary tasks, they take some time to die. I know that black screens are often a defective start of explorer.exe, which manages office and file, browsers so I use the Task Manager to run it and it dies or continues to do nothing without making the office. Whenever this happens, wermgr.exe was running (Windows error handler). When I kill this task, which often has duplicates, I can finally get explorer.exe to load. I have the same problem with safe mode, except that the display shows the version of windows and the details in each corner until explorer.exe load finally. I've also had freezing issues long whenever Werfault.exe jump upward and the only thing that those fixed has been disable Werfault.exe in the services menu.It is clear to me that the windows error reporting programs consume a lot of the capacity of the CPU of my computer and they are probably the source of the biggest problems I'm having. I should stop start, or they are just neutral, awakened by a bigger problem?On a smaller note, C++ error is probably due to me not having is not the correct edition of the redistributable C++ installed, or perhaps too many distributions. The last edition, I have installed is 10.0.40219 of the x 86 and x 64 redistributable and runtimes (2010). Are the oldest, I installed some updates ATL and 5 2005 Redistributable (2 x 64 versions). Atieclxx.exe is the program having the pop-ups demand 'unusual termination. " The version of my ATI Radeon drivers are included in Version 2012.1116.1515.27190 of the AMD VISION Engine Control Center.Now, finally, I think it's useless, I'll give you my specs:OS: Windows 7 Home Premium, 64-bitProcessor: AMD Athlon TF-20, 1.60 GHzRAM: 3.00 GBModel: Acer Aspire 5534BIOS: InsydeH2O V1.12Graphics card: ATI Radeon HD 3200, using aticfx64.dll and aticfx32.dllI do not believe that a reinstallation is necessary, because I got my computer in good enough condition that I can write this message and use it as usual, however, it's a nuisance to do, because it requires waiting a few minutes while the wermgr.exe process is stopped by the Task Manager.
HiJack This help "fix selected", I removed the SmartShopper and BHO entry no name, as well as a few more suspicious looking files and those to the left of the old installs (windowblinds). I also deleted all entries in ø16 because I didn't need them and didn't like their operation. Then, I deleted two mistakes of R3, who looked extremely suspicious.IT'S FIXED NOW!I restarted and connected to be greeted with my office. The second csrss.exe is still underway, and atieclxx.exe works well as well. Although they appear to be the cause of the problem, because I am intimately familiar with the process of my computer, it is also clear that many of the comes from problems of registry and the programs that I have only half managed to uninstall. I hope this helps people to the problem in the future, and if my problem recur soon, I will return to this article with more information.As a final note, I was extremely impressed with HiJack this, because I used it for the first time in order to solve this problem. He kindly explained to me why he alerted me and what kind of problems listed that would cause a lot of things helped me to decide what to remove. Now I know why divert this is recommended everywhere on the internet as a diagnostic tool.To not appear as an advertising bot, but it's the tool that solved my problem for this, I have it suggests. in any case, good luck and I hope you can fix this problem yourself. With the help of google, an open mind and careful decision making, it is possible to solve anything. I do not recommend using a shotgun to do so ;)
For the second time in two months, all my messages in the Inbox are not there. Only the SUBJECT and the FROM is left.
Tried to 'fix this folder' and ALL - lost ALL the Inbox.
The file is still there and works well...
How can I stop it and what are the causes?
Thank you all, Gabe
If you have the file somewhere on your hard drive, export and import tools it will be important back to Thunderbird.
My Apple TV will sporadically lose access to my iTunes library (despite showing the connection and a signal strong) and Netflix will not play. My tint lights are not recognized when this happens. When I restart the AppleTV, then it shows that they are not connected to the internet. However, my computer and the phone still have functioning wifi in these proceedings.
The only thing that seems to restore connectivity is when I unplug my Time Capsule (version 7.7.7) and then plug it back in. Can anyone offer solutions and the potential causes?
Thanks in advance for your time and help, it is greatly appreciated.
I don't have a simple answer to why not a quick fix to fix things.
There are plenty of things you can try. None are guaranteed to fix things... but he is able to increase your blood pressure and make that upset you.
Then. I need more information.
What ISP modem or router do you use? Brand and model please.
Who is the provider?
How did the TC connected to it? What mode it's in, bridge or router?
Is the wireless on the ISP router turned on?
You have an excessive number of routers wireless around you?
Use diagnostics wireless on a computer to check.
You never reset the TC at the plant after the update of the firmware?
If this isn't the case, please do so now. Redo the installation in accordance with the following instructions.
Universal factory reset
Turning off the TC... That is, remove the power supply cord or the power at the wall outlet, wait 10 seconds... Hold the reset button... be nice... Turn on always even now in reset... and keep holding in for another 10 seconds. You may need assistance because it is difficult to hold in reset and power on. It will show the success quickly flashing led front. Release reset... and wait a few minutes for the TC to reset and return with the factory settings. If the front LED flashes quickly you missed and simply try again. The reset is quite fragile in these... Press the key while it is just click away and not more... I've seen people bend lever or even break. I use a toothpick as a tool.
NB. None of your files on the hard drive of the TC are removed... This simply clears the settings of the router of the TC.
The installer the TC.
And then redo the configuration of the computer with Yosemite.
1. the use of very short names... NO APPLE RECOMMENDED names. Without the space and pure alphanumeric characters.
for example TCgen5 for the base station and the name of the TCwifi wireless. (try to keep names < 10 characters)
If the problem is using wireless TC24ghz and TC5ghz with fixed channels like this helps.
2. use all passwords also consistent with 1. but maybe a little longer. IE 8 and 20 characters of mixed cases and numbers... no alphanumeric non-caracteres.
3. If the TC is router, you can ignore this point. It is only a problem when the TC is bridged.
If ensure that the TC is always the same IP address... you will need to do this on the main router using a dhcp reservation... or a bit more complex setup by using the static IP address in the TC. But it's important... the IPs derived in all directions when Yosemite do not remember his name for 5 min after a reboot done for poor network management.
I highly recommend this method on bridge of situation where you have the ISP router.
4. Please tell us if your ISP is now using IPv6 as who introduced a new set of questions.
Whenver firefox is reloaded, my home page is the default and my tabs from my previous session are busier, yet my app tabs are still there.
I change these settings in Options > general every time I load firefox and nothing works
Try this article...
15.0.1 Mozilla gets stuck. You click on the links and nothing happens. No wheels spinning, nothing. I open Firefox in a new window, the same thing. I can fix it onl
15.0.1 Mozilla gets stuck. You click on the links and nothing happens. No wheels spinning, nothing. I open Firefox in a new window, the same thing. I can only fix it by starting the Task Manager and close all Firefox Windows. [When I launch Internet Explorer, there no problem.] Thanks for your help!
Clear the cache and cookies from sites that cause problems.
"Clear the Cache":
- Tools > Options > advanced > network > content caching Web: 'clear now '.
'Delete Cookies' sites causing problems:
- Tools > Options > privacy > Cookies: "show the Cookies".
Start Firefox in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance/themes).
- Do not click on the reset button on the start safe mode window or make changes.
I want to update Firefox, but fear that it will not be safe to go if the AVG Safe Search is disabled. How serious is there that and you know if a fix will be provided by you or AVG provides a fix?
See this AVG: rest assured that you are always protected by AVG, even if you have already upgraded to Firefox 6.0. The AVG Active Surf-Shield component is still checking all the data and you will prevent access to malicious content, even if the icons verdict search results is not available temporarily.
I downloaded Itunes 12.3.3 and now I tunes does not recognize my Ipad or Iphone. I went through all the procedures and just uninstall and reinstall. Please fix 12.3.3.Thanks.
I downloaded Itunes 12.3.3 and now I tunes does not recognize my Ipad or Iphone. I went through all the procedures and just uninstall and reinstall. Please fix 12.3.3.Thanks.
My iPhone 4 stopped working yesterday, it frustrated me because I just a call, I intended to take it to get it fixed, but my sister advised I check the support of the community and guess what? It worked! Am so excited, that I followed the instructions of
My iPhone 4 stopped working yesterday, it frustrated me because I just a call, I intended to take it to get it fixed, but my sister advised I check the support of the community and guess what? It worked! Am so excited, I followed the instructions of the Mac, I pressed the Start button and the button operation at the same time and the magic took place, am so so excited. THANK YOU MAC!
Glad that your phone is working again.
What you were doing by pressing the button home and sleep for 10 seconds, until the Apple logo came back, is called "force restart '.
You won't lose data by doing this, but it can cure a few glitches. It is usually the last thing to try before you restore the phone to factory again or visit an Apple Retail Store or Apple authorized service provider, where your phone does not at all.
Maybe you are looking for
How to upgrade to iOS 10 on Ipod touch?
Hello I had a big problem with my L450 D and was advised by the provider of the guarantee to use the product recovery disc. I did it but I can't pass the following command: x:\Windows\System32 > Can someone tell me what this means and how I can get p
Hi, I have a big problem with OS X El Capitan 10.11.3. I used to have a Windows partition with bootcamp which I deleted via bootcamp, but it crashed. I lost all my partitions and even os x. I have therefore started in recovery mode and launched disk
I spilt tea on my trackpad, a few drops was on the keyboard, I cleaned up the trackpad with the fabrics directly, then I used wet wipes to clear something then still tissue leftnow using the mouse pad goes upwards or downwards only, cant go right or
SYSTEM DISABLED CODE IS (92792464)