Fixing headphone jack, or use another thing?

1. Compaq CQ2014 desktop computer; 2 Win7 Home Premium 64; 3. no; 4. transfer data (not Windows system) to old hard drive.

Our front headphone jack seems to be broken or defective. Several headphones connected that barely register in the Realtek HD Audio Manager included console, or not at all; When they work, the sound is either in the left ear only, or mono. Before USB plugs and connections in the back seem OK.

Saw the Microphone/headset combos which plug into USB (~ $ 22)... that would be compatible with the Realtek system? Alternative seems to be the entire Tower shipped for warranty service in another State that would take days, after we have already lost some weeks that followed the disaster with the old computer which requires obtaining of it.

Hello

In my view, the replacement of the FRONT plug is a piece of cake. BACK is sloldered to the motherboard, but the front is not just the cables and the plug itself (unless the case is a fantasy).

Good luck

Tags: HP HP Desktops

Similar Questions

  • You can use a headphone jack as a Mic In on iPhone

    Hello!

    You can use a headphone jack as a Mic In on iPhone? I need an external MIC for video production...

    Thank you!

    N ° however, headphones with microphone and the proper plug on the headphones provided with it, then you can use this microphone. You might associate your own plug, taking care to use tape appropriate to connect the microphone during the deactivation of one for the headphones. Don't forget the microphone you are using matches the impedance of the microphone of the device.

  • The Sansa View headphone jack repair

    How to fix a headphone jack for listening to Sansa View problem

    I bought a refurbished Sansa View 8 GB a while back for $60 at a hypermarket on the local computer and
    It came with a political guarantee of 60 days and 30 days of return of the store.  I liked the view better
    only the rocket and the Clip, they had for similar prices because of the larger screen.  At the time I'm not
    know that Sandisk has been gradually the support of support for new players, or about the
    others have had to problems.
    On the second day, I had the player, I noticed that the headphones were not playing both
    channels correctly, and if I shook the card he got much louder.  I could the deal and he would play
    good for awhile and then a channel would cut out randomly.  After some research, I found that
    others have had the same problem.  I tried to return it, but somehow, I had lost the hardback cover
    that describes the product and contains the chisel, and they could not return.  They would have
    I would like to swap with someone else and his sleeves to return the original unit, but they sold the
    them and never got over.  I think I was about $ 60 at that time here, so I went
    back line for further research.  I found a guy on this forum who had disassembled one, therefore, using
    his instructions (with some modifications), I took mine hand, found the bad soldering and fixed
    them.  Here's how:

    1. use a PIN or sharp knife to release the tiny connector black rubber that covers the screw
    It must be removed to open the case; It is located to the right of the usb plug (ahead of)
    Reader).  Put the CAP and the screws that you remove so later in a small Tupperware
    you do not lose them.
    2. remove the screw, with a very small phillips head of a glasses or a good game repair kit
    precision screwdrivers.
    3. the bottom right corner should now be free; Remove the plastic cover of metal
    Basic it and work slowly around the case counterclockwise, separating the nail of the thumb
    If you're going to.  You may need to use a tiny flat head to press the strips in transparent plastic
    which become visible when you move along the line of separation.  Take your time in order to not break
    no label.  Finally you get to the last tab in the lower left corner of the headphone jack.
    This is where I had my only problem.  Other blogs say to lift a lever to more
    release this tab; I found that nothing seemed to free him and after several minutes of
    soft eyes I broke something and it came loose.  I think it was super-colle in place!
    4. I didn't take away the little water that connects the encoder in the Council, because it is very
    difficult to re - install these things, so just press the cover of how to get to the screen and
    Live PC.  There are 2 tiny black screws holding the display remove them and
    equivalent it loose, leaving the attached ribbon cable again
    5. now you can see the battery; out of its niche and disconnect the 3 tiny dumb son.
    Nector and set it aside.
    6. push the lid, so you can see the 3 tiny black screws holding circuit board printed; delete
    them (the last is difficult to see, it's in the corner to the right of the headphone jack).  Equivalent
    the Platinum (the cursor for the power switch appears immediately switch).  You should now be
    looking at the empty metal casing and the display, printed circuit board and a plastic cover should
    all be loose, but still connected by two ribbon cables.  In the Tupperware you
    should have 1 small black cap, 1 small silver screw, 5 small black screws, the slider switch.
    and the battery.
    7. I now inspect the plug welds helmet, and it was very obvious that 2 of
    the legs were loose, probably because of not enough solder on them.  I warmed up a little
    flat-head screwdriver precision with a mini torch and has used and very fine electronics
    welding to weld safely.  After a thorough inspection of the other joints, I decided to leave
    alone because they looked OK.
    8. I now plugged the battery and booted up the test before I re-assembled.  Both
    channels played now, but I've always heard some static when you turn the CAP.  I have fig-
    measured, it was normal in my experience with small electronic devices, so I assembled the player
    and more broadly, tried using headphones and a cable to connect to my receiver.  He
    now worked better, but still had some problems with making good contact.  Now at least I can
    He lay and he will play both channels indefinitely.  I think that the problem is related to the
    bad quality of decision-making.
    9. I'm going to use it at work for a while with my powered speaker system and see how it
    works.  In the future I will try to clean the plug with the electronic device, and if that does not work
    help can I go back in and try a few welding more or contacts inside making bending.
    Worst case I might have to find a plug of new, high quality and weld them, hoping that I don't fry
    whatever it is the heat.

    So repair all taken only an hour (excluding research).  I now have the confidence to
    Difficulty everything that can go wrong in the future.  I could swap the battery in 10 minutes and I
    hear they are only about $20, so I could keep this thing going for years.  I went from $ 60
    brick for a machine that could last a long time.  I wouldn't buy a Sansa View,.
    But if you have already, I sincerely hope that this information will help to...

    It's my last update to my problem of current headphones.  The view is now fixed; Although having a few changes

    appearance.  It now sports an inch and one-quarter long cast taken helmet hanging out where the taking of origin to reside.  You can laugh now, but not for too long, because this thing is perfect now!  The repair is also robust enough to

    Use it as a portable device (carry in your pocket or other) without worrying too ripped loose.

    Here's how I did it:

    After disassembly, I unsolder the old jack, carefully lift one corner at a time, until all 6 solder joints were loose.  The

    2 front and 2 rear tabs are on enveloping metal clips which can be removed separately.  The old jack appears just out of it

    slot in the jury.  Earlier, I bought an extension of 3.5 mm headset (with volume control, $8.99, p/n 4202559) from Radio Shack, just because it was the smallest molded into the store.  They had one for $2.49, what was right, but it was twice as big, so I spent the extra bucks because he must fit into the original hole.  I now have it cut and stripped the wires, leaving only an inch of thread on the new socket.  Then I soldered the 3 wires in their appropriate places, as

    as a result;  looking at the top of the Board, with the power switch facing you, you have 6 contacts arranged like this.

    : the 2 middle are positive of left and right, top left (ground) common to both channels. The others are only to secure the plug to the Board of Directors.   After brazing firmly the son I just put all together. the ribs on the molded strain relief perfectly nested within the original hole in the case, then it will not easily get out but retains some flexibility.  The only problem I see is that the case is not quite keep hanging down in that corner more, but that could easily be corrected by a small drop of super glue.  I'll do it later if it seems that the case is in danger of seperating

    or if the wire pulls.  I have also considered the fill area with hot melt glue, but who could do a more difficult future repair.  I think that super glue will be the best and is still to open again if you only use a microdot of glue.

    So after all this pain and suffering, I finally a player, maybe I can use for years to come.  Total cost:

    Given to nine Sansa View 8 GB... $60.00

    RadioShack 3.5 mm ext. p/n 4202559... $9.00

    Duracell Micro SD card 8GB... $20.00

    Total .........................................................................$89.00

    Of course, I could buy a 16 brand new notice of GB for that price, with one year warranty!  Well, NOW you can laugh,

    as long as you want!  But wait a minute, I would have just the same problem with a new, a week or a month

    After the purchase?  Then I could send it to Sandisk for RMA and after paying for delivery, and in the meantime maybe a month to get him back, I would have another new view to manhandle.  So a year later, after the replacement of my 3rd or 4th, the guarantee was due to expire, and I do repair above on it to make it work, having had the use of the thing for only 6 months of the first year, what with shipment will remind it so many times!  So maybe my path is correct. at least I use throughout the day now, and I'll NEVER have to send anywhere.

    The moral of this story is: don't out cheap if you want a decent PMP - spend $150-200 for a Samsung P3 or a

    Cowon S3; both have video and excellent sound and can read files DivX 800 x 600 without conversion, have tactile and menus screens customizable, not to mention the bigger screens.  If you just need to play music, there are a myriad

    players good markets that are simple and almost indestructible and if you lose or break will be a much less expensive than lesson

    that I've learned.

  • Helps the headphone jack!

    Welcome.

    So about 4-5 months ago, I bought a brand new HP Pavilion PC g6.
    A few months later (2-3) I started to have problems with the sound. Whenever I plugged the headphones, the sound would not come to her. First of all, I thought it was the helmet that I was using. It turns out that it wasn't. Then I thought it was something with audio players or anything else. (Control Panel-> hardware and sound-> manage audio devices). It turns out that it wasn't.

    The problem started as my helmet is sound but cut wide in some places. I have to play with the headphone jack and move it a bit to get the sound. At that time, portable headphone plug was already loose. Then, for about 5-10 minutes, something really strange happened. His was no more. I couldn't not all the sounds if it was for my headphones or speakers of my laptop.

    After about 10 minutes, the sound is back after a reboot. However, the sound was weird and glitch. I mean, is that whenever I plug in the headphones, 55% of the sound would come through them, but the other 45% would come out of my laptop speakerks.
    Yet once again, I thought it was the helmet, but no. Even with multiple changes of helmet and try them on different computers, the headphones were great. I started thinking that it was the helmet being loose which caused all these problems. I started to look for solutions. I came across a post of aid for the same issue: being loose headphone jack.
    Most of them said that if the helmet was not directly related to the motherboard, that the issue would be fixed easly.

    My question is:
    (1) how will I know if the headset is connected to the motherboard directly?
    (2) how can I fix the problem if;
    (a) it is directly connected.

    (b) if it is not connected to it directly.
    (3) the headphone plug is loose have EVERYTHING link to my sound works does not correctly.

    Thank you and more information will be provided on request.

    Additional information: I know that HP laptop computers have a 1 year warranty, however, how do I check for mine?

    Hi kamel.

    1. with the hardware problems, it is best to contact support for your options before going inside the laptop.

    2. If you notice that you are not covered by your phones warranty, if you provide me with your laptop model number, I'll see if there is a maintenance and service guide. (another workaround of the guarantee is to get a USB headset connected)

    < How can I find my laptop model number >: http://support.hp.com/us-en/document/c00033108

    3. Yes, he seems to have everything to do with the question.



    Check your warranty:

    http://h10025.www1.HP.com/ewfrf/wc/weInput?cc=us & LC = in



    HP technical support: 800-474-6836. If you do not live in the United States / Canada region please click the link below to get help from your region number. http://www.HP.com/cgi-bin/hpsupport/index.pl

  • R.I.P. E270? -Headphone Jack short

    Hi all

    My e270 has a short circuit in the headphone jack and the left channel is missing, unless I have move the plug.  I called Sandisk support to see if I could get it fixed, and what it might cost, but they don't fix them and recommend either to repair shops.

    I removed the back of the player and the four live few who appear to hold the inside of the front plate, but it seems to be something more now the whole player.  Do it just out of curiosity, because I am sure that I couldn't fix it anyway.

    Any suggestions on what kind of shops might be able to do this kind of repair?

    I think I'll try to install Rockbox - I can't screw it up more than it does already.

    I was happy with the player and would probably replace it with an another Sandisk refurbed if I find one at a good price online.

    Steve

    http://forums.SanDisk.com/Sansa/board/message?board.ID=E200&thread.ID=19757&view=by_date_ascending&p...

    read the WHOLE thread...

    ;-)

    One of my friends fell the other day and is irreparable. It was my daughter who was missing the left channel anyway (I did a few mono speakers) but I was the one who dropped by need and thus get a replacement somehow....   :-(

    Be very careful with what you do to it-nothing is messed up and there use more...

  • Headphone Jack, not to let the two devices at the same time - work Realtek problem - Dell Audio is unusable

    A copy of my post TomsHardware, where no one was trying to help:

    "To begin with, no thread any where online have solved my problem. My problem in the simplest possible terms:

    -J' bought a Razer right headphone, it does not work when it is connected.

    -J' spent the next 4 hours of downloading, re - download, install, uninstall and reinstall the Realtek drivers, because everybody says I had allow a setting or a related subcontractors as struggling separate devices or something, and I do not have the Realtek HD GUI; at least, I don't think so...

    - Then I discovered that Dell has decided to replace GUI from Realtek with "Dell Audio", which had two options, one of them being that it should even display settings or not.

    -J' took a few steps in Dell Community site and spent the Realtek driver with the Microsoft driver, and that got the headset to work.

    -My headset works fine, but the microphone is not yet detected.

    What I have relevance: right Razer headphones + microphone detachable; Dell Inspiron 15 w / only, audio unified; each unique Realtek and Microsoft audio driver compatible with Windows 8.1.

    What I don't have: the Realtek audio Manager.

    What I wish I had not: Audio from Dell.

    Someone please help me on this, because I have just fired over $100 for it, and I intend to use it for professional players and podcasting; no microphone is not cut it.

    Sorry if I look really angry at the moment, but I think we've all been there...

    Thank you. »

    The main issue: there is a definition of Realtek Audio Dell only exists to ban, I need to change that. I need to configure it to allow two different devices to use in the same decision, and Audio Dell replaced Realtek GUI with its own, which is pretty... Pretty useless. The two parameters, as there, one of them is "Show advanced settings", so congratulations to anyone who decided to do this monstrosity.

    EveryNameWasTaken
    Every post that I found online said that the Realtek HD GUI is the way to go

    Since you can't have the DD Realtek Audio Manager in a Dell, one wonders how they determined it was the answer.

    EveryNameWasTaken
    I just need a way to access

    My question is how to get all these other people. I think that probably they were not talking Dell laptops and their solution applies to some other manufacturers products.

    EveryNameWasTaken
    Please provide another way to separate input devices that are entered into the same outlet

    A headset devices are already separated in the properties. A helmet is an input device, microphone, which can be set as the default device in the properties (Control Panel > sound > recording tab > micro). It is for the internal microphone until an external microphone is connected. The other part of the headset, the headset is governed by sounds > playback > speakers. Who controls the speakers until the headphones or external speakers are connected.

    EveryNameWasTaken
    Inspiron 15 3542

    Thank you. I wanted to know because a couple of the Realtek drivers have a problem with the headphones or the part headphones headphones. Headphones are recognized by their impedance detection and I think that some of the drivers have their settings come down a little, or too narrow. None of the Realtek for the Inspiron 3542 versions are known to be bad for me, but if you get audio in the headphones using the native driver but not as the pass of the Realtek driver then I feel that the fault is with the Realtek driver. You can see all the drivers that comes from Dell for your model in the Inspiron 15 3542 html page. There is audio for Win7, 8.1 and 10 pilots. "WB" means 8.1 and 'WT' 10. I think that there are 2 of each. Try the two for any operating system you have. (If you have10 which, in itself, could be the problem - other people have said they have started the headphone problems when they installed 10) You should not try to install an older version of the driver on a newer version. First remove the newest one in the control panel.

    EveryNameWasTaken
    It befuddles me that Dell would give us a different GUI that has so few options

    I don't know if Dell Realtek & made that choice for technical reasons or something. I think that some of the laptops did not have the Realtek Manager when Dell has started using Realtek as a supplier, but that changed. Of course no one is happy to have fewer options, but yours is the first post, I've seen that reported to the mic. Many other posters have been unhappy, because Dell's Audio Manager does not provide a way to separately control the volume of the headset which is a problem because they can be much too strong, but the real Realtek Manager has an option to display ' phones as a separate device from the speakers.

    EveryNameWasTaken
    I did not buy a $100 laptop, I bought the headphones for $100

    I thought that you had purchased a used laptop. Some of the older 15 Inspiron are probably pretty cheap now.

    EveryNameWasTaken
    -A system restore will not change anything

    I run a retrieval system to remove windows or configuration problems, but that's just me.

    EveryNameWasTaken
    decision does not have a headphone and microphone with any device I checked

    If the plug does not work with any headphone it either because of the Realtek driver fails detecting the defective hardware or it. You should report to technical support if you have an extended warranty.

    EveryNameWasTaken
    "and I used an adapter USB jack to try my usual Microsoft LifeChat headset).

    Is an adapter USB jack of the same thing that the USB input audio in my previous screenshot? A usb plug avoids the problems of the Realtek combo decision-making because the USB does not use Realtek hardware or driver from Realtek. Headset LifeChat know either, but if they are a usb headset while they should work. USB audio devices are as separate sound cards - each device contains its own audio codec, even the small usb Jack. If a device usb audio does not work, it has nothing to do with the hardware, driver or Realtek Manager.

    EveryNameWasTaken
    Another laptop, an HP G62 old without a grip combo under Windows 7 Ultimate, could run them all very well

    You me lost there. The headphones you have tried in the Inspiron have a single plug for a headset jack (4 segments - TAKING), that looks like this?

    and you connected to a microphone jack on a laptop with the separate mic Sockets & normal headset?

    EveryNameWasTaken
    each response that I get from either Razer themselves or now these forums was condescending.

    Your two posts today have assumptions that make it difficult to formulate a convincing answer, but I I don't think I'm condescending. I try to avoid the annoyances that we see in so many forums. However, they are your feelings and you have a right to them.

    When I said to forget taking combo, I wasn't brushing off the problem, while recognizing that these mic combo jack issues are difficult, in large part because we can't use the native driver to test the Realtek driver, so we can't easily determine if it is a driver or a hardware problem. It is much simpler to use usb audio, but as I said I don't know what are the special features are required for your purposes of pod casting.

  • Portege R100 - defective headphone jack

    Headphone 3.5 mm on my R100 hole seems to be defective (I tried it with another helmet and with them the sound is distorted unless I managed to get the plug in the right position).

    I will provide Toshiba on this subject shortly, but I was just wondering if anyone could tell me if this component replacement is a simple procedure?

    Thank you very much.

    Hi Dan,.

    The headphone jack is a pretty basic device that can usually be bought quite cheaply from most electrical spare outlets. The real problem is to find a repairman that will repair to the component level. Nowadays, the trend is to replace a whole PCB rather than simply weld on a new component.

    According your description of the problem as it sounds as if we spring metal tags is either loose or bent and therefore does not sufficiently wityh contact the helmet when it is inserted.

    If your laptop is still under warranty, then it should be replaced at no charge.

    If your warranty has expired, it may be useful to check for repairers of local PC that quote ' component-level) repair services.

    Good luck

  • Satellite Pro A200-PSAE4E: Headphone Jack does not work

    I use this computer to my work as a dj. and I use one called audio8djdriver (http://www.native-instruments.com/index.php?id=audio8dj&ftu=25a739a1c5cd54c) external sound card and I used it with a program called traktor (http://www.native-instruments.com/index.php?id=traktor3_us) and use usb sound card.

    Here I put in the links of the product if you n t know what it is...

    And when I m at home I n t use this external sound card.
    I just used the release of the phone forward as a line out put...

    But suddenly sound only coming sound speaker that is built into the computer.
    I tried to reinstall the audio drivers but no success

    It seems that he doesn t know I have something out of the phone or microphone. And I even tried to upgrade the Bios.
    It may have something to do with the upgrade of the Microsoft Vista?

    Hello

    Have you tried plugging a headset to the headset jack to see if it would work?

    This external sound card is not only known to me and I ve no experience with this device, but using the helmet you could check if this problem is related to the headphone jack or another part.

    On the other hand if you use Win XP then you can check the settings in device-> Realtek HD audio Manager manager.
    There is a tab called Audio i/o.

    Plug in headphones and see if they would be activated it.

    Concerning

  • HP Pavilion 15 laptop: Headphone Jack works sometimes?

    My headphone works sometimes only. I'll get my wired headset and I can hear everything perfectly clear, but if I leave the laptop on overnight or leave for 30 minutes, I hear nothing more.

    I checked to make sure that the headphone jack is the audio device by default and the earphone works perfectly fine, so I don't see what the problem.

    The only way to solve the problem, as far as I understand, is to just restart the phone whenever the problem occurs, and it works. But I'd rather not have to restart every time this problem occurs. I also do not have to send the laptop.

    @polarpower,

    Hello and thanks for the display on the HP support forums.  There are only two things that can cause for your problem of making head phone.  When the system goes and warms the chips that handle the audio channel enter a blocking state as soon as this happens her loose.  As soon as you restart the voltage on the chips are erased and will work very well until things warm up again and the right signal is applied to this chip to block again.

    You can try to backup all your data and perform a recovery of the system so that tha system goes back to its original configuration.  It will be deleted including updates which could have caused this.

    Even though this is listed as Windows 8 you can use for Windows 10.

    HP computers - performing a recovery of HP (Windows 8) system

    Failure to resolve the issue, you will need to send in for repair.  Use the following link to help you contact the appropriate HP support department.

    Contact HP support.

    Please let me know how things are going with this.  Thanks again for posting and have a great day.

  • PC Cleaner, Ouch! Can't connect after I use it? I'll have to use another computer. Can't access mine?

    Good yesterday, I decided to come here to try to find out why I kept getting "Windows Explorer has encountered a problem and needs to close." Does this every time I tried to access my computer the files/folders. (downloads, program files, etc...). Well, saw some success messages on PC cleaner and how he solved this problem and others. So I downloaded and executed. Once he was done, I clicked on the option "Fix All". Has done his thing, and then I restarted my computer. Well when I get to the Log-In and click on my user icon, it says connection... and returns immediately (as fast as a breath), once told your settings, the exclusion by the vote? I have not been able to log on since. Help. This happened directly after PC Cleaner has done what ever he did (after restart). Connect to my computer makes me nowhere.

    I can access BIOS but nothing to change there.
    I do not use the password option in the configuration, so it isn't that. Safe mode has no effect. Still can not connect. «Your parameter of loading '... then once 'your settings' "Logging Off".»

    Windows XP SP 3
      
    Help and thanks to whom ever can tell me how to fix this problem

    Do you mean that no matter what you try to do to log in normal or any kind of safe mode, you continue to see a message loop that look like this:

    Starting Windows...
    Loading your personal settings...
    Once your settings...
    End the session...
    Loading your personal settings...
    Once your settings...
    End the session...

    If so, it is usually a sign that your system is currently or has been reached by malicious software.

    I don't think that these links KB will work and KB307545 there's a lot of work - and you don't have symptoms suggestive of a necessity to implement KB307545.  You have symptoms of a file userinit.exe lack.

    There is a malware that removes, corrupts, or replace the file c:\windows\system32\userinit.exe and/or some registry settings associated with it.  It is also possible that your anti-virus quarantined (actually deleted) file c:\windows\system32\userinit.exe, thinking that he was in some way afflicted.

    The userinit.exe is the file that processes your login in normal mode or any kind of Mode safe, so if it is missing or broken in some way it creates a never-ending cycle of failed logon attempts in any mode for all users.

    If you have some other affliction and used the Configuration System (msconfig) utility to add the option/SafeBoot for STARTING systems. INI to solve some problems, it will present the same symptoms a userinit.exe file missing.

    Did you use the Configuration System (msconfig) utility to add the /SAFEBOOT option to the BOOT. INI on your system?

    If the userinit.exe file is missing or damaged in some way, it is usually easy to just replace. Even if the replacement of the file will let you log in again, just replace the file is not solved the problem - it fixes the symptom of the problem.  When you log in again, you must do a little more work to relieve your system of any malware got your system distressed in the first place.

    It can also modify your registry so instead of the registry pointing to userinit.exe, that it points
    in another file called wsaupdater.exe.  Sometimes scanning programs can find and replace the wsaupdater.exe file but not to repair the registry you will need to somehow get the system to start and fix the rest of the problem at hand.

    It is quite popular to have Microsoft create a knockout that describes the problem of wsaupdater:

    http://support.Microsoft.com/kb/892893

    I have not seen the problem of wsaupdater in a long time, but the absent userinit.exe is common.

    The following guidelines cover situations more than the article, but you should read the article anyway to figure things out a little better.

    AprΦs the dΘmarrage on the Console and recovery after run chkdsk/r with success, you should be in the C:\WINDOWS folder and the userinit.exe file is in the SYSTEM32 folder then change to the system32 folder by typing:

    CD system32

    Check the presence of the userinit.exe wsaupdater.exe. They may be there or they may not, but we need to know:

    Userinit.exe dir (post results - the file exists or not)
    wsaupdater.exe dir (post results - the file exists or not)

    No matter what you find, replace in any case the userinit.exe according to a copy elsewhere on your system.

    There is a copy backup of the userinit.exe in the c:\windows\system32\dllcache folder then copy it to the
    the c:\windows\system32 folder.

    In the c:\windows\system32 folder, enter:

    Copy c:\windows\system32\dllcache\userinit.exe c:\windows\system32

    If the file is not found is dllcache, this can work according to your installation:

    copy c:\windows\servicepackfiles\i386 c:\windows\system32

    If even that fails, you can get a userinit.exe on a Flash DRIVE or a floppy disk and replace it.

    There are a userinit.exe XP SP3 on my SkyDrive, you can download:

    https://SkyDrive.live.com/?CID=6a7e789cab1d6f39&ID=6A7E789CAB1D6F39%21311

    Answered in the affirmative if invited to replace the existing file and then you should see a
    message 1 file (s) has been copied.

    If you have a bootable installed genuine XP installation CD and the CD is drive X, unzip the file
    leave the CD-ROM i386 folder to the c:\windows\system32 folder by entering this command:

    Expand x:\i386\userinit.ex_ c:\windows\system32

    Answered in the affirmative if invited to replace the existing file and then you should see a
    message 1 file (s) has been expanded.

    Remove the CD and enter the command "exit" at the Recovery Console prompt to reboot your system.

    Report your results.

  • No sound from front headphone jack

    Just installed Creative blaster x - fi titanium sound card in my desktop HP P7 1234.  Everything works fine except no sound from the front headphone jack.  The jacdk worked until I installed the card.  I need the decision-making to use as another line for around the music of the pool.

    Any help will be greatly appreciated

    Thank you

    Jay

    If you install a card its additrional you can only use this smart - card ports on Board will be disabled.
    You need to check if you can connect the ports of the façade to the new card - otherwise you will get a card where it would work.

    Or simply use an audio splitter (Y-cable) to connect a second audio device to the new card.

    C.

  • Windows 8 - Headphone Jack does not

    After the upgrade to Windows 7 8 my headphone jack is no longer works.

    I have an Asus G73sw with dual-boot Ubuntu Linux and Windows 8.
    In Ubuntu, the headphone jack works fine without any problems. It tells me that it is a Windows problem.
    In Windows, I did a right click on the speaker icon and select "playback devices".
    I checked "Show disabled devices" and "Show disconnected devices", but there is no headset device.
    When there is a headset plugged in, sound properly comes through the internal speakers of the laptop. When I plug the headphones, the speakers feature still shows green volume bars, but the internal speakers are silent suggests something trying to switch to the headset, but there is no mechanism for the headphones.
    I have correctly installed the Realtek HD audio drivers for my computer and when I plug my headphones, Realtek identifies that a device has been plugged into the audio jack.
    I tried to uninstall and reinstall the drivers Realtek, nothing helps. However, I don't think it's a problem with Realtek. When I uninstall the drivers Realtek completely and use Windows HD audio driver, helmet still does not work (and still it is not a device of helmet). This makes me think that Windows 8 is having a problem finding the headset device.
    How can I solve this problem?
    Thank you for your time.

    Ouch, why in the world Asus 59 versions later the same driver.  You would think "here is the most recent with all patches and fixes" would be preferable.

    Speaking of which, it looks like one was released on 17 May (verison.6890), about 3 weeks after your message here.  They do not have the notes on what has changed and what they have set, but it's worth a try.

    Be sure to uninstall the current as completely as possible (programs in Control Panel, and then by the driver in the Device Manager) and then restart the computer before installing this new.

  • the iPad headphone jack fault

    HI, I own an iPad iPad 4 mini and an iPad2

    There is a week iPad headphone plug 4 went in one channel and was sent for repair.

    last night, taken to mini helmet iPad went extremely crunchy before a few hours later the iPad died completely.

    Headphone Jack even night iPad 2 does not recognize a put jack in and goes to the headset mode.

    I like to use iPads for Djaying but cant help thinking that the helmet in all iPads is lower

    advise please because I can not continue to pay for repairs and lose the job because of this problem.

    Thanks in advance

    You can try to check the ports for any debris as well as the verification of the other end of your equipment. It is rare that the iPads fail together so by chance in order to check the other end of this cable.

  • My last Firefox no longer works and I can't fix it. I use Windows 8. I made the mistake of downloading DuckDuckGo. He immediately took over as my default

    My last Firefox no longer works and I can't fix it. I use Windows 8. I made the mistake of downloading DuckDuckGo. He immediately took over as my default browser and it would not allow me to change back. I realized that I had something that I had not needed so I tried to remove it. It took a morning full of accomplish this chore. I went back to Firefox and found that my tabs were there, but they were opaque and would not work. In fact, you could read what was beneath them. No way to get anything wthout return to the start page of Firefox. I uninstalled Firefox and put it back on and it was always the same thing with the non operation of the opaque tabs. Troops you have good ideas as to how I can get my Firefox working again?

    The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
    Note: This will make you lose all the Extensions, open Web sites and preferences.

    To reset Firefox, perform the following steps:

    1. Go to Firefox > help > troubleshooting information.
    2. Click on the button 'Reset Firefox'.
    3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
    4. Firefox opens with all the default settings applied.

    Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

    This solve your problems? Please report to us!

  • Equium A200 - Windows could not start after using another disc recovery

    Hi... my daughter accidentally ran his recovery disk for its Equium A100 into my laptop Equium A200, when I got home and started, I got the message
    ..
    > Windows cannot start. A recent hardware or software change might be the cause. To solve the problem:

    1. Insert your Windows installation disc and restart your computer.
    2. choose your language settings, and then click "next".
    3. click on "Repair your computer."

    If you do not have the disk, contact your system administrator or computer manufacturer for assistance.

    File: \Windows\system32\winload.exe

    Status: 0xc0000000f

    Info: The selected entry could not be loaded because the application is missing or damaged.
    ..
    I no longer my restore disk and cannot afford to replace it, is it an another sollution, I have a recovery/restore disk of the Symantec file lent by a friend, but am unsure if it is of no use, when I run it I get the message that there is no restore point and it's in a good way I'm using these things, it drives me crazy that this laptop as does a lot these days is not come with an OS disc (my OS is Vista Home Premium)... All help would welcome.

    Hello!

    That's why you used the recovery from another laptop disk and it won't work.
    I think you need the recovery disk for Equium A200 laptop.

    I n t have experience with Symantec recovery function but I can allows you to use a recovery disk Toshiba prefer. This contains all of the drivers and tools of Toshiba and so you can make sure that everything works after that.

    If your laptop comes with a recovery disk, contact the nearest ASP and request a new one.
    If your laptop with a recovery disk is not delivered, you can directly order a new a form Toshiba:
    https://backupmedia.Toshiba.EU/landing.aspx

    Good bye

Maybe you are looking for

  • iMessages does not update from other devices?

    When I send an iMessage on my iPhone or iPad, it does not appear to be updated to show this on one of my Macs. If I send it to my Mac it does not refresh on iOS devices. It allows, and I'm able to sync my open tabs in Safari. Anyone know what could b

  • lost windows media without known reason player

    I very recently used SPAMfighter, since I finally used Windows Media Player.

  • Acer Aspire V7-582PG appear on the Acer support pages. Something has bud?

    This Acer support page: http://www.acer.fi/ac/fi/FI/content/drivers no longer works. It is said only 'no result '. SNID or serial number are correct. He has worked previously. Can anyone help? Fr. Jukka

  • Please help with XP Pro SP2 download problem!

    I just had to re - install Windows XP Professional w / SP1a. I can't manually find SP2 to Windows Update for XP is not up-to-date. The only version I find is for professionals and Windows Update tells me to check the link for one version service pack

  • How to generate a unique global identifier?

    I was sure that this would be covered somewhere, but couldn't find it.  I was wondering if there is any standard way to create some sort of unique identifier, a little in the world?  I'm trying to collect data from my application and I try to avoid c