Flash CS5.5 freeze problem when the film test.

Similar Questions

• Hello. I have a big problem. I have Photoshop, Indesign, Illustrator CS4 and Flash CS5 programs. I bought the programs a few years ago and used on my Mac with version 10.6.8. Now, I have a MacBook with the latest version 10.11. I wanted to copy the pro

  Hello. I have a big problem. I have Photoshop, Indesign, Illustrator CS4 and Flash CS5 programs. I bought the programs a few years ago and used on my Mac with version 10.6.8. Now, I have a MacBook with the latest version 10.11. I wanted to copy the programs on my MacBook to work also on this computer. I copied the folder with the programs 'Programs' and the folder of the "Library / Application Support / Adobe" on my USB key and pulled on the MacBook in the program folder and the folder of Adobe. Then I restarted the computer. When I wanted to start a program, I got with Photoshop, Illustrator, and Flash, the error 6 error message. For Indesign: "Adobe ID missing required files please reinstall missing file / Library / Application Support / Adobe / support /... / ROMAN." TXT ".» But on my old computer I could not find a record of support for the Type in the path to the Library / Application Support / Adobe. And I don't know what I have to do because of error 6. Can someone help me please? Thank you very much.

  Avoid copying files from one computer to the other. It won't work. You run out of hidden files scattered around the hard drive and interrupt the licensing mechanism.

  Uninstall, run the cleanup tool.

  Adobe - Adobe CS5 clean tool

  Reinstall from scratch and enter your serial number.

  Download download install and Installation Help | Download and Installation Help

  They will install under 30 days of testing. Enter your valid serial number to unlock the tests.

• my photoshop cs5.1 freezes up when I click on some tools like liquefy or preferences. What should I do?

  my photoshop cs5.1 freezes up when I click on some tools like liquefy or preferences. What should I do?

  Hi Raphael,.

  Please update the graphics driver on the manufacturing site for your system.

  Reference:Adobe Photoshop CC GPU (graphics processor) and card FAQ video

  In addition, you can try to reset Photoshop back to default preferences.

  To re-create the Photoshop preferences files, start the application while pressing Ctrl + Alt + Shift (Windows) or command + Option + shift (Mac OS). Then, click Yes to the message, "Delete the Adobe Photoshop settings file?"

  Let us know if that helps.

  Kind regards

  Mohit

• How to solve a problem when the windows setup program does not open a program, says I need to install it. and an error message 1706

  How to solve a problem when the windows setup program does not open a program, says I need installation cd and a 1706 error message happens.

  Hi PAtwoodwu,

  1. what program are you trying to install?

  2. did you of recent changes on the computer?

  3 does happen with all programs?

  Check and make sure that the Windows service install is running on the computer.

  (a) click on start to reduce this includes this image, click run , type services.msc , and then press enter to open Services.

  (b) right click on the Windows Installer service and then click Properties.

  (c) if the box Startup type is set to Disabled, change it to Manual.

  (d) click on OK to close the Properties window.

  (e) right click on the Windows Installer service and then click Start. The service should start without errors.

  (f) click on the file menu, and then click exit.

• How to display a .swf image when the film is disabled?

  I wonder how to display an image or a swf image when the film is not play. Any information appreciated. Thank you!

  A swf is never really off if it is displayed. But if you want something to show when there is nothing going on in the file, then just do sit in a frame with any content you intend to display.

• The tool brush Flash CC suddenly stops drawing when the step is small

  When you use the Brush tool, I have a problem that will be the race I paint abrupty cut at one point on the screen (about halfway to the bottom of the screen, it does not concern the position of the canvas or the coordinates).  This seems to happen when I have the scene size set to a smaller size (64 x 64 pixels for example).  I was able to reproduce the same behavior on several files and a Windows 8.1 machine and a Windows 7 machine, both using the updated version of Flash CC.  Both machines are double monitor, I'm not sure if that plays a factor.

  To reproduce:

  1. create a new FLA in Flash CC and set the size of the scene to 64 x 64 pixels.

  2. use the Brush tool and try to shoot from the top to the bottom of the screen (zoom level and position on the canvas is okay, as long as your cursor is going to the top of your screen to the bottom of your screen).

  3. the race cuts abruptly Mid-drawing at some point on the screen, about half way down.  You can continue to draw and move to the top, and it reappears when it crosses the barrier again.

  This does not occur if the size of the scene has something bigger (640 x 480, for example).  This also happens in Flash CS5 or CS6 and have noticed only happens in Flash CC.

  What is happening with the mouse to draw and also happened when I tested it on another PC with an attached Wacom tablet.

  Is what is happening to the other institutions, and is at - it a fix for this problem?  (aside, always using a size big stage)

  Hi all

  I want to just inform you that this issue has been resolved internally and even will be available to you as part of the next version of Flash CC.

  Thank you!

  Mohan

• ActionScript ignored when the film is put to the test

  I have a movie of 15 images in flash cs4

  I have a bg layer, composed on inanimate video clips (so that I can apply shadows to objects)

  I have 4 layers of animation film clips that have anchored OS animations. When I say some I mean that when I double click on it, I can access the animation of the OS. (I did this so that I can hold the bone animated object in a clip that I can apply a drop shadow)

  I have a layer of hotspot which is a transparent rectangle so that when the user moves the mouse over the area, the chronology and animations start

  now, here is the actionscript code:

  Section 1:

  Stop();

  hotspot.addEventListener (MouseEvent.MOUSE_OVER, animate_family);

  function animate_family(e:MouseEvent):void {}

  gotoAndPlay (1);

  stop();

  }

  section 15:

  gotoAndStop (1);

  MY PROBLEM: THE ACTIONSCRIPT IS IGNORED. THE ANIMATION IN A LOOP, NEVER STOPS AND STARTS EVEN WHEN I MOUSE OVER THE HOTSPOT REGION.

  If animations are movieclips that are on the timeline, so that you have this code works, they're going to play.  You need stop () s in the animations and your code must comand embedded animations to play.

  I don't know what your intent is with gotoAndPlay (1) immediately followed by a stop().  The code runs much faster than the trip of the timeline, so that the stop is probably put an end to the gotoAndPlay nothing... but I've never tried or seen before, then he could do something else as well.

• Satellite Pro M70 freezes everytime when the USB port is used

  Satellite Pro M70 (SPM76) crashes every time when the USB port is used.
  The mouse works, but external HD/Extarnal card sound/Memory stick causing the laptop to freeze. All the drivers are installed right, they are the most recent and have no trouble with other users.

  The devices are all compatible. Service pack 2 is installed, and all the hardware drivers on the toshiba have been updated... again, same problem.
  The toshiba is about 2 months old and have had this problem since I got it. First I thought it was the drvers, but I cleared of all (?) other options but the USB ports.

  Hello

  Believe me, that's not easy to say what the problem may be. It is important to see if the problem occurs because of hardware or software may be. I recommend you to backup all your data and reinstall the unit using rescue media. On this way the unit will be factory settings and will be clean preinstalled. Test your USB devices and see what happens.

  Try to use some standard like USB stick or external HARD disk parts, because in this case, you must not install any drivers please. If you use other devices like USB webcam with own software and drivers, it is possible that something goes wrong, but what. On this path, it is not possible to say.

• Satellite Pro U400 freezes sometimes when the power cord is plugged

  Hello! I know that this problem has been addressed here and there, but I'd like to open a new thread about it. Here's the scenario.

  I recently bought a new Toshiba Satellite Pro U400-247 (PSU45E) with two batteries: (a) the original, (b) in addition purchased authentic of Toshiba PA3636U-1BRL, 7200 mAh. The laptop has the latest BIOS (4.80) and the latest drivers downloaded from Toshiba and installed (ConfigFree is not installed). I use XP Pro SP3 (own installation by myself). Everything works fine, except for one thing:

  Sometimes (but), when the laptop is running on battery power and I plug in the power cord, everything hangs and I have to restart. A few observations:

  It tends to occur more frequently when the low battery alarm has rung;
  (b) it seems to happen more frequently with the 7200 mAh battery and less frequently with the original battery.
  (c) it seems to happen most often when a USB device (mouse, for example) has been linked to the laptop, but it is not a rule;
  (d) it seems to happen less often when I move the mouse USB at the time wherever I am connect the power cord.
  (e) I've experimented a lot with Toshiba PowerSaver settings (for example to change the levels of CPU for my profile) but nothing I changed seems to change the situation.
  (f) I tried different suggestions I found on various forums, but nothing works (for example the BIOS settings);
  (g) otherwise, I can say that I have not really seen a smoother computer, everything works really fine, no other problem :)

  Everything that makes me think it must be some sort of bug in the drivers of motherboard driver PowerSaver or other drivers interact with battery, CPU or possibly USB. Y at - it an explanation to this problem and can it be rectified in some way (for example, by providing a driver update)?

  Hello

  First of all, I never heard a driver from the motherboard.
  There is a drive chipset or a graphics card driver. There is no such thing as a driver of the motherboard!

  Look, man. laptop should work fine even the AC adapter is connected or not connected
  If the laptop freezes while there might be a software problem, but in my opinion it could be hardware problem
  You must reinstall the operating system if the laptop would freeze always the issue might be related to hardware

  First of all the memory modules and AC adapter must be verified.
  If the problem persists even using new modules and AC adapter, motherboard may be affected.

• S110: Flash pictures are too dark when the zoom

  I just got a S110 to replace my S95.  I still know my Reiver way the new camera (despite its commonalities with the S95) and a whim that I noticed is that the moves by using the built-in flash are severely underexposed if I use any sort of zoom.  That is, they are exposed to good right to 24mm.  This was never a problem with the S95 (assuming that the subject was within reach of the flash at all focal lengths, of course).  Others have this problem?  Is there a setting that I'm on?  All my tests were in P mode (or program AE as the manual calls it).  Thanks for your help.

  Hello

  The scope of the flash on your S110 is only 7.5 feet on full telephoto, who is less than 22' on wide angle range. About the S95, it lists about 22' without a distinction between scale and TV. It will be less focused on telephoto than your old S95 at least in part because the variable aperture on your new goal tightens down closer that he did on your old.

  Both devices have a variable maximum aperture (lens opening). This means that the wide angle the lens opens wider it will open the telephoto. So less light can penetrate into the camera when you're zoomed in on something. It is measured by the number f /, and a lower f number means a larger opening. Your new camera is taken down tighter than your old a fact. S95 was f/4.9 max full telephoto. S110 is f/5.9 when the full telephoto. This difference in aperture is perhaps sufficient to reduce the scope of the flash on TV.

  I wonder if the S95 MIT had a concentration of telephoto flash, which may be missing on the S110? I've seen mentioned in the specifications at all well.

• Problem when the transformation command is called in a dialog box

  Hi friends

  I m a problem with the script UI. I tried different things to fix but I m not able to get success.

  The script code is correct. The problem is: when I run the script and click on the button "run"... Photoshop would need execute the function to "Transform", it is called and would allow me to freely transform the selected layer.

  BUT... it I cannot drag the axis of the inclusive to transform. It's because Photoshop is understand that my UI dialog is still active, even to call dlg.close (---(et je ne peux pas transformer depuis une boîte de dialogue est active)).

  See:

  function transform() {}

  var / / desc = new ActionDescriptor();

  Var ref = new ActionReference();

  ref.putEnumerated (charIDToTypeID ('Lyr'), charIDToTypeID ('Ordn'), charIDToTypeID ('Trgt'));

  desc.putReference (charIDToTypeID ('null'), ref);

  desc.putEnumerated (charIDToTypeID ('FTcs'), charIDToTypeID ('QCSt'), charIDToTypeID ('Qcsa'));

  var desc2 = new ActionDescriptor();

  desc2.putUnitDouble (charIDToTypeID ('Hrzn'), charIDToTypeID('#Rlt'), 0.000000);

  desc2.putUnitDouble (charIDToTypeID ('Vrtc'), charIDToTypeID('#Rlt'), 0.000000);

  desc.putObject (charIDToTypeID ('Ofst'), charIDToTypeID ('Ofst'), desc2);

  desc.putUnitDouble (charIDToTypeID ('Hght'), charIDToTypeID('#Prc'), 100.001);

  try {executeAction (charIDToTypeID ('Trnf'), desc, DialogModes.ALL) ;} catch (e) {};}

  }

  var DLG = new window ('dialogue', "imagens v10 Processamento", [0,0,0,0])

  DLG. Size = [120 120]

  DLG. Center)

  run var = dlg.add ('button', [0,0,0,0], "Executar")

  Run.Size = [80,30]

  Run.Location = (30, 40)

  run.onClick = function () {}

  DLG. Close()

  var doc = app.activeDocument

  var layer = doc.activeLayer

  layer.isBackgroundLayer = false

  Transform()

  }

  
  

  DLG. Show()

  What Miss me?

  Photoshop does not type ("range") window, so I don't know how to handle

  Thank you for the help

  Best regards

  Gustavo.

  You can't have multiple modal dialog boxes running at once. ScriptUI dialog box is modal and therefore your transformation function. What you can do for this example is move the transformation according to the dlg.show (); line.

  Photoshop has a "palette" window, but because it is modeless is really only useful to the progressbars or other messages "Please wait". For the example you posted if it were a script palette would not stop at dlg.show () and wait for the user to do something. He would try to run the following line and, not finding any, stops. At best you would only see the flash window before the script completed.

• Problem of animation in the film test

  Hi all
  
  I am so frustrated with a problem I have. I've not used Flash for a while, then maybe it's user error. I have a file that contains an animation such as text fading in and out and moving. He plays a lot in Flash, but when I publish it or test the movie it doen't play animation. Indeed, not only does not have the animation, but the text goes 'mad '. I played a bit with the post parameter and make them Flash 7, and I could see the movement of the text, but not the fade in and out. The setting were the Flash 9 player when I could not see any animation.
  
  I have Flash player 10 installed, and I'm authoring in Flash CS3 Professional. I hope someone can help, I would be very grateful. Thank you!

  Hi all

  I am so frustrated with a problem I have. I've not used Flash for a while, then maybe it's user error. I have a file that contains an animation such as text fading in and out and moving. He plays a lot in Flash, but when I publish it or test the movie it doen't play animation. Indeed, not only does not have the animation, but the text goes 'mad '. I played a bit with the post parameter and make them Flash 7, and I could see the movement of the text, but not the fade in and out. The setting were the Flash 9 player when I could not see any animation.

  I have Flash player 10 installed, and I'm authoring in Flash CS3 Professional. I hope someone can help, I would be very grateful. Thank you!

• audio playback when the film is different from the slide

  When I have a movie playback, the audio for the first slide is different from the audio when I read just one blade. Audio which reads to the first slide of the film's audio in slide 5 in my film. Help! I need to solve this problem in Friday morning... thank you for your suggestions!

  I fixed it-I exported audio the slide, then removed the slide audio, then imported it back in and it WORKS!

• Problem when the PWM signal combinning and analog signal TOGETHER!

  Hello everyone,

  first I DAQmx 6212, and I need to run the water pump small (9V - 16V) that should be driven by a PWM signal; I also have a motor (5V - 13V) for a water supply which must be controlled by an analog signal and it has built in a force feedback potentiometer, I logged onto this potentiometer correction + 5V the DAQmx and used the output voltage of the third extremety as a value to diagnose to know the position of the engine.

  My VI shows:

  1 is a normal meter production to create my PWMout signal.

  2 is an analog input, I use it as a PWMin to the LabVIEW to diagnose what is happenning in my pump water through the cycle and frequency.

  3 is an entry of the third extremety of the analog potentiometer.

  4 is an analog output that I used as power supply of the motor valve and I used an AC/DC amplifier for aplify signal the DAQmx and the motor road, between the two (3. 4.) I made a comeback with a few calculations, I had a P-controller to know the real position of the engine valve.

  My problem:

  When setting to 1. and 2. in the same VI only, I get an own PWM output with no problem.

  also with 3. and 4. in the same VI only i can control the motor valve without any problem.

  but when I put all these 4 set found in the attached VI, I have a problem as the engine valve turn continuously without stopping even if I change the position of the valve between 0 and 100%, I should mention that I see a PWM normal outside a signal on my oscilloscope, another thing to delete one of (1 or 2)  and run the engine valve VI works fine without any problems.

  so this my problem, if you can think of any solution please let me know.

  Thanks in advance for your help.

  Kind regards

  Caliente

  Here's your VI, slightly modified so the two analog inputs belong to the same task.  This if only for purposes of illustration, I him have not tested.  You will still need to do some debugging.

  While changing your VI, I noticed another potential problem with your original configuration.  You have configured the two tasks of AI for the same frequency, but read you 10000 samples of one of them and only 100 samples from the other (and throw it most of it).  Data acquisition data are buffered, and if you read as fast as you acquire, the buffer fills eventually.  If you read 10,000 samples of a channel, and the other channel acquires at the same rate, then when you read from the second channel you will get old stale data or an error full buffer.

• Problem when the copy of the newspaper

  I just bought a new Pro Laserjet MFP M276nw. When I copy the daily crossword from the newspaper, empty cells prints gray rather than white as was the case with my previous ink jet which was a HP 309 has. I don't see all the parameters that will change that outside the change of 'lightness' or 'dark' settings. Is there a solution?

  Hi RossL49,

  I see that you are having problems when copying. Daily crossword cells are printing in gray instead of white.
  I'll be happy to help you.

  A cheque to document all the copy settings to see if this will solve the problem.

  Fix the copy quality issues.

  You can define a new default copy settings once the problem is resolved.
  You can save any combination to copy the settings as default settings to use for each job.

  In the home screen, press the copy button.
  Press the settings button.
  Configure the copy settings to your
  preferences, then highlight and touch the
  Set as default button is new.
  Press the Yes button.

  To test the paper (newspaper - which is not bleached paper) print a worksheet with empty cells and make a copy to see if they are white.

  Please let me know if you need additional assistance.

  Thanks for posting on the HP Forums.
  Have a great day.