Flash CC not dΘmarre after update

Similar Questions

• MY ipad has not automatically closing after update to ios 10

  MY ipad has not automatically closing after update to ios 10

  Take a look at suggestions from this thread. iOS 10 Auto-Lock does not.

• Mac Book (end 2008) not dΘmarre after upgrading to El Capitan 2016 (1511.3.1)

  Mac Book (end 2008) not dΘmarre after upgrading to El Capitan 2016 (1511.3.1) in order to prepare for Sierra

  I tried safe mode > disk utility, which took a lot of time and the disc seems to be OK.

  Extensions have nucleuses, almost all these .kext, but I'm not able to get rid of them.

  -What do you mean by? "Extensions have nucleuses, almost all these .kext, but I'm not able to get rid of them."?

  Did you delete anything?

  -The Mac can't you start mode (boot with the SHIFT key) safe?

  -Try to reset memory NVRAM/PRAM and SMC

  MacIntel: Reset of the controller (SMC) system management

  https://support.Apple.com/en-us/HT201295

  Subject of memory NVRAM and PRAM

  https://support.Apple.com/en-us/HT204063

  -Try to start safe mode

  OS x: what is Safe Boot, Safe Mode?

  https://support.Apple.com/en-us/HT201262

  -Start to recovery and repair the startup disk

  OS X: on OS X Recovery - Apple Support

  https://support.Apple.com/en-us/HT201314

  -If it is repairable reinstall the OSX

  How to reinstall OS X on your Mac - Apple Support

  https://support.Apple.com/en-us/HT204904

  -If you do not have a backup using disk utility to restore the internal drive to an external drive, so that you can try to recover the data.

  Format the boot disk and then do a fresh install of Mac OS x

• Can not delete emails after update to Thunderbird 31.2.0

  After update for Thunderbird Version 31.2.0 today, I'm not able to delete emails. Just nothing happens. Even the folder "Papierkorb" disappear. Can anyone help?

  Try to rebuild the troubled folder index file.
  Right click on the file - properties - file Repair

• not strong enough after updating iTunes

  Hello

  After updating iTunes yesterday, itunes is not as strong as before; of course, I changed volume in the menu bar as well as in volume ('her') maximum system configuration. If I use VLC, the volume is OK; Therefore, I don't think it's a problem of speakers of the Mac and iTunes.

  Thank you very much for your help

  Haperic

  Hello Haperic!

  From what you have posted, the sound after update of Mac is not as strong through iTunes but is fine using VLC or other applications. We certainly have to check a few things with the volume.

  If you haven't done so already, we'll leave iTunes in the menu next to the  iTunes when iTunes is active. Then quit iTunes.  Or command + Q on the keyboard.  Open later and try to play a few things after.

  No change after that, then go ahead and restart the Mac and try again, please.

  If it's still the same after the restart, then we'll reset the NVRAM/PRAM memory.

  How to reset the NVRAM on your Mac - Apple Support

  Reset the NVRAM

  1. Stop your Mac.
  2. Look for the following keys on the keyboard: command (⌘), Option, P, and R.
  3. Turn on your Mac.
  4. Press and hold the Command-Option-P-R keys, immediately after hearing the startup sound.
  5. Hold down these keys until the computer restarts and you hear the tone of starting for a second time.
  6. Release the keys.

  After resetting the NVRAM, you may need to reconfigure the parameters of the speaker volume, screen resolution, selection of boot disk and zone information.

  I hope this helps.  See you soon!

• IPad 2 could not be activated after update ios 9.3

  I can't activated my iPad2 after updating ios 9.3

  I'm having the same problem and don't have a clue what to do.  It shows just connect my iPad to iTunes to activate it, but how do I do that if I can't go to iTunes?

• ODI 12 c not dΘmarre after the Linux kernel update

  Hi all

  Currently, I am having trouble starting my 12 c ODI after that I updated a bunch of kernel and rebooted the machine.

  The work formerly configuration was as follows:

  Linux oraclelinux6.localdomain 3.8.13 - 35.3.4.el6uek.x86_64 #2 SMP Wed Jul 30 00:59:13 PDT 2014 x86_64 x86_64 x86_64 GNU/Linux

  ODI Standalone Edition Version 12.1.3

  Build ODI_12.1.3.0.0_GENERIC_140617.0542

  Java (TM) Platform 1.7.0_67

  Then I updated the package kernel - uek.x86_64, the output of the command "yum update" was the following:

  sudo yum update kernel - uek.x86_64 - y
  Loaded modules: refresh-packagekit, security
  Implementation of the update process
  Resolution of dependencies
  --> Running transaction control
  -> Package kernel - uek.x86_64 0:3.8.13 - 44.1.1.el6uek will be installed
  --> Processing dependency: kernel-firmware = 3.8.13 - 44.1.1.el6uek for package: kernel-uek - 3.8.13 - 44.1.1.el6uek.x86_64
  --> Running transaction control
  -> Package kernel-uek - firmware.noarch 0:3.8.13 - 44.1.1.el6uek will be installed
  --> Resolution of dependencies finished
  --> Running transaction control
  -> Package kernel - uek.x86_64 0:2.6.39 - 400.17.1.el6uek will be deleted
  -> Package kernel-uek - firmware.noarch 0:2.6.39 - 400.17.1.el6uek will be deleted
  --> Resolution of dependencies finished

  
  Resolved dependencies

  ===========================================================================================================================
  Package Arch Version repository size
  ===========================================================================================================================
  Installation:
  kernel-uek x86_64 3.8.13 - 44.1.1.el6uek public_ol6_UEKR3_latest 41 M
  Disassembly:
  2.6.39 - 400.17.1.el6uek @ol6_UEK_base 101 M x86_64 kernel-uek
  kernel-uek-firmware noarch 2.6.39 - 400.17.1.el6uek @ol6_UEK_base 5.0 M
  Install the dependencies:
  kernel-uek-firmware noarch 3.8.13 - 44.1.1.el6uek public_ol6_UEKR3_latest 1.9 M

  Summary of the operation
  ===========================================================================================================================
  Install 2 package (s)
  Remove the 2 package (s)

  Download size: 43 M
  Download packages:
  (1/2): kernel-uek - 3.8.13 - 44.1.1.el6uek.x86_64.rpm |  41 MO 00:55
  (2/2): kernel-uek-firmware - 3.8.13 - 44.1.1.el6uek.noarch.rpm | 1.9 MB, 00:02
  ---------------------------------------------------------------------------------------------------------------------------
  Total                                                                                          761 kB/s |  43 MO 00:58
  Running rpm_check_debug
  Running Transaction test
  Successful Test transaction
  Transaction running
  Installation: kernel-uek-firmware - 3.8.13 - 44.1.1.el6uek.noarch 1/4
  Installation: kernel-uek - 3.8.13 - 44.1.1.el6uek.x86_64 2/4
  Cleaning: kernel-uek - 2.6.39 - 400.17.1.el6uek.x86_64 3/4
  Cleaning: kernel-uek-firmware - 2.6.39 - 400.17.1.el6uek.noarch 4/4
  Audit: kernel-uek-firmware - 3.8.13 - 44.1.1.el6uek.noarch 1/4
  Audit: kernel-uek - 3.8.13 - 44.1.1.el6uek.x86_64 2/4
  Audit: kernel-uek - 2.6.39 - 400.17.1.el6uek.x86_64 3/4
  Audit: kernel-uek-firmware - 2.6.39 - 400.17.1.el6uek.noarch 4/4

  
  Deleted:
  core - uek.x86_64 0:2.6.39 - 400.17.1.el6uek
  kernel-uek - firmware.noarch 0:2.6.39 - 400.17.1.el6uek

  Installed:
  core - uek.x86_64 0:3.8.13 - 44.1.1.el6uek

  Dependency installed:
  kernel-uek - firmware.noarch 0:3.8.13 - 44.1.1.el6uek

  Complete!

  The broken configuration after the update of the kernel is as follows:

  Linux oraclelinux6.localdomain 3.8.13 - 44.1.1.el6uek.x86_64 #2 SMP Wed Sep 10 06:10:25 CDT 2014 x86_64 x86_64 x86_64 GNU/Linux

  ODI Standalone Edition Version 12.1.3

  Build ODI_12.1.3.0.0_GENERIC_140617.0542

  Java (TM) Platform 1.7.0_67

  When you try to start ODI-Studio after the reboot of the machine, the following Java exception appears:

  Merge Oracle Data Integrator Studio 12 c
  Copyright (c) 1997, 2014, Oracle and/or its affiliates. All rights reserved.

  2014-10-08 15:24:15.025 NOTIFICATION installation area set to file:/oradisk/Oracle/Middleware/Oracle_Home/
  java.lang.RuntimeException: Exception in org.eclipse.osgi.framework.internal.core.SystemBundleActivator.start () of org.eclipse.osgi bundle.
  at org.eclipse.osgi.framework.internal.core.InternalSystemBundle.resume(InternalSystemBundle.java:233)
  at org.eclipse.osgi.framework.internal.core.Framework.launch(Framework.java:657)
  at org.eclipse.osgi.framework.internal.core.EquinoxLauncher.internalInit(EquinoxLauncher.java:69)
  at org.eclipse.osgi.framework.internal.core.EquinoxLauncher.init(EquinoxLauncher.java:37)
  at org.eclipse.osgi.launch.Equinox.init(Equinox.java:178)
  at org.netbeans.modules.netbinox.Netbinox.init(Netbinox.java:84)
  at org.netbeans.core.netigso.Netigso.prepare(Netigso.java:166)
  at org.netbeans.NetigsoHandle.turnOn(NetigsoHandle.java:127)
  at org.netbeans.ModuleManager.enable(ModuleManager.java:1176)
  at org.netbeans.ModuleManager.enable(ModuleManager.java:1011)
  at org.netbeans.core.startup.ModuleList.installNew (ModuleList.java:340)
  at org.netbeans.core.startup.ModuleList.trigger (ModuleList.java:276)
  at org.netbeans.core.startup.ModuleSystem.restore (ModuleSystem.java:301)
  at org.netbeans.core.startup.Main.getModuleSystem (Main.java:181)
  at org.netbeans.core.startup.Main.getModuleSystem (Main.java:150)
  at org.netbeans.core.startup.Main.start (Main.java:307)
  at org.netbeans.core.startup.TopThreadGroup.run(TopThreadGroup.java:123)
  at java.lang.Thread.run(Thread.java:745)
  Caused by: org.osgi.framework.BundleException: Exception in org.eclipse.osgi.framework.internal.core.SystemBundleActivator.start () of org.eclipse.osgi bundle.
  at org.eclipse.osgi.framework.internal.core.BundleContextImpl.startActivator(BundleContextImpl.java:734)
  at org.eclipse.osgi.framework.internal.core.BundleContextImpl.start(BundleContextImpl.java:683)
  at org.eclipse.osgi.framework.internal.core.InternalSystemBundle.resume(InternalSystemBundle.java:225)
  ... more than 17
  Caused by: java.lang.NumberFormatException: for input string: "2.0."
  at java.lang.NumberFormatException.forInputString(NumberFormatException.java:65)
  at java.lang.Integer.parseInt(Integer.java:492)
  at java.lang.Integer.parseInt(Integer.java:527)
  at org.eclipse.osgi.internal.resolver.StateBuilder.createBundleDescription(StateBuilder.java:61)
  at org.eclipse.osgi.internal.resolver.StateObjectFactoryImpl.createBundleDescription(StateObjectFactoryImpl.java:33)
  at org.eclipse.osgi.internal.baseadaptor.BaseStorage.readStateData(BaseStorage.java:845)
  at org.eclipse.osgi.internal.baseadaptor.BaseStorage.getStateManager(BaseStorage.java:791)
  at org.eclipse.osgi.baseadaptor.BaseAdaptor.getPlatformAdmin(BaseAdaptor.java:380)
  at org.eclipse.core.runtime.internal.adaptor.EclipseAdaptorHook.frameworkStart(EclipseAdaptorHook.java:90)
  at org.eclipse.osgi.baseadaptor.BaseAdaptor.frameworkStart(BaseAdaptor.java:253)
  at org.eclipse.osgi.framework.internal.core.SystemBundleActivator.start(SystemBundleActivator.java:60)
  to org.eclipse.osgi.framework.internal.core.BundleContextImpl$ 1.run(BundleContextImpl.java:711)
  at java.security.AccessController.doPrivileged (Native Method)
  at org.eclipse.osgi.framework.internal.core.BundleContextImpl.startActivator(BundleContextImpl.java:702)
  ... 19 more

  I already tried to reinstall ODI 12 c 12.1.3, but the error message is always the same. However, ODI-Studio run as superuser (known) does not work, even if the entire configuration is lost, for example repository connections.

  Sorry for the wall of text, I thought that some details could be useful. Someone at - it never have a similar problem? Is this a known issue? How can this problem be solved? I have found no information about it until now.

  Thanks in advance and greetings
  Thomas
  
  

  Remove the following the user-home directory:

  /. ODI/system12.1.3.0.0

  and try again.

  You will lose some preferences. But this shouuld not to be a problem.

• Apps not to open after updating ios 9.3.2

  I've just updated my ios 9.3.2 software and everything, but one of my apps won't open. It's as if they have not yet been downloaded, but according to iTunes they are. The one app that works is the one I downloaded after upgrade to iPhone 6 s.

  Remove the application from your phone, and then reinstall the application.

• Plugin Flash will not install even after installing the latest version of Flash

  When I go to a site that contains Flash content, it says "a plugin is required to view this content" and there is a link to install the plugin. In addition, there is a message at the top of the page that says "additional plugins are required to display all the media on this page" with an option to "Install missing Plugins". I click on the link to install the missing plugin, and a dialog box appears that says "the following plugins are available: ' and 'Adobe Flash Player 11.0.1.152' lists with a checkbox next to it. The box is checked, and I click on 'Next' to install. He's going through the motions and then told me that 'no plugins were installed. There is a link to manually install the plugin, which brings me to the Adobe's Flash download page. I unchecked the box for pair McAfee Security download and downloaded the latest version of Flash (to be honest, I downloaded actually this exact version even about 10 times today). The dialog box appears, I save the file and once it has downloaded, open the folder that contains (my downloads folder). I then, close all programs (including Firefox) except for the folder of Windows Explorer I want to run the installer from. I double-click the Flash Installer to perform the installation. The installation process is complete, the installer tells me that the download is successful, and my browser opens upward with a message "Successful Installation" from the Adobe Web site. Yay! My installation is successful... Orrrrrr not. Return to the page with the Flash media - always have a message saying that I need the plugin. Try to download plugin once again... no dice.

  THEN, I go to "Manage my Add-ons" thinking maybe I need to activate the plugin. There is no plugin Flash (or Shockwave) listed on any of the menus - it is as if it does not exist.

  I downloaded the latest version of Java because I read somewhere that Flash requires Java work; I installed the "add-on Compatibility Reporter" so I could force Java to be enabled. It made no difference whatsoever, best I can tell.

  I also went to the Adobe homepage where you can see what version of Flash you use (http://www.adobe.com/software/flash/about/) and it does not even show that I have installed Flash. In Internet Explorer, it shows that I have installed Flash, but it's the previous version (but this is probably due to the fact that I downloaded Flash in Mozilla, not IE, and they use different modes in each browser - so an update that you download from a browser does not necessarily apply to the other browser).

  So in summary: I don't know what on Earth is wrong here, but I'm about as frustrated that I've never been in my life. I don't know why the installation of Adobe Flash is said she is successful (it sleeps for me?), but there is no plugin appear in my menu manage add-ons, and I googled all the possible combinations of content in this message and have not found a solution that works yet.

  It seems that you have found the 64-bit version of Flash. Is your Windows 7 64-bit?

  I did read your entire post, but NPSWF64_11_1_102.dll which is Flash 64-bit; This turns into a novel when it should have been a short story.

  First, uninstall all Flash your system by following these instructions from Adobe

  • http://kb2.Adobe.com/CPS/141/tn_14157.html

  Second, get the 32-bit versions of the following. Why? Unless you use an unofficial Firefox 64-bit version, the regular Firefox is a 32-bit browser and needs 32-bit Flash.

  • http://kb2.Adobe.com/CPS/191/tn_19166.html#main_Install_in_a_firewall_proxy_server_environment
    • Download/SAVE two ways, close all browsers and then install.
      • 32-bit Flash Player ActiveX (Internet Explorer)
      • 32-bit Flash Player plugin (all other browsers)

  Third, test Flash on websites where you had a problem before.

  If this does not work, my last suggestion for you is to follow the instructions from Adobe for troubleshooting. I don't know what's happening with your system, which could possibly be the cause of the problem.

  • Troubleshooting Adobe: http://kb2.adobe.com/cps/191/tn_19166.html

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

• My C850 Satellite will not be closed after update Win8.1

  I hope I can get help from this forum. Since I've updated my OS from windows 8 for windows 8.1 as my laptop (Toshiba c850) refused to stop, the screen goes blank (power off dark, signaling), but still the power light stays on, had to make a forced turn off many times.

  Please help because I'm losing my mind.

  Hello

  In my opinion, something was wrong during the upgrade.
  This is not unusual since I have read in various forums on strange issue after upgrade Windows 8.1.

  I recommend you do following:
  Set the computer laptop back to factory settings. Recover the laptop Windows 8
  Updated 8 Windows to the last State (all updates, patches must be installed)

  Then check the windows 8.1 upgrade information page http://www.toshiba.eu/innovation/generic/windows8_1-message/ and follow the step by step instructions that contain also the facility of 8.1 and tools Windows drivers in the correct order!

• Laptop HP Pavilion 2320DX g4: computer hp laptop pavilion g4 does not start successfully after update and return to windows 8.1

  Hi, I have recently updated my laptop to Windows 10. He had so many problems and I didn't like it at all, so I just returned my laptop to Windows 8.1.  Since then, my laptop does not correctly every time, and the fan immediately starts to work as well. I can start my pc and connect to my home screen each time.  If the tile is moving or light up when I move my cursor, then I know that I can use my laptop for a little while. It can freeze after getting out a good program. Other times when I start my laptop, everything is dead except for logging on my screen. My Windows key on the keyboard does not work most of the time.  If the screen does not respond the first time I turn, as described above, I can't absolutely nothing on my pc. I can't access the search bar by moving the cursor to top right, I can't open the tiles, I can't spend in desktop mode, etc.  Front I upgraded to Windows 10 and downgraded to 8.1 all worked perfectly, because I've updated from 8.0 to 8.1 Windows almost 2 years.  I have a defective battery. in fact I can only use my laptop if it is plugged. My fan is constantly going, but I don't know if it's my loss of battery or what's wrong with my pc now.  I have described my problem in the Microsoft community forum but have had little response that was not helpful. I was told to go to the command prompt and put in DISM: scan now (which also contained letters more than that, but I do not remember all). I followed the instructions and for 2 days, my pc seems to do better. Then he returned to this problem again. I hope you can help me.  If you have additional questions, post here or please email me at [removed personal information]. Thank you!

  DEB

  @DWESTDEWITT,

  Hello and thanks for the display on the HP support forum.  What you can do at this point that there are several updates released by microsoft and hardware vendors is running the Windows Update Troubleshooter.

  If this fails to solve the problem.  The only option will be to restore the operating system to the previous, until HP gets the drivers so that they can release them on the support page for your laptop for Windows 10.

  Thanks again for posting and have a great day.

• Tecra S11-14 t - Windows is not go further after updates

  Hello
  Tecra S11-14 t
  Two times the same problem. Problem after installing updates Windows 7 x 64 d Description of the problem: after installing six update - restart windows - after entering the password to login as an administrator - I... Hmmm... does not further!
  Withdrawal of previous state wines - does not help, same problem. After that installation of the hidden partition on the HDD is ok, then instantiated windows update and again the same problem!
  I suspect that some sort of update is in conflict with a program of the factory. Technical Microsoft said there are no other entries with the same problem.

  How to check the update does it hurt? The method of manually select and install the update will last forever.

  Hi biuro,.

  Can you start the laptop in safe mode and connect to Windows? It would be important to know if works at least in safe mode or not.

  Is it so if you install Service Pack 1 for Windows 7 before I start with a few other Windows updates?

• K3 Note sound camera is not turning off after update of Marshmallow

  After the update of the marshmallow sound camera my k3 note Sutter's not turn off... Even in silent mode, it sounds very strong.
  Someone knows how to turn off the sound.

  Note from the admin; phone added to the subject type

  When using your camera, simply turn on the option of DND and the shutter sound will be silent.

• LaserJet M1132: LaserJet M1132 deleted and could not be installed after update latest version 10 of Windows!

  3 days ago 10 Windows installed in my computer suddenly updated. After the update and reboot my PC, Wndows 10 deleted my laserjet m1132 system completely! And now I can't install it again, cause Windows 10 says that my printer driver is 'suspect' and it will be disabled instalation! Auto-detection of the companions of the local HPSupport site do see no printer connected to my PC completely! And PC does not say that all the new devices were connected. WHAT SHOULD I DO?

  Hey @fliperUA,

  Welcome to the HP forums!

  I see that your Laserjet M1132 will not be installed on your PC Windows 10. I can help with that.

  To install the drivers, we will do the following:

  1. If you have the USB cable connecting the printer to your computer, then remove it.
  2. Uninstall all the software your system associated with the printer.
  3. Disable all firewalls, antivirus, ad-blockers and similar programs on your PC.
  4. Download the latest drivers for your printer by clicking on this link.
  5. If the installer asks you to insert the USB cable then plug the cable at the time.

  This should allow you to install the drivers for your printer. If it does not then please let me know what error messages you see now and I should be able to help more.

  I hope this helps and I hope you have a great week!

  If this solves your problem then please help others to find this post by clicking on accept as Solution on my post.

  If you appreciate my help so please let others know by clicking on the icon below my post thumbs up.

• OptiPlex 990 not PXE boot after update Bios A18

  After the update to A18 on multiple machines, I noticed that they all hang after address DHCP is affected and what would normally be the menu timer (if it was not all work in progress) or launch from the boot of automation.

  I also noticed when you update to the latest version on our Latitude E6420s so.  Returning to the A17 on the 990 and the 6420 corrects this problem.

  Is anyone else having this problem, and this Signals to Dell.  I tried to Google this but any how, I wrote the search I can't find anything with recent BIOS.

  Hello Irios103,

  It is difficult to determine what is causing the conflict with Bios version A18 and your systems. The improvements to the code may be the cause of problems on Cisco switches or oldest feature, such as the tree covering weight or the characteristic power of conservation.  You can also make sure the quick port is enabled.
  If you do not need specific to this version of Bios patches, it may be better to not use it.

  Improvements & fixes for version Watch:
  1 address system does not meet the keyboard intermittently.
  2. address UEFI OS fail boot with this disk number HARD password.
  3. questions of CCTK.
  4. improve the compatibility of PCI devices and USB devices.
  5 Update Microcode Intel SandyBridge processor.
  6 update Intel PXE ROM.

  I hope this helps.  Please let us know if you need further assistance or more information.
  ~ Maureen
  #iwork4dell