Flash being not recognized as installed

Similar Questions

• USB flash drive not recognized and install

  USB port works fine in my computer, I have Windows vista basic with acer laptop
  but when a usb flash drive is inserted it not recognize and install
  unitentified error of device and driver to the generic sound of end error

  pls help

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  Windows Vista Compatibility Center

  First thing to do is to check its Vista compatibility at the link above, and if not to see what patches/solutions are available from its manufacturer...

  See you soon. Mick Murphy - Microsoft partner

• Satellite L30-101 WLan card not recognized after installing XP

  Hey

  I just finished my Vista to XP downgrade L30-101 and installed all the drivers I found were those that I needed, but now it's not recognizing the wireless and I do not know how to fix this...

  The wireless icon is not in the Internet Connections folder or anywhere else, but I have already downloaded a modem one try it and a network card, a...

  He had an Atheros card on it too I think, I downloaded the driver for this as well...

  Hello!

  Do you have the yellow marks or unknown devices in Device Manager?

  In your case I'd do an update of the BIOS if you n t have the most recent version, and Yes, you have an Atheros WLAN card, so you need Atheros driver.

  Please check if the switch wireless on the laptop is on.

  Good bye

• Floppy USB drive not recognized when installing WinXP on Satellite Pro L40

  History:

  I bought a Satellite Pro L40, it came with windows vista. I can't stand vista windows for obvious reasons. so I formatted the HARD drive. I have a copy of windows XP.

  IV ' e read on the internet that I need Intel storage driver manager...

  IA´ve got the driver, he got on a floppy, and it does not, because when I start to install XP, it works (after pressing F6 & choose the driver to install). I come to the part of license agreement, press F8 accept...

  I select the partition I want to use (in format completely on vista). It starts to load more stuff... so he said "PLEASE INSERT LABELD - INTEL MATRIX STORAGE MANAGER DRIVER - DISK IN DRIVE A:" "PRESS ENTER WHEN READY."

  The disc that I used in the first place is always in. when I press on enter, nothing NOT to PAST (the USB floppy drive is not yet into action)

  How can I make it work? It is that I can get.

  I DON'T WANT BACK TO VISTA - HELP!

  This could happen if the floppy USB doesn t drive supports the standards of law. Some people have reported on different websites many floppy drives are not recognized.

  However, worry guy. I have a solution ;) (jeaaa: D)

  Try to create a new XP CD using the software called nLite!
  Then, you could include the SATA (Intel Matrix Storage Manager) driver in this new CD and then you could boot from the XP CD again.

  For details and how to use the nLite please Google because there are a lot of useful Web sites.

  Good bye

• Nighthawk R8500, USB 3.0 Flash drive not recognized USB 3.0 Port, Port of only 2.0

  My Nighthawk R8500 router with the latest firmware, V1.0.2.54_1.0.56, does not recognize my SanDisk Ultra Fit 128 GB USB 3.0 Flash drive when it is connected to the router USB 3.0 Port. The Ultra Fit is formatted in FAT32 and works fine when plugged into USB Port 2.0 router or my laptop.

  At first, I thought maybe USB 3.0 Port on my router wasn't working at all, but it recognizes my SanDisk 16 GB Cruzer USB 2.0 Flash Drive that is also formatted FAT 32. Unfortunately both my laptop have USB 2.0 Ports, so I don't know if the problem is with the router or the Ultra Fit Flash Drive. Everyone knows about this problem of their Flash 3.0 player is not recognized in USB 3.0 Port their router, especially with a SanDisk Ultra Fit? This problem can be resolved through firmware? I'd really like to take full advantage of the speed of USB 3.0 as I like to share files through my router via ReadyShare and ReadyCloud.

  Thanks in advance for any help, Carlos

  Technical support with me. Installation of a updated firmware, V1.0.2.64_1.0.62, which became available shortly after my post, solved the problem. -Carlos

• map of mSATA being not recognized on X 220-help

  Lenovo x 220

  Winodws 7 64-bit, up to this day

  MyDigitalSSD Super Cache2 50mm SATA III (6 G) mSATA SSD

  I installed my mSATA card by following the instructions and the party went well. As a couple of other people the player is not recognized by Windows 7. I checked storage management in windows 7 and the drive is not there in any form. I disabled all the caches as suggest some positions in the policies for the drive in windows 7. Once again no drive recognized.

  Any help you could provide would be really appreciated.

  Thank you

  Hi camjohnston,

  There are a few discussions about this on this map and a knowledge base article for you to check.

  Let us know what you find!

• Equium A60: DVD - RAM, being not recognized correctly

  Hiya!

  I have an EA60 and my carpet * a DVD-RAM UJ-820 s is currently not recognized by the laptop properly. When I go to device drivers, he said the driver has been loaded but returns the error code 41. I reloaded the Driver and the device, and it makes no difference.

  I also bought a new Pioneer DVD-RAM and it comes up with the same error code.

  Can someone help me please?

  [email protected]

  Kind regards

  Gary

  To start the registry editor
  Click Start, run, type regedit, and then click OK. Start the registry editor.

  Then follows the steps described above.

• Features of HDX18t not recognized after installing Win7

  After a clean install of Windows 7 Ultimate, Device Manager reports three devices Base system without driver and two unknown devices (ACPI\ENE0100 * ENE0100) and (USB\VID_138A & PID_0001 & REV_0372 USB\VID_138A & PID_0001).

  As far as I know, all the USB ports work correctly, as does everything that I tested (some ports that I don't use).  I assume that ACPI has something to do with power management, but I can't find any other indications of power problems - well that I had to replace the battery not long before installing Win7 because it was not supported.

  What are these five devices, and how can I find the drivers - especially for the three who seem not to identify?

  I tried to use the tool "automatically find your products and solutions ', but it does not load in the latest version of SeaMonkey, and with IE9, it seems to start but shows no progress after more than an hour.

  Any suggestions?

  Hello:

  This is the base system device.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-76497-1&CC=US&DLC=en&LC=en&os=4063&Product=3769214&sw_lang=

  The first unknown device that you posted that needs of pilots is that one.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-66577-1&CC=US&DLC=en&LC=en&os=4063&Product=3769214&sw_lang=

  The second unknown device what you have listed is this one.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-67648-1&CC=US&DLC=en&LC=en&os=4063&Product=3769214&sw_lang=

  Paul

• Any update yet to USB sticks being not recognized?

  I searched for help and found similar problems have yet to see any real solution.  Seems that many face the same problem with key USB cannot be recognized on Windows 7

  Is there any solution yet?  I'm not computer whizzkid so if there is a REAL difficulty (not something dubious Regedit that sounded like he screwed up computers everybodys!) please let me know how to do - it is so frustrating!

  See you soon

  Hello

  Have you checked the player on other computers running Windows 7, Vista or XP?

  Be sure to check forums and with Support of the manufacturer of the Drive, their documentation online.

  It is SanDisk however, these methods can help with other brands of USB keys.

  Cruzer not recognized by the PC
  http://KB.SanDisk.com/app/answers/detail/A_ID/10/kW/Cruzer/r_id/101834

  ===========================================================

  Check with manufacturer's support the system, their drivers and documentation online and ask for their
  Forums (if any) for known issues. Search for updates of BIOS, chipset of low-level drivers and others
  USB drivers on the site of the manufacturer of the system (motherboard for systems custom built manufacturer).

  If a PC remove ALL power and reinstallation of the cards, memory and cables (at both ends where possible)
  -in fact, remove and replace - do not just tight. Remove the dust bunnies and make sure that the ventilation openings
  are clear. For a laptop on everything that can be done is to reinstall the memory and clear the vents.

  If nothing works and it's a PC, you can disable the onboard USB and use a USB add-in card
  is not expensive. Of course for a PC or laptop using a real computer store (one who does in)
  Home service) or system manufacturer support can be requested.

  ============================================================

  Other troubleshooting methods:

  1 reboot to be sure nothing blocks the ports.

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -----------------------------------------------

  Then lets refresh the USB stack

  Control Panel - Device Manager - click in the box of white/white - VIEW - show hidden devices

  Look everywhere EXCEPT USB controllers for your device and if find you them (maybe
  plus_d' one of each) under disk drives, you can have several - right CLICK and UNINSTALL
  for all instances

  Control Panel right CLICK on EVERYTHING - Serial USB controllers - device configuration-manager and
  UNINSTALL all but the category itself - REBOOT - it refreshes the drive and battery USB

  This KB shows XP how to and the method of Vista is identical
  http://support.Microsoft.com/kb/310575

  This is a utility to help you, but do 1 above.

  USBDeview is a small utility that lists all USB devices currently connected to your computer.
  as well as all USB devices that you previously used. Run Options and tick the three 1st choice
  to see if one is there. Try to remove all instances and restart then plug the drive.
  http://www.NirSoft.NET/utils/usb_devices_view.html

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Being not recognized in dimension 8400 DVD drive

  Hi all

  I have a problem with my DVD drive in my dimension 8400 (about 3 years)

  I can open the DVD player and insert DVD/CD but they are not recognized,

  My computer is not present DVD player, there is no CD/DVD players present also in the management of devices.

  I think the DVD player I have is the Philips DVD 8601 HH 16 x DVD + RW,

  I had a similar problem about 1 year ago, but that has been fixed by updating the firmware/drivers. (although the DVD player doesn't "disappear" from my computer, it comes to refuse to play the disc at the time)

  Im not a computer newbie, so I tried several things to try to make it work:

  http://www.dellcommunity.com/supportforums/board/message?board.ID=dim_cdrom&message.ID=138730&query.ID=270189#M138730 I did steps 1-3 and 5, and nothing has worked.

  Someone at - recommended step 4 too? Question about step 4: you have to clear the CMOS chip memory AND reset the default settings of the BIOS Setup? It was not clear from the guide on this forum.

  I tried to download the updates of the Firmware, but when I tried to update it says "Device not found", logic, because the device is not - where on my computer.

  That's my problem.

  Thank you very much if anyone can help me

  Perhaps the DVD player is just broken and I need to get a new one, but the fact that I can open and close the lid and the light Burns gives me hope that its stil alive: P

  Concerning

  Rowan Schaap

  
  

• Connecting flash drive not recognized

  username and password not recognized by download of update and I don't have access to the original e-mail

  The password that you are asked is YOUR COMPUTER password, as is the operating system that is asking to specify the password.  It is not your password Apple ID.

• Logitech H530 being not recognized

  Recently, I bought a Logitech H530 headset after the microphone on my old broken, I've had for about 1 year.
  When I got home, I plugged into the same USB port as the old man and waited to make it. Shortly after in him plugging, I got yellow bubble message saying that the "peripheral USB could not be recognized. So I took it, put it back it and the same thing, I tried the rest of my USB ports, but I got the same message on each of them.
  I got out of my PC and tried in another message even once again, so I have it plugged into a laptop and the same thing.

  I intend to return for a new Wednesday because I think that it is faulty because my old one worked fine (with the exception of the physically broken microphone)
  But everything that you guys can suggest I'm willing to try

  Much appreciated,
  Louis.

  Have you installed the drivers for it?

  John

• Windows 8 - flash player not recognized

  I'm on Windows 8, IE 10 where Adobe Flash is already installed and therefore does not appear in my control panel.  When I click on a link in an e-mail to a site that requires Flash, he ALWAYS asks me to install Flash.  I know that I can copy and paste the Web site when I go to my office, but it seems that I shouldn't do that.  I use a g6 Pavilion.

  Thanks in advance.

  I have conntacted HP Support cat this morning and it seems that the problem is now resolved.

  We went to tools in IE and clcked manage add-ons and made sure that everything which was referred to in Adobe has been activated.  Yes, in my situation I haave active helper link Adobe PDF and shockwave flash on.  We have also checked the box for all websites in compatibility mode.

  Before that he had me download Firefox, however everything that we did after doing this we did on IE, so I doubt that had nothing to do with implementation.

  He said that MS does NOT haave a fix for this problem at this time.

  Thank you very much.

  Sally Young

• Flash Player not recognized by Acrobat XI

  I have problems after installing Adobe Acrobat XI and ActiveX of Flash Player.

  Open a PDF file with content flash in Adobe Acrobat XI results in a message saying that Flash Player is not available and must be installed, but it is already installed.

  Most, if not all of the machines affected hereby are on Windows XP.

  Any ideas why this would happen?

  Try this link: http://helpx.adobe.com/acrobat/kb/reader-acrobat-flash-player-download.html

• Flash drive not recognizing USB - c

  I just bought the new macbook 12 inches with the retina. I am very satisfied, but I'm having some trouble with two flash drives that I bought on Amazon. Sometimes, they recognize and sometimes they are not then I reboot

  and they work fine. What is happening to someone else? How can I fix?

  Others have noticed the same thing. Here are two threads, you might look at. In my eyes, there was not a single solution that works for most people with this problem. I do not recommend that you report your problem to Apple directly but I guess that they are aware.

  Retina Macbook does not notice external HD

  On Macbook USB devices

  Good luck

  Richard Glendon