Flash.ocx error at startup of the system

Similar Questions

• Error at startup of the system

  Hello

  I used the product (details as below):

  Product name: HP Pavilion a1210in (bought in 2005)

  Operating system: Windows XP

  My computer worked perfectly well, all of a sudden when I booted the system and facing this error message:

  "Reboot and select proper boot device .

  "or insert a bootable media in the selected boot device and press a key.

  I rebooted the system and checked in the startup configuration menu, and he showed not the hard drive. A Serial ATA drive is installed in my PC. But only 3 m-LITE-ON COMBO SOHC - 4836 K (which is the CD/DVD player combo) appears in the list of boot devices.

  I removed and reconnected the cables, (hard disk SATA connection), in the processor, but it does not help as well.

  What are the possible options now (Do I need to get a new hard drive, if yes, then which ones do I need?)

  Help, please.

  wb2001: ' find a replacement hard drive is difficult because this system uses a SATA Ultra DMA-150.» This is commonly called Sata150. Most discs hard Sata300 have riders to make the drive used in Sata150. (Rider is not included). »

  PiyushKapoor: "I actually don't know much about Sata 150/300, then you mean say that there is no alternative option? So what are the possible solutions now?

  You must locate a Sata300 drive. She should have jumpers on the backend that can be set to Sata150. Examples:

  http://www.hardwaresecrets.com/article/everything-you-need-to-know-about-serial-ATA/27/3

  http://www.wdc.com/en/library/Eide/2579-001037.PDF

  http://knowledge.Seagate.com/articles/en_US/FAQ/195251en

• C:\windows\system32\spool\DRIVERS\x64\3\LXCGtime.dll error at startup of the system

  Original title: Run DLL error?

  Lately I get this message at the beginning upward.

  Error in C:\windows\system32\spool\DRIVERS\x64\3\LXCGtime.dll

  Missing entry:_RUNDLLEntry@16

  What this means and how can I fix this :D

  Thanks a bunch

  Hi Christalligator,

  Try these steps and check the result.
  Step 1: If you have connected the printer, we recommend you to reinstall the printer driver and check the result.

  Step 2: Restore the computer to an earlier time
  see How to restore Windows XP to a previous state .
  b. check if the problem persists.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• "ASCTray.exe does not work because rtl120.bpl is not found." error at startup of the system.

  Original title: how to install ASCTray.exe

  Whenever I open my computer, I get a window saying the ASCTray.exe doesn't work because rtl120.bpl is not found and recommended relocation. How do this reinstall.

  Its share of the advanced system of care.  I would uninstall and then reinstall.

• Computer hangs at startup of the system

  Original title: computer crashed win Defrag

  I recently picked up win defrag... I have windows xp and tried to put it in safe mode, and it froze.  Now it is completely empty when I try to start :(  I removed my hardrive and crossed norton key usb connected to another computer.  It's still frozen... I'm on the right track?  How can I manually remove the infected files from another computer?  Please help-

  K

  Hi katkit,

  1 did you stop defragmentation on the drive?
  2. using Norton on another computer, were you able to remove the infected hard disk files?
  3. do you get an error at startup of the system?

  You are on the right track if your hard drive is infected with the virus. However if you try to do something else, then I think not that it is a good idea. After scanning of the hard drive, connect it to the computer problem and start insafe mode.

  Please provide us with more details, so that we can better help you.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• System operating error at startup of the service OracleMTSRecoveryService

  I am facing the following problem when installing Oracle 11 g Release2 database at Microsoft Window 32 - bidt
  
  System operating error at startup of the service OracleMTSRecoveryService
  
  Note: Once I have already ionstalled this database on the same machine and after that I the deleted of my D drive manually by the judgment that these services. Now, after some data, I'm againg installation but it has this error.
  Please help me how to solve this problem.
  
  Thanks in advance.
  Yassen

  "OS error" is not so convincing, check the log events for the purpose. Perhaps you don't need this service, if you are not using MTS:

  /*
  ORACLEMTSRecoveryService allows Oracle databases to use as resource managers in Microsoft Transaction Server.
  */

  So the quick and dirty solution disable the service.

  Werner

• When trying to access the tab elements of remuneration for work of the buyer to get the error you encountered an unexpected error. Please contact the system administrator for assistance.

  When you try to access the tab to pay the buyer work center items get error:

  You have encountered an unexpected error. Please contact the system administrator for assistance. (Without any additional information)

  Please need help on how to solve this problem.

  Thank you

  Rambeau

  It seems bug-

  Please see - Center of the buyer: make an Exception when clicking on PAY tab ELEMENTS (Doc ID 1993378.1)

  Kind regards

  Kiran

• I've updated Adobe Flash to 15.0.0152 via the system of preferences update in the Flash icon. But no DMG file has been downloaded. This never happened in the past. Why not?

  I've updated Adobe Flash to 15.0.0152 via the system of preferences update in the Flash icon. But no DMG file has been downloaded. This never happened in the past... Why not?

  Since your any question related to an external site and does not clearly represent the destination of the link, I have the irreversible.

  For completeness, here is the link to zero Google announcement that you referenced.

  Google online security blog: project announcing zero

  In case you weren't aware, our engineering organization works closely with zero Google and many other partners in industry and universities to make sure that we are adapting to the latest threats in the two emerging research and in the real world and the security of end users is of paramount concern.

  To answer your specific questions, when you update for Flash Player native to the Panel, we provide a streamlined workflow that downloads the installer to a temporary directory, run it and finally deletes it at the end.

  If you are not comfortable with this mechanism and want more visibility and control over the installation process, you can always download the installer directly from http://get.adobe.com/flashplayer and install manually.

• Satellite1900 dull display at startup of the system + lack of functions in the system tray

  Satellite 1900-803 OS - XP - Home (SP2) has developed an error at startup, it starts, but has the matte screen (the equivalent of the lowest screen brightness setting) and a few icons missing in the system tray in the task bar, (ie. icon remove a security device, mousepad icon & hide the unused icon button), only fix I found is to do a system restore , that everything returns to normal, icons etc, restored once the screen not more problems occur even after hibernation, (restore point should be a point of automatic system generated manually created)

  Have you checked the drivers to display, bios updates, control panel in utilities to display etc., all seem correct and up-to-date, can anyone help, I checked the forums but not found anything similar, I checked, the reset screen FL inverter connections, but no change, dysfunction on AC or battery.
  suspect a software problem? BIOS problem?
  machine is 4 years old, and no real probs so far a complete system don't have reinstall (to the iradicate virus that I couldn't get rid of all ok after that, enough compatent during the disassembly of the machine and basic repairs but depths of software are becoming my cleats of knowhow:D about 1 year ago
  any help would be received with gratitude
  concerning
  Iain

  Hello

  I read a few topics on missing icons in the system tray. It seems that it s is a windows bug.
  Please check these messages from the forum:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=14392
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=15065

  Maybe it helps.

  I can t say too much on the matte screen. Of course, if the Fl inverter is dead the display appears dull but you issue sounds a little different. The problem doesn't persist all time. That's why I think that it s not a frequency inverter. Usually, the Toshiba power saver is responsible for the brightness of the screen. You should check the settings of the single power supply modes. Maybe you switched between different modes of energy and the brightness of the screen has also been changed.

• Error on startup: "application (the file name is) is not a valid windows image, check against your installation diskette."

  computer startup happens on the screen with "application (the file name is) is not a valid windows image, check against your installation diskette." It can be any name of a file that appears, if I click ok it will.  Anyone know what I should do now. Thank you

  Hi LorraineMatthews,

  ·         Did you do changes on the computer before the show?

  ·         What is the exact error message?

  ·         Are you able to boot to the desktop?

  Follow these methods.

  Method 1: Follow these steps:

  Step 1: Start the computer in safe mode and check if the problem persists.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After the boot minimum troubleshooting steps, follow section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start and then click Run.

  (b) type msconfig and click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal Startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 2: Scan the file system (CFS) auditor to repair corrupted files.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

• How to fix a flash ocx error?

  When my PC is slowed with a running program or to a Web site, IE Pogo.com. I'm having a 'flash ocx' window pop up. What is and how to fix it? I didn't for a while, and the only way that I got rid of him before was to back up the system in place for 7 days.

  Hello

  1. you remember changes to the system before this problem?

  Flash.ocx is a flash plug-in which is responsible for adobe flash player run on the system.

  Maybe it's that the flash drive is gone corrupt. I would reinstall it again on the system and check if the problem is resolved.

  Before installing Adobe flash player on the system, make sure that all previous versions of Adobe flash player uninstalled from the system. Download the utility on the site mentioned below, install it and run it on the system.

  Step 1: Uninstall Flash Player

  http://kb2.Adobe.com/CPS/141/tn_14157.html

  Once you uninstall Adobe flash player, and then try to download the latest version of Adobe Flash player at the Adobe site.

  Step 2: install Flash Player.

  http://get.Adobe.com/flashplayer/

  (a) click on the above mentioned link.

  (b) download and install Adobe flash player.

• Taskbar freezes at startup of the system

  Hello
  Since last week, I have problem with my windows 7 and I don't know how to solve.
  problem:
  Immediately after my pc on (boot is ok) my lower left panel freezes and does not meet all clicking. Also when I open a file, I can't work with this, because it does not.
  This is the only way how to fix - by pressing ctrl + alt + del. Nothing else.
  I must say, that I tried to reinstall it 3 times and after each reinstallation, it has the same problem.
  I tried to use the command sfc/scannow (all ok), I tried to scan the HARD drive - without errors and verification through the diagnosis of memory did not appear any errors of memory.
  I don't really know what to do. This problem occurs on the own w7, x 84.

  Thanks for help

  Original title: low start Control Panel freezes

  Hi Soldii,

  Thanks for posting your query in Microsoft Community.

  • You did it any significant hardware or change software on the computer before this problem?
  • You get the error message? If Yes, what is the exact error message you get?

  I can understand that the taskbar freezes when you boot your system.

  It seems that some third party software startup service hinders the normal starting procedure and so you are unable to work with the taskbar.

  I would suggest trying the following methods and check if the problem persists.

  Try to start the system in safe mode and check if the number is reproduced. If this isn't the case, then clean the computer starts and check if that helps.

  Step 1:

  Safe mode is a diagnostic mode in which you are connected with only the minimal necessary services and active pilots. Check if the number is reproduced.

  Start your computer in safe mode

  Step 2:

  Put your system to the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.
  How to perform a clean boot in Windows

  Note: See "how to reset the computer to start normally after a boot minimum troubleshooting" to prepare the computer to start as usual after a repair.

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• Satellite A10 - failed at startup, check the system, then press F1

  Hi, I have this laptop old to repair.

  Main problem is that it starts. Display errors after all start-up:

  -#1 error - broken cdrom IDE
  -Check the system, then press F1 - ppl say it's a low cmos battery
  -File Boot.ini file is missing - is unable to repair itself, so that the CD does not work.

  Now, it looks like this. I turn on the laptop, shows the toshiba welcome screen, then theres the boot.ini of message end missing, begin on c:/windows and bam the phone keeps reseting showing again and again the same error. When I press ESC theres the message check system, then press F1 or IDE #1 - random error.

  If anyone has had this problem, Ive looked on the internet but did not get a decent answer, what to do with these cases.
  Looking forward to some good quality advice :)

  Hey,.

  I think the case is clear: Windows may start t because the boot.ini file is missing. You would be able to repair this file or reinstall Windows, but your work isn't CD player I think you need to replace the CD/DVD drive to get rid of this error.

  Then contact an authorized service provider, or take a look on eBay for second hand parts. Maybe you can find a compatible CD/DVD player that will work.
  Then you can boot from the Windows disc and repair Windows System.

  Of course, you can also restore factory settings using the Toshiba Recovery disk, but as a result, you must work of CD/DVD drive. ;)

• Satellite Pro A10 - IDE 1 # error at startup to the top

  HI, I have a Satellite pro A10 and everything is working very well in recent years to date.
  A few days ago I started having a cd read error / invalid dvd disc format still drives fine on all the other PCs work.

  Today as I get #1 error on boot up IDE... the laptop is always standard when I got off the shelf. thinking the drive might be dead due to wear I replaced the drive with a drive to work and I still get the same error. I removed the completely STRANGE and yet to come.

  I also updated the usb floppy bios that has been a success. and the best part of all this. the dvd - rom supplied with the laptop works fine in my other a10 tosh!

  Someone at - it ideas. I really need to replace the motherboard if I can help it. This is the only problem with the laptop.

  THX in advance people.

  Hello James

  IDE 1 # error is typical when ODD is not accepted by the system. The reason may be defective drive or the use of non-compliant readers. The fact is that each player can not be used with all portable models because of the allocation of the different pins.

  In your case, it is really strange that the work by car on other A10 but not on this one. Because of this, I presume that there may be a problem with connectors. I'm afraid there is not much to do. You can try to check out them and see if they are clean and not oxidized.

  Sorry, but we cannot speculate what may be the problem but, as you know, only intensive test may give you more answers.

  Good luck and let us know if you will find what is the problem of resources.

• Qosmio F10-100: startup problem - the system protection failure

  Hello

  A few days ago, I started my Qosmio QF10-100 and an error, it says:

  Alert: System protection failure.
  Password =...

  I 'google' the error nothing helps, the solutions are not compatible with this type of laptop and I'm not going to pay someone to fix it if it's just a simple password.

  I would like to know what is the default password, because I'm 100% sure that I have not put it, or if there is other ways to restore. My guarantee is only from 2004-2005, it is out of the question.

  Looks like a rare problem, hopefully it's fixable.

  Thank you
  Matt.

  Hello

  For me, it looks like a BIOS password has been set. Maybe I m wrong, but in my opinion it should be set a BIOS password or maybe a drive HARD this password which is hard to say.

  Unfortunately, if you n t know the password you will not be able to start Notepad :(
  But buddy don t worry, the local ASP would be able to remove a BIOS password.

  No matter if you warranty is valid or not. You should contact the guy in your country and have to ask for help.

  I'm not sure how much it would cost but I n t thinks it might be expensive.

  Goodbye & good luck