flash drive crashed; Formatt required; any way I can recover the data?

Similar Questions

• I would like to know if there is any way I can remove the 32-bit and keep the 64-bit without harming my computer

  I ran windows 7 installation on my computer using DVD who had 32 and 64-bit data and for that I currently have 32-bit and 64-bit installed in my computer. So I would like to know if there is any way I can remove the 32 bit and keep the 64 bits without harming my computer or stored data because now both bits is eating space on my C drive/partition!

  OT:

  Windows

  Why do you think you have "32-bit and 64-bit" versions of Windows 7 installed?

  If you installed the 64-bit version (which you will need if your computer has more than 4 GB of RAM and you want to use all of this RAM), you can see a few references to 32-bit architecture.  The 64 bit version of Windows needs these files in order to run software that is designed for 32-bit architecture.

  Perhaps the most obvious instance is the presence of the following two directories:

  C:\Program Files and C:\Program Files (x 86).  It is normal for both of these directories present in a 64-bit system.

  Maybe this will help--> 32-bit and 64-bit Windows: frequently asked questions

• Is there any way I can recover a lost file?

  I recently downloaded a document of my hotmail on a WordPad format account and continued to write about it once to open it on my computer in Microsoft Word and saved by pressing Control S. Whenever I pressed on that there was a message saying that a part of the documentation can be lost if it was re - open. Today when trying to find the document titled "Welcome letter" it is not found on the system at all.
  Is there a way I can recover what is a very important document.

  Hello

  Recuva - free - recovers files deleted from your Windows computer, Recycle Bin,
  map of the camera digital or MP3 player. And it's free!
  http://www.Piriform.com/Recuva

  Recuva - Forums - help here
  http://Forum.Piriform.com/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Any way I can remove the ball that says: you are looking for a printer, no printer not found on startup?

  I ran an 'r' on my new motherboard used, running the same HARD drive and now I guess he thinks that there is a printer somewhere and so... whenever I start the computer I get the pop up bubble looking for material, said OS os BIOS "find printer" and then "no printer not found" I mean it's just a hassle evry time having these "threaten to performance" If you want topics with my XP Pro SP3, basically I just use IE and working relationships. Any suggestion is appreciated.

  Hello

  -Have you ever had a printer installed?
  -You see something unusual in the Device Manager?

  Follow these steps and check if the problem persists.

  Step 1:

  Test the issue in a clean boot State.

  Note: The steps in the article to restart your computer as usual.

  Step 2:

  Uninstall and reinstall the USB controllers.

  http://support.Microsoft.com/kb/310575

• I typed something EXTREMELY important in Notepad and my computer off while I was asleep and I lost the paper now is there any way I can recover it, please help

  its all in the title

  No, unless you saved it. Whenever you type something long in any program, save it after you type a few words, and then click file | Save or Ctrl + S each paragraph or so to update the text is saved.

• Is there any way I can reverse the colors in this photo?

  How do I reverse the colors in this photo?

  

  Even more... How can I change the tone of the blue color after I reverse it?

  Thank you...

  

  1. choose the eyedropper and click on the Earth. It will become the foreground color.

  2 choose the magic wand, make sure that contiguous is disabled in the Options bar and select the Earth.   Cmd + J to put it on its own layer.

  3, select the lock in the layers panel to lock the transparent part of the layer of Earth.

  4, edit > Fill and fill it white

  5. Add a layer below the layer of Earth mass by holding the command key and clicking the new layer icon in the layers panel

  6 Edition > fill with the foreground color of (blue)

  You can lighten the blue using levels or choose and altogether different color

• I installed windows 7 from XP and reinstall Firefox. However, I have lost the list of favorites. Is there a way I can recover the previous the "Favorites".

  Installed Windows 7 Professional custom in the required form XP. All the favorites were lost in Firefox and had to reinstall Firefox.
  Explorers has maintained the Favorite list, I had to explore - quite different from Firefox.
  Check the programs created separately by 7 to include the XP file. Favorites, registration is not relevant to the list lost on Firefox reinstall.
  Question: Is it possible that I can get back the original Favorites listing lost when the 7 install, or is it 'gone with the wind "?

  I have not read what is happening in an installation of XP to 7. You can find this file on your system:

  C:\Windows.old
  

  If so, you can find one of these:

  • C:\Windows.old\Documents and Settings\your user name
  • C:\Windows.old\Users\your username

  If so, your old given Firefox might be in there. To explore more, it would be useful to set windows to display the hidden files and folders. This article has the steps: http://windows.microsoft.com/en-us/windows/show-hidden-files

  Then search either:

  • \Application Data\Mozilla\Firefox\Profilesyour usernameC:\Windows.old\Documents and Settings\
  • Your username\AppData\Roaming\Mozilla\Firefox\Profiles C:\Windows.old\Users\

  Here you can find one or several folders named random semi. Who has most recently updated content is probably the one you want to restore from.

  Bookmarks only

  Go down the old bookmarkbackups folder and copy the last two backups in a location such as the desktop.

  The restore feature will replace the bookmarks in Firefox by default (and what you added since the reset) with all like bookmarks. If you want preserve newly added bookmarks, use the first, export function before the restore, then the import function later. The following articles have details:

  • (Optional) Export Firefox bookmarks to an HTML file for backup or transfer bookmarks
  • Restore bookmarks from a backup or move them to another computer - to access backups on the desktop, use the command 'Choose file' menu
  • (Optional) Import bookmarks to an HTML file

  Success?

  Complete restoration

  This post has my suggested procedure to resurrect your old wide profile in your new installation of Firefox. Please note the use of the copy instead of move throughout the process. This allows you to try again if it fails somewhere along the way.

  https://support.Mozilla.org/questions/1024189#answer-638319

  A little luck?

• Flash drive (memory Sticks) into any USB port of my computer is unable to display.

  When I insert a flash drive (memory stick) into any USB port on my computer that the information stick memory does not appear on my screen, so I'm unable to access or open the content of sticks of memory.

  Following the advice of medions I restored my computer to its factory settings. So far, which seems to have cured all the defects.

  Once more can I sincerely offer my thanks for your attention and valuable advice
  Robin Jones.

• If my HARD drive crashes and I have to replace, can I reinstall Windows 7 on the same computer?

  Packed HARD drive

  If my HARD drive crashes and I have to replace, can I reinstall Windows 7 on the same computer? How the product key is affected? He still believes that I am still on the old HDD?

  If my HARD drive crashes and I have to replace, can I reinstall Windows 7 on the same computer? How the product key is affected? He still believes that I am still on the old HDD?

  Yes.

  Not at all.

  N °

  If you have Windows 7 with an OEM license agreement (it came pre-installed on the computer is the most likely scenario for this, but you can buy OEM copies so) or you have a license to retail (upgrade or full version) - the way your question is worded is very specific - you * can * install Windows 7 costs/clean on this same system as much as you wish.  A new hard drive won't stop you activation - well that at some point, you need to activate by phone, as opposed to over the Internet.

  Now - if the motherboard is replaced and it's licensed OEM and replacement was not that of the OEM that probably set up your computer...  Then you have a problem.

  Unless you happen to have a license of Windows 7 retail sales, so it is not related to the computer (motherboard).

• Have 3.6.28 like my boyfriend, hate v4 layout and refusing to update. Today, that he found his update automatically. Any way I can avoid this cruel fate?

  When its automatically updated to 4 against his will, he lost everything... cookies, bookmarks, history, etc. He is also seen extreme lagg now and everything is so slow for him, especially selected bookmarks... If it moves the mouse over the list and rapidly down the highest point is unable to follow and it bounces always up and down trying to catch up for a while after that it stops.

  I really want to share this horrible fate, I love my FireFox 3.6 and use it over other browsers. I don't want to just lose and be forced to this provision of the terrible version 4, if I was I might as well switch to Chrome when I start again from scratch, because it is at least a bit more tolerable (though of course less than FireFox 3.6) design.

  Is it all, ANY way I can avoid this and not have my torn 3.6 away from me as my boyfriend did?

  in the Options window > advanced Panel > Update tab > Firefox updates > CHECK never check for updates (not recommended: security risk), click OK to save, exit firefox and restart.

  https://support.Mozilla.org/en-us/KB/options%20Window%20-%20Advanced%20panel#w_update-tab

  BUT don't forget not 3.6.28 is out of date, see: http://www.mozilla.org/en-US/firefox/all-older.html

  Thank you

  Please check 'Resolved' the answer really solve the problem, to help others with a similar problem.

• I'm missing codecs for windows media player 11.0.6002.18311 any way I can reinstall it or get download missing codecs?

  I'm missing codecs for windows media player 11.0.6002.18311 any way I can reinstall it or get download missing codecs?

  Finally, I fixed my problem of codec.  It turns out that it is the 6.9.2.26 codec DIVX version.  I uninstalled all DIVX software and re-installed 6.8.5 and now everything works.  Windows Media Player 11 now play AVI encoded with mjpg, as well as Adobe first Elements 4 camera.  In addition, first elements will now load a DX50 encoded AVI, who had stopped working as well.

  I wanted to just send you this.

• I lost some data during a copy and paste procedure between folders on a thumb drive... any ideas how to recover this data?

  I lost some data during a copy and paste procedure between folders on a thumb drive... any ideas how to recover this data?

  I lost some data during a copy and paste procedure between folders on a thumb drive... any ideas how to recover this data?

  If you did a copy and paste, the original files are left intact when they came.  If you did a cut and paste, they are lost if you do not paste them and your paperweight (the location of storage to copy or cut and paste) was allowed.  It would be cleared if you did quite exemplary or cuts too fill it, or if you rebooted.

• Any way to get around the problem of compaibility ITE 8211 ATA/ATAPI

  Any way to get around the problem of compaibility ITE 8211 ATA/ATAPI

  Hi EwenWood,

  You want to know a way around the issue of compatibility ITE 8211 ATA/ATAPI. I will help you in this problem.

  According to the Windows 8 Compatibility Center, we have all the information available for ITE 8211 ATA/ATAPI. Click here to know more: http://www.microsoft.com/en-us/windows/compatibility/win8/CompatCenter/ProductViewerWithDefaultFilters?TempOsid=win8&Locale=en-us&TextSearch=ITE%2B8211%2BATA%252fATAPI&Type=Both&CurrentPage=0&TotalPages=1&ShowCriteria=0&SortCriteria=Relevance&Compatibility=Unknown&LastRequested=14

  I suggest you to contact the manufacturers of devices for updated drivers.

  I hope this helps.

• my computer crash in a bad way, how can I active in a new computer?

  my computer crash in a bad way, how can I active in a new computer?

  Original title: cumputer 10-7 m

  Use:

  Activation of the phone:

  1. press the Windows key + X , and then click run, and then type: slui.exe 4

  
  

  2. then press the ENTER"" key.

  3. Select your "country" in the list.

  4. choose the option "activate phone".

  5. stay on the phone (do not select/press all options) and wait for a person to help you with the activation.

  6. explain your problem clearly to the support person.

• Please help me renew my membership - I have a lot of management design/photo to do today and no way to access the software!  I have a subscription through my school teacher and don't see any way to renew under the "regime".

  Please help me renew my membership - I have a lot of management design/photo to do today and no way to access the software!  I have a subscription through my school teacher and don't see any way to renew under the "regime".

  To the link below, click on the still need help? option in the blue box below and choose the option to chat or by phone...
  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Creative cloud support (all creative cloud customer service problems)
  http://helpx.Adobe.com/x-productkb/global/service-CCM.html ( http://adobe.ly/19llvMN )