Fixit Fix MS needs ' n. Continue to get "an unexpected error has occurred" when I run Fixit

Similar Questions

• BDV-N790W, I continue to 'get a network error has occurred' connection status cannot be confirmed.

  Everything was fine and now for all my applications online, I get "a network error occurred" I unplugged everything, including my wifi. I've turned off, reset and power on. When I go into network settings, it says its connected.

  Any ideas?

  I disabled the quick start too and I was able to connect. Netflix has been in service for about 30 minutes now.

• Cannot run Microsoft FIXIT error: "an unexpected error has occurred.

  Title: Microsoft Fix it fails

  Hello

  Whenever I try to run Microsoft Fix it, I get an error message saying something like "an unexpected error has occurred.  The fix that it Wizard cannot continue. "I used to see if the Fix, it would help solve the problem of update that take place on this Dell Inspiron laptop running Windows Vista 32-bit Service Pack 1 with Norton 360.  I thought that I had made progress on the issue of the update, but now they are all fail during installation, including Service Pack 2.
  The Dell PC Checkup shows as operating without any problems portable equipment.
  Thanks for any help that can be offered.
  Kind regards
  Roxy111

  Hello

  -What is the FIXIT you have tried to solve this problem?
  -Do you have problems with the installation of the Windows updates?
  -You receive an error message while trying to install updates?
  -You are aware of any changes made on the computer before this problem?
   
  Step 1: I suggest you to see the link below and cehck if the problem persists.
  FIXIT solution Center
  http://fixitcenter.support.Microsoft.com/portal/FindSolutions
   
  Step 2: File system (CFS) Checker

  SFC tool scans system files and replaces incorrect versions of system files by using the correct versions.

  To run the System File Checker tool, follow these steps:

  (a) click Startand type cmd in the box start the search.

  (b) right click on cmd in the programs list and then click run as administrator.

  If you are prompted for an administrator password or confirmation, type your password or click on continue

  (c) for the command prompts, the following line and press ENTER:

  sfc/scannow

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7?

  http://support.Microsoft.com/kb/929833

   
  Step 3: Clean boot

  I suggest to maintain the computer in clean boot mode and check if the problem still persists. A clean boot to check if startup item or services to third-party application is causing this issue.
  You can read the following article to configure the computer to boot:
  http://support.Microsoft.com/kb/929135
  Note: After the troubleshooting steps, see the link to start to set up the computer in normal clean startup mode.

  For reference:
  Information about Service Pack 2 for Windows Vista and Windows Server 2008
  http://support.Microsoft.com/kb/948465
   
  Hope this information helps.

• Fix the installation Center has encountered an error - an unexpected error has occurred

  I had tried everything to install the Microsoft difficulty It Center but get the same error at all times and have no idea why.  The error message is:

  Fix the installation Center has encountered an error

  An unexpected error has occurred.  Close, and then try to install again.

  
  

  Of course I tried this several times with the same results.  I am logged on as administrator and cannot find any specific details as to why it persists.  Can you help me?
  

  Dave

  OK, besides it seems that this happens if AutoPlay is disabled (!).

  http://social.Microsoft.com/forums/en-us/fixitcenter/thread/9089abba-ACA9-4833-ab71-c863c69d696d

• Microsoft Fixit error "an error has occurred when sending your information to Microsoft. How do you proceed? »

  Original title: Microsoft Fix It

  When I use the Microsoft to adapt after the fix I try to send the information to Microsoft I get the following message is displayed: an error has occurred when sending your information to Microsoft. How do you proceed?

  Lisa

  Hi Lisa,

  Please help me with the following information about the issue with the fixit:

  (1) who is the Microsoft Fixit you trying to run?

  (2) what is the problem that you are experiencing when you try to run the fixit?

  (3) is the computer connected to the Internet when you try to send the information after running the fixit?

  This could be a problem with the Microsoft Fixit, you are trying to run.

  If you encounter problems when running Microsoft Fixit, I suggest you to publish the query on the fixit forum. Check out the link:

  http://social.Microsoft.com/forums/en-us/home

  Please let us know if you have more queries on problems with Windows.

• How to fix "an error has occurred when attempting to change modules.

  How to fix "an error has occurred when attempting to change modules" on a MAC?

  Hi josephh,.

  Please see this link for troubleshooting steps: error changing modules

• Always get "an unknown error has occurred." When you try to reset the password.

  I got an email from iCloud and forgot his password. I'm 100% sure that safety issues are correct, but always gets "an unknown error has occurred." pop up when I press continue after having answered the questions. What answer I go, good or bad, will give me the same error. I can't reset by email because the enamel of rescue is the iCloud himself account. How can I fix? Thank you.

  Enter your Apple ID and click on I forgot the password,.

  Apple ID - manage

• When I open Internet explorer in windows and I am trying to use facebook or no matter what games, I get a script error has occurred on this page do you still want to run

  Original title: not admissible error in windows

  When I open Internet explorer in windows and I am trying to use facebook or no matter what games, I get a script error has occurred on this page want to still run and also first message is unacceptable, then the error message how can I fix a script if everything they told me to do, tried of thise disable ad ons, enable ad - ons (what I have now) reinstall it IE upgrade to ie and nothing helped think I need to repair my windows xp professional, but do not have the original disc to do, and nowhere on windows can I find a repair tool.

  Hello

  1. don't you make changes on the computer before this problem?
  2. what version of internet explore do you use?
  3. What is the exact error message?

  Step 1: Check if the problem persists in safe mode with networking and send back the same.

  Step 2: Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

  Reference:
  Using the event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_event_viewer.mspx?mfr=true

  Understanding of event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/event_overview_01.mspx?mfr=true

  Procedure to view and manage event logs in Event Viewer in Windows XP
  http://support.Microsoft.com/kb/308427

• Cannot install LifeCam HD-5000 on Windows XP - error "Setup cannot continue because an unexpected error has occurred."

  Original title: 953691

  Installation of webcam LifeCam HD-5000. I'm on Windows XP and you get to halfway through the installation and error message came through. Three times so far.

  Error message reads

  The installation cannot continue because an unexpected error has occurred

  http / / microsoft.com//kb/953691 support

  Any suggestions?

  Hello

  ·        Have you tried the steps mentioned in the article KB 953691?

  ·        What service pack is installed on your Windows XP system and version, 32-bit or 64-bit, what has?

  If you have not tried the steps mentioned in the article then, I suggest you try the steps and let know us if the problem is solved or not.

  Troubleshoot installation of Intellipoint and IntelliType LifeCam software

  http://support.Microsoft.com/kb/953691

  If you use Windows XP 64-bit, then the LifeCam HD-5000 is not compatible.

  http://www.Microsoft.com/hardware/digitalcommunication/ProductDetails.aspx?pid=019&active_tab=systemRequirements

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Lightroom 4: cannot change to slide show Module - Get error has occurred when attempting to change the module

  I have a new MacMini (2 months) with OSX 10.8.2 and 16 GB of ram. I had a partial re - installed, bringing more of my settings from my old computer (a MacBook Pro, 10.8.2)

  4.3 Lightroom worked very well until I went to use the slideshow module.  I received an error message and the library module does not open.  Read the message "an error has occurred when attempting to change modules.

  What can I do to fix this?

  Here's what I've done so far:

  1. checekd the disk permissions and disk status - all ok
  2. check the integrity of my catalogs and saved them - all ok
  3. moved files preferably, ending with 'plist' from the root and user libraries - no change
  4. only moved to the folder of the user, to support / library/application - no change
  5. Checked and opened upward "privileges" on the files for the library files and the catalog files.  Checked 'apply to all files' - no change
  6. contacted one and Nik to see if they had heard of this problem - no, they didn't and don't think their programs could be the cause of this problem
  7. Contact Adobe - level 1 support - crossed some of the points above - no effect

  I am waiting for a call from level 2 return to Adobe.  In the meantime, one has this problem or have any other suggestions.  The only alternative I have is to completely uninstall Lr and start again.  But it's a bit drastic.

  Thank you

  This is a bug, usually related to having a second monitor attached.

  Roll to 4.2 from here: http://www.adobe.com/support/downloads/detail.jsp?ftpID=5487 - simply drag 4.3 to the trash, and run this installer.

• Attempt to remove e-mail Messages in Windows 7 Live Mail. Used to work but now get "an unknown error has occurred."

  Attempt to remove e-mail Messages in Windows 7 Live Mail.  Used to work but now get "an unknown error has occurred."

  Administrative events Viewer.

  wlmail (5472) WindowsLiveMail0: page of data read from the file "C:\Users\MyName\AppData\Local\Microsoft\Windows Live Mail\Mail.MSMessageStore" at offset 269484032 (0 x 0000000010100000) (page 32895 (0x807F) the database) to 8192 bytes (0 x 00002000) failed verification because it contains no page data. The read operation will fail with Error - 1019 (0xfffffc05). If this condition persists then please restore it from a previous backup. This problem is probably due to a defective material. For further assistance diagnosing the problem, contact your hardware vendor.

  Hello

  Because the problem is with Windows Live Mail, I suggest you to post your query on the Windows Live community forums to get help.
  http://www.windowslivehelp.com/product.aspx?ProductID=15

  Kind regards
  Afzal Taher
  Microsoft technical support engineer

• I get an unexpected error in catalog when trying to open Lightroom CC. I tried all the options without success and am becoming quite frustrated

  I get an unexpected error in catalog when trying to open Lightroom CC. I tried all the options without success and am becoming quite frustrated

  reset your preferences - https://helpx.adobe.com/lightroom/help/setting-preferences-lightroom.html

• Impossible to install Microsoft products, getting "an internal error has occurred."

  It seems that I am more able to install the Microsoft product. This all started when I tried to reinstall Games for Windows Live as he kept randomly sign out after a half hour of play. After completely uninstaslling, I tried to reinstall it and got the error "an internal error has occurred." The journal is here: http://pastebin.com/d0i1b6ES I have been unable to solve this delivers also the number I got to support GFWL is now supported in Xbox Live.

  But it seems that the problem goes further than GFWL. I started by Skype and it needed to be updated, only it wouldn't install the update due to "an internal error has occurred" error code: 1603 and the making available of patches online seem to not work. With a single instance of Microsoft installation set (50461) I also had "an internal error has occurred."

  I'm really at a loss with this.

  • System log
  • The application log
  • Exporting system information

  Jasper

  The reason why I am interested in the free disk space on your C partition, it is that it would appear reasonable to perform an in Place Upgrade. To do this, the more satisfactory is to download a copy of Windows 7 on one partition other than C and run together to the top from there. You can then repair the installed copy of Windows 7on your C partition. All you then need to do is install all Windows updates after SP1 update. All programs and data files remain unchanged.

  The C: drive
  Local fixed disk description
  Uncompressed
  NTFS file system
  Size 922,79 GB (990,841,401,344 bytes)
  Free space 109.10 GB (117,141,598,208 bytes)

  To continue, you would need to create a new partition taking 50 GB of disk space on your C partition. That would leave your C partition with 60 GB of free disk space, and I would prefer to see more. When you have completed the in Place Upgrade you can remove the downloaded version of Windows 7 and to merge the partition in C.

  I guess you know the installed copy of Windows 7 product key. Please confirm that you are and that it matches the key specified on the COA sticker on the computer case. Please confirm that the copy of Windows 7 installed is not an upgrade from Windows XP or Vista? Do not post details of the 25-character product key.

• When I open lightroom cc I get an internal error has occurred:? 0: attempt to index field ' info.poodle'(a nil value)

  any ideas? I optimized lightroom catalog closed and still get the error

  Hi joey58,

  Greetings.

  Please check this thread and see if it helps - no fix for "impossible to export: an internal error has occurred:?: 0: try to index the value nil". "

  Concerning

  Rohit

• A computer record virtual using the VI Toolkit gets "a general error has occurred: invalid error" error.

  Hello

  I am a relative to the VI Toolkit novice so apologies if I ask you something ridiculous.

  I am trying to save a virtual machine using the VI Toolkit, but get the error "a general error has occurred: failure of ' (seen in the VI Client) when the virtual machine must be connected to the host. I use Registervm_task to perform this task.

  Here is the code:

  -

  ---

  to connect-VIServer MyVIServer

  http://Reflection.Assembly: LoadWithPartialName ("vmware.vim")

  $clus_name = "MY_CLUSTER".

  $folder_name = "DR".

  $esxcsv = import-csv «.\esx-hosts.csv.

  $vmcsv = import-csv «.\vm-list.csv.

  $dr_folder = get-view-file-filter viewtype @{"name" = $folder_name}

  $clus = get-view - viewtype ClusterComputeResource-filter @{"name" = $clus_name}

  foreach ($vm to $vmcsv)

  {

  + $dr_folder. RegisterVM_task($vm.) PATH, $vm. VM, $false, $clus. ResourcePool, $null) +.

  }

  -

  ---

  If I look in the 'tasks and events' VI, I see the following events:

  'Machine virtual myvm is connected' and then a few seconds later "Creating myserver on the host myhost.myfqdn.net in my data center"

  I can join the virtual machine manually via the VI Client and confirmed the account that I'm using has permissions.

  Any ideas or suggestions would be welcome.

  Kind regards

  Jamie.

  If the problem persists, could perhaps include a sample of the content of the two CSV files?